Ticks on a timeline (without the slider)

If I want something exactly like the ticks on a timeline without having the slider or the slider bar (just the ticks) is there a object I can use? Possibly stealing a little from the JSlider?

Maybe this [url http://java.sun.com/docs/books/tutorial/uiswing/components/scrollpane.html]Ruler example will give you some ideas.

Similar Messages

I'm changing from powerpoint to Keynote. In powerpoint you can change slides by typing in the slide number and hitting enter. I want to do the same in keynote without the slide switcher popping up at the top. Possible?

I'm changing from powerpoint to Keynote. In powerpoint you can change slides by typing in the slide number and hitting enter. I want to do the same in keynote without the slide switcher popping up at the top. Possible?

Wow, I may be losing my mind, you're right. I guess I was doing what you said out of old habits and not even realizing it. Much appreciated.

DVCPro 50 letterboxed opening in my timeline without the letterboxing

Hi
I have a project with DVCPro 50 clips letterboxed and when I open them in my timeline the image fills the entire area becoming anamorphic. Do I have to use the distort option in the clips attributes? Or is there a setting to solve perhaps a different codec.
Thanks

Sounds like your sequence is set to Anamorphic.
In FCPs menu bar: Final Cut Pro > Easy Setup > DVCPro 50 > Setup.
Then, Sequence > Settings > Load Sequence Preset. DVCPro 50 should already be selected, click OK to confirm. Edit your clips into this sequence.

Moving a clip in timeline without the audio overwrite.

is there a way to move a clip in a busy timeline in a way that the audio will not overwrite another audio.
I'm dragging the video to a clear spot on a higher track but the audio part of the clip remains in the same track (which is occupied by another clip).
thanks
arikw

I found how to do.
you drag the video portion of the clip downward pass the bar separating video and audio track . the video will remain in video track 1 and the audio will move to a different track.
arikw

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Since upgrading to 10.1 the slider bar under the timeline has disappeared. How do i get it back?

The slider bar is no longer visible. When using the timeline I have to either use the zoom or the play head to navigate through my project.
Anyone know how to make it visible?

Tom,
thanks for the clarification. This had me totally stumped I wrote to Larry Jordan and he wasn't able to help. I have written back to him explaining your solution.

In the slide show timeline, how do I select a photo to crop?

In the slide show timeline, how do I select a photo to crop? Sometimes it lets me do it and sometimes I can't select the photo to do it. I'm not sure why the difference.

It's version 3.4.2, the latest. I can double click it, but then I'm out of the slideshow timeline and it's a hassle to quickly go back. I have to click on another place in my library and then go back to the slideshow and find my place in the timeline where I was. Many clicks. I just want to edit (enlarge and move the photo) in the timeline. Sometimes it works, but sometimes I can't get it to. Not sure if there's a "sweet" spot to click on for the photo in the timeline or what that I'm missing at times.

How do you structure a full flash website without the timeline?

Hello there. I was wondering how to build and structure a full flash website using the OOP approach. I have an idea of how to structure an application using the MVC design pattern, but I cannot put things together in order to structure a whole website.

I'm nowhere near an expert on this topic, and I suspect that the overall purpose of your site would help guide the best approach to designing and developing it without the timeline. I've done a lot of this with Flash for a limited purpose - creating a client clip that has only one frame, but responds to user events with dynamic behavior. My suggestion would be to take a look at some of the books that cover this topic to get a better idea of exactly how you'd like to deal with this project.
Two books are in my library that cover this topic - ActionScript 3.0 Design Patterns by Sanders & Cumaranatunge, published by O'Reilly & Associates, check it out at http://www.amazon.com/ActionScript-3-0-Design-Patterns-Programming/dp/0596528469/ref=sr_1_ 1?ie=UTF8&s=books&qid=1254149170&sr=8-1 as well as Advanced ActionScript 3 with Design Patterns by Lott and Patterson which can be found at http://www.amazon.com/Advanced-ActionScript-3-Design-Patterns/dp/0321426568/ref=sr_1_3?ie= UTF8&s=books&qid=1254149170&sr=8-3
Both books have a chapter on implementing an MVC design pattern with ActionScript and provide some basic examples you can build on. Sorry to be so meager in responding, I hope this might help a bit. Good luck!

When I switch on my brand new iPad it asks me to move the slide to begin set-up. A list of languages appear and I tick English and then next. Another list of languages appear but nothing else happens. I press Back and it goes back to the first list and a

When I switch on my new iPad it asks me to move the slider to begin set-up. A list of languages appears and I tick English then NEXT. Another list of languages appears and the only thing to do is press the home button or BACK. I press BACK and it returns to the first list. I press the home button and a message appears saying that SET-UP was not completed do you wish to retry or continue. I press CONTINUE and nothing happens I press RETRY and it goes back to the message. What am I doing wrong or do I need to connect to I-Tunes to set-up ?

Try to connect to iTunes during the setup.

Can I view the slide notes and timeline together?

I've finally gotten around to trying Captivate 5 after having used version 4 for a year or so. I noticed the interface changed where I have a choice of seeing the timeline or the notes. I'm used to seeing both together and I rather like it that way. Is this something I can control/change?
Thanks!

Hi there
Looks like if you click the Slide Notes tab and drag it up it will float. Maybe that will do what you want?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How do you render specific parts of timeline without rendering the whole sequence? cs5

New to CS5 Premiere pro, im trying to render certain sections of my timeline without rendering the whole timeline, in Avid you would just mark in and mark out the area you wanted to render, is there something similar to that or do you always have to render the whole timeline?

Place Work Area Bar over the part of the timeline you want to render and then hit Sequence/Render Whole Work Area.
If you mean Export also place work area bar over section and make sure in the export settings, Source Range (bottom left) is set to Work Area.

How do I pause a slide without the playbar?

Hi I am using Cap 6 and I do not have a playbar on my published project, I have a back and next button, how can allow the user to stop or pause the slide do I need some java script on a button?

You'll have to use the system variables cpCmndPause and cpCmndResume. More details about system variables in this blog post:
http://blog.lilybiri.com/system-variables-in-captivate-6
You can assign the action 'Assign cpCmndPause with 1' as Success action for the Pause button, but would recommend doing it with a standard, not with a simple action (anyway those variables are not available in the dropdown list of the Action accordion). And to play again it has to be 'Assign cpCmndResume with 1'
If you want it to be done with one button, create a conditioal action :
IF cpCmndPause = 1
Assign cpCmndResume with 1
ELSE
Assign cpCmndPause with 1
http://blog.lilybiri.com/why-choose-standard-over-simple-action
Lilybiri

How do I make the slide "pause" when there are multiple buttons present?

I'm creating a selection slide that will allow the user to click button 1, 2, 3 or 4 to jump to the first slide of a topic group or to click button 5 to exit. The slide should just "stop" until any of the buttons are clicked. Unfortunately, the slide ALWAYS goes to the jump for button 1 without waiting for any action.
I've tried adding an invisible click box and an invisible text field with no success.
What am I missing or doing incorrectly?
Thanks in advance for any guidance.

Hi there
Yep, I can click the image and it scales back up.
You need to look at the properties for your button objects. I can easily see on the timeline that you have apparently cleared the pause point for each of them. If they had a pause point, they might look like this:
Cheers... Rick

Enabling a button only after all other boxes on the slide have been clicked

Hi,
I am using Captivate 5 but I am fairly new to it and have very little scripting experience so I think what I am looking for is possible but I am not sure how to go about it!
I have a slide with 10 click boxes which each link to a different slide with further information. Once the user has visited the additional slide they return to the original slide and can continue working through the click boxes to discover all of the information. This first slide also has a back and a next button to enable navigation through the rest of the project.
Ideally I do not want to force people to click these boxes in a particular order and I do not want to prevent them visiting the additional pages more than once. However I would like to set up the page so that the next button will only be enabled once all of the click boxes have been pressed. At the moment, i do not have anything to stop the user just continuing through the project without reading the additional information.
Any help would be much appreciated.
Thanks,
Mary

Hi Lilybiri,
Thanks for your reply,
I think I would be able to use the second option of using buttons that became greyed out and then a next button appears on the slide once all of the pages have been visited. Would you be able to send me the template please?
I have a couple of other questions as well, I hope you don't mind! - Is it possible to do this using an image button rather than a transparent one or does this make it much more complicated? At the moment I have targets on the image which have a click box placed over them. It would be easy to change this to just the background image with the targets as image buttons but I am not sure I would be able to create the same style with the transparent button?
I would need to increase the number of variables to 10, if I follow the same naming conventions etc would this be a relatively simple process?
Finally I would not want the checkmarks to appear, how easy is it to make this change?
Sorry for all the questions but I really appreciate your help!
Mary

Using button to hide an image but to stay on the slide, can do?

Hi,
I want to use a button to hide an image but WITHOUT closing the slide.
I have set it up slide with two images and a button which "hides" one of the images,but the project continues onto the next action.
I have tried No Action but as soon as I click the Hide button, the project continues onto the next slide.
If I wanted to open a url of file I would be given the ability to overide "continue playing project".
Is there anything I am missing to tell the button to not continue with the project but to stay on the
slide I am on.
I have also added a button with "continue" in the hope of holding the slide but no luck.
Thanks in hope!!
grandpa70

Hi there
I have done this using an Advanced action. Basically you do the hide and show using the Advanced Action then reposition the playhead. I put a sample up this morning that would probably illustrate this. You may download it at the link below. It has a link at the end that allows you to download the .CP file so you can pick it apart to see what I did.
The example was simply to illustrate making a button available after a check box was selected. Basically the "check box" is two images. One is hidden and the other shown. Even though it was created for a different purpose, it still holds substantial value for illustrating what you want to do.
Click here to view
Hope this helps a smidge... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Ticks on a timeline (without the slider)

Similar Messages

Maybe you are looking for