Thunderbolt to firewire adaptor does not work when daisy chaining firewire devices

Hi,
I just purchased the Thunderbolt to firewire adaptor for my new late 2012 iMac.
It works when connecting a single firewire device, but when I daisy chain another drive, the first drive disconnects and nothing mounts.
I am trying a Hitachi G-Raid and a couple of WD My Studio II hard drives. They all work when connected directly to the adaptor, but not when more than one drive if daisy chained with firewire.
Has anyone got firewire daisy-chaining working with a thunderbolt adaptor? (just to clarify I am not refering to thunderbolt daisy chaining, as the adaptor is an end-of-chain thunderbolt device).
Thanks

Yikes, that's sad to hear.
I can't test it, no TB here, but are all these drives self AC powered, ie. no bus powered drives?

Similar Messages

My thunderbolt gigabit ethernet adaptor does not work on hotel ethernet connections, My thunderbolt gigabit ethernet adaptor does not work on hotel ethernet connections

I recently purchased a thunderbolt ethernet adaptor and I realised that when I am out of town (I travel alot) the adpator does not work with the hotel etherenet network regardless of whatever hotel I am staying at. Does anybody else have this issue? is there a software or update I need to download? help!

maybe it just takes a lot longer to acquire an IP address at the hotels vs your home, where the network is already known
next time, connect it and then open network under system preferences, you'll be able to see the adapter's progress in acquiring an IP address

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

What ipad, which model samsung? Are you attempting HDMI, VGA, or an RGB connection. Ipad 2 supports mirroring into an HDMI at an output of 1080. Ipad 1 is limited to only a few apps capable of the output, such as Youtube.
page64,65 of the latest ipad manual has more details.
Samsungs are good and should switch with the input - but sometimes you will have to select from the menu manually.
If in doubt, contact the customer support at samsung UK.
Also check - Settings/Video, that you have it enabled for Home Sharing. Apple Id which will be your .me.com email plus your apple ID password. I am not too sure about this as I cannot remember the exact order I set things up in - but page 89 of the manual references Home Sharing for sharing ipad/itunes content on a home pc/mac - so I would think it applies to content relayed to a tv or monitor too.

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

My App Store does not work when trying to update applications

My Apo store does not work when I try to update applications that need to be updated

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Dbx does not work when debugging g++ exes.

Hi,
We are just getting started building our application on redhat el5 with sunstudio 12.
We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
We now can compile and link fine but dbx does not work when it is fed the executable.
We get the error
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
and dbx freezes.
Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
Any ideas ?
The complete output of running dbx :
Output from dbx :
debug /ps_rels/Dev/linux_rhel5/exe/sx
Reading sx
Reading ld-linux.so.2
Reading libz.so.1
Reading libxerces-c.so.27
Reading libxalan-c.so.110
Reading libxalanMsg.so.110
Reading libsde.so
Reading libsg.so
Reading libpe.so
Reading libsqlite.so.0
Reading libsqlite3.so.0
Reading libgeos.so.2
Reading libpng12.so.0
Reading libX11.so.6
Reading libXm.so.4
Reading libXt.so.6
Reading libXi.so.6
Reading libXext.so.6
Reading libXrender.so.1
Reading libfreetype.so.6
Reading libexpat.so.0
Reading libfontconfig.so.1
Reading libcairo.so.2
Reading libglib-2.0.so.0
Reading libgmodule-2.0.so.0
Reading libgobject-2.0.so.0
Reading libgthread-2.0.so.0
Reading libpango-1.0.so.0
Reading libpangocairo-1.0.so.0
Reading libpangoft2-1.0.so.0
Reading libatk-1.0.so.0
Reading libgtk-x11-2.0.so.0
Reading libgdk-x11-2.0.so.0
Reading libgdk_pixbuf-2.0.so.0
Reading libtiff.so.3
Reading librt.so.1
Reading libwx_gtk2_xrc-2.8.so.0
Reading libwx_gtk2_qa-2.8.so.0
Reading libwx_gtk2_html-2.8.so.0
Reading libwx_gtk2_adv-2.8.so.0
Reading libwx_gtk2_core-2.8.so.0
Reading libwx_base_xml-2.8.so.0
Reading libwx_base_net-2.8.so.0
Reading libwx_base-2.8.so.0
Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
Reading libncurses.so.5
Reading libnsl.so.1
Reading libdl.so.2
Reading libACE.so.5.5.1
Reading libpthread.so.0
Reading libpam.so.0
Reading libm.so.6
Reading libc.so.6
Reading libstdc++.so.6
Reading libgcc_s.so.1
Reading libicuuc.so.34
Reading libicui18n.so.34
Reading libstdc++.so.5
Reading libXau.so.6
Reading libXdmcp.so.6
Reading libXmu.so.6
Reading libXp.so.6
Reading libXft.so.2
Reading libjpeg.so.62
Reading libSM.so.6
Reading libICE.so.6
Reading libexpat.so.1
Reading libXfixes.so.3
Reading libXrandr.so.2
Reading libXinerama.so.1
Reading libXcursor.so.1
Reading libXxf86vm.so.1
Reading libaudit.so.0
Reading libicudata.so.34
Reading libnss_files.so.2
Reading libnss_dns.so.2
Reading libresolv.so.2
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
Reading libnss_ldap.so.2
Reading libcom_err.so.2

Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

The dropdown list in the address bar does not work when clicked

In the address bar the dropdown list icon does not work when clicked. I have tried resetting everything in safemode and it still doesn't work. When I click on the icon it just highlights the entire address line.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Also check the setting in:<br />
[http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Thunderbolt to firewire adaptor does not work when daisy chaining firewire devices

Similar Messages

Maybe you are looking for