Ti4200 and Live Update 2

When I use Live update for my Ti4200 VTP (MS-8886), it tells me that live update is only for MSI products and that my card is not supported.
Has anyone had this same problem or know why this is happening?
J. :P

I uninstalled the old one and downloaded the new one and installed it.
I think when I first had this problem, which was a while ago, my card had not been updated yet.
I had'nt downloaded a newer version since then.
It may be that your card has not been updated to the list yet.
Maybe, Maybe not.
Good luck,
J. :P

Similar Messages

  • Please help, simple question about Smart Playlists and Live Updating

    PLEASE for some reason I've never gotten an answer on this.
    I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
    When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
    Thanks so much

    Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
    The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

  • GF4 Ti4200-VTD8X(8894) and Live update 2.0

    Hello all
    Recendly i bought this graphic card (i mention on the subject). It's much faster than the Asus GF2 Ti i had before and all are working properly except of the updating program called Live update 2.0. I installed it and when i got connected to the server it announced me that the version running on the server is newer than mine and it gave me the option to update it as i did. When i reconnected to the server and asked for updates about my card's bios or driver it gives me the message that my graphic card isn't from MSI. The utility option works fine but as you can understand isn't the important one. As i was ecpecting the same results i got from the live monitor too.
    So i would like to ask the moderators of this forum or anyone who could know:
    1) Is my graphic card [MSI GF4Ti 4200 VTD8X (8894) 128 MB] combatible with the Live update utility 2.0 or not? The 3D turbo experience utility works fine on my pc.
    2)If i update the VGA bios and driver of my graphic card manualy (without the live update utility) from the MSI web site will i still have the tabs "MSI information" and "MSI clock" on my display properties?
    Thanks in advance
    Morte  

    I recently built a system (specs below) and installed this card (MSI GF4 Ti4200 VTD8X MS8894, 128MB DDR), and when I try to use Live Update 2 (version 3.33.000, from the CD that came with the card), I get the same message:
    "Warning!!! Your Display Card does not support MSI Live Update 2 function.  Note: MSI Live Update 2 supports the Display Cards of MSI only."
    I'm using the drivers/BIOS that came on the CD: Driver version 6.13.10.4107, BIOS version 4.28.20.05.11.  I see on the nVidia site that they have the 4109 drivers out now, should I try those?  ?(
    I have also made sure to do the suggested modifications to IE (and I don't have PC-cillin installed):
    "Note: In order to operate this application properly, please note the following suggests.
    -Set the IE security setting 'Download signed ActiveX controls' to [Enable] or [Prompt]. (System default is [Prompt]).
    -Disable 'WebTrap' of PC-cillin(R) or any web based anti-virus application when executing MSITM Live Update 2TM.
    -Update Microsoft® Windows® Installer"
    I downloaded a newer version of LIveUpdate (3.35.000), and installed it (after completely uninstalling the old version), and got the same results.  Nothing on my system is currently overclocked.
    Help!
    System specs:
    -Soyo SY-KT400 DRAGON Ultra (Platinum Edition) with latest BIOS & Chipset Drivers
    -AMD Athlon XP Thoroughbred 2100+
    -MSI GF4 Ti4200 VTD8X (MS-8894)
    -WD Caviar Special Edition 80 GB HDD, 8 MB Cache
    -512 MB Crucial PC2700 DDR (one stick, in DIMM #1)
    -TDK 40/12/48 CD R/RW
    -Daewoo 905DF Dynaflat 19" Monitor
    -Windows XP Home Edition, SP1/all other updates current
    -On-Board CMedia 6-channel audio
    -On-Board VIA 10/100 Ethernet
    -Altec-Lansing ATP3 Speakers

  • Podcast Smart Playlist and Live Updating - Fail

    I have a simple smart playlist -
    Media Kind is Podcast
    Plays is 0
    Live Updating ticked
    Syncs to iphone no problem but after playing a podcast it is not removed from the list as happens in itunes and my ipod. Does anyone have any ideas ?
    Thanks for any help

    Hello Altor,
    Have you had a chance to work through the solutions provided in this Apple support document? If not it would be a good place to start.
    http://support.apple.com/kb/TS3044
    B-rock

  • New VIA Drivers and Live-Update

    I noticed the latest VIA drivers are not yet available for download using MSI's Live Update prgram. Is it ok to download them seperately from the official VIA site? Or should I just wait for the Live Updater to get them?
    Just Wondering...

     :D
    I only used Live Update for a limited time ... mostly because there was too much time between launching an new driver and the driver becoming available through Live Update. The VIA drivers are available for more than a week, I think.
    Hans

  • Ms-8900 and live update not working

    In the beginning the live update auto-search would work, but now it it stops running when it gets to "searching for msi utilities" and does nothing.  I have updated to the 3.34 version, no pop-up blockers, etc...
    any ideas why it's doing this now?

    You might want to try and uninstal it then reinstal it, and if that does not do it, then more than likely their service is temporarly down, Has happened to me a time or two and more often than not it is the site to blame.

  • M510C Megabook Bios and Live Update

    Where can I obtain Latest Bios and Drivers for M510C Laptop
    Flashed Bios with latest from live update but it went backwards to older version Bios
    Was 2.30 Now 1.40(beta) (thought it was typo has happened with other MSI Live update files before) {Thats my excuse}
    Now Live Updates shows bios optimised  
    Also all the driver files live update 3 (Ver3.61) finds are old and web links for drivers are old and no bios image to download
    Had to use ATI drivers for newer Megabook 610
    Also had to download Intel inf and wireless g update version from intels site
    PC Alert4 Preloaded version show CPU Temp and System Temp
    Now Manualy updated PC Alert4 it only shows CPU Temp
    Overall Very Happy with Megabook Quality and performance (just fine tuning of software/drivers needed)
    Would like live update to show updated drivers and Bios images
    Also would be nice to have graphical picture report of battery conditon like it shows of promotional Sheet
    Thanks MSI
    One last thing a forum just for notebooks and maybe socket 775 boards

    MSI have sent me an Email (I did send them one)
    Which fixed the BIOS Issue and is now available. Also are working on other live update drivers file
    THANK YOU MSI
    for your
    GREAT SERVICE/SUPPORT

  • Need to Create a Live Update Smart Playlist That Shuts Off After a While

    Hi All--
    I'm trying to create a smart playlist with the following properties:
    1) Every time I play it, it selects a different random set of songs.
    2) The playlist plays for a fixed duration, then shuts off.  (I like to go to sleep to music, but it wakes me up in the middle of the night if it plays for too long.)
    The best I've been able to come up with is to set "not played in the last xx days", "Limit to yy minutes selected by random", and "live updating".  However, there's a problem with this:  as soon as one song has played, it's purged from the list, which causes live updating to replace it with a new song.  As a result, this creates a list that plays forever, since new songs are continuously added to replace the ones that have been played.
    I tried turning off live updating, but then I'm stuck with the same songs over and over.  I also know about the trick of just using "select random" and deleting the contents of the list, so that live update will repopulate it, but that won't work on an iPod without doing it in iTunes and then re-syncing.
    Any ideas?

    OK, I think I finally found a way to do this, sorta.  This will work on any iPod or iPhone that supports live update and allows the creation of ad-hoc playlists, either named or on-the-go:
    1) Create the list as described above.
    2) Sync to iPod or iPhone
    3a) On a non-touch iPod, highlight the playlist and hold down the select button until you get the menu with "add to on-the-go" in it, and select that.
    3b) On an iPod touch or iPhone, create a new playlist, then select the dynamic list and "add all songs" to it.
    The playlist you created isn't dynamic, so you'll just play through it once and stop.  Deleting the contents from the temporary list and doing step 3a/b over will get you a new set of songs.  The dynamic list will purge the songs and update with new ones as you play them from the static list.
    It's not perfect, but it's reasonably fast to get a time-bounded selection of music that refreshes each time you want to play the list.

  • No more live updating?

    iTunes 11 is only updating my number of plays and 'last played' on random songs.  Has anyone else had a problem with iTunes not recording and live updating the data from music being played?  I have a smart playlist of songs that I haven't listened to this year, I want to play through them, but it's not longer recording that they have been played.  Can some one help or is this just a flaw in the 'new and improved' iTunes?

    After further research - I did find someone else post that if you turn off 'Cross-fade' option it starts to live update again!  Thanks to those other contributers!

  • Reason for msi tabs & live update not working

    Ok i had the same problems with my msi video card the msi tabs not working and live update giving me an error. I used to run a asus p4b533 board with a sis chipset> what i found out is that the live update and the tabs work under any m/b that have the intel chipset. I now have a asus board with  a intel chupset it's working fine.  I've tried this on other boards and same results.  It seems that everyone who's had the problem was not using an intel chipset board. This is my theory...
    -rak

    Just reinstall LU, and you should be fine.

  • Has Live Update EVER worked? Trying to download "AMD Chipset Drivers" 970A-G46

    I just installed W8 clean, added 8.1, all the updates, and installed Live Update fresh to see if i actually works this time around.
    I see that apparently it still is a piece of crap software.
    Never have I found this program to take less than several hours / entire day to download something that I allegedly need. It will tell me my BIOS is up to date yet when I go to the MB page and compare the version from BIOS and Live Update, there IS a newer version there (heck it is up to 2.6 and I had a v 1.0B using Windows 7). Even after flashing with USB to 2.6, LU5 is still showing my BIOS version as 1.B0.
    I just wound up manually downloading the internet, realtek audio, and usb drivers then installing them myself.
    The only file that is missing from the MB page is what Live Update is telling me as "Not Installed": MB Driver /AMD Chipset Drivers/(current version) Not Installed/(online version) 13.101.0.0
    I have been waiting at least 30 minutes downloading this file through LU5 which is only at 27%.
    Is this even needed? Is the MB page THE DEFINITIVE page for downloads and should I just uninstall LU?

    Quote from: ITPalg on 27-November-13, 09:37:01
    Well, it is an AMD based board, not Intel. Shouldn't the board manufacturer supply the drivers for their own board?
    p.s....after letting the one file download for over an hour, there is a corrupt file in it /rolls eyes...I also can't find drivers for an ATI based MB on the AMD website. The only selections for drivers are for graphics cards.
    So you didn't get a disk with your motherboard?
    Yes, MSI will provide drivers for your motherboard off of their website, or with the disk that came with your motherboard. You had mentioned the newest drivers...the newest drivers will always come from the chip manufacture...ie AMD, Intel, Nvidia, etc.
    AMD no longer has a specified chipset driver to the best of my knowledge. They have Catalyst...it pretty much takes care of everything.
    http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64

  • Ran Live Update 3 BIOS 1.2 to 1.6--Windows XP Pro Wont Start

    Earlier today I saw that there was a new version of Live Update.  I was too afraid to flash the bios manually (not that Live Update is automated, it just helps you create the flash disk) and Live Update 2 didn't work last time I tried, I thought I would give it a go.  Everything went fine, the intial boot screen shows that 1.6 was successfully installed, but when Windows went to load the safe mode option screen came up.  I selected the continue booting windows normally option, thinking this was just an effect of the BIOS flashing process and nothing to worry about.  The boot up process went as far as the XP Pro splash screen but the machine reset before the green loading Bar would do its thing.  With continued attempts the same result occurred.  Safe mode didn't work either.  It reported damaged a damaged NTFS file (which would explain why the OS couldnt load).  It also reported another file in another attempt, but I can't remember what it was.  I followed the suggestion and popped in the setup cd.  After all the setup files were loaded up it displayed the Starting Windows... dialog and I selected repair.  This brought me to a DOS screen (is that normal?) and as I am DOS illiterate I was screwed.  So I restarted to try again and then on the Starting Windows... dialog after loading the setup file off of the CD it reset instantly, just like when i first tried to start the computer.  Its as if it refuses to let windows load wether it is off of the CD or the disk.  I would GREATLY appreciate any/everyone's feedback on how to remedy this problem.  THANKS!

    When the bios is flashed, it sometimes changes the way the chipset or board layout looks to Windows. Windows HATES CHANGES OF THAT NATURE! Your crash is common to the change. Win 2K does the same thing. When you do a repair in winXP Pro, tell it to install at the screen where you FIRST saw the repair prompt. The disk may ask a few more questions like where to load to, and then scan the drive and say "searching for previously installed versions of Windows". it should find your already loaded version and ask you again if you want to repair. At this point, which should be the SECOND time it has asked you about repairing, you should say yes. The repair process is pretty much automatic from there. Just like a fresh install. You will have to load all your drivers over again, just like a fresh install. This also works when you change motherboards and want to keep all your stuff intact. Good Luck!

  • Z77A-G45 Live Update drivers different than websites (Also Intel has their own)

    (MS-7752) Z77A-G45
    Win7 64
    Why are there different drivers listed in Live Update 5 than what is listed on the website?  This is especially confusing with Management Engine driver because there are two separate drivers dated 2013-10-16 on the website in addition to Intel and Live Update having their own different driver.
    Some examples:
    MSI website:
    Intel Management Engine Driver 9.5.15.1730
    Intel Management Engine Driver 8.1.30.1349
    Realtek High Definition Audio Driver 6.0.1.7037
    Intel Smart Connect Technology Driver 4.2.40.2418
    Live Update 5:
    Intel Management Engine Driver 9.0.0.1310
    Realtek High Definition Audio Driver 6.0.1.6959
    Intel Smart Connect Technology 3.0.42.1767
    Should I just go 100% by the website (although Intel's are also different than MSI's site..)?
    Also, I'm currently on BIOS 2.9.  Should I update to 2.C0?  Is that one stable for overclocking?

    Quote from: Nichrome on 07-December-13, 19:42:57
    I suggest you uninstall Live Update ( I did so) because it f...k my drivers one day, and had to do fresh Win7 installation and even BIOS update which I didn't need before ..
    That sucks.
    I've never actually installed anything with it.  I was just curious to see which files it'd attempt to update.  I'll definitely uninstall it now though..

  • Live Update 5 Problems

    Hello folks,
    First, I have no idea whether I should post here or in the NVidia forum.
    I have a 790FX-GD70 motherboard with the 6 Core AMD processor, plus 16GB memory.
    Most everything is working perfectly except for putting to sleep (pw stays on - but I'll post a separate msg about this) and Live Update 5.0.077 doesn't seem to work properly.
    Despite downloading and updating the MB drivers (through Live Update 5), they still show up as:
    * AMD Chipset drivers - current version: 8.17.12.8562. new version: 8.881.0.0
    * JMicron JMB36X Driver - not installed
                                     (there is a new program files folder with an application called JMB36X RAID Configurer
    * Realtek HD Audio drivers - not installed (the Realtek HD Audio Manager *is* installed with audio driver version 6.0.1.6487)
    It appears as though the AMD Chipset drivers didn't install (what am I looking for to confirm this?) and the later two drivers *did* in fact, install.
    Can anyone explain why Live Update is not showing the correct installed drivers and/or will not install the AMD chipset drivers.

    Uninstall LiveUpdate 5 and forget about it. You can always download drivers from your boards download page:
    http://eu.msi.com/product/mb/790FX-GD70.html#/?div=Driver&os=All
    Quote
    I have no idea whether I should post here or in the NVidia forum.
    Your board uses an AMD chipset, so you've posted in the correct place.

  • How to update VGA bios in MSI live update.

    Hi,
    I downloaded MSI live update and i saw that there is a new bios for my card and i downloaded it.
    when i go to the folder with the DL-FILE i see that different things are downloaded included nvflash and the rom itself.
    Now is my question, can i install the new bios though the MSIsetup in that folder or do i have to do it a different way? I just want to be sure because i don't want to do anything wrong and probably brick my card.
    Thnx in advance.

    I just flashed the new vbios via MSI live update yesterday, but I have GTX 970, not sure if the procedure is the same or not between different cards.
    I just pressed the "download and install" arrow on the right side of vbios size, and live update only allowing me to choose vbios update at one time. After the download finished, it auto executed cmd under windows, and remind me to remove graphics card driver and continue (I did uninstall when I flashing my first card, but for the next one I just closed the nvidia experience), after press twice "Y" in the cmd, the flash began and then system just auto restarted. When my pc rebooted to windows again, I checked the vbios version, it appears the new one.
    maybe i should film a video if i got chance 

Maybe you are looking for