Ti4800SE-VTD. Direct3D, memory and IRQ problem

Hello,
I have a dual boot pc (Windows ME and XP). Direct3D on ME does not work, but it does work on XP. I test it with dxdiag, using button Test Direct3D and after a flash there is the error: "Direct3D test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x887602eb (error code)"
On startup of dxdiag there is another error saying: "... not enough memory...". The tab Display shows no information on Chip and DAC, and approx. total memory is 1.0Mb.
Using System Information of Windows I see a lot of differences between ME and XP regarding IRQ (10 resp. 16) and memory addresses.
I installed DirectX and the video driver for both Windows using the cdrom that came with the video card.
My idea is that the IRQ is not good, but I don't know how to correct it. Maybe there is something else going on. I don't know what to do anymore.
Can anyone help me out?
Regards

Thanks for the reply.
What kind of specs do you need?
I installed directx8.1b and 9.0. Both have the same problems.
Motherboard is MSI 845PE Max2-BFIR.
I can't find any bios settings regarding video.
So, I wonder on what basis XP and ME decide to use certain video settings like IRQ and memory. XP defines IRQ 16 and only 1 other periphial uses this IRQ as well. ME defines IRQ 10 for the video card and about 5 other periphials use this IRQ as well. And I think this causes the problem.

Similar Messages

  • Plugin Containers hogging memory and Adobe problems

    Hi,
    I have regular problems with Firefox on my notebook. Firefox memory usage shoots beyond 500MB of memory and becomes extremely slow in any of the below conditions:
    1) There are updates ready for some plugins: I thought it might be because I had enabled automatic updates and had made it manual. Still the same trend continues.
    2) I run any Adobe application on the browser, like open a pdf from a website, run flash video either from Youtube or any other website.
    3) I open about or more than 10 tabs on a single session (typical while reading news articles from feeds)
    It was very problematic with FF4, but I continue to see the same trend even with version 5. When this happens, I do not have any other option but to close all the sessions of the browser and restart. Sometimes, Firefox does not go away from memory and I have to manually kill the process from task manager. There are several instances when the processor heated up so much, the fan could not handle and the notebook shutdown automatically. This happened when I had run youtube videos and after the video ended, let the browser window open for long time.
    Here is the config information of my notebook:
    Toshiba Portege M900, Intel Core i5 2.4Ghz quad core, Win7, virus free, with latest CA enterprise AV running.

    Additional info:
    The 256-color problem depends on how ActiveX'ed beans are integrated into native (VB, C++) apps.
    If the development computer is configured to 256 colors, then on the runtime with 256 colors, the colors are ok.
    If the development computer is configured to 16-bit colors, then on the runtime with 256 colors, the colors are wrong (dithered, ugly, wrong).
    This tells me that the process where the ActiveX'ed bean is serialized to the C++ application resource file, some palette information must have been serialized out as well.
    Question: what possibility is there to tell the ActiveX'ed bean or beans.ocx that it should update its palette?
    A windows message? To whom, the ActiveX'ed bean, some component of it (HWND?), beans.ocx or some component of it? Sth that can be done within the bean's code?
    Cross-posted to the plugin forum.
    Sylvia

  • [VIA Series] memory and usb problems

    Hello...... I have the MSI PM8M-V motherboard, intel celeron 2.93 ghz processor and 256 meg kingston ram. I am upgrading about 50 pcs with this setup. On some, the system will not see any of the USB ports and on almost all of them, the system reports that I have 192 meg of ram instead of the 256. Is this a normal thing with the memory and has anyone else had the problem with the USB ports. Thanks

    Quote from: Maesus on 20-December-05, 15:37:44
    part of the RAM is taken by the video. That's why you only see 192MB instead of 256MB (64MB is taken by Video).
    USB ports? make sure you enable them in the BIOS.
    Make sure you have the Chipset Driver updated for the USB problem.
    You might also check how you have the Front panel USB’s hooked up to the header on the Mobo. Make sure it is correct. 

  • X58 Pro-E - Added memory and having problems.

    Good evening. 
    My original setup was:
    MSI X58 Pro-E, running V8.14 BIOS (think it's listed as 8.E on MSI site)
    i7 920
    6GB (3x2GB) of A-Data DDR3 1333 (Part number HY63I1B16)
    eVGA GTX  285
    Win 7 64bit Ultimate
    I tried to find the exact brand/model of memory to add, but was unable.  I ended up buying this: http://www.newegg.com/Product/Product.aspx?Item=N82E16820211451
    I installed the memory and BIOS saw it all.  Windows started up fine, reports 12GB, but the 2nd night after installing the memory, I got a bluescreen.  I went ahead and ran memtest86, which reported several errors. 
    I took quick pic of memtest86 showing several errors here:
    Before I RMA the memory, I wanted to make sure it isn't a configuration issue, rather than just bad memory.
    Here's a pic of the memory tab from CPU-Z:
    SPD tab (slot #1 "old" memory):
    SPD tab (slot #2 "new" memory):
    And here's a pic from SIW's memory tab:
    What do you think?  Bad memory or configuration issue?  Thanks for your time.

    The mixed config is not ideal. You may want to try however to set it all manually in the BIOS and see if you are able to get it to work.
    Disable XMP in the BIOS.
    Set your mem ratio so that your mem speed is at 1066. Set your timings manually to 9.9.9.25 or 8.8.8.22 and test.

  • N95: Memory and AP problems

    Hello,
    I have the 11.0.026 firmware in the US but I have found some strange problems:
    Often, I get the message "Memory Full - Close some applications". I have only Web browser running but I still frequently get that message. (When I have several applications running, they often just crash). Is the any way of finding out available memory?
    Not sure if I need to do some sort of hard reset after some application crashes. Anyway, I find it disturbing that N95 runs out of memory with only browser running. I would like to keep browser, maps and email client running at the same time.
    Any idea why memory is full and is this normal?
    Also, when I reboot the phone, the phone asks my access point. Why is that? I haven't started any applications yet. In general, AP selection does not work properly (e.g I select WLAN AP and the application has to ask it again every 5 seconds..If I then select packet data AP same thing. Maybe the email client is just broken).
    Finally, is there any way of shutting down (disabling) WLAN or GPS (in order to save batteries)

    Yes, you can stop the WLAN from Settings-> Connections-> WLAN and choose Never. The GPS does not eat up the battery if not connected, you can increas your battery life by choosing a GSM connection over a UMTS or dual mode. There were some threads about battery life on the N95 try the search discussions with key words N95 and battery. Good luck.
    I have something in MY Pocket- the N95!!!

  • Memory and messaging problems

    alright, ive had a incredible 2 for under a year it has the basic 500 or so mb of space on it, plus an additional 4 gb on an sd card. only about 1/4 of either is taken up by anything and it constantly tells me there is low storage to the point where it forces programs closes. and also recently text messages have stopped receiving and i can only send. is there a reason for this?

    Chef_esten,
    I apologize that you are having issues with your device. Thank you to the community for responding. I would be more then willing to help. When you started getting the low storage error did you clear your application memory cache? I would go into some of your apps like messaging or Facebook and clear your data and cache. What applications are you using when you get the "force close" error? Have you recently added applications? Regarding your issue about receiving text messages are you using a 3rd party application? If so, have you tried to uninstall and reinstall it?
    To verify if it is a hardware or software issue I would suggest doing a master reset on the device. Here are the steps to do so:
    From the home screen, touch Menu 
    Touch Settings  
    Touch SD & phone storage 
    Touch Factory data reset 
    Tap Reset phone 
    Tap Erase everything 
    Device will begin to reset
    If you do the master reset and you are still having issues then it could be the hardware. At that point we would have a conversation about replacement options.
    Please answer these questions and perform the suggested measures.
    I am certain that your issue will be resolved.
    Thank You,
      SammuelP_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • FCP X render  hangs memory and cash problem

    Background render stuck at 0% memory/cache file full on start up disk error message. Activity monitor indicates that there is little to no memery available. entire system is sluggish. HELP

    Mac Pro 2X2.66 GHz 6-Core Intel Xeon
    6 GB 1333 MHz DDR3
    OSX 10.7.4
    Macintosh HD 639 GB Free out of 999 GB
    SATA 2 HD 830 GB free out of 2TB
    LaCie External 2TB 381 GB available connected through FW 800
    Does that help?

  • IRQ problems with 865PE Neo2V and MSI NX6600-VTD256 VGA

    Hi All,
    I thought I would try a posting here first for help before filling out the cumbersome service request form. I recently purchased the 865PE Neo2V motherboard with an intel 3.2Ghz processor, 1 Twinmos 1024MB DDr400 memory, 2 Maxtor Diamond 250GB S-ATA HDD's and the MSI NX6600 VTD 256  AGP VGA card. I am also running a Plextor 716a dvd burner and a Toshiba DVD Rom on the secondary IDE slot nothing on the primary for 2 S-ATA drives and 2 P-ATA for a total of 4.  I have always had a very good experience with MSI products in the past, easy to install and for the most part problem free. That is until now. I am having a rough time with the VGA card and IRQ conflicts. In the past with all my MSI motherboards I was able to choose ( Reserve IRQ for VGA) Not so with the 865PE NEO 2V.( Unless I am missing something and doing it wrong) To make a long story short the MSI NX 6600 (NVIDIA GeForce 6600) VGA card is sharing IRQ 16 with Intel(R) 82801EB USB Universal Host Controller - 24D2 and Intel(R) 82801EB USB Universal Host Controller - 24DE. For the most part the system runs OK except every so often during startup the system loses the VGA Card and tries to reinstall the card and software. After reinstalling the software the first time it happened I subsequently tried choosing Cancel on the prompt to install and simply reboot the computer. To my surprise the system always seems to see the VGA card on the second boot! and works fine. I have been running the system for two days now with the USB disabled in the bios which gives the VGA card IRQ 16 by itself,  so far the system has seen the VGA card each and every startup without problems. Since the USB and AGP are fixed I am unable to move anything. Unfortunately I need the USB for my printer and scanner. I would also like to add that I have the latest BIOS upgrade for the Motherboard and the latest MSI Drivers for the VGA card.
    Any suggestions on how to get the VGA card on its own IRQ?
    Thanks for any input
    Mike
    Edited to add that For an OS I have WinXP Pro service pack2

    Quote
    or rather, the poorly installed drivers.
    Frankenputer
    I take umbrage with your statement. I installed the latest drivers from MSI correctly! I also chose not to install the very latest as they are a Beta version with the warning they may be unstable!  Perhaps I was under the misguided impression that I would be better off with the latest drivers offered by MSI for the particular VGA card I paid my good money for! ( this is the main reason I thought the problem was not driver related!) It is not my fault that MSI dropped the ball in its offerings to its valued customers!
    Just because I was being polite to Hans who offered so much good advice and showed such a genuine concern for my troubles doesn't mean I had not read the advice from Nvidia on how to uninstall and reinstall "their" drivers! I will admit though that from my read on Nvidias suggestions they did not go as far as to recommend uninstalling the norton works completely, only disabling it!
    On another note My computer seems to be starting so far without the problem!  On yet another note after installing Nvidias driver package Version: 91.31 You get a warning every time you start up that the SLI is disabled. (unless your sli equipped) I found a fix for it and have it stored on my web space if anyone wants it. It is a zip file and I guarantee that I've scanned it with Norton and it is virus free. After unzipping it and clicking on it it makes an entry into the system registry removing the warning.
    It is here:  http://home.casema.nl/mdybus/FixSLIBug.zip
    Modified to add:
    I just checked my email and have a reply from the service department. Here is what they said:
    Quote
    Dear customer,
    The latest BIOS can be installed using Live Update:
    http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind
    =1
    The latest driver for the VGA can be found on www.nvidia.com. We (and
    other VGA vendors) do not make our own drivers, nVidia (and ATI) make
    the drivers. So at the website from nVidia the latest drivers can be
    found.
    Best Regards,

  • Problem with Photoshop CS5. Memory and Harddisk spaces

    Just got CS5 Master Suite. Whenever I open photoshop it takes a ton of memory 1 gig +. When I open files it takes up more and more until it takes up all my memory and hard disk space. I open a simple multi layered file that is 25 megs in size to work on it. Before I know it photoshop is taking 20gigs+ of my hard disk space along with 3+ gigs of system memory. Is there a memory problem in photoshop cs5?
    Thanks!
    Joseph

    So I just opened the 25 meg file in photoshop cs5 and watched my free space on my hard drive go down 8 gigs the instant I opened it. It went from 27 gigs of freespace to 19 instantly.
    I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
    anyone else having simular problems?

  • Problem with Photoshop CS5. Memory and Hard disk space Mac OSX

    Just got CS5 Master Suite.  Whenever I open photoshop it takes a ton of memory 1 gig +. When I open  files it takes up more and more until it takes up all my memory and hard  disk space. I open a simple multi layered file that is 25 megs in size  to work on it. Before I know it photoshop is taking 20gigs+ of my hard  disk space along with 3+ gigs of system memory. Is there a memory  problem in photoshop cs5?
    Thanks!
    Joseph
    UPDATE:
    So I just opened the 25 meg file  in photoshop cs5 and watched my free space on my hard drive go down 8  gigs the instant I opened it. It went from 27 gigs of freespace to 19  instantly. As I open more files and close others it works till my harddrive goes to zero space... stalls the computer big time. Only way to correct it is to quit photoshop cs5 and wait a few minutes for the space to return... and it takes a few minutes for it all to return.
    I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
    anyone else having simular problems?

    http://forums.adobe.com/thread/681490?tstart=0
    Maybe this thread offers some information.
    And have you perused this page?
    http://kb2.adobe.com/cps/404/kb404440.html

  • Problem with out of memory and reservation of memory

    Hi,
    we are running a very simple java program on HP-UX that do some text substitution - replacing special characters with other characters.
    The files that are converted are sometimes very large, and now we have come to a point where the java server doing the work crashes with "Out of memory" message. (no stack) when it process one single 500MB large file.
    I have encountered this error before(with smaller files) and then I have made the maximum Heap larger, but now when I try to set it to 4000M
    i get the message:
    "Error occurred during initialization of VM
    Could not reserve enough space for old generation heap"
    When it crash with this message, my settings are:
    -XX:NewSize=500m -XX:MaxNewSize=1000m -XX:SurvivorRatio=
    8 -Xms1000m -Xmx4000m
    If I run with Xmx3000m instead the java program starts but I get Out of memory error like:
    java.lang.OutOfMemoryError
    <<no stack trace available>>
    The GC log file created when it crashes looks like:
    <GC: -1 31.547669 1 218103808 32 219735744 0 419430400 0 945040 52428800 0 109051904 524288000 877008 877008 1048576 0.934021
    >
    <GC: -1 62.579563 2 436207616 32 218103808 0 419430400 945040 944592 52428800 109051904 327155712 524288000 877008 877008 1048
    576 2.517598 >
    <GC: 1 65.097909 1 436207616 32 0 0 419430400 944592 0 52428800 327155712 219048400 524288000 877008 877008 1048576 2.061976 >
    <GC: 1 67.160178 2 436207616 32 0 0 419430400 0 0 52428800 219048400 219048400 524288000 877008 877008 1048576 0.041408 >
    <GC: -1 128.133097 3 872415232 32 0 0 419430400 0 0 52428800 655256016 655256016 960495616 877008 877008 1048576 0.029950 >
    <GC: 1 128.163584 3 872415232 32 0 0 419430400 0 0 52428800 655256016 437152208 960495616 877008 877008 1048576 3.971305 >
    <GC: 1 132.135106 4 872415232 32 0 0 419430400 0 0 52428800 437152208 437152208 960495616 877008 876656 1048576 0.064635 >
    <GC: -1 256.378152 4 1744830464 32 0 0 419430400 0 0 52428800 1309567440 1309567440 1832910848 876656 876656 1048576 0.058970
    >
    <GC: 1 256.437652 5 1744830464 32 0 0 733282304 0 0 91619328 1309567440 873359824 1832910848 876656 876656 1048576 8.255321 >
    <GC: 1 264.693275 6 1744830464 32 0 0 733282304 0 0 91619328 873359824 873359824 1832910848 876656 876656 1048576 0.103764 >
    We are running:
    java version "1.3.1.02"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1.02-011206-02:17)
    Java HotSpot(TM) Server VM (build 1.3.1 1.3.1.02-JPSE_1.3.1.02_20011206 PA2.0, mixed mode)
    We have 132GB of physical memory and a lot of not used Swap space, so I cant imagine we have a problem with that.
    Can anyone please suggest what to do proceed troubleshooting or to change some settings? I'm not into this Java really so I really need some help.
    Usually the java program handles thousands of smaller files (around 500 KB - 1 MB sized files).
    Thanks!

    You have a one to one mapping? Where one character is replaced with another?
    And all you do is read the file, replace and then write?
    Then there is no reason to have the entire file in memory.
    Other than that you need to determine if the VM (which is not a Sun VM) has an upper memory bound. That would be the limit that the VM will not go beyond regardless of memory in the system.
    We have 132GB of physical memory and a lot of not used Swap spaceOne would wonder why you have swap space at all.

  • I've just purchased a new 2014 15" MacBookPro to replace my much missed 17" MBP. I got the works: OS 10.9.4, 2.8GHz Intel i7, 16GB memory and a 1 TB SSD, but despite the expense, I still don't have a computer that works...  The problem is that every

    I've just purchased a new 2014 15" MacBookPro to replace my much missed 17" MBP. I got the works: OS 10.9.4, 2.8GHz Intel i7, 16GB memory and a 1 TB SSD, but despite the expense, I still don't have a computer that works...
    The problem is that every time I try to open any program from Office 2011, I immediately get the following window, for example for Word: "Microsoft Word has encountered a problem and needs to close. We are sorry for the inconvenience." This happens each and every time I try to open Word or other Office 2011 component.
    Thinking it might be a licensing issue, I purchased and downloaded a new copy of Office 2011 from Amazon and installed it on my new MBP. Same issue once again.
    I tried to remove all copies of Office 2011 from the MBP, but the instructions provided by Microsoft required about three page and seventeen steps and the page was somehow corrupted and would not print in its entirety, nor would it e-mail as anything other than a link to the corrupted page. Not trusting my memory, I decided not to try this without adult supervision.
    I used Disk Utility to repair Disk Permissions, as described on an existing thread regarding the same problem, but to no avail.
    I removed and later replaced the "Microsoft User Data" folder from the Documents folder, but that was no help.
    I have copied the short version of the "Microsoft Error Reporting log version: 2.0," below, for those of you with a deeper knowledge of the internal workings, or non-workings of things Mac when crossed with things MS.
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2014-08-28 03:31:31 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.4.3.140616
    Crashed Module Name: CoreFoundation
    Crashed Module Version: 855.17
    Crashed Module Offset: 0x00018442
    Blame Module Name: MicrosoftOleo
    Blame Module Version: 14.4.3.140616
    Blame Module Offset: 0x000017f3
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0
    Surely others have encountered and solved this same problem, and I'm hoping they can help me do the same. I don't know if this is a known issue or simply a matter of my having bumbled naively through a process far more complex than I was led to believe.

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • FCP X freezes and must force quit?  I have a FCP installed on a Mac Mini (4 gig memory) and Lion OS.  The import files are large ACVHD files from a Canon G10 camera.  FCPX freezes and requires a force quit.  Is anyone else having these problems?

    I am using FCP X on both a MacMini (10.7 with 4 Gig memory) and an iMac (10.6 with 4 gig memory).  The files are ACVHD files imported from a Canon G10 camcorder.  FCP is constantly freezing and requiring a forced quit.    Could it be that FCP X was not tested thoroughly for use on a Mac Mini? 

    I think it's safe to say that FCPX wasn't tested throroughly for use on anything.
    with that out of the way, there are many variables as to what might cause your problems, but I don't think it's the mac mini as long as it meets the specified minimum requirements (especially the graphics card).
    You might try creating a camera archive first and then importing from that.
    The other issue might be the file format itself; you might need to use Clipwrap first. Maybe someone who has the same camera can chime in.

  • SHARED MEMORY AND DATABASE MEMORY giving problem.

    Hello Friends,
    I am facing problem with EXPORT MEMORY and IMPORT MEMORY.
    I have developed one program which will EXPORT the internal table and some variables to the memory.This program will call another program via background job. IMPORT memory used in another program to get the first program data.
    This IMPORT command is working perfect in foreground. But  it is not working in background.
    So, I have reviewed couple of forums and I tried both SHARED MEMORY AND DATABASE MEMORY.  But no use. Still background is giving problem.
    When I remove VIA JOB  parameter in the SUBMIT statement it is working. But i need to execute this program in background via background job. Please help me . what should I do?
    pls find the below code of mine.
    option1
    EXPORT TAB = ITAB
           TO DATABASE indx(Z1)
                FROM   w_indx
                CLIENT sy-mandt
                ID     'XYZ'.
    option2
    EXPORT ITAB   FROM ITAB
      TO SHARED MEMORY indx(Z1)
      FROM w_indx
      CLIENT sy-mandt
      ID 'XYZ'.
       SUBMIT   ZPROG2   TO SAP-SPOOL
                      SPOOL PARAMETERS print_parameters
                       WITHOUT SPOOL DYNPRO
          *_VIA JOB name NUMBER number*_
                       AND RETURN.
    ===
    Hope every bidy understood the problem.
    my sincere request is ... pls post only relavent answer. do not post dummy answer for points.
    Thanks
    Raghu

    Hi.
    You can not exchange data between your programs using ABAP memory, because this memory is shared between objects within the same internal session.
    When you call your report using VIA JOB, a new session is created.
    Instead of using EXPORT and IMPORT to memory, put both programs into the same Function Group, and use global data objects of the _TOP include to exchange data.
    Another option, is to use SPA/GPA parameters (SET PARAMETER ID / GET PARAMETER ID), because SAP memory it is available between all open sessions. Of course, it depends on wich type of data you want to export.
    Hope it was helpful,
    Kind regards.
    F.S.A.

  • Problem actually viewing files in phone memory and...

    When I browse the phone memory and the memory card using the file manager a lot of the files show empty but I know there are things in them.  I also copied the memory card to my computer and looked and have the same problem...even after selecting to view hidden files as well.  The folders just show empty.
    Also...my contacts are set to be saved in phone memory...yet I cannot find a "contacts" folder anywhere in phone memory.  The memory card has a "contacts" folder but it appears empty when viewing it.
    Any ideas?
    Solved!
    Go to Solution.

    The Nokia File Manager gives access to just a fraction of the phone memory, and several directories on both the phone and the memory card are write-protected and also typically read- and view-protected.  (The workaround for the card is to put the phone in Mass Storage mode, or to use an external card reader.)  But in my experience, there really are lots of empty directories!  I figure it's a side effect of Symbian's 10+ year history.  If you really want to see what's on your phone, install a third party file browser like Y-Browser (http://www.drjukka.com/YBrowser.html , scroll down to the bottom) or X-Plore (http://www.lonelycatgames.com/?app=download ).  Even better, install Mobile Guard (http://www.netqin.com/en/guard/symbian/ ) for read access to protected directories like C:\Private and C:\Sys.  (Mobile Guard is a suite of programs, some of which may run automatically like a download manager...so don't be alarmed by the pop-ups.  You can turn most of them off.)
    Your contacts are stored somewhere in C:\Private, as well as email, SMS messages, etc.  That's why you can't find them.  This is the nature of Symbian's "System Security" feature.  Hope that helps!

Maybe you are looking for