THX Setup Console for Auzentech Cards (Home Theatre HD)

I know that using DK's packs i can install the THX console and i 've used them for my older x-fi cards(really great packs for those older cards btw!). but installing his packs seems to alter other things even though all im installing is just the THX console. is there a way i can install just the THX console for my auzentech Home Theatre HD without one of DK's packs?

Rootdown4594 wrote:
I know that using DK's packs i can install the THX console and i 've used them for my older x-fi cards(really great packs for those older cards btw!). but installing his packs seems to alter other things even though all im installing is just the THX console. is there a way i can install just the THX console for my auzentech Home Theatre HD without one of DK's packs?
Today is your luck day.
Just sent this to a friend, so I've decided to make it publicly available.
http://hotfile.com/dl/3546352/e568d/AuzenTHXConsole_3_50_05.exe.html
There is no hardware check, so it will install on any system, but obviously will only support devices with a X-Fi PCI or PCI-E chipset.
Finally, to make it clear, it supports Auzen X-Fi Prelude, Forte and HomeTheater HD cards.

Similar Messages

THX setup console, no digital out

I have Audigy 2 ZS notebook. I connected it to my home theater system via optical cable but I can not get 5. sound from all of my speakers. I can not select digital output on THX setup console. It is even not highlighted. Am I missing something? Looking forward to getting help.

hey, i'm a newbie to all of this but i remembered that when i installed the sound card there were two sets of drivers, one for 5. surround sound and one for 2. stereo sound. you might not be able to select 5. surround because the wrong drivers are installed. try uninstalling it and reinstalling it with with 5. from the initial set up. maybe that will straighten it out. just thought that might help. but if it doesn't, well, i'm a newbie......

THX Setup Console Involuntary Configuration Cha

Presently I have a 5. speaker selection which works fine (sometimes). For some unexplained reason my default settings in THX Setup Console periodically change from 5. to 2., with the resultant cutoff of 3 speakers. At the same time, the location of my Front Center Channel Selection changes from my settiing of 'Above monitor' to 'Below monitor. My default changes remain in place for a variable time, ranging from several days to several weeks. I have installed the latest Audigy update (SBAX_WEBUP_LB_2_08_0004) with no effect. Win XP Pro, SP2.

It looks like you are not hitting r2 through the console, you are hitting r2 via telnet.
If this is true, you should be able to put a password on vty 0 4 and sucessfully connect.
"Password needed and none set" is a telnet error ... not someting that would come from a console connection.
In your host definitions on the TermServer, remember to use a loopback address of te TermServer (along with the port 2001, 2002 ...).
Like: host r2 192.168.1.1 2002 <--192.168.1.1 is the loopback address of the termserver (itself).
Good Luck
Scott

THX setup console is NOWHERE to be fou

so far this question has been posted about 40 times and there has been no solutions for it so i'll ask it again,I?cannot find the THX console anywhere, it is on my setup disk but when i run it i get "setup has experienced an error" there is no download for it anywhere (accept for audigy) and i have tried about0 different things from various post to try and resolve this, including a full uninstall of all drivers and sofware (in safe mode) STILL no thx console, and i assume this is where the proper speaker config settings are as the creative drivers have none,So i have a sound card that is more expensi've than my motherboard but i get better 5. from my realtek on board sound!!?is there a way to fix this!!!theres not much point in 5. if you have no rear speakers,?it is getting old realy fast and so far the only fix iv found is to just not use the card, which isnt what id prefer to do with a brand new sound card.

Thanks for the reply, those drivers look pretty cool, i'll give them a try later!!
I managed to resolve the problem, its caused when you get the latest drivers and install them WITHOUT installing the ones from the disk, once youv put in the new ones you cant put in the old utilities, so for anyone else getting this problem. .uninstall all creative software (ALL)2.uninstall device in device manager.3.restart.4.install the drivers and utils?from your disk.5.restart, then install newer drivers.6.JOB DONE!?

Sound Blaster X-Fi Xtreme Music Bass level control in THX setup cons

hi, i have a Sound Blaster X-Fi Xtreme Music, plugged in to a Logitech X-530 speaker system. The problem i'm having its in the bass redirection controls in THX setup console... The crossover frequency works fine, but i can't control the subwoofer level, i tried it a few days ago and it worked, it was the first and last time it worked... any help?

Hello, I know this is un related but I require your help. Im on the same setup as you but I have the next speakers up the X 540. However the sound card seems to be louder on the left than the right. Is this something to do with the Crossover you mentioned?
Thanks for you help.
If you can help id be greatful if we could talk on msn?

Wireless Home Theatre Help.

Hi.
I am looking for a wireless home theatre setup.
preferably something transmits from my tv, rather than requiring a receiver/amplifier.
ideally, i am looking to spend less than $500.
thanks in advance.

Hey djdvda
If you're looking to skip the receiver, a soundbar like this model might be something you're looking for: http://bit.ly/11UfGT4
You'll need to make sure that your television has a digital optical audio jack before purchase, though; as you'll be using that type of connection to communicate audio to the soundbar from your television.
Tory|Community Specialist | Best Buy® Corporate

Problems with the/while opening the THX Setup Cons

hi everybody,
hopefully i'm not asking an already often answered question, but since i didn't find a solution for my problem on the initial forum search i'll try my luck with a new thread.
my first (little) problem is that whenever i open the thx setup console all volumes are set to the maximum. not that big of a deal, but still annoying. is there something i can do against this?
the second (not that big either) problem is, that the calibration settings, to be exactly the db-settings, in the thx console aren't properly saved. sometimes (i didn't yet find out after doing what or when or why) they are just changed, and i have to set them for my setup again. any ideas?
thx for your help in advance,
-vio

I had the same problem. Sometimes the settings just seemed to change, not sure why. I don't know of a fix and there is no save button.
I just finished uninstalling everything Creative and then reinstalled the THX Console off the original disc only, then the new Audio Console, then the new Beta Drivers. Everything is working fine for now. There is also an update for the THX Console, but I haven't installed it yet.
Good luck, hope this hel
ps.
Jason

X-Fi THX console for windows vista? (need low pass to subwoof

Hi, back on XP the installation CD included a THX console that could be used to setup a LFE or subwoofer channel. Since I've "upgraded" to vista x64 I haven't been able to find a working version of this nor a workaround. I have a plugin for foobar which accomplishes this task; but, I'd like to take advantage of it while watching dvd's and gaming.
Does anyone know where I can find a THX console for Vista x64 or any other way to do this uni'versally?
Thanks,
Rob
ps: this is for the x-fi xtrememusic

Let me try to explain it again. First you install the old windows xp. Go to the sound blaster install folder. Look for the THX console folder. Save it to a disc. Install windows vista. Put the saved folder back on your computer it can be anywhere. Install the vista driver and then you will be able to open the .exe file in the THX Console folder and it should work. It works for me. Hope it works for you.

For those who use home theatres...

I'm ready to switch to mac in the next week or so by hooking up a mac mini to a lcd tv and using my mac mini from the comfy chair, a scenario which I'm sure a good few mac mini users are in. Now onto my question which is about how you guys manage your keyboard and mouse on your couch. What keyboard and mouse setup do you use?Should I get just a normal everyday wireless mouse and keyboard or would a keyboard with a touchpad be better?
Basically I'm just wondering how you manage your keyboard and mouse in your home theatre and what would be comfy to use? I await feedback from you all as it would be a big help, cheers.
Windows XP

I use the apple bt keyboard and a logitech bt mouse. While I typically use it from a recliner, not the couch, I find it very convenient. I usually have the keyboard with 1/2 on my leg and the other 1/2 on the arm of the chair. I then use the mouse on the right arm of the chair. Works great. I also would have preferred the keyboard/trackpad though, but just didn't want to pay the money. One thing to be careful of is the difference between a Bluetooth keyboard/mouse and an RF (or other wireless) signalled one. The KeySonic wireless keyboard that is mentioned above is NOT bluetooth and will require a separate adaptor plugged into the computer that may or may not be included in the price. Range is also an issue with the other signal types. Bluetooth has a much better range (ideally up to about 30 feet/~10 meters).
Dual 1.2 G4/Intel Mini Dual Core Mac OS X (10.4.6)

What would my option be for home theatre

I just bought a new home theatre system recently with a blu ray player. I am buying a new 3d tv but dont want to waste my home theatre system. It is a 1000w system but most recievers i looked at run at 500-800w. I dont want to spend a fortune on a reciever but will a 700-800w reciever be ok with my speakers. Each speaker is roughly 180w. Any advice on what route to go would be greatly appreciated.

So many questions and issues here.
Did you purchase a HTIB? What brand and model of speakers?
A speaker will most always sound better with more power to a point and as long it is clean power and not distortion. What usually kills speakers are clipping amplifiers that produce distortion, not a good clean audio signal.
Is the 180W rating the nominal or peak rating that it can handle?
As far as 3D is concerned, I would be hesitant to jump on that right now. If you TRULY want to create a home theater experience your money would be better spent on the integration of your speakers in the room. You should also work on the acoustics and lighting in the room.
I feel that a better home theater experience is obtained by getting the lighting and room acoustics right. I would also recommend getting a lesser display, say a 57" Panasonic, and then pay to have it calibrated by an ISF certified technician. Make sure that you also calibrate the speakers using multiple methods and definitely the speakers in the right position.
You do realize that there is very little 3D content and you have to watch the TV in a dark room since the 3D technology pretty much reduces the output by 1/2. You must also wear glasses all the time(yuch) and the best picture is really only within 30 degrees from being straight on to the TV.
My best advice, research, research, and more research before laying down your $$$.
I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"

Home Theatre For My 42" Samsung Plasma TV

I was just wondering if any ol' home theatre is compatible with my tv. also im looking for a pretty sweet set-up not too too expensive..like $250-$500 range, any help would be great.
Thanks
Regards,
Nate

I was just wondering if any ol' home theatre is compatible with my tv. also im looking for a pretty sweet set-up not too too expensive..like $250-$500 range, any help would be great.
Thanks
Regards,
Nate

App for Samsung Home theatre Systems

Spotify is good but please make an app for Samsung Home theatre systems HT-C550 and up. There is pandora, netflix and all kinds of video apps but I cant find spotify on it

Updated: 2015-07-20Hello!
Your idea has been submitted a while ago but unfortunately hasn't gathered enough kudos (25 per year). In order to keep an overview of the active ideas in this forum, we will close this idea for now. However this does not mean that your idea has been declined by Spotify.
If you still feel strongly about your request, we encourage you to post your idea in a little different form again! Maybe now is the right time to receive the support of our community for your suggestion! ;)
Do you have any further questions on how the idea exchange is managed? Just click here!

Is the ATV right for my needs in home theatre

Ok, I am considering the ATV to go with a home theatre set up.
But, I have questions that I can't seem to find here.
The Tv networks, that ATV support, is lacking. Will there be more in the line-up in the future? I enjoy TLC, Military channel, History channel, Discovery etc.... I did not see them listed. Did I miss something?
If I don't need the Tv shows, rent/buy movies options, which don't seem to work very well by the looks of all the troubleshooting posts, will the airport express fulfill my music and photos streaming needs by using Front Row? Or is there more to the ATV that I am not seeing?
Also, is it better to hook the ATV to a receiver via HDMI or Digital optical-then HDMI from the receiver to the HDTV-thus letting the receiver do all the work versus going straight to the tv. Does one produce better sound and picture?
Cheers
Message was edited by: JAY39
Message was edited by: JAY39

JAY39 wrote:
Jolly Giant,
That comparison was extremely helpful. I have heard and read on many forums about the Mac Mini. I have read that the built in DVD player in the Mac, supports 1080P and 24 fps. So, by using the Mac Mini option, you don't necessarily need a blue ray player thus achieving the same results.
true. keep in mind, though, that you will need a keyboard and mouse to some extent to operate the mini. consider if you want those gadgets in your living room.
But, then I would have to run an ethernet cable internally from my computer to the tv, which is not a problem.
take a look @ powerline adaptors such as these.
With the ATV, I am concerned that the airport/wifi option will result in slow service. Is this true? I have Time Capsule as my router-which runs on N and not G band.
ATV is wireless n capable (so is the mini) and that should provide enough bandwidth to view HD content. both ATV and mini also have gigabit ethernet ports.
also, in my experience the difference between 720p and 1080p is hardly discernible for the average eye and it would take a real good TV set to be able to tell them apart.
personally, i like the mini to be my central media server because, once set up, i can put it somewhere in the house (don't even need a monitor attached - just use screen sharing) but i'd opt for the ATV in my living room every time.
so, it comes down to your preferences. ask ten people and you will probably get ten different answers.
whichever way you choose, you can't go wrong and that's the main thing.
enjoy ...

REmote Code for SONY Blu Ray Home Theatre System Model BDV-E500W ???

HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W. Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ??? Thanks so much !!!

I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W. Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ??? Thanks so much !!!

Trying to get sound from my X-FI Fatal1ty Titanium Pro. to Home Theatre via Optical Ca

Hi wondering if anyone has done this but I can't seem to get it to work. I have a X-Fi Fatalty Titanium Pro(w/o the Li've Dri've) on Vista 32-bit. Anywho it has the Optical I/O on the card itself and I am trying to hook this up to my Home Theater system. I have the optical already hooked up to the output on the card, and into my DVD input on my Yamaha receiver but am not getting any sound. So far that's all I have done, is there settings I am more than likely missing either in the Vista sound, creative console, etc....
Note:? I had this working before on my onboard sound and on XP, but since with the onboard I could only get some sounds playing through my home theater I decided to get this Fatalty Titanium card and the sound settings in Vista seems really vague not a lot of options.
Any help would be much appreciated.
Thanks,
Andy

I have a Yamaha RX-V3800, it's fairly new and supports just about every thing except true THX.
Not sure what DDL means, it just seems to me I am having a lot harder time with Vista setting than with XP. I had a X-Fi XtremeGamer installed but because it didn't have any Digital out so I had to use my onboard sound which has digital out in conjunction with my XtremeGamer. At least with XP you can choose say all my wave, payback sounds, etc.... to go through one device or the other, in my case either through the Realtek HD or the CL X-Fi XtremeGamer.
Now that I have the Fatalty and Vista and onboard sound disabled, I have a hard time seeing any options and settings if any at all that Vista has. ? Oh yes also with my old setup with the two sound devies, the only problem I had was that if I di'vert all the sound to my Home Theatre I would lose the sound in my Headset which I didn't want and had to change back and forth the audio devices to what I wanted.
I hope this helps answer your questions a little, and maybe help me answer mine.
Thanks for the reply.
Andy

THX Setup Console for Auzentech Cards (Home Theatre HD)

Similar Messages

Maybe you are looking for