Thunderbolt to Firewire 800 Adapter

I have a 2010 MacMini that I want to add the Pegasus Tech J4 RAID Drive to. It is Thunderbolt only. Does anyone make a Thunderbolt to FireWire 800 adapter? I know Apple makes the reverse, FireWire 800 to Thunderbolt.
Thanks for the help.

All Thunderbolt adapters are only from computer to
peripheral. There is no adapter that works in the
opposite direction.
Therefore, if you want to use the Pegasus Thunderbolt
device, you need a computer with a Thunderbolt port.

Similar Messages

Thunderbolt to Firewire 800 adapter not enough power

Warning to those who own G-Technology G-Raid Mini (Gen3) and a Macbook Pro Retina.
I just received my thunderbolt to firewire 800 adapter from apple yesterday. I hooked it up to the rMBP and plugged in my G-Raid Mini, the G-Raid Mini powers up, but then proceeds to make a beeping noise. The G-Raid Mini will not mount over bus-power thunderbolt to firewire 800 adapter. Although when I plug the G-Raid Mini into wall with power supply and then plug in the thunderbolt to firewire 800 adapter, the drive mounts.
It seems there is not enough thunderbolt bus power to mount a G-Raid Mini (Gen3)...
Has anyone heard otherwise? Can they confirm this doesn't work for them either.
Thanks.

Same for me.
Luckily I tested it is advance of playing a gig at the weekend using Serato.
Complete JOKE!
I can't believe that Apple hasn't considered the fact that the majority of creative professionals need high capacity fast mobile storage.
I suppose we now need to wait for 2Tb Thunderboth enabled SSD drives which by my reckoning will cost more than the MacBook Pro!!!!

I am using IMovie 11 with a new iMac. Unable to import video from a Panasonic PV-GS400 mini-DV camcorder using a Firewire IEEE 1394 400 cable connected to a Firewire 400 to 800 adapter which is then connected to a Thunderbolt to Firewire 800 adapter.

How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac? I have a FireWire IEEE 1394 400 cable connected to the camcorder. Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable. I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer. My camcarder is still not recognized.

I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
The 9 pin to 4 pin cables are available at reasonable prices here, for example.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

Are there any problems using the Thunderbolt to Firewire 800 adapter?

I found the only way to migrate my old mac to my new i
mac was to use a firewire 800 to thunderbolt adapter, or ethernet. Am I correct?

Welcome to the Apple Support Communities
You can also migrate wirelessly > http://support.apple.com/kb/HT4889
However, I recommend you to use FireWire to migrate from your old Mac because it will be much faster than Wi-Fi or Ethernet, so if your old Mac has got a FireWire port, buy the Thunderbolt to FireWire adapter for your Late 2012 iMac and migrate from your old computer

HT201338 Can I connect a firewire 400 to firewire 800 adapter and then a firewire 800 to Thunderbolt adapter(standard Thunderbolt to firewire adapter) together to digitize video from a miniDV video camcorder?

I have a 10 year Canon MiniDV camcorder that I used to connect via firewire to digitize the data. Now my IMac only has a Thunderbolt connector and my camcorder uses the older firewire 400 standard. I would like to digitize the video into my IMac. How can I do this?

I did a little looking around and found a Thunderbolt to Firewire 800 adapter, and then a Firewire 400 to 800 adapter, but no Thunderbolt to Firewire 400. Amazon and Apple stores had the Thunderbolt to Firewire 800 cable and Amazon had the Firewire 400 to 800 adapater.
Wherever you get the cables, ask them if it will work OK with what you want to try and do - if they don't know make sure you can return if there is a problem. I think it will because the Thunderbolt side is so much faster than what the camera can pump out to it. If it were the other way (Thunderbolt device to a Firewire computer I would expect that to fail since the Firewire could never keep up with the data rate of the incoming Thunderbolt device).
Maybe if you have a local Mac user group or a friend with an older mac with a firewire 400 port you could do it this way too?
Good luck

Thunderbolt to FireWire 800

Hey,
Just wondering - where is the Thunderbolt to FireWire 800 adapter? Apple promised it by the end of July. I cant find any news.
This is a big determining factor in whether or not to return my MBPR.
Thanks!

Look at the column to the right - "More Like This" - there have been a number of discussions as to when the adapter will be released. Some confilicting information, but I would expect it within any time between this week and sometime in September: I don't think that anyone here really knows for certain.
Sorry,
Clinton

Thunderbolt to Firewire 800 external drive problems

I recently upgraded from a MacBook Pro 17" early 2011 to a MacBook Pro Retina 15" (early 2013). I have a Drobo and two Seagate 4TB external drives, all connected via Firewire 800. So, I added a Thunderbolt to Firewire 800 adapter and, it seemed, life was good.
I keep my large iTunes Movie and TV show collection on the Drobo. Since transitioning to the new MacBook, I have had a number of issue with watching movies on my Apple TV 3. Randomly, and periodically, the movie appears to be corrupted - the audio track skips/loops and the image is horrible macroblocked, as if the file is damaged. When I check the movies on the Drobo, opening it with Quicktime on the MBP, it plays just fine at the same spot it appeared damaged on the Apple TV 3.
A second symptom is this: I can no longer re-encode video with Handbrake with the source and target files on the Drobo - it gets some portion of the way through and it just stops, leaving the video partially encoded; again, at random locations/offsets into the video and not the same spot twice.
My initial thought is that connection to the Drobo is dropping out and coming back, on its own, but long enough to cause the above problems.
Is anyone else seeing this issue or something related when using the Thunderbolt to Firewire 800 adapter with large drives?
Thanks, in advance.

Update: I exchanged the Thunderbolt to Firewire adapter and the issue persists. I have a Drobo that I used with my previous system, a PowerMac G5, and never had any issues like this.
It does not matter what software I use. But at some point video playback will suddenly become garbled. If I start the video from the beginning, sometimes the garbled video will start sooner but never later. A restart temporarily resolves the issue. If I copy the file to the local hard drive the video will play back garbled. This is indeed a very strange issue. The issue behaves like a bandwidth bottleneck.
I was having this issue prior to upgrading to Mavericks.
Fred K
iMac (Late 2012), 3.4 GHz i7, GTX 680MX, Fusion Drive, 24 GB RAM, Drobo (Firewire via Thunderbolt)

Thunderbolt and FireWire 800 / 400

Hey gang!
I have a 2011 MacMini and a theoretical question. I have a FW800 external drive connected to it for my TimeMachine backup. I also have a FW400 audio capture box I use from time to time.
I used to chain the drive and audio device, but that slows the FW chain to 400 speeds instead of 800. If I connect the FW800 drive directly to the Mac mini, and the FW400 audio capture box to the Mac min via the Thunderbolt-to-FW800 adaptor(via a small 800-to-400 converter plug), will that slow the whole bus down to 400, or will they work at independent speeds?
I assume the Thunderbolt and FW chips are indepent and that the would NOT slow down speeds, but I would like to hear a more technical answer to my question.
Thank you in advance.

Apple sells a Thunderbolt to Firewire 800 cable here. Connect directly to your external drive with this cable, and the FW400 audio capture box (with adapter) to the Mini's FW800 port.

The Thunderbolt to Firewire 800 cable?

I have a JVC digital video camera, and have lost some of the cables. Will a Thunderbolt to Firewire 800 cable connected with a Firewire 800 - Firewire 400 cable (same as ieee1394?) transfer the videos to my MacBook Air?

The Thunderbolt to FW 800 cable provides a FW800 port that you can plug into. You can see what it looks like here. If you have a FW cable that will connect to your camera and terminates in a FW800 plug, that should work.

Thunderbolt to Firewire 800 Adaptors... any available?

Hi all,
I'm probably going to buy a 15" Mac Book Pro whenever they are released later this year and have a strong suspicion that Apple will drop the Firewire 800 port in favour of Thunderbolt. I guess this really comes as no surprise but hopefully I'm wrong and they keep it. Anyway, in the event that they do remove it I'd still like to be able to keep using my external FW800 HDD so was wondering if any cheap adaptors are on the market yet? I've looked around but can't seem to find anything. Anyone care to enlighten me?
Thanks in advance.

The adaptor from Sonnet is for an Express34 card and it does not read SXS cards for Sony cameras!
I do not find a Thunderbolt to FireWire 800 on the Sonnet website. Found this, however, but it won't be released until this summer:
http://www.engadget.com/2012/01/09/belkin-details-thunderbolt-express-dock/
It seems that Belkin will have the solution for all USB and FireWire devices that you will want to connect with the new 15" MacBook Pro coming out, supposedly at the end of April:
http://www.allvoices.com/contributed-news/11861907-2012-macbook-pro-redesign-on- its-way-to-apple-stores
I'm in the same boat as you, so hopefully this helps.

Thunderbolt/firewire 800 adapter

Does the thunderbolt to firewire adapter really works?
Have you noticed any change in speed? I'm reading a lot of negative reviews, and I need one!!!!!

If your iMac model year is correct at the bottom of your post.
iMac (24-inch Mid 2007)
That model year doesn't have a Thunsderbolt port and that adapter won't work.
If you do have a newer iMac that does have a Thunderbolt port the TB to FW adapter does work. the complaints are about it not supplying enough power to devices connected to it like a Real FW port did.
I have one but only used it once or twice to connect a second FW device to my Late 2011 MBP that does have one FW port.

Thunderbolt to firewire 800 coverter vs. usb 2.0

Have an external hard drive that has firewire 800 and USB 2.0. Trying to decide if the firewire 800 to thunderbolt adapter or using the straight usb is the better connection. Drive holds my iTunes Library and VM Fusion "drive".
Any ideas?

Since Thunderbolt is so much faster then FW800, you should be able to see as good a performance on FW800 as the disk drive is able to provide. The drive itself is going to be the weak link in your chain.
Allan

Thunderbolt to FireWire 800 Adaptor for video capture

May need to purchase this as my new LaCie D2 Quadra scratch disc drive is using the one firewire port I have (had all kinds of problems using USB 2 port)
So I need another port to capture video, my cameras use firewire only. Wondered if any one has successfully used this adapter to capture HDV and DV video?
iMac mid 2011 21.5 inch (10.7.5), FCP7, HDV and DV video source

You can use the Thunderbolt to FireWire adapter for all peripherals that use FireWire, so it will work without any problem to capture video > http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r

External Drive Speed - Thunderbolt vs Firewire 800?

Hi Friends,
I'm looking to upgrade my external firewire 800 enclosure/drives to speed up editing/rendering in FCP 7/X. Currently this is the config I'm using with my MBP:
- Vantech Nexstar dual 3.5" sata external hard drive enclosure ( http://www.vantecusa.com/en/product/view_detail/277 )
- 2 x 1.5TB Seagate Barracudda 3.5" Sata 7200rpm hard drives (http://www.amazon.com/Seagate-Barracuda-7200RPM-Internal-ST31500341AS-Bare/dp/B0 0066IJPQ)
I'm interested in upgrading to an external thunderbolt enclosure like this:
- Pegasus J4 2.5" quad sata3 external thunderbolt hard drive enclosure ( http://www2.promise.com/storage/raid_series.aspx?region=en-global&m=192&rsn1=40& rsn3=62 )
- 4 x Seagate Momentus XT 2.5" sata3 7200rpm hard drives ( http://www.seagate.com/internal-hard-drives/laptop-hard-drives/momentus-laptop/ )
I know I could get better drives, i.e. hybrid hdd/ssd, or just ssd, but that's not in the budget right now.
Can anyone tell me if the thunderbolt enclosure with 4 x 2.5" sata3 drives will read/write much faster than the firewire 800 enclosure with 2 x 3.5" drives?
Thanks in advance !
- Cindy

Hi Meg,
I may have given the wrong Vantech link, since the Vantech Nextstar I'm currently using has FW and USB, thanks!
Meantime I'm waiting to hear back AGAIN from the Pegasus manufacturer - ends up I've found a number of reviews stating the Pegasus J4 is plenty fast for FCP use!
- Cindy

Is daisy chaining on a macbook air through the thunderbolt to Firewire 800 adaptor possible?

Hello,
I am attempting to daisy chain two Glyph portagig 50's and connect them to my MacBook Air. They are both 1TB, 7200RPM drives and are both connected to external power. When I attempt the daisy chain only the first drive mounts and when I attempt to connect the second drive to it, the first (mounted) drive ejects and the second drive does not mount. Both drives need to be turned off and on again in order for either to be remounted.
I contacted Glyph and they have said that it is most likely a problem with the Thunderbolt to FW800 adaptor. Which leads me to wonder whether or not daisy chaining through the adaptor is even possible.
Any help would be greatly appreciated!
My MacBook Air is a mid-2011 model with a 1.8GHz Core i7 processor and 4GB of RAM, if that helps at all.
Thank you!

GeorgeFlick
They are both 1TB, 7200RPM drives and are both connected to external power.
Eeeek, dont do that anymore. 2.5" dont need power, and daisy chaining them BOTH thru thunderbolt, your Air is likely kicking one because youre mostly likely sending feedback THRU the firewire.
Some inventive folks unknowingly have powered (3.5" need power, 2.5" DONT) 2.5" thru USB and found out the hard way they deep fried circuitry.

Thunderbolt to Firewire 800 Adapter

Similar Messages

Maybe you are looking for