Tick mark and labels
Hello -
I've been doing a lot of reading and not finding some answers. Maybe someone here knows...
Does anyone know how to:
1. On a dual Y line graph, have the tick mark labels be words instead of numbers.
2. Instead of the horizonal line on the graph being solid and going all the way across the graph, just have a small tick mark right on the Y axis?
Many thanks.
David,
This is currently not an option within xMII. The only workaround would be to butt a html table cell up to it and have the orientation go vertical for the words.
Regards,
Erik
Similar Messages
-
Is there a way I can apply a vertical orientation to the x-axis labels on a chart?
David,
This is currently not an option within xMII. The only workaround would be to butt a html table cell up to it and have the orientation go vertical for the words.
Regards,
Erik -
How to display bullets, tick marks and boxes in the report body
Hi
I have to design a report in which there are certain instructions to be
printed at the bottom.
i have display this instructions in a bulleted form.
how do i do it.
Thanks
ameyaI received a complaint that this was a "please do my job" kind of question. While it could be seen as that, I think in this instance the poster is looking for hints, rather than being spoonfed a solution.
baditakishore - welcome to SCN. Please read and understand the Rules of Engagement.
matt -
How to calculate the rotation degree of tick marks
Hello Again,
Thanks to so much help that I received here, I've been able to move right along in learning how to perform my job digitally instead of with an old camera.
In my last discussion, I learned out to make the tick marks using copies and rotation. My question now is, how is the rotation calculated so A) I get the correct placement of the tick marks, especially the small ones as there are so many and B) how do I calculate the rotation degree so that I have the proper amount of space at the bottom of the guage/dial?
Here is an image to help show what I'm asking:
I know how to get the large tick marks and the small tick marks, if I were placing them evenly around the entire circle, I would know how to do that also - but since I'm placing them around only a portion of the circle (although still evenly) I'm lost. I can only figure out the space by hit and miss calculations and that is taking much too long. I would also need to know how much to rotate the entire thing by in order to get the open space at the bottom as shown.
thanks for your help!You need to use transform effects and you can get this in about 10 or so minutes.
first you need to set up the objects.
the thick lines I used effect>distort and transform>transform 20 copies angle 14
thi ones 100 copies angle 2,8
G -
Putting tick mark into check box in smartform
hi,
can any one please let me know if i can put a tick mark in the check box of the smartform.
for example: i need to select one among yes or no check box. how do i do it.
should i have to upload a graphic of the tick mark and then display or is there any provision in smartforms to do that.Hi,
Check threads like
smartform- check box
and
what r the steps to display check box in smartform
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d! -
How to create tick marks within an arched area
I need to recreate this dial and I've learned how to create evenly spaced tick marks within a circle, but this is an ellipse. Here, I attempted to draw two ellipse then used the scissors to cut them to size. Then I used the line tool and drew each of the tick marks. Then I adjusted the weights of each tick. This is not a good method because the end ticks are not meeting the ends of the ellipse perfectly, leaving a tiny bit of tick mark outside the ellipse. There must be a better way to do this. Here is what I ended up with:
But this is what I need to create:
(I only need to create the arched part with tick marks of this dial)
Any help is appreciated, but please note that I am familiar with only the very basics of illustrator, I simply don't do this type of work often enough to completely understand the software.
Thanks!!!!Jber,
And this is an attempt to give a (hopefully sufficiently) more complete description of the ellipse way, as an amendment of post #4 (overdoing silly things like this makes it difficult to remember to mention all the crucial steps that seem to hide somewhere in the fingers):
One way that results in constant thickness tick marks might be to (using Stroke>Round Cap/Join or Stroke>Projecting Cap/Miter Join or Stroke>Butt Cap and Miter Join depending on the desired end shape and length, see below, with the layer expanded in the Layers palette, and Smart Guides are your friends, telling you when you when you are in the right spots):
If you wish to have the tick marks follow an ellipse and at the same time have constant widths (two different widths), you may (see below):
0) Lock the image of the dial (shown as a grey area below), you may place it at X = 0 to facilitate symmetric building;
1) Create the thickest tick mark and move a copy to the right, then create a one step blend (Object>Blend Options>Specified Steps = 1, then Object>Blend>Make);
2) Create the thinnest tick mark and move a copy to the right, then create a five steps blend (Object>Blend Options>Specified Steps = 5, then Object>Blend>Make);
3) Either of two ways (in both cases make sure to make it as symmetrical as possible):
3a) Create the midway ellipse, adjusting the top of it to be midway between the two arcs (this is the first way I thought of and the way shown below), or
3b) Create two ellipses corresponding to the two arcs, then create a one step blend and Object>Blend>Expand to get the midway ellipse and delete the other two;
4) Drag horizontally with the Line Tool (hold Shift) to make a path between the two spots where the midway ellipse crosses the ends of the dial image (Smarts Guides say intersect), or just create a horizontal path and place it so it crosses the ellipse in the right spots (you can see the symmetry here);
5) With the horizontal path still selected Object>Path>Divide Objects Below;
6) Delete the lower superfluous part of the ellipse, then with the Direct Seletion Tool click the horizontal segment and delete it (only click delete once);
7) Select the remaining midway ellipse part and Object>Path>Offset Path, using half the height of the dial image (at the middle), you may retry until you have it right, this will recreate the top and bottom of the dial and also make ends;
8) Select the midway ellipse part and Object>Path>Add Anchor Points a few times (see below), and copy the midway ellipse, now you have two on top of each other, one for each of the blends;
9) Select one of the midway ellipses along with the thin blend from 2) (hold Shift to have them both selected) and Object>Blend>Replace Spine, this will make that ellipse part disappear;
10) Select the other midway ellipse and the thick blend from 1) (hold Shift to have them both selected) and Object>Blend>Replace Spine;
11) Hide/Delete the image dial.
Now you should have the whole dial with both sets of tick marks on top of the elliptic arch set. In 9) and 10) you may select on the Artboard or through the Layers palette (you can see what you are selecting in both places), and the order (and stacking order) in 1)/2) and 9)/10) can be changed.
If you wish to move/extend the thick tick marks upwards or both up and down, you may:
12) Select the thick ticks blend and Object>Blend>Expand, and then Select each of the thick tick marks and tick the appropriate Reference Point in the Transform palette (if you want to extend upwards use the bottom ones (Right for left, Center for centre, Left for right), if you want to extend both up and down use the Center one), then multiply the H value by the desired amount and click Ctrl/Cmd+Enter to make them a bit longer up/outwardly.
The Object>Path>Add Anchor Points in 8) is to get a even distribution of the thin tick mark blend (not necessary for the thick tick marks blend because it only has one step). -
hello i have a few problems and i hope somebody has a solution my first problem is that how can i install windows vista without using a disk drive and my second problem is that should i tick mark the option which says Install windows 7 while using boot camp please reply, Thanks,
When running Windows in a virtual environment Windows and OSx share your computer's resources such as RAM. Therefore your games can not use all your computer's resources when running.
If you install Windows natively then Windows and your games can and do use all your computer's resource such as RAM.
But as already said, older operating systems are not supported and will not run natively using Boot Camp Assistant. You must use Windows 7 if installing natively in Lion or Moubtain Lion. -
How to make price value zero when enter PO and how make allways tick mark.
Hi all,
When enter a PO thier is two fieds Elikz,Erekz all ways should be tick mark . through program are any enhancemet is their
Please let me knowHi all,
When enter a PO thier is two fieds Elikz,Erekz all ways should be tick mark . through program are any enhancemet is their
Please let me know -
Can anyone help me with this query?
I have 64x bit iTunes on my dell studio xps laptop. The problem is that most of the text is being cut off. This is not a new problem, its been like this for years. Its just that now i've realised i'm missing some valuble info. I'll provide some examples of what is happening:
"Sync with this iPhone over..."
"Sync only ticked songs and vi..."
"Manually manage music and..."
I'm guessing its one of those fiddly resolution problems? The strange thing is, its not like i have run out off room on the screen? So i don't understand why its cutting text off? There is LOADS of space left? Can anyone help with this?
Thank you in advance,Have you selected a larger than standard font size in display preferences?
tt2 -
Graph control right-hand Y-axis tick marks look like negative signs
Hi,
The graph control right-hand Y-axis tick marks just to the left of the numeric values that make up the scale look like negative signs. It gets confusing for the user of the software.
The left Y-axis is OK because the little tick marks are to the right of the number.
Any ideas on how to improve this situation?
Thanks,
Kirk Mitchell
Project Engineer
KollmorgenPerry,
First of all thanks for looking at this.
The tick-marks controlled by the "Mark Origin" option are not the tick marks that are causing the problem.
The Mark Origin ticks are in the body of the graph along the x=0 and y=0 lines. They only show up if those lines are visible such as if you have a graph with an x axis range of -100 to +100 and a y axis range of the same.
The ticks I'm referring to are just to the left of the numeric values that label the right axis.
Below is a screenshot to illustrate:
Any other ideas?
Thanks,
Kirk -
Obtaining grid lines for every tick mark in a chart
I would like to create a chart that contains gridlines for each tick mark. Furthermore, I'd like to keep the notion of major tick marks being longer and being the only labeled tick marks. It seems that the XYChart is only placing gridlines for major tick marks. Pouring over the API doc, I cannot find a way to make it draw gridlines for the minor tick marks.
Is this possible out of the box?
If not, what is the correct solution? A subclass of ValueAxis?
Thanks,
KarlParu told me that it is not possible and to file a bug.
http://javafx-jira.kenai.com/browse/RT-17285
Karl -
Tick mark in Appleworks documents
Does anyone know how to put a tick mark into either a word processing document or a spread sheet box? I might be being dim here, but I can't find a tcik sign anywhere! (I mean like when you tick a box!)
ThanksIn addition to the option-v to produce a check mark (or a root sign) (√), AppleWorks does provide a 'live' checkbox as a paragraph label (a bullet is a 'paragraph ;abel' as well).
Type your list, one item to a line. When the list is finished, select all of the items, then go Format > Paragraph... (or double click the white rectangle between the 'line spacing' buttons on the Ruler).
In the formatting dialogue, use the Labels pulldown menu to set the paragraph labels to Checkbox.
The checkboxes are live, and clicking them will toggle between an empty box and one with a (red) checkmark in it. The biggest problem with the checkboxes is that they are too small—about 3/4 the height of a lower case o.
Regards,
Barry -
Using CSS to change line chart tick mark font
I apologize if this has been covered elsewhere, but I can't find any reference to help with this.
I have create a dark-background theme for my CSS and have run into a bit of a blind spot with the CSS. My chart has a dark background, and I can find no way to change the color of the font on the tick marks. I have resorted for now to setting the individual axis objects setTickLabelFill for now, but it would be nice to be able to set this in CSS.
With this, I can change the font size of the axis labels and tick marks, but the font name and color are ignored for the tick marks:
.axis {
-fx-font: 14px "Palatino Linotype";
-fx-text-fill: white;
Thank you for your help.
- Jim
Edited by: 871682 on Aug 2, 2011 11:47 AMThat did work in 1.3, and I hoped it made it into 2.0, but that setting didn't help.
Setting the -fx-text-fill in -axix-tick-mark .label doesn't work either, or any variation I tried. -
Flex 4 HSlider Tick Marks?
How would one go about doing this. I have a class extending the Spark HSlider and a skin for it, but what kind of Display Object should I used to display the values for Tick Marks..
some code below: I figured DataGroup as a possible repeater component, but nothing shows. Any help being able repeat a set of Lines with X and Y values would be greatly appreciated.
Thanks,
Skitch
PlayerSlider.as (Component):
import mx.collections.ArrayCollection;
import spark.components.DataGroup;
import spark.components.HSlider;
public class PlayerSlider extends HSlider
[SkinPart(required="false")]
public var tickMarks:DataGroup;
public function PlayerSlider()
super();
[Bindable]
public function set tickValues(value:ArrayCollection):void
_tickValues = value;
_tickValuesChanged = true;
invalidateProperties();
public function get tickValues():ArrayCollection { return _tickValues; }
protected var _tickValues:ArrayCollection;
protected var _tickValuesChanged:Boolean = false;
* Adding the prompt text to the label if it's available
override protected function commitProperties():void
super.commitProperties();
if (this._tickValuesChanged)
if (tickMarks)
tickMarks.dataProvider = tickValues;
this._tickValuesChanged = false;
override protected function partAdded(partName:String, instance:Object):void
super.partAdded(partName, instance);
if (instance == tickMarks)
tickMarks.dataProvider = tickValues;
PlayerSliderSkin.mxml (SkinClass):
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:fb="http://ns.adobe.com/flashbuilder/2009" minHeight="11" alpha.disabled="0.5" xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Metadata>[HostComponent("com.digitalsmiths.util.playerSlider.PlayerSlider")]</fx:Meta data>
<fx:Script fb:purpose="styling">
/* Define the skin elements that should not be colorized.
For slider, the skin itself is colorized but the individual parts are not. */
static private const exclusions:Array = ["track", "thumb"];
* @private
override public function get colorizeExclusions():Array {return exclusions;}
* @private
override protected function initializationComplete():void
useChromeColor = true;
super.initializationComplete();
</fx:Script>
<fx:Script>
* @private
override protected function measure() : void
// Temporarily move the thumb to the left of the Slider so measurement
// doesn't factor in its x position. This allows resizing the
// HSlider to less than 100px in width.
var thumbPos:Number = thumb.getLayoutBoundsX();
thumb.setLayoutBoundsPosition(0, thumb.getLayoutBoundsY());
super.measure();
thumb.setLayoutBoundsPosition(thumbPos, thumb.getLayoutBoundsY());
</fx:Script>
<s:states>
<s:State name="normal" />
<s:State name="disabled" />
</s:states>
<fx:Declarations>
<!--- The tooltip used in the mx.controls.Slider control.
To customize the DataTip's appearance, create a custom HSliderSkin class.-->
<fx:Component id="dataTip">
<s:DataRenderer minHeight="24" minWidth="40" y="-34">
<s:Rect top="0" left="0" right="0" bottom="0">
<s:fill>
<s:SolidColor color="0x000000" alpha=".9"/>
</s:fill>
<s:filters>
<s:DropShadowFilter angle="90" color="0x999999" distance="3"/>
</s:filters>
</s:Rect>
<s:Label id="labelDisplay" text="{data}"
horizontalCenter="0" verticalCenter="1"
left="5" right="5" top="5" bottom="5"
textAlign="center" verticalAlign="middle"
fontWeight="normal" color="white" fontSize="11">
</s:Label>
</s:DataRenderer>
</fx:Component>
</fx:Declarations>
<!--- The default skin class is HSliderTrackSkin.
@copy spark.components.supportClasses.TrackBase#track
@see spark.skins.spark.HSliderTrackSkin -->
<s:Button id="track" left="0" right="0" top="0" bottom="0" minWidth="33" width="100"
skinClass="styling.skinClasses.sliders.track.HSliderTrackSkin"/>
<!--- The default skin class is HSliderThumbSkin.
@copy spark.components.supportClasses.TrackBase#thumb
@see spark.skins.spark.HSliderThumbSkin -->
<s:Button id="thumb" top="0" bottom="0" width="4" height="11"
skinClass="styling.skinClasses.sliders.thumb.HSliderThumbSkin"/>
<s:DataGroup id="tickMarks" left="0" right="0" top="0" bottom="0" minWidth="33" width="100">
<s:layout>
<s:BasicLayout/>
</s:layout>
<s:itemRenderer>
<fx:Component>
<s:ItemRenderer>
<s:Line
height="100%">
<s:stroke>
<s:SolidColorStroke color="0x525254"/>
</s:stroke>
</s:Line>
</s:ItemRenderer>
</fx:Component>
</s:itemRenderer>
</s:DataGroup>
</s:SparkSkin>These threads might be useful for you:
http://forums.adobe.com/message/2486681#2486681
http://forums.adobe.com/message/2476351#2476351
In CustomSlider4.zip there is a skin file called HSliderTrackSkinTicks.mxml that shows a very simple way of implementing tick marks. DataGroup should work too, but it will be a little trickier to line up the ticks properly. -
GR based IV tick mark in PO- not able to post MIRO
we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
1. Creation of PO with GR based IV check box enabled
2. Goods Receipt without excise capturing
3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
waiting for the responsehi,
thanks for the response
problem is MIRO is not posting whenever GR made with GR based IV tick in PO.
i have checked three scenario
scenario1.
1. created PO with GR based IV, but there is no Excise or Tax captured in PO ( means no FV11 created)
2. Created MIGO ( no excise parameter will appear)
3. MIRO done with respect to MIGO
this scenario is fine
Scenario 2 - current scenario
1. Created PO with GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. while doing MIRO for this scenario system is not able to post the MIRO because of the VAT in PO and GR based IV tick mark.
Scenario 3
1. Created PO without GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. MIRO system is picking from PO based IV. so, it is allowing to post
need your expert advice on scenario 2 - how to post MIRO
Maybe you are looking for
-
After installing and using PS Elements 12, I deleted PS Elements 8
I can no longer import music files to add to screen shows. What can I do to fix this without losing all of the indexing and projects that I have done with PS E 12?
-
How to refund purchases, or report a problem on previous purchases?
with the old iTunes you could report a problem with specific purchases. however, i can not find anything that represents doing so in the new iTunes.
-
Ever since updating to iOs7, I can not use face time or iMessage on my ipad2.
I am connected to wifi, I can get on itunes, the app store, google, use all apps, recieve and send email. But when I try to log in to iMessage or Facetime with my apple ID I get this message in a pop up box " iMessage Activation Could not sign in.
-
Is there an easy way to detect and delete duplicate home videos?
For some reason when I upload videos from my video camera I end up with two versions on my harddrive. A smaller version and a lager one. I have also had some other issues with iPhoto in the past that caused me to have to make a copy of a video before
-
Httpservice request has me close to despair....
Hi, I am trying to send multipleselections from a datagrid as request parameters. Since the request object is based on name value pairs, how do i send several items with the same name?? Regards Neil