Ticker to display info
Hi,
I want a ticker to run at the top or bottom of the portal screen almost like a stock ticker, but it will only display some update info. I have the HTML for this and I can add it to a template that is called from a iView, but then it only runs across the top of this iview and not the whole portal screen. Is there a way of doing this?
Hi,
I'm not sure I understand, but you could put the iview to the framework page above the masterhead iview. That should show the iview across the whole portal page on the top.
Romano
Similar Messages
-
Report for displaying info record scale prices
Hi all,
Can any one provide me the sample code for a report displaying info record scale prices.
Thanks,
SureshCheck t.code MEKP.
-
Help with displaying info from database+asp
How can I display info from a database so that it is
formatted into rows in a table
here is an example of what I would like
http://www.westerveltcollege.com/new/programs/bus_admin_computers.html
(it is the section that show the course content)
I know it has been code into the table but how to do this
dymanically
hope that makes sense to someone ;)To do it properly you would set up two tables. The first
would contain the
topics and be something like this
topicID
topicName
Then you would have a second table that would hold the
content like this
contentID
contentName
topicID
The last field links this table to the topic.
To display them you would link the topics into a master list,
and then pass
the topicID to the page displaying the content and use the
topicID as a
filter on the content table.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"jnc1965" <[email protected]> wrote in
message
news:eeot1q$db0$[email protected]..
> nice one thanks
>
> now one more quetion
> how do I set up the info in the database
> I have serveral page for different topics and each page
has a table like
> mentioned above
> I dont want to make a different colunm for each for the
course contents
> I would like to build one table and have each subject's
course content in
> a
> column but how would I do this?
> and still have appear like the example
> -
Adding Flash ticker tape display of still photos
This questions is really directed to "Old Toad" - I find your sample iWeb site extremely useful however I have a question. On your example of a flash ticker tape display you mention that the HTML was obtained from OVI.COM - I cannot find anything even remotely related on this site - HELP??
Pat:
First you need to create an account on OVI.com, upload the photos you want to a "channel". That's somewhat equivalent to an album in iPhoto. In that channel you click on share this channel and there will be code available for a ticker tap, a slideshow, etc. You copy that code and put it into an HTML Snippet on a page. Viewers who click on the ticker tape would normally be taken to your channel at the OVI.com site. To prevent that put a transparent shape over the ticker tape item.
OT -
I have Windows 7 & Adobe 11 installed on my P.C (Apart from other Software) . Recently I downloaded Digitally Signed .pdf files & validated the Signature with Trust Certificates . However , the Green Tick Mark is coming on the left-hand side of a blue panel situated in-between the menu bar & the document . Shouldn't it be coming at the bottom right side of the document (Just above the name of the signatory) ? Is there anyway I can get the green tick to display at the bottom right side of the document or is this just the way the green tick gets displayed in current versions of adobe reader ?
This is the way it gets displayed on the top - left portion of the screen :
However , it does not get displayed in the below manner :First of all, you need an app on the iPad that can read those files that you want to transfer. Adobe Reader and iBooks are two free apps that will read PDF files. Adobe Reader is much more robust than iBooks as it offers so many more features like renaming files, creating folders, annotating, highlights, etc.
Download Adobe Reader in the App Store. Then read this about file sharing with iTunes.
iOS: About File Sharing - Support - Apple
There are other ways to get files to the iPad, like email, DropBox and some other apps that let you mount your iPad like a flash drive.
This should be helpful as well.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad -
Can you display info from 2 text fields in 1 other text field in a form?
Im trying to make a form where you enter an address. I want that info to display in another part of the same form as well. When I get to the City and State, I want those to be 2 separate fields where you enter that info. Down below, I would like those to display in the same field with a comma separating. I want to do this mostly because you never know what the length of the city name will be and dont wan the state to be so far away to the right of the city jsut to compensate from possible long city names.
I know how to make it display those field in other parts of the form normally, just not how to double them up. I figured if the form was named "text1, text2" or "text1+test2", that might work but it didntIm thinking thats how im going to have to do it, i just want it to show up more like
RICHMOND, VA
instead of
RICHMOND VA
because some cities are way long and im a little crammed for space -
What is the best practice to display info of completed task in process flow
Hi all,
I'm starting to study BPM modeling with CE7.1 EHP1. Thanks to the tutorial and example on SDN site and I can easily build my own process in NWDS and deploy to server, start it, finish it.
I like the new runtime which can show a BPMN diagram to the processors. However, I can't find a way to let the follow up processor to review the task result completed in previous step. I'm more familiar with Guided Procedure, and know there is "Display Callable Object" which can used to show some info of a completed task when the processor/owner/admin/overseer click on a completed task. Where is the feature in BPM ? What is the best practice to show such task information in BPM environment.
For example, A multiple level approval process, the higher level approver need to know the comment written by the previous approver. Can he read this information from process flow ?
I think it is very important feature for a BPM platform. In Guided Procedure, such requirement can be done with Display Callable Object + View Permission, and you just need some coding for the UI. If BPM is superior to GP, I think there must be a way to achieve this, I just do not know how ?
Can anyone shed me some light on it ?Oliver,
Thanks for your quick reply.
Yes, Notes and Attachment CAN BE USED for the purpose. But I'm still looking for a more elegant solution.
With the solution of using Notes/Attachment, the processor need to give input at two places : the task UI and Note/Attach , with similar or same data. It is really annoying.
Is there any SAP BPM real-world deployment ? None of customer has the requirement ? -
Server admin doesn't display info
I'm experiencing slow network logons for our 10.6.8 Mac Mini server (circa 2009).
I can't get server admin to display any info - the fields are blank - both logged on locally and remotely.
I looked in some logs, but don't know which ones are useful as a starting point for this issue.
Can you help point me in the right direction?
ThanksDo you get any errors or indications that changes are required when issuing the following (non-destructive, informational) Terminal.app command?
sudo changeip -checkhostname
Is the domain a real and registered domain, or is it a ".local" domain?
Is the configured server at a static IP address? (Either a static address on a private LAN, or a public static address.)
Is there exactly one DNS server or one pool of DNS servers, and is that DNS server or pool local? (Are there any references to other non-local-LAN DNS servers?)
Logs? Assuming the server isn't all that busy when you test, launch Console.app, start your connection test with the Server Tools, and look at the aggregate log display for errors. (If it's busier box and can't be quiesced for testing, then yes, you can have to drill down into individual logs, or grep -R the /var/log directory for server or such...) But without knowing what (else) is wrong, it's difficult to predict. -
Mac Mini Newbie seeks LCD Display Info
Hi
Am about to purchase a Mac Mini. Wondering if I can utilise an LCD TV as my display rather than pay out for an Apple Display?
What Max Resolution will I achieve? Will it be comparable to an Apple Display?
Any other advice from people whom have done same?
Thanks! All info appreciated.
AndyBoth items #1 and #2 can be corrected using the Gefen DVI Detective.
-
Use same web template to display info from database
I want to create a web template or form (for lack of the correct terminology) I can use to display database info. Database holds info on a number of members. I want to use one web template/form that can accept a query string parameter (Ex., ID number), access
the database and display the unique info for that member.
Using a web template/form seems like a more efficient way of achieving what I want versus creating individual member pages. Where do I start? Can you direct me to the "starting line"? Thanks.Hello,
Did you means this:
http://msdn.microsoft.com/en-us/library/ms227423(v=vs.90).aspx
Summer -
I have edited the default edit form for my Issue Tracking Tool using Info Path, But currently when I try accessing the form using IE 10 64x , I got the following error-
“The form cannot be displayed in the browser because the use of DOM storage has been disabled in the current browser settings. In order to load the form, DOM storage must be allowed.”
But using Firefox I was able to access the edit form , so can anyone advice on this please?
Thanks. Tools > Internet Options > Privacy Tab > Advanced
Check the over-ride box to Enable/Accept cookies. Click on Always allow session
cookies.
2. Clear Your Cache and Cookie Files
If you are using an Internet Explorer browser, please follow these instructions to clear
your cache and cookie files: Open your Internet Explorer browser.
Tools > Internet Options > General > Browsing History
Click Delete Browsing History.
Delete Temporary Internet Files, Cookies and History Also under Browsing History,
click Settings and make sure that your browser automatically checks for newer versions
of stored pages. Click OK and restart your browser
3. Pop-up Blockers
Turn Off the firewall in IE.
you can disable\enable it from below:
http://webdevwonders.com/clear-dom-storage/
Clear DOM Storage in Firefox:
Select “Tools” -> “Clear Recent History”, open “Details”, check “Cookies” and select “Everything” as time range.
ATTENTION: No other time range will clear the DOM Storage. Have a look at
Mozillas documentation for further info.
Disable DOM Storage in Firefox:
Type “about:config” in your address bar and hit enter to view your internal browser settings. Scroll down to „dom.storage.enabled“, right click on it and hit „Toggle“ to disable the DOM Storage.
Clear DOM Storage in Internet Explorer:
Select “Tools” -> “Internet Options” -> “General” -> check “Delete browsing history on exit”, click on “Delete”, check “Cookies”, click on “Delete” once more and restart your browser afterwards.
Disable DOM Storage in Internet Explorer:
Select “Extras” -> “Internet Options” -> “Advanced” Tab -> Go to “Security” -> uncheck “Enable DOM-Storage”
Clear DOM Storage in Chrome:
Select “Tools” -> “Clear browsing data…”, check “Delete cookies and other site data”, select “Everything” from “Clear data from this period” and click on “Clear browsing data”.
Disable DOM Storage in Chrome:
Open “Options” and select “Under the Hood” Tab. Click on “Content settings…”, select “Cookies” and set “Block sites from setting any data”.
If this helped you resolve your issue, please mark it Answered
ok i did all these steps but still i am getting the same error,, i can not understand how SharePoint works better on firefox and chrome comparing to IE !!! so what i should do now , as all the edit forms that are customized using Info path can not be viewed
on IE 10 64x !!!! -
Show CD on CD insert does not display info
When loading a CD, iTunes does not update and show the new album info. Last album continues to display. Advanced preferences are set to "show CD"
Latest available is the simple answer
Console OES2 SP2 Oct 2009
Netware 6.5.8 with most (if not all post SP8 patches)
4.91 SP5 IR1
Seb
"Simon Flood" <[email protected]> wrote in message
news:guHDq.62$[email protected]..
> On 07/12/2011 09:45, Sebastian Cerazy wrote:
>
>> I have it on quite few IPs from DHCP that java console does not display
>> the
>> info, it just hangs there
>>
>> Most are displayed OK
>>
>> Not much of a problem, I use iManager is the console does not work, but
>> would like to know why it does it
>
> Versions please:
>
> * What version of the DNS/DHCP JavaConsole are you using?
> * On which platform?
> * If installed, what version of the Novell Client?
> * What version of OES2 are you running?
> --
> Simon
> Novell Knowledge Partner (NKP)
>
> ------------------------------------------------------------------------
> Do you work with Novell technologies at a university, college or school?
> If so, your campus could benefit from joining the Novell Technology
> Transfer Partner (TTP) program. See novell.com/ttp for more details.
> ------------------------------------------------------------------------ -
I've been advised to my problem in this part of the forum. So, Adobe Bridge people, please see this thread:
http://forums.adobe.com/message/3616660#3616660
Thanks!Thanks for your help, I looked around and didn't find anything with that name. But I did find a seeting under preferences, a checkbox, that said "metadata" but that was already ticked.
I ticked the box from Supports XMP though, and did the show hidden files setting in Bridge, but nothing changed.
Files that bridge identifies as untagged still load their various embedded colour profiles in Illustrator etc. which is good. - The files behaving as they should is more imporant than Bridge's ability to display information about the files correctly. So I guess I just won't use Bridge, so I can't get annoyed by it! An interesting solution....! -
Query to display info depending on certain criteria
Hi,
I have a CFC with the following query in cfcomponent.
<cfcomponent>
<cffunction name="getMarket" access="remote"
returntype="query">
<cfquery name="qmarket" datasource="test" >
select
DISTINCT tbl_orders.market as marketname
from tbl_orders
where trading_date = 'I dont know how to display the date
here'
/cfquery>
<cfreturn qmarket>
</cffunction>
</cfcomponent>
On my flex application window I have a DateField control
named 'date_control',which displays a date which is found in
tbl_orders. For your info, tbl_orders has the following fields
(market, trade_date etc). How do I put in my query (in my cfc), the
trading_date='date_control' in the 'WHERE' statement.
Should you have further queries, or any doubts please let me
know.
Many thanksI'm not familiar with the CF side, but you need to pass the
selectedDate property of the Flex DateField to the cffunction and
the cffunction needs to have a <cfargument> tag. You'll have
to look up the syntax for that in the CF manuals. -
Help with a popup window displaying info from a record set
Hi I am working on a Shopping cart web site I have set up my
database and I have created my page to display items from the
database. The fields in my database table are auto_id, category,
sub_catagory, manufacture, style, descripition, descripition2,
price, image, image2, fc_id, link_id
What I am trying to do is to display this part of the info in
one record . manufacture,style,descripition , image and price there
will be a link from this page (link_id)to display a popup and in
that pop up I want to display
manufacture,style,descripition2,Image2
basicly I want to now how to put a link in database so when
all of the data is displayed on the page I want to click on a link
(link_id) from any record that opens a popup to display a larger
image and a longer descripition of the product. and anything else I
may need from that record.
I hope this maks sence
Cheers
DaveIn your product insert form or however you are adding these
products to the store add a feild called image link2 or
large_img_link
in your code for the pop up window you would wrap your PHP
recordset like this
<a href="
http://yoursite.com/images/large_images/<?php
echo $row_image_rs['large_img_link']; ?>"><?php echo
$row_image_rs['large_img_link']; ?></a>
This will produce a link like this
http://yoursite.com/images/large_images/myLargeImage.jpg
the hot spot will be your second php tag which is the
thumbnail image itself that is now wrapped with the larger image
link.
Hope this is helpfull
JM
Maybe you are looking for
-
I have been through everything suggested on this site to get my tabs back at the bottom, nothing is working, in config it is set to false and already was, this just changed this morning and i can not fix this or get the reload button back, i want thi
-
I just bought a 4625 printer. During the installation process a claim code was generated. After that I changed the printer email address. Two days later by some reason (I don't know what I did) a new claim code was generated. When I tried to print a
-
Does installing Lion Server mean: No Sleep ?
Hi, I have the problem, that my iMac won`t go to sleep automatically after the time I setup in the energy saver settings. I can get it asleep, if I select Sleep in the Apple menu, but it is only working manually. I already tryed resetting PRAM, NVRAM
-
Af:autoSuggestBehavior How to fire it only after specific char count.
Hi, In our application we have a input text with af:autoSuggestBehavior. When the user starts typing a small drop down come which displays the result. The client requirement is that the drop down should not come(appear at all) till the user types fir
-
HT5655 adobe flash player issues
Does anyone know why when I update my flash player that it does not appear in my applications?