Thunderbolt w firewire converter to older MacBookPro

I just purchased a Thunderbold Display and everyone told me it would work with my 2009 mac book pro but after plugging it into to my firewire converter it is still not responsive! Does anyone have a advice! I just want them to sync up!

Hello jordiemosley22,
If your MacBook Pro does not have a Thunderbolt port, then the display will not power on. Take a look at the article below for more information about the system requirements as well as any other questions you may have about your new Thunderbolt Display.
Thunderbolt ports and displays: Frequently asked questions (FAQ)
http://support.apple.com/en-us/ht5219
Regards,
-Norm G.

Similar Messages

Is there any kind of adapter/converter that converts an older Firewire 400 to Thunderbolt?

Is there any kind of adapter/converter that converts an older Firewire 400 to Thunderbolt?

Is this to plug in an older FW 400 device into a Thunderbolt port on a Mac?
Or to plug in a Thunderbolt device into a FW 400 port on a Mac?
The first can be done but not the second.

Can I import video from a Firewire camcorder using the Thunderbolt to Firewire Adapter?

I have an older camcorder that has a firewire interface. My new iMac does not have any firewire ports. Can I import video from the camcorder using a Thunderbolt to Firewire Adapter or is the Thunderbold adapter only used for hard drives and displays?

Rather than an adapter, I would suggest you purchase a 4 pin to 9 pin Firewire 800 cable to run from the camera to the Thunderbolt to Firewire adapter. Those FW 400 to 800 adapters frequently do not work so well for importing video in my experience.
The Firewire cables are pretty inexpensive if you get them online. For example try Monoprice.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

Has anyone been able to use an Apple Thunderbolt to FireWire to daisy chain a dozen or more FireWire drives?

Ever since I realized that I was not able to connect my FireWire daisy chain to my brand new Retina MBP there has been problems. Four months down the road, I am still unable to use my FireWire drives and have experienced terrible problems whenever I connect my FireWire daisy chain to this new Mac.
I have bought two of these adaptors from Apple now and both do the same thing. The daisy chain has been working perfectly for years with my older MBP and still does! There are no problems until I connect to the new Mac.
I have 15 various hard drives in NewerTech and DatOptics enclosures for over 22 TB. When connected to the new Mac, I would have multiple apps just hang, sometimes just Apple apps, sometimes 3rd party. I will not be able to force quit them and they will keep relauching as you can watch them in the Force Quit window. The Finder will hang and there is no relaunching it. I am having to do a force shutdown twice an hour which leaves no time for work!
After four months of this, now I am being told that Apple will buy back my Mac at full price. But I have basically lost the good part of four month’s worth of work because of constantly fighting the new Mac. This is cost me all my savings and I am about to lose a client. It certainly seems that releasing Thunderbolt1 was a huge, huge mistake.
Does anyone know of any large Fire Wire daisy chain working with Thunderbolt?
TIA,
R

Yes, my first post is all about how darn iffy the adaptors are and I have two of them to return now.
I question your answer because I am betting that four drives that are in one enclosure NOT all RAIDed together as one drive, but as four separate drives that those four drive will count as four devices. The daisy chain that I had going had eight drives in TWO quad boxes, four drives in TWO dual drives and another drive in a single enclosure. A total of five “devices” if you will, but also a total of 13 drives that were usually in this daisy chain.
Both of the Apple branded Thunderbolt to FireWire adaptors chocked BIG TIME on this and it works no problem on my older MBP. You basically can not use a new Mac when you are connected to a daisy chain like this!
Just checked the Apple website and indeed, I can get a new MBP with FireWire 800, just not with the Retina display! I wish that I would have known this five months ago before this all started!

Using thunderbolt to firewire adapter for target disc mode

I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the data to the new Mac Mini? I've used TDM with two Firewire machines, but not with a newer Thunderbolt to Firewire Machine using an adapter.
Thanks for any input.
--SL

Hi Salnews,
I've done quite a bit of research on this, as this is what I plan to do (only from a MBP on 10.9, but I don't think your situation would be any different) and everything I've read says the answer is yes.
EDIT: I see you're on 10.6.7. You should update to 10.6.8 first.

Can I use the new Apple Thunderbolt to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

Can I use the new Apple Thunderbolt to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

Will the Thunderbolt to FireWire adapter allow an external FW HDD to boot a TB Mac?

Hi all,
Will the Apple Thunderbolt to FireWire 800 adapter allow an external FW HDD to boot a TB Mac (the 2014 Mac mini in this case, but I suspect the same will be true with any TB Mac)? I have all FW800 external HDDs, want to be able to boot from them like I can with a FW 800 equipped Mac, and don't want to buy TB external HDDs.
Thanks!

I just placed my older MacBook in Target Disk mode and then booted my 2103 Mac Pro with Option key and the MacBook's HD was available as a bootable drive. I will not boot since the McBook is maxed out at Lion

Thunderbolt to HDMI converter

I recently purchased a new TV and want to be able to hook my MacBookPro up to it to stream movies & such.
I purchased a Thunderbolt-to-HDMI converter & am able to play the content from my laptop to the TV, but the audio still comes out of the laptop speakers rather than the TV speakers. So I purched a headphone-to-RCA cable but when I plug that in to the laptop no sound comes out from anywhere. Any suggestions?
Thanks!!

Hi there,
I would recommend double checking the system Sound Output in system preferences. Take a look at the article below for more information.
OS X Mountain Lion: Change your computer’s sound output device
http://support.apple.com/kb/PH11235
-Griff W.

HT201338 Can I connect a firewire 400 to firewire 800 adapter and then a firewire 800 to Thunderbolt adapter(standard Thunderbolt to firewire adapter) together to digitize video from a miniDV video camcorder?

I have a 10 year Canon MiniDV camcorder that I used to connect via firewire to digitize the data. Now my IMac only has a Thunderbolt connector and my camcorder uses the older firewire 400 standard. I would like to digitize the video into my IMac. How can I do this?

I did a little looking around and found a Thunderbolt to Firewire 800 adapter, and then a Firewire 400 to 800 adapter, but no Thunderbolt to Firewire 400. Amazon and Apple stores had the Thunderbolt to Firewire 800 cable and Amazon had the Firewire 400 to 800 adapater.
Wherever you get the cables, ask them if it will work OK with what you want to try and do - if they don't know make sure you can return if there is a problem. I think it will because the Thunderbolt side is so much faster than what the camera can pump out to it. If it were the other way (Thunderbolt device to a Firewire computer I would expect that to fail since the Firewire could never keep up with the data rate of the incoming Thunderbolt device).
Maybe if you have a local Mac user group or a friend with an older mac with a firewire 400 port you could do it this way too?
Good luck

HT5299 Can 2 daisy-chained firewire-800 drives be connected to 1 Thunderbolt-to-Firewire adapter?

Can 2 daisy-chained firewire-800 drives be connected to 1 Thunderbolt-to-Firewire adapter?

Nightwatch (NL) wrote:
Thanks Steve!
One more question: Stayed throughput speeds more or less the same as original Firewire (since all my movies are on external disks) or has it become significantly slower?
I haven't done a careful side by side quantitative comparison of what I had on the older Macbook Pro (which had three Firewire800 disks chained together via FW800) versus the new Macbook Pro (which has thunderbolt into which I have connected three FW800 drives daisy chained via the adaptor), mainly because my employer supplied me with these computers and required I turn in the old one when they replenished it with the new one. However, I can say this -- one of the FW800 externals is used for Time Machine, another for making entire disk clones, and the third is for misc storage. I have seen Time Machine start up during a disk clone (with SuperDuper) and there seems to be no impact. The disk cloning is generally pretty intensive on disk and cpu resources, but thunderbolt seems to have a much bigger capacity for throughput than firewire and hence can apparently accommodate multiple streams of FW800 data going back and forth with no apparent impact on each other. The main limit seems to be the FW800 speed itself, not thunderbolt. I see ~ 60 MB/s or more which is as much as I have ever seen on FW800. Ultimately, the ideal setup will be thunderbolt drives daisy chained together, I would expect hundreds of MB/s, but I don't see many of these thunderbolt drives on the market yet. Even better would be solid state drives ...

Anyone heard word on a Thunderbolt to Firewire adapter yet?

Anyony heard word on the release of a Thunderbolt to FireWire adapter yet? (Aside from the Sonnet Echo for $250.00 including card.)
Also, I was reading online and I found an older article that read "The Thunderbolt port is identical to a Mini DisplayPort, so any Mini DisplayPort cable or adapter will work." Is this true, or is this old news?

Just picked up an apple thunderbolt to FW 800 adapter that I am going to return.
I was hoping it would work on my setup.
2.66 Ghz core i7 MBP, 10.7.5,
JVC SR-VS30U deck that uses a 4 pin firewire cable.
a WD 4TB mybook and an OWC on the go pro external drive.
Both are FW 800 and neither come up when I plug them in and no thunderbird hardware was found when I do a system report.
I was hoping that I could capture from my deck (4-pin FW) to my chained FW 800 drives. Like I can if there is a 6 pin FW device in chain.
I thought seperating the HD's with thunderbolt could do it, but it doesn't see the drive.
Oh well...

Thunderbolt and FireWire 800 / 400

Hey gang!
I have a 2011 MacMini and a theoretical question. I have a FW800 external drive connected to it for my TimeMachine backup. I also have a FW400 audio capture box I use from time to time.
I used to chain the drive and audio device, but that slows the FW chain to 400 speeds instead of 800. If I connect the FW800 drive directly to the Mac mini, and the FW400 audio capture box to the Mac min via the Thunderbolt-to-FW800 adaptor(via a small 800-to-400 converter plug), will that slow the whole bus down to 400, or will they work at independent speeds?
I assume the Thunderbolt and FW chips are indepent and that the would NOT slow down speeds, but I would like to hear a more technical answer to my question.
Thank you in advance.

Apple sells a Thunderbolt to Firewire 800 cable here. Connect directly to your external drive with this cable, and the FW400 audio capture box (with adapter) to the Mini's FW800 port.

My thunderbolt to firewire adapter doesn't fit the firewire???

I bought the apple store "Thunderbolt to FireWire Adapter" today. I'm trying to put my old iMac in Target Mode and move old files. The firewire cord doesn't fit into it??? I'm sitting here feeling pretty stupid and stumped?

Your firewire cord is the wrong size. Apple's cord is 800 port. What size is your cord?

My connection via hdmi to my TV is no longer working. Even if I use a thunderbolt to hdmi converter

Hi, the day before yesterday I turned on my tv which was connected via HDMI out on the mac mini to HDMI in on my TV. Everything was working fine, however I have been trying to set up dual monitoring on another monitor using an HDMI to VGA adapter to my second monitor but nothing was working. I was about to watch a film from the mac to the TV wen I thought it might be the resolution on the hdmi out why it wasn't working on the monitor but was on the TV so I changed the settings and the hdmi to the TV cut out. My main monitor is connected by thunderbolt to VGA adapter and works fine. I can change all the settings for screen resolution on the main monitor and have tried every setting on it then unplugging and plugging in the hdmi cable from the mac to the TV. I get the blue flash on the screen so I know it is being detected but here is where it gets weird.
I figured I would try the thunderbolt to HDMI converter I originally bought for my iMac and again the blue screen flashes up but there is no blue flash or any sort of detection on the TV.
The whole time there is nothing showing up on the screen, even when I unplug my main display from thunderbolt to VGA (the main monitor) and connect the thunderbolt to hdmi adapter and plug in the hdmi to the TV.
I know it's not the hdmi cable as I have tested it on my youview box to my tv and it worked fine.
I also know its not the tv as iv connected my friends windows laptop to the TV using the same cable so it must be the settings on the mac.
I have tried doing a time machine restore to the day I bought it and have had no problems so far until I changed the settings. Why oh why did I mess about with it!!
If anyone can help please let me know ASAP.
It doesn't show up the HDMI output in audio anymore either, however like I say it flashes blue wen I connect the hdmi but seems to have no idea that the HDMI is connected in the display settings! It's so frustrating. I'm going to call the mac support today but if anyone on here hash as any similar problems n fixed them please let me know.
Btw I'm running Mac OS X 10.8.4. I know I can connect via a long VGA cable but that's not really the point. I, at least would like to get my mirrored desktop on my tv back from HDMI!

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Apple no longer making thunderbolt to firewire adapter!

I just visited an apple store today to be told that Apple are no longer making the thunderbolt to firewire adapter which was meant to be released this month (July). Calling Apple customer support also confirmed this. It is also no longer mentioned as a option, when ordering a new MBP retina on the Apple online store.
As I've just purchased a new MBP retina for portable video editing, the prospect of not being able to plug in all my legacy firewire drives to the MBP is very frustrating, and I'm sure many people are in the same situation. Trying to daisy chain via a USB 3 LaCie drive to firewire did not work when tested and it's likely that any other solutions via hubs etc, will probably require mains power. For ediitng on the road via bus powered drives, firewire is suddenly not an option at present.
Many of us have gone through these transitions before as Apple pushes new and better technology forward at the expence of backwards compatibility. Thunderbolt will be great, but curently it is expensive and not widely adopted, where as firewire drives are considerbaly cheaper than thunderbolt drives and many of us have a large number of these drives being used on a daily basis.
I'm sure other manufactures will be scrabling to bring a thunderbolt to firewire adapter to the market, however the fact that Apple has stopped making it before it was even released is alarming.

Styphin wrote:
And yet, FireWire became an industry standard. Your argument is invalid.
Key word highlighted (in comparison to "has become"). As Shootist points out, it is harder and harder to find any kind of FW device out there. Hence my soon to be orphaned 11 external HDDs, 2 of which only have FW and probably be unusable when I have to replace my current Mac. The rest fortunately have USB2 too and will have to function in a slow speed crippled mode when the time comes.
Even Apple is hedging its bets, else why add two USB3 ports and the HDMI in addition to the purportedly wonderful TB?

Thunderbolt w firewire converter to older MacBookPro

Similar Messages

Maybe you are looking for