Ticker Advice

Anyone know of a good news ticker component? (Or a straightforward way of coding one in AS3?) We need to incorporate a horizontal ticker at the bottom of a site. It doesn't need to feed RSS. It'll just be populated with little factoids the client will provide. I initially purchased and integrated this one:
http://www.oxylusflash.com/flashfile...1-with-rss-xml
Worked pretty well. Unfortunately, the developer who is building out the site just informed us that we need one that works in a .net environment and this component parses the XML through PHP. I'm a noob at all this so I don't even know exactly what I'm talking about!
Any advice or leads would be much appreciated!
Dan

Hi Sarah,
try the URL Button Component. This Button opens a hyperlink (also swf files) in the same or in a new window.
If your other Dashboards are somewhere in your Intranet (or internet), you can just add the link to the component and thats it.
If your other Dashboards are on the BOE Repository, then you can use the OpenDocument command for that in the URL Button Component.
Regards
Victor

Similar Messages

My macbook pro is running slow after upgrading to Mavericks. I have attached an etrecheck report. If anyone could offer advice I'd be very grateful

EtreCheck version: 1.9.15 (52)
Report generated 7 October 2014 20:12:21 BST
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 5 days 4:56:17
Disk Information: ?
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (380.46 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Problem System Launch Daemons: ?
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.mcafee.ssm.Eupdate.plist Support
[loaded] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.mcafee.menulet.plist Support
[loaded] com.mcafee.reporter.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
Microsoft Database Daemon
Internet Plug-ins: ?
nplastpass: Version: 3.1.21 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.7
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.10 Support
Safari Extensions: ?
LastPass-2
Pin It Button
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Application Enhancer Support
Flash Player Support
Growl Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      3% WindowServer
      3% ARM
      1% firefox
      1% launchservicesd
      0% sysmond
Top Processes by Memory: ?
406 MB firefox
111 MB Microsoft Outlook
102 MB DashboardClient
74 MB systemstats
66 MB Finder
Virtual Memory Information: ?
732 MB Free RAM
1.09 GB Active RAM
592 MB Inactive RAM
1013 MB Wired RAM
3.56 GB Page-ins
404 MB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

While creating a PO in ME21N the return check box is automatically ticked.

Hi SAP Gurus,
I am facing a problem while creating a PO.
Every time I am trying to create a PO in ME21N, the return check box at the Item level of the PO is automatically getting ticked.
The check box can't be unticked even in change mode of the PO.
So all of the PO's with different document types are getting created with the Return check box ticked.
Can you help me to uncheck the Return tab in the Item level.
Please advice if any configuration is required or the code has to be modified.
Thanks in adavance.
Regards
Subhasis

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

GR slip print-out & automatic default for the print tick

Hi,
I have followed the steps as outlined below for the solution and unfortunately the GRN document do not print as anticipated. I was wondering if the non-assignment of the MM or FI Program might be the cause? Please advice if I had missed something to allow this to print immediately.
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Edited by: JML Nkgapele on Dec 1, 2008 11:10 AM

Your answer did help but still expriencing challanges with the following:
Output Types
-Print Parameters options are as follows
    >Plant/Storage location
    >Plant/Storage location/User group
    >User exit
   >User parameters
   >User
Please advice which of the above is appropriate?
-Should there be a program reflected on change output field for General data screen?
Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

GR based IV tick mark in PO- not able to post MIRO

we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
1. Creation of PO with GR based IV check box enabled
2. Goods Receipt without excise capturing
3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
waiting for the response

hi,
thanks for the response
problem is MIRO is not posting whenever GR made with GR based IV tick in PO.
i have checked three scenario
scenario1.
1. created PO with GR based IV, but there is no Excise or Tax captured in PO ( means no FV11 created)
2. Created MIGO ( no excise parameter will appear)
3. MIRO done with respect to MIGO
this scenario is fine
Scenario 2 - current scenario
1. Created PO with GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. while doing MIRO for this scenario system is not able to post the MIRO because of the VAT in PO and GR based IV tick mark.
Scenario 3
1. Created PO without GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. MIRO system is picking from PO based IV. so, it is allowing to post
need your expert advice on scenario 2 - how to post MIRO

Flash remains completely buggy, despite trying all advice

Hi everyone,
So I've had problems with Flash on my MBP for some time now and I've been unable to resolve them.
I've searched this forum, read the available info at Adobe, and have tried a number of things suggested in other posts and on the Adobe site, but no luck.
Firstly, the problem:
Certain flash content I access with my system seems to work OK. Except for the usual CPU-hogging and fans going to high speed, some Flash content works as expected.
But more often than not, Flash content just doesn't work properly. For example, several youtube videos (not all, but most) don't work properly - the transport controls often don't display properly and just don't work. Trying to hit pause doesn't pause - it just starts the video from the beginning again right away, it's impossible to actually stop playback without just closing the window entirely. Not all youtube videos have this problem but most do. TED talks are an example of a youtube site where it always does this.
Other flash-based players like in MySpace also don't work properly. Pretty much 100% of the time I don't see any text in the music players (so no track names, no visual information), and the transport controls either work just for basic play and stop, or not at all. Yet some flash-based players do seem to work fine, such as the BBC radio 4 player.
Also, I have had flash completely crash my browser several times a day recently, when clicking on a related video in youtube. This flakey behaviour happens in Safari (latest version), Firefox (also latest) and Chrome (yes, latest version too).
My system is completely up to date with the most recent OSX version, and all of the security updates, Pro Kit and Pro App Support. I regularly repair permissions, and I regularly run system maintenance routines and cron scripts via a 3rd party support app.
My latest attempt to fix the problem:
I downloaded the flash player uninstaller from Adobe, made sure that all apps were closed and ran the uninstaller. I then repaired permissions and restarted. After restarting, I installed the latest Flash for OSX, then repaired permissions straight after. When I did this, I saw that disk utility made a list as long as my arm of permissions that it repaired, almost all of them related to Flash.. so I figured this might be a good sign. I ran repair permissions a 2nd time just to see if it had missed anything, but on the 2nd time round, there was nothing more to be repaired. Still, as an extra precaution, I restarted again before attempting to launch a browser. Upon restart, I opened Safari and went straight to youtube. Sure enough, no change whatsoever. The very same problem still exists in exactly the same way as before.
I've had this trouble for a long time now, and I'm getting tired of trying to fix it. I like watching youtube content but I hardly do so anymore, because being unable to pause and resume viewing makes it a more annoying experience than its worth most of the time, not to mention the browser crashes. My Snow Leopard install was painstakingly undertaken from scratch - I used to have Tiger on this machine, but installed a brand new 500GB internal drive to do a completely fresh install of OSX when I made the move to Snow Leopard late last year.
I'm no novice to managing Macs - as I said before, I do all of the maintenance routines regularly.. but this problem just won't go away. I'm starting to suspect that there's so much bad blood on the whole Flash issue with Apple and Adobe that it wouldn't surprise me if they're intentionally making the whole thing flakey just to make users like me hate Flash more and more.. so that we'll be happy to see it condemned to history and won't miss it on things like the iPad.
I've never been a fan of Flash, and like everyone I think it's ridiculous how much it winds up the fans and hogs the CPU on my MBP just to play a silly little video. So sure, I'll be happy when no one uses it anymore. But for now, I actually would like to have it working because like it or not, it's the reality for youtube and a number of other sites.. I don't see why it should be so consistently buggy on my system when I have the very latest updates of everything and I religiously manage my computer to keep it in great shape. I work professionally using Logic Pro on this very same computer, and in every way apart from Flash, the machine is in tip-top condition.
If anyone can tell me what the h*ll I can do to fix this, I'm all ears. In the meantime, I'll probably reserve a genius bar appointment to look into this.. but I've been to the genius bar before only to find that the 'genius' was less skilled at Mac maintenance than I am. So I won't be surprised if I'm sent home with the usual knee-jerk reaction advice - 'zap your P-RAM and reinstall OSX'. If that's the best they can do, then I'm just going to live with the problem because as I said earlier, my system is performing brilliantly in every other way. There is no way I'm going to put myself through all the reinstall process for all of my professional apps, reauthorizing dozens of plug ins etc etc, just to fix this problem. For the professional work I do, this computer is finely-tuned and running like a dream. In fact, I find it hard to believe that there might be something fundamentally wrong with my system that a reinstall would fix - purely because if there was something wrong deep down in the system, then the suite of professional apps that I use for work would surely be showing problems much more than a meagre little application/plug in like Flash.
Anyway, if anyone can think of anything that I may have missed, I'd love to hear about it.
Cheers.

Hi, thanks for the input everyone.
Rather than trying to take quotations from multiple posts, I'll attempt to answer all of the pertinent questions you all brought up without going from quote to quote.
In terms of which browser - as I said in my original post, I have 3 - Safari, Firefox and Chrome. Same problem is experienced in each. I just tested them again (literally right now) after having done the very thorough uninstall/reinstall of Flash, and it's still as dodgy as ever. I have to admit I've only ever seen a browser crash (caused by Flash) in Safari, but that's probably only because Safari is the browser I use most and am never in the other browsers long enough to let Flash decide to explode.
As for launching Safari in 32 bit mode.. you got me excited there for a moment cos I thought that indeed maybe I was in 64 bit mode and my problem could be over.. but alas, I checked and there it was, that 32 bit box was already ticked. Sigh.
I've tried to backtrack this problem to see if I can rule out whether it was a new thing since Snow Leopard or not. Then I decided to actually test this, because I still have a bootable clone of my Tiger system exactly as it was the day I moved to Snow Leopard. Booting from that system, I was reminded that yes.. I had problems with Flash under Tiger as well. Similarly, it was somewhat arbitrary with some sites working fine, others not so fine. Some youtube videos would have strange transport control issues, others none at all. But upon checking, the problem was not exactly the same.. In my current system, it seems like a great deal more youtube videos don't work properly, and the way in which it plays up is worse now than it was before. Example: in Tiger, I would regularly have youtube videos where I could never click somewhere in the timeline and have the video play from that point. If I tried to do that, it would just jump back to the beginning and start playing all over. In Snow Leopard (notably with TED Talks videos, but with many others too), not only is this also the case, but I never can use the play/pause button because it just jumps back to the beginning every time. Also, mousing over the transport area, I get a weird white/grey box in the space where those transparent ads should be. And then, in both Tiger and Snow Leopard, I occasionally get a situation where the transport bar will just go crazy, moving really fast as if the video is like 3 seconds long and then jumping back to the start and jumping all over the place. But the video itself plays normally, except of course that you can't pause it, jump to a different place in time or whatever. And to top it off, it's usually a sign that Flash is going to do its best to bring down my whole browser some time soon.
Anyway thanks again for the pointers. I've also emptied the cache a few times in my browsers, no luck either. Frankly I'm pretty much over wasting time getting this to work - given that my system is in pristine condition, regularly maintained and totally up-to-date, I'd find it very strange if no one else was experiencing some youtube videos behaving in this way too. It seems like there must be a fundamental bug or series of bugs in there somewhere that no matter what I do, I'm not going to be able to get around until the people responsible actually fix them.
Thanks for the heads up on the HTML 5 youtube site! I've just signed up for that and checked some of my regular youtube content that I watch.. It WORKS PERFECTLY! Brilliant. I think I'm going to consider this problem solved now, because I'm so turned off by Flash that I'm now quite happy to see it die a well-deserved death, the faster the better. Like I hinted at earlier, I wouldn't be at all surprised if this was all some top-secret machiavellian plan from Apple HQ.. I doubt they'd go as far as to intentionally kneecap Flash so that it doesn't work and drives users to hate it so much that they start pushing everyone to move to alternatives. But I bet it's just as easy to not bother putting in the effort to bug-fix, because in the end you get the same result. In my profession, Digidesign do exactly the same thing with their hardware - it works flawlessly like golden molten butter when you use it with their own software. But the minute you use it with something else, it's so dicey that end users could easily be convinced that it's the other software that's badly written... It seems to be a valid (if sneaky) strategy used by the technology industry these days to nudge users in the direction they want them to go...
Anyway thanks a lot for that advice. It was mainly only youtube that was driving me nuts, so now that I can use it without Flash, I might even totally remove it from my system. Too bad for MySpace, but whatever..
Cheers!

Payment advice is not issued

Hi expert,
I have made a payment run to pay 2 vendors.
I have selected a variant to create payment advices.
When I do the print out, I get only 1 payment advice (for 1 of the vendors).
What could be the reason why the payment advice for the other vendor is not created?
Thank you.
Kind regards,
Linda

Hi,
I dont think this is for your scenario.
As it clearly says that
Indicator: Separate Payment Advice if Form is Full?
Indicator that determines that a payment advice note is to be printed if
more items are paid than there is space for in the form.
this means
As per this TICK,I understood that ,if more line items are ther for vendor to pay and which is not able to print in 1 form,then it is going to print in another seperate form(payment advise)
Thnks jabeen

F110 payment advice issue

hi experts
i have a question how to find the print program by knowing the scpript name?
we use the transaction code f110 to do the payment, then we print the payment advice. In the paying company code setting we know the script name. the user want to print the fixed lines in the first page, I check the script and can't find the line number setting in the script soure code. that's why i want to find the program call the script. I guess it's should be a sap standand program , so is there any configuration we can follow to make ithe request come ture
any voice will be appreciate
TIA

hi Sai,
we can't test in our test system. can we just directly change the variant in the product sytem is there is anyother impact from this change.
and i have another qusetion , although it's a stupid question.
Are you sure after we tick that checkbox the cover language will be showed as English not German any more? Or have you met the similar issue before ?
appreciate if you can response the most
warm regards

Payment Advice issue in T-Code: FEBA

Hi ,
Many of our deposits in FEBA are now showing up with a payment advice. These payment advices are completely unrelated to the deposit. This has been happening for approximately a week. The items can still be posted, however all the unrelated payment advice information must be deleted from the posting screen.
Thanks....

Hi,
maybe there is an authorization problem, tick the "info" button in the "administrator" screen there is an authorization object mentioned.
In the SAP-systems I know the column is set to "invisible" so it must be changeable (as it is in your system set to "visible").
best regards, Christian

A problem with Static/RSS ticker

Hello everyone!
I have a test lab set up (DMM 5.1 and DMP-4305G, license is OK).
I made a few presentations with Cisco Digital Media Designer that included video, text ticker and RSS ticker.
Video works fine.
Static text ticker almost works perfect, only i can't change the effect of text (it's alwys fadeing even if i change it to left/fight scroll).
RSS feeds are visible in Cisco Digital Media Designer and seems to work, but when i play it on DMP, the box with rss feed is blank.
Please, i need some advice, i tried everything i could think of...
Best Regards,
Ales

Hi Aurelio,
Thank you for your post!
This is the rss link i am using:
http://www.rtvslo.si/slovenija/rss
As i said link appears to work in Digital Media Designer.
When scheduling the presentation to DMP i have no result.
I tried different links. This for instance link works perfect-> http://newsrss.bbc.co.uk/rss/newsonline_world_edition/europe/rss.xml
i also copied the source code of bbcRSS and modified it (it is attached to this post) and put it on my web server, checked it with explorer - it works;
on Digital Media Designer the link is not reachable, please advise.
What could be the issue? Character coding maybe?
( i also noticed by using static ticker that DMP-4305 can't show slovenian special characters => š č ć ž )
Does DMP-4305 / Digital Media Designer support different character coding?
Thanks again for you help,
Cheers!
Ales

Cheque and payment advice through different printers

Hi ,
We need to print cheques and payment advice through different printers ,
for both the above documents we are using z programs ....
Both get printed at the same time ,whenever a cheque is printed a payment
advice is also printed .
any idea how to achieve this .

In F110 under Printout/ Data Medium , select variant and then maintain variant.
In print Control, Tick the following:
1)Print Check Print Immidiately
2)Print Payment Advice Print Immidiately

Remove tick Only balance in local currency

Dear Experts,
One of my Balance Sheet GL Account has a tick Only Balances in Local Currency and I want to change the properties of GL Master by removing the tick since the same is to be taken in Valuation Program.
I have made the balance NIL of the Account but still I am not able to change the properties of GL Master and get a Message no. FH085.Request you to kindly advice on the same.
Regards,

Dear:
Please check FS10N on FBL3N for local currency for closing balance to some GLs and nullifying the balance. if there is any. If local currency is 0, only then you can switch off balances in local currency check box in FS00.
Regards

Good receipt should be ticked default for PO

Dear Gurus,
When i create Purchase order for document type "NB", i want the default tick should be marked for Good receipt - under Item details>>Delivery>>Goods receipt
In SPRO, where i can do the configuration
Please advice
Regards
RS

Dear Mohammed,
We use to create PO previously with
Case 1: Account Assignment "K" and short text - in that case we need to tick the GR
Case 2 . Account assignment blank and materials number - default GR tick will come.
Now we are creating PO with Account Assignment as "K" with Material Number - now the GR tick is not defaulted.
This Account Assingment "K" - GR ticked in maintain Account Assingment in all DEV, QAS & PRD system
You advice is more appreciated
REgards
RS

HT204384 My SD card wont read in FInder but will show in disk utility, any advice?

Hi, my card reader started to become inconsistant over the last week and it has now stopped reading cards all together. It will show up in Disk utility so i can format it etc but it just wont show in the Finder section. When i remove the card without prompting, i get the 'Failed to eject properly' message. Any advice would be appreciated. I only purchased in Nov 2011 brand new so not sure what operating system it is but you may know from date of purchase.
Thanks
Rob

I had this problem too on my MBP mid-2012 running Mavericks. SD cards (in MBP slot or USB reader) would not show up in Finder. I was able to see them mounted in Disk Utility. What tipped me off that they were in fact mounting (and led me to check Disk Util) is that the OS complained of improperly ejecting the sd card when I removed it.
To clarify what BDAqua said, but I didn't understand until I saw another thread, here's what fixed my problem: Click on 'Finder' 'Preferences', select Sidebar tab and tick the box 'external disks' in the Devices section.
Now my sd cards show up. Thanks!!

Need advice about text to speech

It doesn't appear that the built in text to speech functionality will do what I need it to. The voice I need for a project is the popular Steven Hawking voice. I need to to be able to speak back a script that I've written and be able to record it in some sort of audio format that I can use on the internet.
Does anybody have any advice?
Thanks.

Really? I don't have Snow Leopard yet, but under Leopard both Fred and Bruce (well more Fred) sound a lot like what I remember Steven Hawking sounds like. Maybe slow it down one tick below "normal."
Have they removed those voices from SL?
As for recording I think you could use SoundFlower and Audacity. Both are free -- not sure if either have been updated for SL yet....

Ticker Advice

Similar Messages

Maybe you are looking for