THX Console doesn't exi

I have scoured the forums up and down, and I've seen similar problems, but none have been resolved satisfactorily.
Simply put, I have an X-Fi and no THX Console. None. Nowhere.
As a matter of fact, the only thing that got installed (along with the drivers) is the Audio Console. I have the original install CD, and I can see the THX Console on the CD, but can't install it directly. Anyone have the same problem? Know how to fix it's? I may end up just downloading a new installation disc ISO and hoping that gives me the option to install all the other apps that are on the CD.

RyanJW wrote:
None of the Vista drivers come with anything more than the basic audio console (the thing that looks like a generic Windows application) as far as I'm aware. What I had to do to get the THX console and everything else (the EQ adjuster was most important for me) by downloading the youpax drivers off BitTorrent.
The youpax drivers as far as I'm aware basically the apps modified a bit so they work on Vista. I don't believe you can normally download it anywhere so a crash course in BitTorrent may be necessary (or so pro Googling).
First of all you are assuming they are referring to Vista and not Xp. Also look at the date when this thread was started, March , 2006; doubtful the OP was talking about Vista (or ever came back here either). And as far as the apps for Vista did you miss this,?http://us.creative.com/products/prod...7&product=6743?which you can also find on most torrent sites. Not only that but you get ALL the apps, and not just the ones that youP managed to modify.

Similar Messages

Creative THX Console sorfware for window

Hello all.
I am running a Soundblaster Audigy 2 ZS and using Windows XP Pro 64. Can anybody tell me if I can get a version of the "Creative THX Console sorfware" for my OS?
I Found the software really handy when I was running windows XP 32bit. could I use the software that came with my soundcard driver CD with my 64bit drivers.
Thanks for reading my silly noobi question
Oddsodz

I don't know about the X-Fi, but Creative tech support told me that with the Audigy 2 ZS I should?completely uninstall all the software from the CD since it would not work correctly with the newest drivers. If the same situation applies to X-Fi cards, you might find that the THX console doesn't work correctly with the new drivers anyway.
Creative told me that the new drivers were designed to put everything in the new "Creative Audio Console," which is a regular "windows like" panel that contains adjustments like EAX, effects, etc. They would not give me direct answers to some of my questions, but the idea appeared to be that they were moving away from the proprietary "Creative" versions of the adjustments, like the Creative Mixer and so forth.
Larry

Problem THX Console Audigy 2

I am having following problem using the latest official drivers of the Audigy 2 ZS:? In THX Console changing the dB number of each individual speaker has no effect. Also I noticed that in Audio Console, CMSS3D options moving the fader slider also has no effect. Changing the CMSS mode only works for switching to CMSS2 mode, but the sliders still have no effect. Also selecting CMSS off, sound keeps coming out of all 5 speakers (5. configuration). I have tried resinstalling the drivers and software of my Sound Blaster but it has no effect.

Yes, the settings are saved. Only if I enter the number by keyboard they are not, but I think that is a known issue. The problem is more global than the THX Console itself, because the change of settings through the Audio Console or even EAX Console is ineffecti've. It defaults to CMSS upmixing and although I can change the option to Stereo Surround it doesn't make a difference. It is very strange, because before I reinstall Windows all was working fine. Ohh yes... And I tried yesterday to install the original drivers and during the install Windows gave me an error about "NTWrite..." something. There was only an OK option and I clicked it. The drivers did install, despite the warning?and everything appears to be working apart from the fader,?CMSS and THX options., as previous.

THX Console wont save Subwoofer dB after clos

Hello, like my subject states my THX Console will not save the dB rating after I close and relaunch it.. I am not sure if this is a bug or not but thats really my only issue at this point but sound wise I am running..
Sound Blaster Audigy 2 ZS (fully updated software through auto-update)
Logitech Z-5500 5. Speakers
Any help would be appriciated, thanks.

I guess that is why it doesn't save that. Without Bass Redirection enabled, no Subwoofer signal is sent over the 6th channel, so the setting you are trying to change has no effect. To really change the bass volume, you need to change the Bass Volume in your Mixer, because that works as an equalizer and affects all signals under a specific frequency.
The bass management is then done by your speaker's circuity, the crossover network, which extracts the bass from the rest of the channels and sends it to the subwoofer.

Exchange 2007/2010 Console doesn't show up Exchange 2007 Databases after RBAC Implementation

I have implemented a RBAC model after which Exchange 2010/2007 Console won't show up Exchange 2007 Mailbox Databases.
Everything was working fine up until the Users were members of "Exchange Recipient Administrators" Group.
I have created Custom Roles based on PArent Roles, Mail Recipients, Mail Recipient Creation, Distribution Groups & Public Folders and assigned that to a universal security group "Helpdesk operations". I removed membership for Helpdesk operations
from "Exchange Recipient Administrators" Group and assigned the Custom Roles to "Helpdesk Operations" using the cmdlet below:
New-ManagementRoleAssignment "Custom Role" -SecurityGroup "HelpDesk Operations"
Exchange 2010 console shows Exchange 2010 Databases but not Exchange 2007 DAtabases. Exchange 2007 console doesn't show up any databases on New-Mailbox and simply displays a message "No Objects Found".
Even Get-MailboxDatabase REturns blank output on Exchange 2007 SHell. Please help me with this and let me know in case if there is something that i need to be looking at!
any help on this is much appreciated.
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
Information is provided is "AS IS" and confers NO Rights!!

Hi,
I recommend you use the following cmdlet and check the result.
Get-MailboxDatabase -Server "Exchange 2007 server name"
In my environment, if I don't specify the Server parameter on Exchange 2010 Management Shell, Exchange 2007 mailbox database can't be displayed. If I specify the Server parameter, Exchange 2007 mailbox database will be displayed.
What's more, please check if the account you use has been delegated the Exchange View-Only Administrator role.
Here is a thread for your reference.
Get-MailboxDatabase
http://technet.microsoft.com/en-us/library/bb676367(v=exchg.80).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

Sun Oner Application Server 7 Admin Console doesn't start

When I start the Admin Console for Sun One Application Server 7, and after I login, the admin console doesn't display in the browser. I have tried starting the admin console with IE and Netscape browser, but the admin console has failed to start in either IE or netscape.

-Type this in your IE
http://localhost:4848
-IF it does not work type the following
http://kishan:4848 ("kishan" is your machine name)
-IF it does not work do the following
Forgot the Admin Server Port Number? If you do not remember the HTTP server port number of the administrative server, you can inspect the administrative server's configuration file to determine the HTTP server port number.
1. Navigate to the <domain_config_dir>/domain1/admin-server/config/ directory.
2. Open the server.xml file in your favorite editor. Look for the element:
<http-listener id="http-listener-1" address="0.0.0.0" port="4848"...
In this case, port 4848 is the HTTP port number in use.
Forgot the Username or Password? If you do not remember the administrative user name that was supplied during installation, try the user name "admin". This is the default user name specified in the server configuration dialog during installation. If you still cannot determine the user name, look in the following file:
<domain_config_dir>/domain1/admin-server/config/admpw
This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.
Port Not Accessible? If the connection was refused when attempting to contact the administrative server's admin console application, it is likely that the administrative server is not running. Go back to the beginning of this section and double check the your startup procedures and the content of the administrative server's log file to determine the reason why the server is not running.

Console doesn't recognize database anymore

Hi folks,
Being kind of an oracle newbie, I suffer some strange problems: I had Oracle 8i up and running perfectly well on my w2k machine. I was able to do backups and exports from out of the console. Next day, the export failed due to an authentication error which must have come out of a sudden since nothing in configuration was changed. I set a new system password for the default node user which solved this problem. Now a protocol adapter error was announced. I shut down and rebootet the entire system and now, console doesn't see my database anymore, though all services ar started. What's this?
Regards, Claus.

After reinstalling iTunes, it works.

The app console doesn't match. It gives error -1712

THE app console doesn't match. It gives erro -1712. The store has already changed the memory

Try using Google's DNS instead of the one your IPS is providing.
- To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
- For the computer see:
Public DNS — Google Developers
- Did anything happen to your router right before this started? Maybe the router is blocking the port used.

Management Console Doesn't Display

Hi Experts ,
we are facing issue with Management Console doesn't display after login ,none of the screens shows any user or activity data.
Our DB admin went through the prerequisite list from note 1262933 and everything appears to be correct with the setup.
Regards
VYVadan

Hi. Just to clarify. Is the bpclog table being populated in the appserver db?
Byron

Console doesn't start?

Hi
I installed WLS6.0 SP1 to NT4 SP6. Console doesn't start when I'm logged to
our domain. Dr. Watson reports application error in beaexec2.exe. When I'm
logged in as a local administrator console works fine. What's wrong?
Seppo

I am having the same Problem.Can anyone give some suggestions

X-Fi THX console for windows vista? (need low pass to subwoof

Hi, back on XP the installation CD included a THX console that could be used to setup a LFE or subwoofer channel. Since I've "upgraded" to vista x64 I haven't been able to find a working version of this nor a workaround. I have a plugin for foobar which accomplishes this task; but, I'd like to take advantage of it while watching dvd's and gaming.
Does anyone know where I can find a THX console for Vista x64 or any other way to do this uni'versally?
Thanks,
Rob
ps: this is for the x-fi xtrememusic

Let me try to explain it again. First you install the old windows xp. Go to the sound blaster install folder. Look for the THX console folder. Save it to a disc. Install windows vista. Put the saved folder back on your computer it can be anywhere. Install the vista driver and then you will be able to open the .exe file in the THX Console folder and it should work. It works for me. Hope it works for you.

Audigy WORKING with 5.1 AND software(EAX, THX console, bass redirection) Vista 32

This has taken me a week of fiddling, but now on Vista Ultimate 32bit I have most things up and running...
EAX effects and environments from the control panel work, THX console works, surround mixer, speaker settings work..Also I'm getting proper surround output =]
This isn't a complete fix; EAX console and the EQ don't work, and also it only lets me set 6bit@96khz in the control panel, 24bit isn't there =[
I'm using an Audigy 4...
First, I installed creative official vista drivers. Then uninstalled the drivers but left audio console installed.
Install Pax-Apps 2.32sp2 http://www.youp-pax.org/viewthread.php?tid=443&extra=page%3D
Reboot...now my audigy was not working here but all the creative apps were installed. THe youp-pax drivers caused a BSOD after the reboot but after another reboot it went into windows just without the sound working.
Run the Pax installer again, select remove drivers and remove them but leave the software, reboot.
Install the official Creative windows XP drivers. This is the hard step, I had some problems and had to reboot and uninstall-reinstall about 0 times before I finally got it working...but now it works.
Still, I want my 24bit and my EAX console =[

I have this (well kinda) problem also. Sometimes my system (see below) will work fine, but then suddenly the channels will swap or the sub just won't give any bass.
Have tried contacting both Creative and Microsoft support for some insight but nothing apart from the standard stuff so far. I guess its a vista/4Gb RAM issue. Looking forward to using WaveRt drivers in case they give a difference.
Thanks,
Mith,
Gigabyte P35 Mobo
4Gb 800Mhz RAM
Vista Ultimate 64-bit (with SP RC)
Creative X-fi Xtreme Music
Core 2 Duo (6750 @ 3.2Ghz)
Message Edited by Mithias on 03-7-2008 04:4 AM

Petition for Creative to provide updated THX console for Audigy 2Z

Hi everyone
I do not wish to upset the apple cart here, but I felt something had to be posted on this very forum. Yesterday I installed an X-FI Fatalty FPS soundcard for a client, and might I add it is a very fine soundcard indeed. I noticed the software/driver CD contains an updated and unreleased version of the THX console found on the Audigy 2ZS/4 driver CD's.
Now I can understand you might think so, who cares if it's newer?
Well this all new THX console application has a bass profile tab where you can configure the level of your sub and the size (radius) of your speakers, but the real must have feature is this new THX console contains profiles for several Creative Brand Speakers. E.g. instead of just having generic 7. speakers you can chose to Gigaworks S750 or Inspire T7700 from the menu. In fact it includes speaker profiles for a lot of speakers.
Since the 2ZS/4 are already THX approved soundcards which include the THX console software application I think it is only fair Creative release an updated version of this application for us to, because it is far more useful than the one bundled on our CD's
Might I add I also like the new Entertainment Centre.
Please add your name to this list and if we generate enough attention, who knows maybe Cat will pass on to the software team our interests.
Remember we have just got the updated version of the DVD Audio Player, so almost anything is possible.

Hi <SPAN>johnston2
Thanks for offering to help. I copied the THX console off my clients driver CD onto my USB Pen, unfortunately it does not work with the Audigy 2 ZS, for some reason it does not install and I do not know how to get it to run
I would very much appreciate any help you are able to offer, but obviously for a kosher application for the Audigy 2 ZS/4/4 Pro by Creative would be awesome.

Thx console for x-

I need to redirect my bass singal ...
i have been told that i can switch that on in the thx console ... but well ... I cannot download that app for my x-fi...
is the thx console even available for the x-fi?
ty in advance!
Greetings
Grim

I am trying to find out where i can get this software for THX configuration. I bought an XFi Extreme Music card. However, the Driver/software CD was cracked when I opened the box. This didnt bother me too much as im on XP64 and it probably would have been of little use to me. Now I hear about this THX Config software, I would like to try it. Is there a version that supports XP64. Also where can I get the documents that explain the features of the Driver configuration utility for XP64. I did find one help file for the XFi, but its about the hardware not the software.
Thanks for any help
Sean

THX Console doesn't exi

Similar Messages

Maybe you are looking for