Tick mark in Appleworks documents

Does anyone know how to put a tick mark into either a word processing document or a spread sheet box? I might be being dim here, but I can't find a tcik sign anywhere! (I mean like when you tick a box!)
Thanks

In addition to the option-v to produce a check mark (or a root sign) (√), AppleWorks does provide a 'live' checkbox as a paragraph label (a bullet is a 'paragraph ;abel' as well).
Type your list, one item to a line. When the list is finished, select all of the items, then go Format > Paragraph... (or double click the white rectangle between the 'line spacing' buttons on the Ruler).
In the formatting dialogue, use the Labels pulldown menu to set the paragraph labels to Checkbox.
The checkboxes are live, and clicking them will toggle between an empty box and one with a (red) checkmark in it. The biggest problem with the checkboxes is that they are too small—about 3/4 the height of a lower case o.
Regards,
Barry

Similar Messages

Tick Marks in Corner of Indesign Document

Hi,
I am making updates to an indesign document someone else created. There are two small tick marks in all 4 corners of the page (one vertical and one horizontal). The creater advised they were bleed marks. However, I looked in the Document Setup and found that the bleed/slug are both set at 0pt. I have done a lot of research and digging online without success. I also tried to look at the margins/guides, etc and did have much luck. Do you know what could be causing this? I would really like to remove them.
Thank you!

Please see the screenshot. The lines are in all 4 corners. Thanks!

GR based IV tick mark in PO- not able to post MIRO

we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
1. Creation of PO with GR based IV check box enabled
2. Goods Receipt without excise capturing
3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
waiting for the response

hi,
thanks for the response
problem is MIRO is not posting whenever GR made with GR based IV tick in PO.
i have checked three scenario
scenario1.
1. created PO with GR based IV, but there is no Excise or Tax captured in PO ( means no FV11 created)
2. Created MIGO ( no excise parameter will appear)
3. MIRO done with respect to MIGO
this scenario is fine
Scenario 2 - current scenario
1. Created PO with GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. while doing MIRO for this scenario system is not able to post the MIRO because of the VAT in PO and GR based IV tick mark.
Scenario 3
1. Created PO without GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. MIRO system is picking from PO based IV. so, it is allowing to post
need your expert advice on scenario 2 - how to post MIRO

Displaying 4 as tick mark in pdf in mozilla firefox 20.0

I am displaying a pdf in aspx page. In mozilla firefox 20.0, instead of tickmark , 4 is displaying. i.e. when a radiobutton is selected, instead of Tick mark pdf is getting displayed with 4. i am not facing this issue with older mozilla firefox version like 16.0. what is solution or fix for this?
Thanks & Regards,
Ammiraju

hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox > options > applications & scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

MS Word 2007 table lines have interesction tick marks

Hello,
MS Word 2007 SP2
Adobe Acrobat 9.0.0 Plus
A table created in Word, where row lines are shown but not column lines, shows on some lines tick-marks where row and colums would intersect. In AA version 7 this was not an issue, however, when converting from within Word this too was an issue.
The image below didn't turn out as clear here than the original, but you still can see the Word bit left and AA on the right with the tick-marks.
How can it be avoided?
Thank you
Stefan

I'm experiencing this myself. I found instructions to navigate to Edit > Preferences > Page Display. Then, uncheck 'Enhance Thin Lines'. This lightens the lines considerably; reducing the very dark, chunky lines. However, table lines are still not the same width/thickness regardless of the zoom level in Acrobat (50% - 800%). And there is no pattern to where thicker lines appear; header rows, odd rows, etc. A random mess. I'm 100% positive the lines are set properly in Word 2007. And interestingly, all tables lines display equal widths consistently in printed copy- when printing from the PDF. The issue seems to be Adobe's electronic page display and that the 'solution' I found does not work. I have the latest version of Acrobat Pro and a colleague has the latest version of the Reader without a writer license-- no conflict of versions or software suite.
I deliver documentation to customers electronically. My documents have many tables. My deliverables to look unprofessional and unpolished. My deadlines haven't been met due to research and this unresolved issue. Difficult to accept.
So frustrated! Please help!
Jennifer

Check Box With Tick Mark on Sap Script

Hello All,
We need to add a check box with tick mark on Sap Script.Please can anyone let me know how can we add it.
Regards
Amruta

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

How to select Exciseable tick mark in GRPO.

HI,
When doing GRPO. I couldn't select excisable tick mark.
please help me.
Regards
sami

Hi!
In 2007B, user can't check/uncheck Excisable Tick in Rows.
If, your item is a Excisable one, then
1. Mark Item as Excisable in Item Master and give Chapter ID
2. Mark the Warehouse as Excisable in Warehouse Master and give Incoming/outgoing Excise Accounts.
Now, Excise Check Box will Automaticaly Enable in Document Rows.

DropDownList with Tick Mark

Hello friends,
I want to implement DropDownList with tickmark.
snapshot of dropdownlist with tick mark is shown below
If user selects perticular item in the dropdown list it will be Highlighted by tickmark ,is their any way to implement this by using indesign SDk ?
If Anybody knows the solution , please help me.
Best Regards
Tahir

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

How to calculate the rotation degree of tick marks

Hello Again,
Thanks to so much help that I received here, I've been able to move right along in learning how to perform my job digitally instead of with an old camera.
In my last discussion, I learned out to make the tick marks using copies and rotation. My question now is, how is the rotation calculated so A) I get the correct placement of the tick marks, especially the small ones as there are so many and B) how do I calculate the rotation degree so that I have the proper amount of space at the bottom of the guage/dial?
Here is an image to help show what I'm asking:
I know how to get the large tick marks and the small tick marks, if I were placing them evenly around the entire circle, I would know how to do that also - but since I'm placing them around only a portion of the circle (although still evenly) I'm lost. I can only figure out the space by hit and miss calculations and that is taking much too long. I would also need to know how much to rotate the entire thing by in order to get the open space at the bottom as shown.
thanks for your help!

You need to use transform effects and you can get this in about 10 or so minutes.
first you need to set up the objects.
the thick lines I used effect>distort and transform>transform 20 copies angle 14
thi ones 100 copies angle 2,8
G

How can I convert an Applework document to .doc (Windows)?

Does anyone know how can I convert an Applework document to .doc (Windows)?

You can save an AppleWorks word processing document as Word using File > Save As… You will need to add the .doc extension as AppleWorks won't do it for you.
If you don't see Word as an option in the file type drop-down menu you likely have moved the AppleWorks application from the AppleWorks 6 folder and/or deleted the support folders, especially the AppleWorks Essentials folder where the translators reside.

Return PO box ticked for return PO document type

HI All,
There is a help need for Badi. While creating a return PO in T Code ME21N, i want to get return PO field ( EKPO-RETPO) box ticked for Return PO document type. I found one BADI for ME_COMMITMENT_RETURN. I need help to use this badi.
Regards,
Madhu.

Hi
Why don't use the BADI ME_PROCESS_PO_CUST, method PROCESS_ITEM? You have a demo. The idea is:
data: ls_mepoitem type mepoitem,
        ls_header type ref to if_purchase_order_mm,
        ls_data_header type mepoheader.
ls_mepoitem = im_item->get_data( ).
ls_header = im_item->get_header( ).
ls_data_header = ls_header->get_data( ).
IF condition IS TRUE.    "with LS_MEPOITEM, LS_DATA_HEADER
    ls_mepoitem-retpo = 'X'.
ENDIF.
im_item->set_data( ls_mepoitem ).
I hope this helps you
Regards
Eduardo

Will Pages under Lion be able to open old AppleWorks documents in the way that it does under Snow Leopard?

I've just read a thread that suggested that Pages will be able to open AppleWorks documents under Lion, is this correct?
I understood from discussions last month that one had to convert all old AppleWorks documents to Pages or Word or some other format BEFORE upgrading to Lion as Pages would not be able to read them afterwards.
I wanted to pass on a tip that if you have used the AppleWorks password protect on your files, you will not be able to open them in Pages, so you need to open them in AppleWorks first, and take the password off, or save them as a file which is not protected, or some similar work around.

The Apple Support Community (us) just calmed me right down! Hi everyone. I just down loaded Lion through the Apple Apps Store and blindly went ahead and installed it, putting my mental well being in Apple's hands, having trusted Apple since my first Apple II (1974?). But ... "What do you mean, Appleworks isn't supported?" In a bit of a panic, wondering what was to happen to my vast (really) stock of AW documents I came to Apple Support for help. Thanks to the input from Sue, Cornelius, Jonanna and others I took the leap and, clicking on the "OpenApple"-I, accessed the "Open With" switching the AW document to open with Pages. In a word, perfect. And, it looks like Lion has already told itself to open all AW (remember Claris?) documents with Pages. CM
( Except I just spotted a thread titled "AppleWorks doc won't open in Pages" ... Going there next. )

Free goods tick mark coming automatically in PO?

Hi Gurus,
While creating PO, free goods tick mark coming automatically in PO if i m entering net price..
I have checked material master as well as vendor master.Nowhere free good maintained in both.
Then, why it is picking automatically in PO?
Pls help..

Hi
The meaning for invoice receipt check box under invoice tab for any line item is that Po is expected Invoice for that line item.
If this check box is not set then PO considered free items with no invoice
So generally Invoice Receipt Check Box are kept in display mode through OMJ4 so that end user can not modify it
Edited by: Sanjay Shah on Feb 4, 2010 10:17 AM

I want to get windows vista on the macbook pro with retina display but my first question is this that how do i install it without using a DVD OR CD disk drive, and my second question while installing windows vista do i have to tick mark the install win 7

hello i have a few problems and i hope somebody has a solution my first problem is that how can i install windows vista without using a disk drive and my second problem is that should i tick mark the option which says Install windows 7 while using boot camp please reply, Thanks,

When running Windows in a virtual environment Windows and OSx share your computer's resources such as RAM. Therefore your games can not use all your computer's resources when running.
If you install Windows natively then Windows and your games can and do use all your computer's resource such as RAM.
But as already said, older operating systems are not supported and will not run natively using Boot Camp Assistant. You must use Windows 7 if installing natively in Lion or Moubtain Lion.

Transferred appleworks documents from emac to new iMac and can't open. what app can i use or get? help! i'm not computer literate.

I TRANSFERED APPLEWORKS DOCUMENTS FROM AN eMAC TO A NEW IMAC AND CAN'T OPEN THEM. THE MESSSAGE STATES THERE AR NO APPS GO TO THE APP STORE. WHAT DO I NEED TO PURCHASE OR GET? I'M NOT A COMPUTER GUY BUT I WANT MY RECEPIES AND STUFF. HELP

Welcome James!
For no cost, you can try the open-source productivy suite LibreOffice. I don't have any AW files here to test but there are reliable reports that LibreOffice can open at least some AW files:
http://www.libreoffice.org/discover/libreoffice/
Please turn off your caps lock key. All-caps text is harder for us to read and is considered "shouting" or "anger" by most internet text conventions. Thanks!

Tick mark in Appleworks documents

Similar Messages

Maybe you are looking for