Thx for wine 0.9.60. Code freeze in effect, on towards wine 1.0!

0.9.61 source code is ready.
http://www.winehq.org/

Yes, thanks for the Wine update. I find that this version of Wine does fix a couple of significant problems which I had been experiencing with version 0.9.58. Wine has evolved rapidly, and there can be real value in keeping it up to date.
I know that some people don't see the importance of Wine, but for folks like myself, who have no choice but to use Windows at work, Wine is a godsend for accessing work data at home on my Linux systems. Also, I've managed to encourage quite a few Windows users to experiment with Linux because of Wine - call it a comforter if you will, but it's a vital package to bridge the gap.

Similar Messages

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

NForce4 SATA Drivers for Win 2003 ?

I need load Windows 2003 Enterprise Edition in my new system --K8N Neo4 Platinum + Winnie 3200--, but i dont know if the 2000/XP Disck should work properly with this OS.
Are there any special drivers to load Win 2003 under F6 key method ?...Where can i find them ?...Will the 2000/XP drivers work with 2003 version ?
2- What version of nForce drivers should i use with win 2003 ?
3-What graphic drivers should i use with win 2003 and 6600GT ?
Thx for the help.

2000 drivers for windows 2000 .
xp drivers for xp/2003 . (2003 server os is based on xp)

I have CS5 Master Collection for Win. Can I upgrade to 5.5 for Mac?

I currently have Master Collection 4 for Mac, and Master Collection 4 for Win. I upgraded to CS5 for Win using my CS4 for Win license.
Since it costs less to upgrade from CS5 to 5.5 and Adobe doesn't allow one license key to be flip-flopped between platforms , I am consolidating all my software and am choosing OS X.
Is it possible to purchase the 5.5 upgrade to OS X by citing CS5 for Win?
Thx!

The other possibility...and you'd have to act very fast, is to do a platform swap now of CS5. The benefit there would be that you would get to legally have CS5 and CS5.5. If you wait and upgrade to 5.5 using the crossplatform upgrade, you'll need to destroy the old CS5 media and delete the software.
Could come in handy especially for InDesign.
Bob

Restore pse 12 and premiere elements 12 for WIN-PC i.

I've lost my copies of Photoshop Elements and Premiere Elements for WIN PC, in a disk crash.
The adobe site that I visited does not have download copies in English.
Looking for help!

Barbara,
Yes, I accessed the "updates" menu from the Help pull-down menu. I also accessed the updates using the Mac Terminal application with results shown in my original post. Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
Update Failed
   Updates could not be applied
   The error log file may help you in identifying the problem. The, try updating again. If the problems persist, contact customer support for further assistance.
The error log file read as follows:
   Photoshop Camera Raw 8.5
   There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
   Looking at the the output of the Mac Terminal app, it shows:
   ... hdiutil: attach failed - no mountable file systems
   Is this relevant?
Regarding your follow-up message pointing to:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
Thanks

Does my PSE8 serial for Win work on Mac?

Hi,
I just recently bought PSE8 for Win and am now considering to switch to Mac. Can I use my PSE8-for-Win serial number to activate a Mac test version?
thx for your help

If you're in the US and you contact Adobe sales they can crossgrade you, as long as you have the latest version on the other platform. It's just a shipping and handling charge. Be sure to contact Sales/customer service, NOT technical support.
But if you want to use the windows version, too, you must buy another license, as Ankush said. For the crossgrade you have to give up the windows version.

Bus-Master DMA using Common Buffer for Win XP driver

Explain the basic steps required for Bus-Master DMA using Common Buffer for Win XP driver.Explain the device description struture "MaximumLength" field usage also.Explain the usage of addresses returned by
AllocateCommonBuffer. Provide sample code if any.

amar wrote:
> Explain the basic steps required for Bus-Master DMA using Common
> Buffer for Win XP driver.Explain the device description struture
> "MaximumLength" field usage also.Explain the usage of addresses
> returned by
> AllocateCommonBuffer. Provide sample code if any.
Sounds like a task assignment in high school to me.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

HELP ME PLEASE MY MAC IS ASKING FOR A SYSTEM LOCK PIN CODE AND I NEVER SET ONE HELPHELP HELP

ok so i tried enabling iCloud/Find my mac onto my macbook pro,and it restarted to finalise the process,but when it started back up its asked me for a system lock pin code,though i never set one???? please help omg im crying

Here's my guide: How to: Unlock System Lock PIN Code

HELP !! My iPod keeps freezing i can go on it for about 10 secs then it freezes, i have to keep restarting it and it doesnt show up on itunes when i try to restart it please HELP

I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL

- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Satellite A350 - Toshiba service station for Win 7 is not working

I am using a Toshiba A 350 and downloaded Toshiba Servc\ice Station utility for win 7.
It fails to open (even if admin rights).
The TsmachInfo service is started in srvices.
Any workarounds or do i have to install somthing more to this working?

Hi
As far as I know you have to unzip this firstly and then you have to execute the exe file
Check this
Otherwise its a OS issue because the exe file should run properly and you should be able to install this tool.
Greets

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error when crawling "Unable to load stemmer for locale 1033. Error code 80040111."

In the Sharepoint Search Service I get tose error "MAPI: Logon failed. " in the log and "Unable to load stemmer for locale 1033. Error code 80040111." in ULS.
The error code 80040111 is well a relation with Mapi but what about stemmer???

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

Depreciation posting rules are not define for area 00 in company code

Dear Expert,
Would like to seek for help, when I run a customize report (AUC without PO not yet capitalized report the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual.
Between., does SAP have the standard report to list the asset which is AUC and not yet capitalized?
My version of SAP is ECC 6.0.
Kindly advise.
Regards,
Karen

Hi,
Thank you for the prompt reply, why the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual?
Please help.
Regards,
Karen

Thx for wine 0.9.60. Code freeze in effect, on towards wine 1.0!

Similar Messages

Maybe you are looking for