Tibook useful in 2014

Advice would be greatly appreciated on the following;
Recently I rediscovered my old Tibook in storage and as it booted up, and contains a myriad of software albeit dated - Reason, Quark, Indesign, Premier etc.
I was considering giving this to my 11yr old niece as I remember this machine and software helped me a lot in my teenage years, and was hoping that she could possibly gain some understanding of the software etc. as she is entering secondary school this Sept.
It is a G4 15" 1GHz model running OS X 10.3.9
However there are several issues with it regarding;
It is my understanding that I can up date the OS to Leopard 10.5.8
Is there any issues with such an update and will this enable me to connect to the internet. As I can connect it to my home wifi network which is a BT Hub 5, nevertheless I cannot connect to the internet using IE 5.2 or Safari 1.3.1? What is the latest browser I can run?
Can I also update the airport card to later than current 802.11b ?
Also it asks me to update the time and date settings when boot up is complete. Is this an internal battery problem?
The lithium-ion battery is fine but the charging cord has had it on the connection and has to be adjusted to enable the light to come on at the port. What is part availability like for such? Also requires a new base and the outer surround which houses the latch and superdrive slot needs replacing? How difficult is it to obtain these parts and replace DIY mode?
Basically is it worth restoring for her or scrapping it, just a shame as other than the above it works fine. Thanks for the assistance guys

Can I also update the airport card to later than current 802.11b ?
Not Apple's own, but you can get a PCMCIA 802.11g card that will fit in.  FInding one with the correct drivers may be a challenge.  A WiFi ethernet bridge device with 802.11g is much more feasible since it requires no drivers.
Upgrading to 10.5.8, if you can find the right discs will disable Classic, but not Mac OS 9 booting if it was available:
Mac models capable of dual-booting into 10.5 and Mac OS 9
It also will give you access to a better Tenfourfox and Adobe Flash:
Java and Flash & Mac OS X 10.5
Getting the proper cable may be hard, buy you can check my FAQ* for some sources:
http://www.macmaps.com/frayguide.html
* Links to my pages may give me compensation.

Similar Messages

  • Trial version of Illustrator CC 2014 takes over my CS6 old version and forces me to use CC 2014 on launch. How to fix?

    Trial version of Illustrator CC 2014 takes over my CS6 old version and forces me to use CC 2014 on launch. How to fix? FIle> get info>won't let me choose >Open this file with CS6. Forces me to use CC 2014 Illustrator which I don't want because I am doing client work in CS6 that I own and I do not have time to try out the CC version.
    I also do not like the black interface in illustrator as I cannot even see the layer icon at the bottom. I won't want to buy it if this is all that's offered.

    You can change the UI brightness in the prefs. Otherwise I'm not clear what your issue is. Handling file associations are operating system basics and you can look them up on a simple web search and from drag&drop onto the launchpad/ dock icon for CS6 to opening the files directly from within AI there sure are enough alternatives, don't you think?
    Mylenium

  • I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

    I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

    Hi,
    Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    Thanks,
    Rameez

  • Cannot view Master Data Services Models with Excel Add-In, using MSSQServer 2014 Trial and Excel 2010 (non-trial)

    I'm using using MSSQServer 2014 Trial with Master Data Services installed. I have connected to the MDS server with the Excel 2010 MDS Add-In. 
    Models are not listed in the Add-In's Explorer browser. When I open the MDS server with IE, no models are listed either.
    I can view them locally on the server in IE.
    There are no remote DB access issues.
    Is it just that the 2014 Trial version does not supply this info remotely??

    Was a Model Permission issue. Fixed here: http://technet.microsoft.com/en-us/library/ff487055.aspx
    Would be good if the interface would show some kind of alert to that fact.

  • I have been getting the wierdest, most ridiculous issues using PP 2014 here is a list:

    i have been getting the wierdest, most ridiculous issues using PP , 2014 here is a list:
    unsyncing single-source a/v when aplying effects.
    exporting the resynced clip to an even more out-of-sync clip
    freeze frame. when applying stabilizer, clip will just stall on a frame whereas before the effect, it didn't
    losing 2-3 hours of work due to auto-save failure. quitting premiere like normal but still having to force quit
    ramdom green frames that just suddenly appear
    constant crashing
    crashing without auto saving
    severe artifacting
    timeline, source, project thumbnails won't play
    toggle to previous/next edit point won't work
    significant, work-hidering issues in 90% of my project that collegues have never heard of
    pefferences will suddenly change. auto-save set to every 5 minutes and 100 versions will reset to default and audio scrubbing has just turned off
    no video, sound only during playback. freeze framing during playback
    pasting an item other than what was copied. copied a mask, pasted and mask of diferent size and shape
    inserting single frames between clips that i didn't add
    mixing unused video during transitions
    mixing unused video into masks.
    the above image is a mask that is being distorted by the image on the left below but it is only occuring in the mask.
    media pending sceen remains long after all content is loaded
    artifacting in the form of green pixel fields after exporting
    these issues are seriously hindering my ability to work. failed solutions i have run thru are:
    closing and reopening PP
    deleting render files and re-rendering
    replacing the distored clip with a  fresh clip
    rebuilding the mask
    restarting my computer
    PRAM and smc resets
    uninstalling and re-installing PP
    what is going on???

    Hi DV,
    Sorry you are having issues. FWIW, I also run a Mac and do not have these issues - however, I am still running OS X 10.8.5 on my personal machine.
    First of all, we need a lot more info: FAQ: What information should I provide when asking a question on this forum?
    deadvessel wrote:
    i have been getting the wierdest, most ridiculous issues using PP , 2014
    You say you are using "PP 2014," however, that is not precise enough. Which version of Premiere Pro CC 2014 are you using? 8.0.1, 8.1, or 8.2? Choose Premiere Pro > About Premiere Pro and look at the bottom of the dialog box. That will give you a precise version number.
    deadvessel wrote:
    Here is a list:
    Indeed, that's quite a list. My first suggestion is that you check out this article and perform the fixes there, if necessary: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later) Are all the permissions set correctly?
    The other issue I see a lot is needlessly updating a project file in the middle of a project. The advice here is to avoid updating a project file to a new version of Premiere Pro as you work on it. Update before a new project is created.
    Try a test: update to Premiere Pro CC 2014.2 (8.2) and create a brand new project. Does it work better now?
    Thanks,
    Kevin

  • I am using PP 2014 to edit AVC-Intra 100M 1080i50 and the audio keeps dropping out

    the audio comes back as soon as I stop and start the timeline.
    HP Z600
    W7 Ultimate

    Hi DV,
    Sorry you are having issues. FWIW, I also run a Mac and do not have these issues - however, I am still running OS X 10.8.5 on my personal machine.
    First of all, we need a lot more info: FAQ: What information should I provide when asking a question on this forum?
    deadvessel wrote:
    i have been getting the wierdest, most ridiculous issues using PP , 2014
    You say you are using "PP 2014," however, that is not precise enough. Which version of Premiere Pro CC 2014 are you using? 8.0.1, 8.1, or 8.2? Choose Premiere Pro > About Premiere Pro and look at the bottom of the dialog box. That will give you a precise version number.
    deadvessel wrote:
    Here is a list:
    Indeed, that's quite a list. My first suggestion is that you check out this article and perform the fixes there, if necessary: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later) Are all the permissions set correctly?
    The other issue I see a lot is needlessly updating a project file in the middle of a project. The advice here is to avoid updating a project file to a new version of Premiere Pro as you work on it. Update before a new project is created.
    Try a test: update to Premiere Pro CC 2014.2 (8.2) and create a brand new project. Does it work better now?
    Thanks,
    Kevin

  • .indd file does not open using InDesign 2014

    Hello All,
    I am getting the following message when attempting to open an   .indd file :-
    " Cannot open the file "abc.indd". Adobe InDesign may not support the file format,
    a plug-in that supports the file format may be missing, or the file may be open in another application. "
    I am using InDesign 2014 trial version. I have also used InDesign CC  (ver 9.22) to open the file but got the same message.
    How can I resolve this issue ?
    Thanks

    Usually this message is completely accurate -- either there's a lock file in the folder left over from a previous session that was not properly deleted (.idlk), or the file isn't actually a .indd (does it have an extension?), .indt, .inx or .idml file. We see this a lot when people rename PDF files thinking all they have to do is change the extension.
    If you open the file in a plain text editor, the first few lines should tell you if it's an InDesign file...

  • SCOM 2012 R2 HA design but using SQL 2014 Standard edition

    Hi All,
    I want to deploy SCOM 2012r2 with a HA design (but have constraints!)
    Plan is two management servers with all roles to each (fresh deployment so 2012r2 RU5)
    SQL servers need to be 2014 standard edition due to licensing and cost constraints.
    Design is to be split between two datacentres that are fibre connected and sub 3ms latency
    Plan was to have a Management Server and a SQL server at each location.
    Each location has a dedicated SAN but SAN replication is not an option.
    What are my SQL options for the DB??
    AlwaysOn FCI is not preferable as it gives a single point of failure due to shared storage requirement.
    I read Database mirroring is not a supported config but this isn't Microsoft direct info just blog post, is this correct.
    Which leaves me with log shipping, is this supported and the best option??
    Would be great to get advice on what works well in the field with a contraint of having to use SQL Standard edition!
    Thanks
    James

    Hi,
    No additional licenses are needed for management servers or SQL Server technology.
    System Center 2012 R2 licensing
    http://www.microsoft.com/en-us/Licensing/product-licensing/system-center-2012-r2.aspx#tab=2
    Reference:
    SCOM 2012 R2 HA options with Server 2012 and SQL 2012
    https://gallery.technet.microsoft.com/SCOM-2012-R2-HA-options-540beb95
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error when compiling code for crio 9068 using LV 2014 SP1

    I have a project that was mostly developed in LV 2013 SP1.  I recently upgraded to LV 2014 SP1, and I can no longer compile the FPGA VI.  At first, I received an error stating that the Xilinx Vivado 2013.4 compilation tool was not installed.  I found this tool on your site, downloaded it, and installed it on my computer.  When I try to compile now, the compilation advances to a certain point, seems to hang there for a while, and then returns an error stating that toplevel_gen_propImpl.xds cannot be accessed "because it is being used by another process."  I have repeated this exact same scenario on both by desktop and my laptop.  I've attached a PDF of the error I windows I have received.
    Attachments:
    compile_error.pdf ‏114 KB

    Hi scg,
    I took a look at your file and researched a little bit about your issue, I have not been so lucky with the research since most of the doceuments are related to previous versions of the software, nevertheless it is also what makes me think that the file might be corrupted or some issue related to it so and I have found some tests that you could try:
    1. Create a new FPGA file with your code on it and compile it again.
    2. Turn off the firewall and compile again 
    3. Restart the compiler Services
    Hope you might find this information helpful!
    Regards,
    S.Jimenez

  • Cannot write anything to discs using Nero 2014 on Qosmio G50

    HI THERE,
    I am having trouble burning things to disc ?
    I have no idea why, as a few months ago i had no troubles.
    I have recently done a complete re install of my Qosmio, changing the OP from 32 bit to 64 bit.
    I have convert x to dvd but will not burn using it, and i have nero 2014 but again, i cannot burn anything .
    Would appreciate any help ......
    thank you.....

    > i went into toshiba qosmio G50 drivers downloads page and clicked on the firmware update for TEAC . and after opening the download and starting it , it tells me that there is no DV-W28S-R drive found ?????
    This firmware update has been released for
    TEAC DVD Super Multi Drive (DV-W28S-RT3, DV-W28S-RT4): Version 7.0D and
    TEAC DVD Super Multi Drive(DV-W28S-RT1): Version 7.1D
    On the driver page (under More Info) you can find details about this update:
    _+Changes+_
    +- Fixed the issue that the ODD is not recognized if the system is booted from a certain CD in SATA AHCI mode.+
    This means that this update does not fix any data writing issues! Furthermore it has been published only for DV- DV-W28S-RT1, W28S-RT3, DV-W28S-RT4 model drives.
    Back to you disk writing issue:
    Try to delete the upper and lower filter following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Details here:
    http://support.microsoft.com/kb/929461
    http://support.microsoft.com/kb/314060

  • How to use SSIS 2014 to read from Sharepoint List ?

    Hi there,
    I have designed a simple entry form for users using List in Sharepoint 2013.
    I need to use the information to merge into my datawarehouse.
    Question :
    1. How can I setup SSIS (SQL 2014) to get the source from List in Sharepoint?
    I have tried to download the script as suggested in codeplex but it seems not working with SQL 2014 as there is no SSIS toolbar displayed.
    Any help is much appreciated
    Thank you and Best Regards

    Hi SylviaO,
    The current
    SharePoint List Adapter that extracting and loading SharePoint Data in SQL Server Integration Services supports x86/x64 systems using SQL 2005 / SQL 2008 / SQL 2008 R2/ SQL 2012. It doesn’t support SQL 2014. Maybe we need wating the update.
    Besides, the
    OData Source component can also be used to read from SharePoint lists. So we can download and install the 64 bit ODataSourceForSQLServer2014-amd64.msi or 32 bit ODataSourceForSQLServer2014-x86.msi from the
    Microsoft® SQL Server® 2014 Feature Pack.
    The following blog about using the SSIS OData Source Connector to read data from SharePoint lists is for your reference:
    http://whitepages.unlimitedviz.com/2014/03/using-the-odata-source-connector-with-sharepoint-online-authentication/
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I'm using a 2014 iMac and a Win 8.1 64bit install disc with bootcamp. I created the ISO according to the instructions but when I selected it in bootcamp I got the following error "Boot Camp only supports Windows 7 or later..."

    Bootcamp rejects the ISO file made from a windows 8.1 disc with the error message "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
    How do I get past this?

    Hi Loner T
    No the ISO is just 64bit. I bought a shrink wrapped copy of 8.1 full version. It has two discs, one for 32bit and one for 64bit. I used the 64bit disc.
    I inserted it in an older iMac that has a dvd drive, and shared that across to my new iMac. I used disc utility to create a disc image following instructions I found here...
    Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
    This created an ISO file. I then went into bootcamp but when I tried to use the ISO file to create a boot USB it failed with the error above.
    Regards
    Ian

  • How to design block diagram for axi tpg and axi vdma on zedboard using vivado 2014.4 and sdk c application

    Hi,
    I am working in image processing project ,but currently i want to use tpg ip and vdma ip to write frame data in ddr3 on zedboard,please provide me vivado block design and sdk c application for that
     

    Please don't post the same thing multiple times. This one is fine:
    http://forums.xilinx.com/t5/New-Users-Forum/how-use-axi-tpg-and-axi-vdma/m-p/638588

  • Flickering using CC 2014 (GPU not available and .mp4 not an option)

    Recently, most of my projects are exporting with a strange flickering over the footage.
    The projects vary from different sizes to green screen to having color correction.
    There is no correlation between the projects that would lead me to believe that it is ONE thing within the project that is causing the issue.
    I've been trying many export settings but the one I like to use most is
    H.264
    Progressive
    Square Pixels
    Render at Max Depth
    2 Pass
    In other forums I've read that using the GPU Accelerator will help but my computer is unable to use this.
    There have also been suggestions for not using .mp4 and that is not an option for me due to the industry I am in.
    Any help would be greatly appreciated.
    Thank you!

    Have you triple-checked all your permissions?

  • Error when publishing using Muse 2014.3

    I updated Muse to 2014.3 on my pc today. I was working with a current website, which I published this week. I made a few text changes and adjusted the opacity on some elements. Now I cannot publish my website. I get this error message: "Don't know how to generate rendered data for type:type_guid" and I am told to contact the support team alerting them to the steps I took prior to the error. Then I am kicked out of the program. Upon opening Muse again, I find a recovered file. How do I fix this issue? Is there a way for me to revert back to the Muse 2014.2 version? I would like to publish these minor changes to my website.

    stuckonaneyeland In general it's more effective to start a new forum thread for the specific error message you're receiving, rather than reply to a thread that while in the same general area of publish not working, isn't related.
    Go to the Help menu and Sign Out. Quit and relaunch Muse and sign back in. Publishing should work without any errors once this is complete.

Maybe you are looking for