Ticket creation time and server time is not same.

Dear All,
When I create ticket from satellite system it takes time 3 hrs ahead for message and for smart form.I checked with server time which is same as current time. What would be the cause of this time miss match?
Points would be rewarded.
Regards,
Nikhil

Hi,
Please check your Timezone using STZAC see how much time difference you are getting.
See to that your OS Level timezone and SAP Server timezone are same.
Hope this will solve your problem.
Feel free to revert back.
--Ragu

Similar Messages

The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
Thanks

Hi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected]

MicrosoftDNS Container Conflict Resolution - Creation times are the same

Everyone,
I am trying to resolve an AD conflict for the MicrosoftDNS container. From my research the general rule appears to be "delete the newer object". The problem I have is that the creation time of both containers is identical:
Class Created DN
container 5/9/2003 17:31 CN=MicrosoftDNS\0ACNF:b8738f66-3c40-47a2-bb20-925ea9c65046,CN=System,DC=<removed>,DC=<removed>
container 5/9/2003 17:31 CN=MicrosoftDNS,CN=System,DC=<removed>,DC=<removed>
The mangled container shows in the default naming context and the CN=DomainDNSZones context but not the CN=ForestDNSZones context (within ADSIEDIT)
The mangled container just holds CN=RootDNSServers zone whereas the "normal" container holds CN=RootDNSServers plus a number of reverse zones and the forward zone for our domain. Some of the zones within the "normal" container show as
"InProgress" but I know what to do with those.
Which container should I delete? My gut says the CNF container...
Thanks in advance for your help,
Kevin

In addition, CNF DNS data Deepdive. Have a look.
http://blogs.msmvps.com/acefekay/2009/09/02/using-adsi-edit-to-resolve-conflicting-or-duplicate-ad-integrated-dns-zones/
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Windows 8 and Server 2012. Not detecting network is a domain.

Hi Guys,
I hope I have posted this to the correct forum.
I have 2 x Windows 8 PCs that do not detect that they are connected to a domain (network location awareness not working). I can join them to the domain but they still don't recognise the network as a domain. Instead they identify it as "private".
Other PCs on the network (Win XP and Win 7) work prefectly, just the windows 8 machines don't work.
Also, when I do join them to domain I also receive this message.
"changing the Primary Domain DNS name of this computer to "" failed. The name will remain xxxx.local. The error was: the specified domain either does not exist or could not be contacted. "
I have tried the following
- DHCP and DNS has being tried both as static and dynamic (can ping DNS server which is the domain controller Windows Server 2012) .
- Updated PC NIC drivers.
- No AV is installed on either server or PC.
- Updated PC to windows 8.1.
- Disabled both server and PC firewalls.
- Check NLA service and all dependent services are running.
- Disabled all adapters on server except for one.
I am really hoping someone can help with this as I would really appreciate it.
Thanks.
Shaun

Hi Guys,
I managed to find a solution to the problem. I noticed that the DNS server zones did not look quite right. The _msdcs zone was missing the subfolders (dc, domains, gc, pdc).
To fix this issue: on the NIC adapter I had to tick the box "register this connection's addresses in DNS" (found under TCP/IP v4 > advanced > DNS tab).
I then had to remove the DNS role, reboot then re-add the role. Problem solved. Hopefully this saves someone else pulling their hair out for an entire day.

XML Monitor time (sxmb_moni) and Message Monitoring (rwb) not same.

Hi,
I have changes the TIME ZONE using STZAC but then the xml monitoring time log still doesn't match with the system and java engine time.
Please help.
Thank you and Regards
Fernand

Hi
Follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3cced290-0201-0010-99bc-ff88c32a4495
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Regards,
Santosh.

If default domain name and server name is not accepted weblogic server 6.1 does not start as NT service

I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu

Hi,
I could start weblogic as an nt service by changing the name of the
default server and domain. I had to include password in the
installNTservice script.
Thanks
Madhu
Michael Young <[email protected]> wrote in message
news:[email protected]..
Hi.
Please open a case with BEA support.
Thanks,
Michael
m holur wrote:
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from
NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu--
Developer Relations Engineer
BEA Support

How do we Install Forms 6i and Server 8i on the same machine (PC)

Well i am Trying to Install Forms6i and Oracle 8i Server on the same PC and not succeeding. Can anyone help.

Follow below steps
1. Remove all Oracle versions in your machine. In NT, To Delete Oracle, delete HKEYLocalMachine/software/oracle , HKEYLocalMachine/software/services/oracle* registry keys, restart m/c and delete all oracle home directories.
2. Install Forms 6i Server in the default home directory. If you want to develop forms in same m/c, use custom installation and select forms server, forms developer and webdb listner ( if needed ).
3. Install Oracle 8i in a different oracle home.
4. configure oracle forms server and webdb listner. ( See Note:107596.7 in matalink)

Values from event and from bindings are not same in valueChangeListener

Hi, in a valueChangeListener method of an af:selectOneChoice component I get
the new value from the event with:
valueChangeEvent.getNewValue()
and from bindings with:
JsfUtils.getExpressionValue("#{bindings.Parflag.inputValue}")
But the value from bindings is the previous value set in UI.
Why is this happening? In ADF Page lifecycle manual it is referenced that “update model values” face runs before “invoke application” so why the value in bindings is the previous value?
Any comment will be helpful,
Thanks.

That’s right.
Could anyone comment why a valueChangeListener is regarder as a
Validation Process and not an Application Action that commits business changes.
I mean if I need a validator I can put an f:validator to the component and that’s all.
The immediate attribute didn’t change the result, the method is run before bindings set.

Best Practices when replacing 2003 server R2 with a new domainname and server 2012 r2 on same lan network

I have a small office (10 computers with five users) that have a Windows 2003 server that has a corrupted AD. Their 2003 server R2 is essentially a file server and provides authentication. They purchased a new Dell 2012 R2 server.
It seems easier to me to just create a new domain (using their public domain name).
But I need as little office downtime. as possible . Therefore I would like to promote this server to its new domain on the same lan as the current domain server. I plan to manually replicate the users and folder permissions. Once done, I plan to
remove the old server from the network and join the office computers to the new domain.
They also they are also running a legacy application that will require some tweaking by another tech. I have been hoping to prep the new domain prior to new legacy tech arriving. That is why I would like both domain to co-exist temporarily. I have read
that the major issues involved in this kind of temporary configuration will then be related to setting up dns. They are using the firewall to provide dhcp.
Are there any best practices documents for this situation?
Or is there a better or simpler strategy?
Gary Metz

I followed below two links. I think it should be the same even though the links are 2008 R2 migration steps.
http://kpytko.pl/active-directory-domain-services/adding-first-windows-server-2008-r2-domain-controller-within-windows-2003-network/
http://blog.zwiegnet.com/windows-server/migrate-server-2003-to-2008r2-active-directory-and-fsmo-roles/
Hope this help!

GR and GR reversal amount not same

Hi,
I'm using SAP ECC 6.0. The sequence of my posting:
PO Price = 1.32 / kg
Material Master = using standard price S
     Transaction     Quantity (KG)     Unit price (USD)     Value (USD)
1     IR receipt      1,320.00                             50.00                             66,000.00
2     GR       1,320.00                              50.00                             66,000.00
2     GR       48,680.00                                1.32                             64,257.60
     Total GR      50,000.00                              2.605                           130,257.60
4       Reverse IR (2)     -1,320.00                                                     -3,438.80     uses 2.605 unit price
5        Reverse GR     -50,000.00                                                     67,696.40
Since the GR and GR reversal amount is not equal , in the PO history the under the Goods receipt column there will be a balance value. Eventhough from FI perspective the GRIR account is balance but from the PO history view its not balance. What should we do to make sure the total Goods Recipt under PO history is zero value.
Please advise

Hi,
Actually I understand the system behaviour but my client's concern is how to make sure the Goods Receipt value column in PO history to be balance. What should we do so that the posting shows the zero balance for Goods Receipt?
THis is how the PO history view looks like:
                          101     50000kg       130,257.60 USD
                          102     50000kg         67,696.40- USD
Total Goods Receipt           0 kg          62, 561.20 USD
                           IR          1320kg       66,000   USD
                    IR reverse   1320kg        66,000 -USD
Total IR                                   0kg        0 USD
Eventhough I post IR and GR again but this outstanding values in GR will remain there. What kind of posting should we do?
Please assist.
Thanks

TS4006 How can i download icloud to my phone and change email acct not same with out deleting icloud

If i delete icloud from phone will i delete my info, i have an email I can't verify to down load.

Welcome to the Apple Community.
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

Virtual IP and server IPs on the same subnet?

Hi,
Is it possible to have the VIP and the IPs of the individual servers on the same subnet when the CSS is used in-line?
thanks a lot,
alec

Hi Alec,
this is only possible if you configure the CSS in "one-armed configuration mode". In other words the servers have to think, that the request is comming from the CSS so that the return flow is directed to the CSS and NOT to the client directly. In other words you have to use source-NAT done by source-groups or ACLs.
Kind regards,
Joerg

Design time and Server in separate Oracle Homes (QuickStart)

there seems to be a contradiction between the QuickStart guide from JEAN-PIERRE DIJCKS and the 9.2 Install and Config Guide on whether separate Oracle_Homes are needed if you install both on the same machine.
The QuickStart Guide says to use the same home, but the Install and Config Guide says to use separate homes (p 2-4 and 2-18).

You can install the design time and server components in the same home on the same machine. The Install Guide is incorrect and needs to be updated. I'll file a documentation bug.

Acrobat Javascript get Windows PDF creation time

Is there a way to get the Windows creation time of a PDF in Acrobat Javascript? When you copy a PDF the Windows creation time changes but the PDF creation time does not. I'm looking for a way to detect if someone copied the PDF.

I know you can get the PDF creation time through the info object but that isn't what I want. When you copy-paste a PDF in Windows the creation time of the info object doesn't change. It always stays the same so I can't detect a copy that way. I want the creation time that Windows provides. Is that possible?

Connection Problem while client is behind proxy and server out side proxy

hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
   public static void main(String args[]) {
      String data = "you are successfully connected with server.";
      try {
         ServerSocket srvs = new ServerSocket(1234);
         Socket skt = srvs.accept();
         System.out.print("Server has connected!\n");
         PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
         System.out.print("Sending string: '" + data + "\n");
         out.print(data);
         out.close();
         skt.close();
         srvs.close();
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
   public static void main(String args[]) {
     String host="61.17.212.29";
     int port=1234;
           String line;
     Properties properties = System.getProperties();
     /*properties.put("firewallSet", "true");
     properties.put("firewallHost", "192.168.0.1");
     properties.put("firewallPort", "808");*/
     properties.put("socksProxySet","true");
     properties.put("socksProxyHost", "192.168.0.1");
     properties.put("socksProxyPort", "1080");
     System.setProperties (properties);
     try {
     /*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
     Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
     Socket skt = new Socket(proxy);
     InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
     skt.connect(dest);*/
         System.out.println("before socket taken");
         Socket skt = new Socket(host,port);
         System.out.println("after socket taken");
         BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
         System.out.println("Received string: '");
         line = networkBin.readLine();     // Read one line
      while(true)
             System.out.println(line);     // Output the line
             line = networkBin.readLine(); // Read the next line, if any
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
     e.printStackTrace();
}

Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance.

Ticket creation time and server time is not same.

Similar Messages

Maybe you are looking for