Thunderbolt to HDMI does not detect TV on Yosemite

I am having the same problem as a lot of people with Yosemite and and connecting to a TV/external monitor via thunderbolt to HDMI but have found a sort of a solution or at least a bit more info that might lead to someone having a eureka moment. I have a Mac Book Pro, my partner a Mac Book Air. I bought a thunderbolt to HDMI cable from eBay so my partner could plug her Air into the TV. When the cable arrived, it would not detect our LG TV from either computer. So a bit of playing around and this is what I found.
I plugged the cable from my MBP direct to the HDMI port on the TV and nothing, no signal detected.
I also tried from the MBP to the HDMI port on the amplifier of the surround sound system and again nothing.
However, if I plug the cable from my MBP directly to the TV HDMI and select that corresponding HDMI port on the TV initially still nothing. But if I then plug a normal hdmi-to-hdmi cable from my amplifier to the Mac Pro's HDMI port, suddenly the thunderbolt cable works and the Display Preferences sees the LGTV. I checked that the correct hdmi port was selected on the TV for the direct connection and I could even turn off my amplifier to make sure that I was not seeing the wrong signal and it still worked as long as the hdmi-to-hdmi was still connected at both ends. However, if I then unplug the HDMI cable from MBP or the amp, the thunderbolt port stops working as well and the TV displays "no signal detected".
It seems that there needs to be either a base signal or an earthing through the MacBook Pro's HDMI port for it to switch into an external monitor mode that will detect a thunderbolt to HDMI connection. This is sort of fine for my MBP as I had nothing working before but it seems a bit pointless having the HDMI cable plugged in as well as I might as well just use this in the first place. However, as my partner's Air only has a thunderbolt port and no HDMI port it still doesn't work with her MAC.
Hopefully someone will see this and have a brainwave.

A bit more playing around and I found that as above with the thunderbolt to HDMI plugged into the TV and a hdmi-to-hdmi plugged into the amp, with the amp turned off, I could get the thunderbolt to HDMI working. When I then went to the Display in System Preferences and the Arrangement pane, it was showing three displays, one for the MBP screen, one for the LG TV and one for the amp HDMI port (even though it was turned off). When I then unplugged the HDMI cable from the MBP the arrangement screen was no longer available as it only recognised the MBP screen. This was the same regardless of whether I was mirroring the displayed or had them as three separate displays.

Similar Messages

  • Mavericks does not detect my HD tv via thunderbolt

    I have a 15" Macbook Pro (mid 2012) and when I plug in my thunderbolt to hdmi adapter it does not detect it at all. Also I am running Mavericks on this Macbook. Please Help

    In system preferences/displays, click detect displays, also see the following:
    http://support.apple.com/kb/HT5219
    http://support.apple.com/kb/PH13801

  • Photo Downloader does not detect Thunderbolt connection. Help!

    I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
    When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
    How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
    Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

    It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
    Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
    I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
    It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
    You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
    restart photodownloader and try again.
    The other option is to use a USB 3.0 or Firewire (both also pretty fast).
    The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
    There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
    Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

  • Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

    On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
    The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
    NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
    Hence I think that it's very likely that this is a Windows-specific driver issue.
    Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • Macbook pro does not detect TV

    Hi,
    I have macbook pro Mid 2010. It used to work fine with Sony Bravia TV but today when I tried it was not detecting my TV.
    I do not see any "Arrangements" tab under System Preferences -> Displays. Here are my macbook pro details:
    Processor  2.53 GHz Intel Core i5
    Memory  4 GB 1067 MHz DDR3
    Graphics  Intel HD Graphics 288 MB
    Software  OS X 10.9.5 (13F34)
    I tried to reset PRAM but no help. Any suggestions on what may be happening?
    Thanks,
    Gaurav

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • Imac does not detect external vga display

    Please help with connecting external vga display to an imac 21.5'', late 2012, OS X 10.8.5 via Mini DisplayPort to VGA adapter.
    I have connected an external monitor (Fujitsu Siemens) to the thunderbolt port of the imac using a Mini DisplayPort to VGA adapter. The imac does not detect the external monitor. I have followed all instructions and suggestions I could find at Apple Support Communities without success.
    The monitor is in perfectly good working order as it has no problem connecting and performing flawlessly with a dell windows laptop. The imac, connected via the Mini DisplayPort to VGA adapter to the D-Sub connector of a Samsung smart TV, also worked perfectly.
    To add insult to injury, occasionally, when restarting the iMac with the external vga display connected and powered on, the iMac screen starts intermittently turning blue for a brief second or so and resuming back to normal. The frequency of 'blueing' is once in 2-3 seconds. This particular rather disturbing problem, luckily ceases when the external display is switched off.
    Any advice and help with resolving the above connection problems will be gratefully appreciated.
    Thank you
      ghogoh

    I am having the same issue.  Hope Apple can fix this soon!!!

  • Arch does not detect /dev/sdb

    HI everybody,
    Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
    I've searched around Google and the forums and I've doesn't found any helpfull tip.
    The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
    I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
    Here's some outputs that may be useful:
    sudo fdisk -l
    Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Identificador del disco: 0x8370a3d6
    Disposit. Inicio Comienzo Fin Bloques Id Sistema
    /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
    /dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
    /dev/sda3 1435379712 1953525167 259072728 5 Extendida
    /dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
    /dev/sda6 * 1437339705 1827960116 195310206 83 Linux
    /dev/sda7 1827960180 1953525167 62782494 83 Linux
    ls -lat /dev/sd*
    brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
    brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
    brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
    brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
    brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
    brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
    brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
    lspci -k
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    Subsystem: Intel Corporation Device 0036
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
    Kernel driver in use: pcieport
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: mei
    00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ata_generic
    00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: serial
    00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
    Subsystem: Intel Corporation Device 0037
    Kernel driver in use: e1000e
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: snd_hda_intel
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: lpc_ich
    00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: pata_acpi
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: i801_smbus
    00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: pata_acpi
    01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
    Subsystem: Device 196e:0898
    Kernel driver in use: nvidia
    01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
    Subsystem: Device 196e:0898
    Kernel driver in use: snd_hda_intel
    3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Intel Corporation Device 8086
    Thanks for the help!

    I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
    The configuration on the BIOS:
    ATA/IDE Mode -> Native
    Configure Storage as -> IDE
    It doesn't show more valuable information except for the location of any drive on any SATA port.
    dmesg output, it can be useful for someone:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
    [ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
    [ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
    [ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
    [ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000df61bf40 00040
    [ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
    [ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
    [ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
    [ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
    [ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
    [ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
    [ 0.000000] On node 0 totalpages: 2061655
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18176 pages used for memmap
    [ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
    [ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
    [ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
    [ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
    [ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
    [ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
    [ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
    [ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
    [ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
    [ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
    [ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
    [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
    [ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
    [ 0.000000] NR_IRQS:4352 nr_irqs:808 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 3324.877 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003590] Mount-cache hash table entries: 256
    [ 0.003783] Initializing cgroup subsys cpuacct
    [ 0.003786] Initializing cgroup subsys memory
    [ 0.003793] Initializing cgroup subsys devices
    [ 0.003794] Initializing cgroup subsys freezer
    [ 0.003796] Initializing cgroup subsys net_cls
    [ 0.003797] Initializing cgroup subsys blkio
    [ 0.003818] CPU: Physical Processor ID: 0
    [ 0.003819] CPU: Processor Core ID: 0
    [ 0.003824] mce: CPU supports 9 MCE banks
    [ 0.003833] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003840] process: using mwait in idle threads
    [ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003958] Freeing SMP alternatives: 16k freed
    [ 0.004816] ACPI: Core revision 20120913
    [ 0.007720] ftrace: allocating 18793 entries in 74 pages
    [ 0.015109] Switched APIC routing to physical flat.
    [ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
    [ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.154178] ... version: 3
    [ 0.154179] ... bit width: 48
    [ 0.154180] ... generic registers: 4
    [ 0.154181] ... value mask: 0000ffffffffffff
    [ 0.154182] ... max period: 000000007fffffff
    [ 0.154182] ... fixed-purpose events: 3
    [ 0.154183] ... event mask: 000000070000000f
    [ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.227213] Brought up 4 CPUs
    [ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
    [ 0.229378] devtmpfs: initialized
    [ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
    [ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
    [ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
    [ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
    [ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
    [ 0.231092] RTC time: 21:05:23, date: 02/03/13
    [ 0.231127] NET: Registered protocol family 16
    [ 0.231227] ACPI: bus type pci registered
    [ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.236542] PCI: Using configuration type 1 for base access
    [ 0.236958] bio: create slab <bio-0> at 0
    [ 0.237003] ACPI: Added _OSI(Module Device)
    [ 0.237005] ACPI: Added _OSI(Processor Device)
    [ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.237812] ACPI: EC: Look up EC in DSDT
    [ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.240820] ACPI: Dynamic OEM Table Load:
    [ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
    [ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.241020] ACPI: Dynamic OEM Table Load:
    [ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.241360] ACPI: Interpreter enabled
    [ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.241374] ACPI: Using IOAPIC for interrupt routing
    [ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.244856] ACPI: No dock devices found.
    [ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.245005] PCI host bridge to bus 0000:00
    [ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
    [ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
    [ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
    [ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
    [ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
    [ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
    [ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
    [ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
    [ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
    [ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
    [ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
    [ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
    [ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
    [ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
    [ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
    [ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
    [ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
    [ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
    [ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
    [ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
    [ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
    [ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
    [ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
    [ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
    [ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
    [ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
    [ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
    [ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
    [ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
    [ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
    [ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
    [ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
    [ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
    [ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
    [ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
    [ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
    [ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
    [ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
    [ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
    [ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
    [ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
    [ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
    [ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
    [ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
    [ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
    [ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
    [ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
    [ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
    [ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.250606] vgaarb: loaded
    [ 0.250607] vgaarb: bridge control possible 0000:01:00.0
    [ 0.250627] PCI: Using ACPI for IRQ routing
    [ 0.252814] PCI: Discovered peer bus 3f
    [ 0.252815] PCI: root bus 3f: using default resources
    [ 0.252815] PCI: Probing PCI hardware (bus 3f)
    [ 0.252831] PCI host bridge to bus 0000:3f
    [ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
    [ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
    [ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
    [ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
    [ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
    [ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
    [ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
    [ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
    [ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
    [ 0.253005] PCI: pci_cache_line_size set to 64 bytes
    [ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
    [ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
    [ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
    [ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
    [ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
    [ 0.253125] NetLabel: Initializing
    [ 0.253126] NetLabel: domain hash size = 128
    [ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.253137] NetLabel: unlabeled traffic allowed by default
    [ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.255164] Switching to clocksource hpet
    [ 0.258533] pnp: PnP ACPI init
    [ 0.258548] ACPI: bus type pnp registered
    [ 0.258610] pnp 00:00: [bus 00-ff]
    [ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.258618] pnp 00:00: [mem 0x00000000 window]
    [ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
    [ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
    [ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
    [ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
    [ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
    [ 0.259007] pnp 00:03: [irq 4]
    [ 0.259008] pnp 00:03: [dma 0 disabled]
    [ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.259277] pnp 00:04: [io 0x0378-0x037f]
    [ 0.259279] pnp 00:04: [io 0x0778-0x077f]
    [ 0.259283] pnp 00:04: [irq 5]
    [ 0.259284] pnp 00:04: [dma 3]
    [ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.259389] pnp 00:05: [dma 4]
    [ 0.259390] pnp 00:05: [io 0x0000-0x000f]
    [ 0.259391] pnp 00:05: [io 0x0081-0x0083]
    [ 0.259392] pnp 00:05: [io 0x0087]
    [ 0.259394] pnp 00:05: [io 0x0089-0x008b]
    [ 0.259395] pnp 00:05: [io 0x008f]
    [ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.259413] pnp 00:06: [io 0x0070-0x0071]
    [ 0.259418] pnp 00:06: [irq 8]
    [ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.259437] pnp 00:07: [io 0x0061]
    [ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.259459] pnp 00:08: [io 0x0010-0x001f]
    [ 0.259460] pnp 00:08: [io 0x0022-0x003f]
    [ 0.259462] pnp 00:08: [io 0x0044-0x005f]
    [ 0.259463] pnp 00:08: [io 0x0062-0x0063]
    [ 0.259464] pnp 00:08: [io 0x0065-0x006f]
    [ 0.259465] pnp 00:08: [io 0x0072-0x007f]
    [ 0.259466] pnp 00:08: [io 0x0080]
    [ 0.259467] pnp 00:08: [io 0x0084-0x0086]
    [ 0.259468] pnp 00:08: [io 0x0088]
    [ 0.259469] pnp 00:08: [io 0x008c-0x008e]
    [ 0.259471] pnp 00:08: [io 0x0090-0x009f]
    [ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.259513] pnp 00:09: [irq 13]
    [ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
    [ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
    [ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
    [ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
    [ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
    [ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
    [ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
    [ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
    [ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
    [ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.259892] pnp: PnP ACPI: found 12 devices
    [ 0.259893] ACPI: ACPI bus type pnp unregistered
    [ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
    [ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
    [ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
    [ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
    [ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
    [ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.266492] NET: Registered protocol family 2
    [ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.269063] TCP: reno registered
    [ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.269211] NET: Registered protocol family 1
    [ 0.315053] pci 0000:01:00.0: Boot video device
    [ 0.315082] PCI: CLS 64 bytes, default 64
    [ 0.315125] Unpacking initramfs...
    [ 0.353156] Freeing initrd memory: 2804k freed
    [ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
    [ 0.353859] audit: initializing netlink socket (disabled)
    [ 0.353875] type=2000 audit(1359925523.249:1): initialized
    [ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.364275] VFS: Disk quotas dquot_6.5.2
    [ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.364442] msgmni has been set to 15695
    [ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.364676] io scheduler noop registered
    [ 0.364678] io scheduler deadline registered
    [ 0.364713] io scheduler cfq registered (default)
    [ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.364910] vesafb: scrolling: redraw
    [ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
    [ 0.452482] Console: switching to colour frame buffer device 160x50
    [ 0.539642] fb0: VESA VGA frame buffer device
    [ 0.539651] intel_idle: MWAIT substates: 0x1120
    [ 0.539652] intel_idle: v0.4 model 0x25
    [ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.539700] GHES: HEST is not enabled!
    [ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
    [ 0.581313] Linux agpgart interface v0.103
    [ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.594726] mousedev: PS/2 mouse device common for all mice
    [ 0.594777] rtc_cmos 00:06: RTC can wake from S4
    [ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.595018] cpuidle: using governor ladder
    [ 0.595079] cpuidle: using governor menu
    [ 0.595112] drop_monitor: Initializing network drop monitor service
    [ 0.595172] TCP: cubic registered
    [ 0.595242] NET: Registered protocol family 10
    [ 0.595362] NET: Registered protocol family 17
    [ 0.595369] Key type dns_resolver registered
    [ 0.595570] PM: Hibernation image not present or could not be loaded.
    [ 0.595576] registered taskstats version 1
    [ 0.596120] Magic number: 1:939:94
    [ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
    [ 0.597300] Freeing unused kernel memory: 812k freed
    [ 0.597412] Write protecting the kernel read-only data: 8192k
    [ 0.599884] Freeing unused kernel memory: 1248k freed
    [ 0.601056] Freeing unused kernel memory: 476k freed
    [ 0.606451] systemd-udevd[57]: starting version 197
    [ 0.624469] SCSI subsystem initialized
    [ 0.625159] ACPI: bus type usb registered
    [ 0.625179] usbcore: registered new interface driver usbfs
    [ 0.625187] usbcore: registered new interface driver hub
    [ 0.625823] ACPI: bus type scsi registered
    [ 0.625865] usbcore: registered new device driver usb
    [ 0.625875] libata version 3.00 loaded.
    [ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
    [ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
    [ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.627806] scsi0 : pata_acpi
    [ 0.628229] scsi1 : pata_acpi
    [ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
    [ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
    [ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
    [ 0.633159] scsi2 : pata_acpi
    [ 0.633673] scsi3 : pata_acpi
    [ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
    [ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
    [ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
    [ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
    [ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.647467] hub 1-0:1.0: USB hub found
    [ 0.647471] hub 1-0:1.0: 2 ports detected
    [ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
    [ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
    [ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.660928] hub 2-0:1.0: USB hub found
    [ 0.660932] hub 2-0:1.0: 2 ports detected
    [ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
    [ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
    [ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.803079] ata1.01: no PIO support
    [ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.076944] hub 1-1:1.0: USB hub found
    [ 1.077141] hub 1-1:1.0: 6 ports detected
    [ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.306076] hub 2-1:1.0: USB hub found
    [ 1.306284] hub 2-1:1.0: 8 ports detected
    [ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
    [ 1.351799] Switching to clocksource tsc
    [ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
    [ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
    [ 5.935629] ata1.01: no PIO support
    [ 5.935631] ata1.01: disabled
    [ 5.951315] ata1.00: configured for UDMA/100
    [ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
    [ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
    [ 6.120503] ata2.01: no PIO support
    [ 11.257635] ata2.01: no PIO support
    [ 11.257639] ata2.01: disabled
    [ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
    [ 11.422293] scsi4 : ata_generic
    [ 11.422400] scsi5 : ata_generic
    [ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
    [ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
    [ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
    [ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 11.775078] usbcore: registered new interface driver usbhid
    [ 11.775081] usbhid: USB HID core driver
    [ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
    [ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
    [ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
    [ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
    [ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
    [ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
    [ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
    [ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
    [ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 13.159230] systemd[1]: Starting Remote File Systems.
    [ 13.159238] systemd[1]: Reached target Remote File Systems.
    [ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
    [ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 13.159298] systemd[1]: Starting Encrypted Volumes.
    [ 13.159306] systemd[1]: Reached target Encrypted Volumes.
    [ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 13.159472] systemd[1]: Starting udev Kernel Socket.
    [ 13.159488] systemd[1]: Listening on udev Kernel Socket.
    [ 13.159519] systemd[1]: Starting udev Control Socket.
    [ 13.159537] systemd[1]: Listening on udev Control Socket.
    [ 13.159543] systemd[1]: Starting Swap.
    [ 13.159550] systemd[1]: Reached target Swap.
    [ 13.159556] systemd[1]: Starting Journal Socket.
    [ 13.159589] systemd[1]: Listening on Journal Socket.
    [ 13.159600] systemd[1]: Started File System Check on Root Device.
    [ 13.159605] systemd[1]: Mounting Temporary Directory...
    [ 13.191259] systemd[1]: Mounting Huge Pages File System...
    [ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
    [ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
    [ 13.231452] systemd[1]: Starting Apply Kernel Variables...
    [ 13.240935] systemd[1]: Starting Setup Virtual Console...
    [ 13.252572] systemd[1]: Started Load Kernel Modules.
    [ 13.252592] systemd[1]: Mounted FUSE Control File System.
    [ 13.252605] systemd[1]: Mounting Debug File System...
    [ 13.254667] systemd[1]: Mounting Configuration File System...
    [ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
    [ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
    [ 13.305183] systemd[1]: Starting Journal Service...
    [ 13.307733] systemd[1]: Started Journal Service.
    [ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
    [ 13.750053] systemd-udevd[127]: starting version 197
    [ 13.921301] systemd-journald[128]: Received SIGUSR1
    [ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
    [ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
    [ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
    [ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
    [ 5.951986] ACPI: Invalid Power Resource to register!
    [ 14.953337] parport0: PC-style at 0x378
    [ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    [ 15.027758] ppdev: user-space parallel port driver
    [ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
    [ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
    [ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
    [ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
    [ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 15.124825] ACPI: Requesting acpi_cpufreq
    [ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 15.127327] ACPI: Power Button [PWRB]
    [ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 15.127425] ACPI: Power Button [PWRF]
    [ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 15.140068] hda_intel: Disabling MSI
    [ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
    [ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
    [ 15.310990] Disabling lock debugging due to kernel taint
    [ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
    [ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
    [ 15.335992] mei 0000:00:16.0: setting latency timer to 64
    [ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
    [ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
    [ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
    [ 15.384478] iTCO_vendor_support: vendor-support=0
    [ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
    [ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
    [ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
    [ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
    [ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
    [ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
    [ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    [ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
    [ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
    [ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
    [ 34.993208] NVRM: corruption and stability problems, and is not supported.
    [ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
    [ 98.242223] fuse init (API version 7.20)
    Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user.

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • Smartband and Lifelog does not detect jogging

    Hello,
    Smartband and Lifelog does not detect jogging (does not distinguish walking and jogging/running).
    For example - walking with speed 5.7Km/h and treadmill running with speed 9-10 km/h.
    Smartband worn on left hand.

    Hi, 
    As I understand, lifelog log your exercise as running if the pace is 2.5 steps/ second or above. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • How can I use Bluetooth it does not detect others iPhone

    How can I use Bluetooth it does not detect others iPhone

    The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • Itunes 11.1.4.62 does not detect existing iphone or ipad

    Just downloaded the above, and now on plugging in either my existing iphone or my Ipad via wired USB connection, itunes does not detect the device.  Running windows 8.1, Tried updated iphone software to match as well, still no detection.  Am I missing something on the new version in set up or something, or is it an uninstall and reload?
    Thanks

    Have tried different cables as well

  • Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

    Hi,
    I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
    Rebooted the computer
    Rebooted the iPhone
    plugged and unplugged the USB cable multiple times and to various USB ports
    Uninstalled and installed the i-Tunes
    Signed out the iTunes and signed in again
    my USB cable and ports are all ok
    my ios version on iPhone is : 7.4.4
    my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
    I appreciate your help.

    I find this on another post and tried it.  It WORKED.  I had to modify to fit my situation but give it a try.  Good luck.
    Go to Windows 8.1 Control Panel.
    Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
    Right-click, then select properties on the menu list.
    Under the "Driver" tab menu, confirm the update driver button is not greyed out.  If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
    Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
    Select "Update Driver".
    Select and click "Browse my computer for driver software".
    For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. 
    Click Next, and let the driver re-install.
    iTunes  11.1.4.62 should open automatically if your iphone is connected already.

  • HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

    i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes  but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • When I plug my ipod into my computer, itunes does not detect it.?

    When i plug my ipod nano into my computer,itunes does not detect it ?? What i am supposed to do ??
    Thank you

    I think you have to remove ITunes and install the latest version's one; then it will work fine.
    Bye!

Maybe you are looking for

  • High pitch squeal related to Firewire audio device after 10.6.2 audio patch

    So the recent Mac Pro audio update 1.0 (applied on 10.6.2) has reduced my CPU temperature with audio playback (Presonus Firebox Firewire audio interface) and that is great. Also haven't had any machine crashes (grey screens) recently which is also gr

  • IBook repaired, songs bought through iTunes will not transfer back to iPod

    i found the way to get my songs from my iPod to my computer, but now all of the songs i bought through iTunes will not go back to my iPod. error message is "some of the songs, including "so-and-so" (actually it's Alice Cooper's Feed my Frankenstein :

  • Ipod not charging

    Hi vrox41 here i have been experiencing a problem with my ipod touch when i connect it on my computer it is not recognized by itunes or windows and it doesnt charge

  • Function Module to get Material Document Number

    Hi All, I want to get the Material Document Number based on the Material, batch ,movement type and plant. Is there any function module to achieve this, without going to MSEG table.

  • How to make changes in HR-Forms using hr Form Editor

    Hi,       I am new to hr-abap..And I am working on HR form editor..and I wanted to generate a pay-slip using the hr forms..I had copied the standard form..and I am making the changes into that.. I want to add my own customization into it..like I want