THX Console wont save Subwoofer dB after clos

Hello, like my subject states my THX Console will not save the dB rating after I close and relaunch it.. I am not sure if this is a bug or not but thats really my only issue at this point but sound wise I am running..
Sound Blaster Audigy 2 ZS (fully updated software through auto-update)
Logitech Z-5500 5. Speakers
Any help would be appriciated, thanks.

I guess that is why it doesn't save that. Without Bass Redirection enabled, no Subwoofer signal is sent over the 6th channel, so the setting you are trying to change has no effect. To really change the bass volume, you need to change the Bass Volume in your Mixer, because that works as an equalizer and affects all signals under a specific frequency.
The bass management is then done by your speaker's circuity, the crossover network, which extracts the bass from the rest of the channels and sends it to the subwoofer.

Similar Messages

Cisco Access Point Air-Lap1242: It wont save config

Hi
I have 2 Air-Lap1242 that wont save their config after reboot.
They are managed by a WLC (4404) and it all seems pretty fine and dandy, but when i reboot them, they dont want to save anything.
I am setting them up as bridges (mesh), and it works until i reboot them, then I have to do it all over again.
Using CLI to type in "write mem" or "copy running-config startup-config" only results in:
"Building configuration... [OK] ->
NVRAM Verification Failed "
Anyone who has any sort of solutions to this? Ive tried to google hard on the subject, but didnt get any wiser.

When the AP joins the controller, I set up the settings for its intended use, in this example a bridge. (one ap as root, one as mesh).
After everything is filled out, i reload the ap's and all is good. Then i fill in the "mesh"-folder that appears after reload and reload the Ap and once again all is saved on the Ap. If I disconnect the power to them, both Ap's return to factory default.

X-Fi THX console for windows vista? (need low pass to subwoof

Hi, back on XP the installation CD included a THX console that could be used to setup a LFE or subwoofer channel. Since I've "upgraded" to vista x64 I haven't been able to find a working version of this nor a workaround. I have a plugin for foobar which accomplishes this task; but, I'd like to take advantage of it while watching dvd's and gaming.
Does anyone know where I can find a THX console for Vista x64 or any other way to do this uni'versally?
Thanks,
Rob
ps: this is for the x-fi xtrememusic

Let me try to explain it again. First you install the old windows xp. Go to the sound blaster install folder. Look for the THX console folder. Save it to a disc. Install windows vista. Put the saved folder back on your computer it can be anywhere. Install the vista driver and then you will be able to open the .exe file in the THX Console folder and it should work. It works for me. Hope it works for you.

Settings changed wont save after reboot

Any changes that i do in my Mac, wont save after reboot.
If i change the settings on my mouse (unchecking Scroll direction) next time i reboot, it will be checked again.
Any changes that i do to my Finder sidebar (like adding My Main Drive not visible, add downloads and pictures, change the foler view as columns) they are all gone after i reboot. Its getting freakin anoying. I Google for a solution but to find none.
When trying to opening Calender, it says that i dont have permission. I have gone to the application and checked and made sure that all acounts have r/w permissions.
On the Dock, i uninstalled an app and next reboot i will get a question mark, even tho i removed it before it comes back after the reboot.
Thanks for listening.
Burn1nator

May sound silly, but are you sure you're not logging in as the 'Guest' user? What privileges does the user account you're using have? Check in
 > System Preferences... Users & Groups
that the account you're using is Admin. If you're using a Standard account, are parental controls enabled?
If you are admin, try resetting your permissions and removing the sys pref property file. Before you do that, backup your system and user data. Once you're backed up, open Terminal and copy/paste the following into the Terminal window:
rm ~/Library/Preferences/com.apple.systempreferences.plist
hit 'return'. If the prompt returns without an error (as it should), paste this
sudo chown -R `id -un` ~
hit 'return'. Enter your password as requested, but type carefully as it will be invisible while you do.
This will take a while, but after the command finishes (i.e., when the prompt returns), restart the mac.
After the restart, set the mac up the way you want, then test whether the problem is fixed by restarting again to see if your changes were kept.

THX console, save/load different pres

Hello,I have a SB?X-FI extremegamer which I use both?for movies and for?gaming. I used the THX console to calibrate distances and angles of my 7. surround system?but those values are relati've to where I'm sitting. In fact, when I play games I'm -obviously - sitting at the PC and the front speakers are very close to me (~0,6m). Instead, when I'm watching dvd movies I sit on the couch and the front speakers are farther away (~2,2m). How can I switch between different presets in the THX console without having to change manually?each value every time I go from games to movies and viceversa?thanks

While we're on the subject, what do those distance/angle presets actually do? Just wondering.

THX Console (Vista) - Need Low Pass for

Hi, back on XP the installation CD included a THX console that could be used to setup a LFE or subwoofer channel. Since I've "upgraded" to vista x64 I haven't been able to find a working version of this nor a workaround. I have a plugin for foobar which accomplishes this task; but, I'd like to take advantage of it while watching dvd's and gaming.
Does anyone know where I can find a THX console for Vista x64 or any other way to do this uni'versally?
Thanks,
Rob

Let me try to explain it again. First you install the old windows xp. Go to the sound blaster install folder. Look for the THX console folder. Save it to a disc. Install windows vista. Put the saved folder back on your computer it can be anywhere. Install the vista driver and then you will be able to open the .exe file in the THX Console folder and it should work. It works for me. Hope it works for you.

Windows own calibration v.s THX console

'Windows own calibration v.s THX consoleD Here is my overdetailed picture over the settings i prefer to have in my life
http://imagesocket.com/view/_hhh_Acti'veWindow88.jpg
This is windows xp volume control that doenst save?these settings after restarting computer, if i understand it right thx console shall be creatives replacer counterpart? (yes i have heard the rumours about that thx console allso have issue to save the settings) but still i wanna test this on MY computer
if so i first of all gonna need some translations since im a volume drawerbar guy, who doesnt have any preferences what db sound like and how you do its math
especially not?in 5. headphones from baracuda, therefore i think?me not care about "distance" settings by the way, "angle" settings?i dont know if its concerns my headphones?..but who knows what?freaky limb angles?i have on?this so called?head of mine? ?
Shall i write around?0 db or....02 db?i?honestley dont?know? if?the meaning is to match all thoose above windows settings
?http://imagesocket.com/view/gkjgj_Acti'veWindow57a.jpg
This is weard, i see now that i dont even have control to get over 0 on any of the?THX bars, only -
?why? i have just buyed a xfi-gamer edition, i hade control over THX when i still hade my audigy 2 thats all i know
Message Edited by Kloppstock on 0-4-2009 07:02 [email protected]

Bump
The question is really only how you work when you are deciding the level [dB] in calibration
so i know how this number system works

Audigy WORKING with 5.1 AND software(EAX, THX console, bass redirection) Vista 32

This has taken me a week of fiddling, but now on Vista Ultimate 32bit I have most things up and running...
EAX effects and environments from the control panel work, THX console works, surround mixer, speaker settings work..Also I'm getting proper surround output =]
This isn't a complete fix; EAX console and the EQ don't work, and also it only lets me set 6bit@96khz in the control panel, 24bit isn't there =[
I'm using an Audigy 4...
First, I installed creative official vista drivers. Then uninstalled the drivers but left audio console installed.
Install Pax-Apps 2.32sp2 http://www.youp-pax.org/viewthread.php?tid=443&extra=page%3D
Reboot...now my audigy was not working here but all the creative apps were installed. THe youp-pax drivers caused a BSOD after the reboot but after another reboot it went into windows just without the sound working.
Run the Pax installer again, select remove drivers and remove them but leave the software, reboot.
Install the official Creative windows XP drivers. This is the hard step, I had some problems and had to reboot and uninstall-reinstall about 0 times before I finally got it working...but now it works.
Still, I want my 24bit and my EAX console =[

I have this (well kinda) problem also. Sometimes my system (see below) will work fine, but then suddenly the channels will swap or the sub just won't give any bass.
Have tried contacting both Creative and Microsoft support for some insight but nothing apart from the standard stuff so far. I guess its a vista/4Gb RAM issue. Looking forward to using WaveRt drivers in case they give a difference.
Thanks,
Mith,
Gigabyte P35 Mobo
4Gb 800Mhz RAM
Vista Ultimate 64-bit (with SP RC)
Creative X-fi Xtreme Music
Core 2 Duo (6750 @ 3.2Ghz)
Message Edited by Mithias on 03-7-2008 04:4 AM

THX console for xfi xtreme music?? cant find i

hi i have the xfi extreme music soundcard with the latest drivers and console Application installed.
i have looked everywhere for the THX console. i noticed on a webpage its next to the speaker selection.. not on mine..
it has the thx logo aswell as 2 others on the front of the control panel?
do i need to install anything extra.. connected via analogue.
cheers

The default location for the iTunes library on a Vista system is in:
C:\Users\[your username]\Music\iTunes\
After getting into the choose library dialog, if you browse inside there do you find your own library inside there?

Console Launcher/THX-Console do not recognise X-FI Titanium

Hi,
I bought a PCI-E SB X-FI Titanium yesterday. Unfortunatly I have got some major Problems.
First no sound was played, but I managed to fix it. Then I tried to install the Creative Console Launcher & THX. No Chance.
The Installation either won`t recognise that i have got the newest Media Player or it told me that no suitable soundcard is installed (tried different versions), although Windows recognises it as SB X-FI and sound works "fine".... Also my mic isnt working. After a whole day of searching and severals reinstallations of several driver versions I am now using the daniel k drivers .. Console Launcher and THX-Console are installed now, but if I try to start them, it tolds me that it hasnt recognized a suitable soundcard again....Mic also still isnt working, but sound is really fine. (I found a solution for the mic problem, but the console launcher is required...). Right now I'm really pi... off, and considering to send the card back and buy another one, but hopefully someone can help me, because the sound seems great to me.
Onboard sound inacti've
daniel k .
Vista home premium 64bit SP
Asus P5W DH Deluxe?
4 GB Ram (read something about it, but didnt fully understood the link between ram and soundcard)
Medusa 5. Headset
Thank you for your help in advance and sorry for my bad English.

Here is a _repeat_ of a post I did awhile ago which may be useful to you for making Titanium work and I hope it is of some benefit to you:
[color="#0000ff" size="2">Ok, good news. I was able to install the Titanium again on my Vista 32-bit home premium machine and the mic volume is loud and fine.
[color="#0000ff" size="2">Because of the way that Vista works with hardware you must have at least one time previous to this procedure gone into Control Panel/Performance Information and Tools/and click on link called Update My Score and Vista will run a 2 min hardware test and adjust itself for your hardware.
[color="#0000ff" size="2">Make sure your?microphone is plugged into the soundcard in the appropriate jack during this whole procedure (may or may not make?a difference).
[color="#0000ff" size="2">) Went into BIOS and made sure the onboard audio thing was disabled.
[color="#0000ff" size="2">I believe I also disabled the 394 port (may or may not matter).
[color="#0000ff" size="2">2) Went into Device Mgr and removed 2 of the High Definition Audio Device things in Sound and Game Controllers section and removed 2 of the High Definition Audio Device things in the System Devices sections as well.
[color="#0000ff" size="2">If you see the Soundblaster listed there too then right click it and uninstall it from there at this time.
[color="#0000ff" size="2">3) I rebooted then checked Device Mgr and it had put the High Definition Audio Device things back. I did not disable them or uninstall them this time.
[color="#0000ff" size="2">4) Using Windows Explorer I searched for and deleted any Soundblaster Drivers I could find from my system.
[color="#0000ff" size="2">5) I cleared out all of the files in my Recycle Bin.
[color="#0000ff" size="2">6) I went to www.soundblaster.com[color="#0000ff" size="2"> and downloaded the latest beta driver that ends with 2_7_0006.
[color="#0000ff" size="2">7) I extracted the drivers to a new folder I created on my C dri've. I named the folder SBFix.
[color="#0000ff" size="2">8) I made sure my antivirus program was all disabled and not protecting me.
[color="#0000ff" size="2">9) I went into?SBFix folder and double-clicked the Setup Application.
[color="#0000ff" size="2">0) It came to a menu that offered me the option to install the driver or uninstall all drivers. I selected the option to uninstall all drivers. It looked like it found some and was uninstalling them. If it asked to me to reboot I did so but I don't remember if it did or not.
[color="#0000ff" size="2">) Next I found that Setup Application again and this time I told it to install the driver. I did not select the option to overwrite any files if it found them.
[color="#0000ff" size="2">2) It installed them then wanted to reboot and I did and then I right-clicked the little speaker icon in the bottom right of my tray and click recording devices and I took a look and it looked like the soundblaster things were there. The Microphone FP and Line in were there but not the Microphone because one has to use the Creative Console Launcher to make the Microphone selection possible and I did not have that installed yet.
[color="#0000ff" size="2">3) I went back to www.soundblaster.com[color="#0000ff" size="2"> and downloaded the appropriate Creative Console Launcher and ran it.
[color="#0000ff" size="2">4) I rebooted then opened the Creative Console Launcher, went into the Settings button to make the selection for microphone.
[color="#0000ff" size="2">5) I ran the Setup Microphone wizard thingy in Windows and I could see that the volume levels were high.
[color="#0000ff" size="2">6) In the end there is no place you can do a checkbox for +20db boost however it is that loud anyway as if a +20db boost option had already been selected. After you've done the Setup Microphone test locate the mic volume slider and slide it all the way to the right again because the Setup Microphone test will have automatically moved the slider toward the left during the test.
[color="#0000ff" size="2">My system has the ASUS Rampage II Extreme x58 chipset motherboard. Intel chipset.
[color="#0000ff" size="2">Not an NVidia chipset motherboard. Somewhere I had seen somewhere on the Creative support pages that some motherboards only allow video cards to be in the PCI-e slots. I believe the NVidia chipset motherboards may be this type. This is the 2nd Intel chipset motherboard that I've been able to install the Titanium on and get proper loud mic volume. The other motherboard I got it to work fine on was an ASUS Maximus Extreme that had the x38 Express chipset.

Photos from email wont save

When i want to save photo's from email with my ipad, the photo's wont appear in my album. I only see pictures dubbeld , so pictures that are already there will multiply in the amount of pictures i want to save from mail after saving photos from email.

Sorry sorry
Photos are there only not in the bottom, the appear somewhere in the middle of my album.
No action needed

THX console hangs with pegged

While slidiing the THX control bass redirection/cutoff freq. slider (was using it for a minute or two), the thing locked up. I checked the taskmanager and one CPU is pegged. The offender is
CTXFISPI.EXE
Must be in a infinite loop, maybe waiting on the driver? Sound still works. Just the THX console program is not responding. Have to kill it to put me out of my misery.
Also, in Game mode (I'm using the web driver), lots of ticks in bf942. If I use Entertainment mode, no ticks.
xfi pro
Tip: In the THX console, if you use LARGE for your front speakers, the subwoofer channel won't get any general output (perhaps only used when it gets special LFE input?). Switch it to small and you get the woof back in. That's in entertainment mode, at least. That may differ in other modes.

Noone who knows?

THX Console, only with the cards own decod

Hey. I am interested in knowing how the THX Console applies it settings. Earlier I read a post suggesting that the THX Console only applies the settings you have done when using the cards (X-Fi Xtreme Music in my case) own decoder.
I?have?set?the?Audio?Console?to?use?an?external?de coder,?and?I decode?the?audio?from?the?movies?I?watch?with?ffds how's software audio decoder. It is a great decoder, but I miss the setting to?set speakers as small or large. Since?I?want all frequencies under 80hz only from?the?front?speakers and?the acti've?subwoofer?and?not?the?center?and?surround? speakers.
This?setting?is?available in the THX Console, that is why I am interested. The other settings in the THX Console are already available in ffdshow.
The card is connected to my home theater through analog multichannel.

Noone who knows?

THX Console - Callibration does not remmebered setti

Hello,
i have creative audigy 2 and work very well, but THX Console -> Callibration does not rememmbered my setting and after reboot every time i must reconfigure it. How i fix this problem? I have lattest THX Console.
Regards,
John Smith

Hi folks!
Well, it's been a long time, since this thread was created! Unfortunately, I'm forced to re-open the topic once more - though, I don't think I'm getting any helpful replay anyway, or? ;-)
First, Jeremy, AV may be the solution, but in most cases it isn't! In fact, you can pretty much mess around in the registry, without being bothered by any AV or FW alerts (eventually, Windows itself will refuse the change settings due to some access-restrictions) - I know it, believe me!
Second, John, I do have the same problem with my Audigy 2 ZS (now for a pretty long time!). Creatives is well aware of the problem, but just did nothing (or almost) to change it. When I bought the card and installed the drivers, no THX-settings were saved at all. It was just because of bad drivers! Although Creative offered a patch soon afterwards, the problem was solved only partially.
Because I don't think, Creative will improve the drivers anymore; I actually was hoping to find anyone knowing where in the Windows-registry one can find the parameters (distance, dB, angle) of the THX settings!?! Does anyone?
Help would be much appreciated! Thanks in advance!!
Cheerio,
JackaL

Password wont save

after being harrased by the popup to upgrade i finally did and i wish i never had. The password now wont save I have the box checked to sign me in when skype starts and it still makes me type it every time. I dont know why they took away the country flags or made the account balance hard to find. Skype was so nice before now i hate it! CAn someone at least help me figure out how to get the password to save??? Thanks
Solved!
Go to Solution.

If you update Skype to the currently latest 7.2 version, then you will again see account balance on the main screen.
http://www.skype.com/en/download-skype/
See also this discussion:
http://community.skype.com/t5/Windows-desktop-client/7-0-and-your-feedback-on-the-new-chat-UI/m-p/38...

THX Console wont save Subwoofer dB after clos

Similar Messages

Maybe you are looking for