Thunderport to vga adapter worked and now does not

Just bought a new external monitor. Also purchased thunderbolt(mdp) to vga adapter.
It worked the first time I hooked it up. was able to mirror and extended with no problems.
Then I powered everything down and unhooked to test a 2nd monitor.
Have not been able to get it to work again since.
Just tried to reset PRAM and still not working.
ideas?

N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

Similar Messages

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless Confused that it did work and now does not?

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

Wifi was working, and now does not discover any networks

I had wifi working, and now it does recognize any of the 6 networks that everything else discovers, any sugestions?
I read all related posts, did the software update to latest version, restarted several times, and did wifi reset. Actually my statmenet above is not entirely true. It does discover the network and connects when I place the device on top of a router, but moving to 50cm away from it and the connection disconnects and there are no networks discovered. I have tried it with 2 different routers, both of them are working well with my blackberry and laptop - and this was also working with the ipad before.

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
If this does not work, then restore the iPad to its factory settings and start again.

Upgrade to media source 5 and now does not recognize my Zen Touch player!?

JUpgrade to media source 5 and now does not recognize my Zen Touch player!
st off, I was having issues with mp3's transferring to my zen touch, it would say file cannot transfer, invalid format or something of the like.. The creative audio converter would not allow the file to be converted as it said the source was not availble, all odd as the files worked fine on my computer and were mp3 format. I did get them to transfer after downloading another 3rd party converter, I wanted to get past using another program though so I updated to media source 5, along with firmware updates to most recent for the zen touch.
Once I had updated it would not recognize my player, I opened version 3.xxx whatever and it did recognize. Thinking maybe it has an issue with both being installed I unistalled the old version. Same problem, still does not see my player. I upated the driver for the player as well, and my computer now could see the zen touch instead of unknown usb device, media source 5 no go still at this point. I opened windows media 0 and it saw the player and I could transfer files, but the lay out and editing cababilities are limited.
Basically I want to know what to do get this thing detected so I can use media source 5 to organize my files. Someone please help me.

N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

Purchased Acrobat XI Pro - was able to edit text and add text and now does not allow me to do anything -

was able to edit text and add text and now does not allow me to do anything - Except purchase the software again.Can't find an answer to this anywhere.

Use Adobe Acrobat, not Adobe Reader.

HT204368 bluetooth stopped working and now will not pair with any of my devices ?

bluetooth stoped working and now will not pair with any of my devices? any suggestions?

Hello, oscar302.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful with this issue.
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H.

I have made many apple id and now does not allow me to go back in and fix it to another nor with self poth Ben had. Can you help me too please

I have made many apple id and now does not allow me to go again and build another storming nor with what I had. Can you help metoo please

Gonda...
Not just a language issue...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

HT3302 My iPod Touch fell into the washer and now does not start. What can I do to fix it?

My iPod Touch fell into the washer and now does not start. What can I do to fix it?

If it is totally dry:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install.

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install. Is in install mode screen and Extension Manager does not install. Help me!

What you said confused me. You uninstalled it. You does not want to install. Why do you install it again? Could you explain it clearly?

Upgraded to iOS 5 on my iphone 3gs now phone service doesn't work and battery does not hold charge. Can someone help me?

I upgraded to iOS 5 on my iphone 3gs now phone service (AT&T) constanly goes in and out and battery does not hold charge. Can someone help me?

It appears to be a bug in iOS5. I have the same problem on the 3Gs and my new 4S.
I eagerly await a patch......

HT5569 I have a ipod touch and it has updated the device and is asking me to join a net work and it does not show any net works and ony has other but i dont know any networks so what do \i do

I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
cheers

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPad 2 Wireless / 3G was fully charged. A message popped up to update software to latest version. I clicked on "update" and the battery drained immediately and now does not charge. Has anyone else encountered this?

My iPad 2 Wireless/3G was fully charged. A message appeared saying to update the software. I clicked on "update" The battery immediately discharged and now will not charge again. Does anyone know how to fix this?

Plug it into the wall charger.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

COMMIT WORK AND WAIT does not work

Hello,
I know this question has been asked many times in various forums. But the fact remains that there is no definitive solution found for this problem which does not involve WAIT UP TO n SECONDS or SELECT until the DB commit has been completed.
We have an IDoc based inbound interface for creating Project Defintion and WBS Elements. Here is how the code looks like in the processing function module:
* Create Project Defintion
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = lwa_proj_bapi
TABLES
    e_message_table         = lt_messages.
* If no errors
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = 'X'.
* Other code
* Create WBS Element (BAPI could not be used because not all fields are allowed to be updated)
CALL TRANSACTION 'CJ11'
Now while creating the WBS Element, transaction CJ11 returns an error that 'Project does not exist'. This is not correct because the same Project was successfully created in the previous step.
It is clear that the problem is because of the delay in database commits.
This happens only with few IDoc's and not all of them. And of course, the problem does not occur if I induce WAIT UP TO n SECONDS after BAPI_TRANSACTION_COMMIT. But this is not the best practice.
The question is why BAPI_TRANSACTION_COMMIT does not wait even though we are forcing it to?
Thanks in advance
Sagar Acharya

Suhas wrote:
But i am baffled that although the COMMIT has happened earlier why is the data not updated in the DB ?
Well, it's just a [COMMIT WORK|http://help.sap.com/abapdocu_70/en/ABAPCOMMIT.htm] and not a [COMMIT WORK AND WAIT|http://help.sap.com/abapdocu_70/en/ABAPCOMMIT.htm#@@AND%20WAIT@@COMMIT%20WORK@@]. Let me quote the ABAP help:
If you do not specify the addition AND WAIT, the program does not wait until the update work process has executed it (asynchronous updating), but instead is resumed immediately after COMMIT WORK. However, if the addition AND WAIT is specified, program processing after COMMIT WORK will not continue until the update work process has executed the high-priority update function modules (synchronous updating).
@Sagar Acharya: Well, I thought you were looking for an explanation why sometimes the project isn't created (and you only had posted coding that showed details for step 1) - I'm trying hard, but my mind reading skills are rather limited yet...
So let's think about step 2 and 3: I assume that you made sure that your coding always references the correct WBS element. Again the commit (without wait) is done already via CJ11 (e.g. check form BUCHEN in SAPLCJWB). I'd expect though that the synchronous update mode should make this work. Since it doesn't, I'd try local update mode, which is what I'd choose in your case anyhow.
Apart from that my mind is pretty blank, except for the usual silly things to check. E.g. are you sure you're coding is correct, you are handling all return messages and log them for inspection later (e.g. application log), you are certain that the WBS was actually created by the same IDoc that throws the fit (and IDoc was not reprocessed), etc.
So maybe somebody else has better ideas...

Browser Install Fails, it says "Firefox has stopped working" and it does not install. I cant use your browser.

I had few issues with Mozzilla browser so i uninstalled it completely and tried to re install it again. But when i try to reinstall it , it does not install fully , it breaks half way and says, Firefox has stopped working. I cant install Firefox now. Can you help.

Try this instead:
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
*Start the installation with a double-click on the desktop icon
Make sure that your security software isn't causing problems.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

My iMac 2006 had Lion and now does not run any Lion at all.

Hi
I have tried to install my Lion from an external drive. This drive has basic Lion on it and runs great with my iMac.
However installing the Lion on my iMac fails constantly. I have reviewed the installation protocol and can not find a clue. It seems as if the drive was wrong but the disc checker does not find a clue when it is empty. I did several partition processes and deleted it with various methods. However a volume of 310 MB was always left, although hidden to me.
When I checked the protocol some errors occur. I can not judge, which critical at all. However this ReportCrash could be a hint.
Oct 11 04:58:02 localhost ReportCrash[2392]: Process:         update_automator_cache [2391]
Oct 11 04:58:02 localhost ReportCrash[2392]: Path:            /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache
Oct 11 04:58:02 localhost ReportCrash[2392]: Identifier:      update_automator_cache
Oct 11 04:58:02 localhost ReportCrash[2392]: Version:         ??? (???)
Oct 11 04:58:02 localhost ReportCrash[2392]: Code Type:       X86-64 (Native)
Oct 11 04:58:02 localhost ReportCrash[2392]: Parent Process: sh [2390]
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Date/Time:       2013-10-11 04:57:58.123 -0700
Oct 11 04:58:02 localhost ReportCrash[2392]: OS Version:      Mac OS X 10.7.5 (11G63)
Oct 11 04:58:02 localhost ReportCrash[2392]: Report Version: 9
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: VM Regions Near 0:
Oct 11 04:58:02 localhost ReportCrash[2392]: -->
Oct 11 04:58:02 localhost ReportCrash[2392]:     __TEXT                 000000010e546000-000000010e549000 [   12K] r-x/rwx SM=COW /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache [/System/Library/Frameworks/Automator.framework/Versions/A/Support/update_autom ator_cache]
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Application Specific Information:
Oct 11 04:58:02 localhost ReportCrash[2392]: objc[2391]: garbage collection is ON
Oct 11 04:58:02 localhost ReportCrash[2392]:
Oct 11 04:58:02 localhost ReportCrash[2392]: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
The installation finally stopped progressing, so that canceld the programm by cmd+Q.
I hope to add the complete protocol for your review.
Regards
Tom

Hi
The problem was a hard drive with a bad storage area.
I replaced the hard drive with an external drive and boot the OS X from there.
Now all is good.
That was solved a year ago.
Thanks for being patient.
Tom

Thunderport to vga adapter worked and now does not

Similar Messages

Maybe you are looking for