Tie a control to a function?

Can somebody give a simple example of using a function to
show a total
of other controls that may or may not be filter from a master
array
collection?

Not sure what you are asking.
Tracy

Similar Messages

  • Nokia N76's headset remote control ain't functioni...

    The sound can be heard through the headphones but the problem is the headset's remote control ain't functioning at all. what is the problem and could anyone explain what are the functions of the 5 buttons located on the remote as there's no info on it? Does the headset function as a handsfree also? Thanks for replying..

    the battery is the CR 2032 what you need to do is ...
    remove the pin that goes through the clip at the back. then remove the plastic clip from the unit to revel a small star screw. remove the screw and then flick off the front of the unit. then remove the main board inside and take the battery out. put new batterry back in and put it back together.
    NOTE: the pin is very hard to get in and out of the clip to start and need to be done with great care or you will end up causing damage to the plastic and cant put the clip back on.
    i went to a few jewellery shops to see if they would do it for me but no luck which ment me doing it and now im having to have the control hanging rather then clipped onto my clothes.
    hope this helps and good luck with getting it sorted.
    i was also told taht if its under 12months (which the battery only last about 6 months) then you will be covered under the nokia guarantee, however they dont like to take responsabliaty for it!
    how stupid to have a unit with a battery that customers cant get to to change when needed...looks like just another way to keep their money comming in to them!
    CHRI$

  • Problem in adding "TableLayoutPanel" control array type functionality on windows form dynamically using drag and drop

    Environment: -
     (Application Machine)
    OS Name             : -
    Microsoft Windows 7 Professional/XP SP2/SP3            
    OS Bit Version      : -
    32 Bit                     
    Application Name: - Designer.exe                                  
    IDE                  
        : - Visual Studio 2008                        
    EXE Application development: -
    VB. Net
    Application Type: -
    Application “Designer.exe” was designed in vb6.0 and now, it has been upgraded to Visual Studio 2008 and it works properly.
    Product Description: -
                 We have an application Designer.exe, which is used for designing “Forms”.
    It has menu option with following option like Panel, Text Box, Combo Box, Button etc. We drag any of this menu items and place it to form.
    Requirement: -
    We have
    critical requirement in product. In Designer.exe, we need to align form margin, while we increase or decrease window. And for that we have searched that 
     “TableLayoutPanel” components can be helpful.
    Problem description: -
    Earlier code was in vb6.0, now it has upgraded to Visual Studio 2008. In vb6.0, we have used control array for memory utilization with Combo Box, Group Box, and Text
    Box etc.
    But, for alignment we have to use “TableLayoutPanel”
    control array type functionality on form.
    Code Snippet: - For earlier designing component e.g. Frame
    'Required by the Windows Form Designer
    Public WithEvents Frame1 As Microsoft.VisualBasic.Compatibility.VB6.GroupBoxArray
    <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
    Me.components = New System.ComponentModel.Container
    Me.Frame1 = New Microsoft.VisualBasic.Compatibility.VB6.GroupBoxArray(Me.components)
    CType(Me.Frame1, System.ComponentModel.ISupportInitialize).BeginInit()
    . Kindly suggest approach for implementing requirement.
    Kindly help us to complete the requirement. I will be really
    thankful for any assistance.

    Hi S.P Singh,
    Welcome to MSDN.
    I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
    Where to post your VB 6 questions
    You could consider posting this issue in these forums below:
    These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
    VB Forums
    VB City
    Thanks for your understanding.
    Best Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Control panel and Function panel are empty

    The Control Panel and Functions Palettes are both blank. How do I repropagate the panels with all related icons? LabVIEW repair does not repropagate panels. Thank You!

    Did the palettes ever have something in them, or is this a new install.
    First try just selecting a different menu setup. This should tell us if it's a bad menu file or all the vi.lib files have disappeared.
    If that doesn't do it, open your file browser and navigate to "...National Instrument/LabVIEW X.X/vi.lib" and look in the sub directories and see if there are any files. Most of what's in the palettes comes from the vi.lib directory. If there's nothing in there, I'd do a complete uninstall, then reinstall and see of that takes care of it.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • MP4 video poster controls no longer functioning.

    MP4 video poster controls no longer functioning. Video loops back to the beginning even though the settings are to stop at the last frame. Also video is pausing on tap yet i have the 'Do Not Allow Pause' checked.
    Double checked the publish setting and it's set to v23, which when these features were released.
    Previous folios (published before v25) are working fine but new one using v25 tools is not working.

    Stop at Last Frame works fine for me using the v25 tools.
    Open your folio properties and make sure that v25 is selected. Then update the article containing the video. (In some cases, you can have a folio in one version with articles in a previous version if they haven't been updated.)
    Let us know how that goes.

  • How to control sequence of Function Modules processed in update task?

    Hello,
    I've some questions regarding following process that needs to be extended: a Function Module (FM) 'Save' calls several other FM e.g. 'X1' and 'X2' in update task. Those update modules are independent from each other and write data to the database that finalize the save process.
    Now a third FM 'X3' needs to be called in update task. This one is also independent from 'X1' and 'X2' but it calls a further FM 'X4' in background task as separate unit which starts a job. This job  requires the data from FM 'X1' and 'X2' already persistent on the database. By the way: the FM 'X3' triggers the Access Control Engine (ACE) notification that calculates the authorization data in the mentioned job. Therefore this process needs to be the last FM call in update task in the queue of calls in FM 'Save'.
    Questions:
    (1) Is it possible to control the process sequence of the FM 'in update task' simply by the sequence they are called in FM 'Save'.
    (2) Presumed that all FM beside 'X3' have processing type "Update with immediate start" or "Immediate start, no restart" (in short  V1) would it be another solution to specify FM 'X3' with type 'Delayed' to control the process sequence? When a delayed FM will be processed?
    (3) Is it uncritical to call in FM 'X3' (already running in update task) the FM 'X4' with addition in background task as separate unit  that furthermore starts a job by an event? I'm afraid that this nesting could lead to unexpected errors.
    Thank you in advance for your help!
    Best regards,
    Oliver

    ya it will this be in  the same sequence only...........
    Regards
    Anbu

  • E1200 Parental control seems not functioning well...

    Hello, friends,
    I have a LinkSys E1200 wireless router at home. I set up the parental control, limiting the internet access between 8am - 11pm only. However, to my surprise, my son can still use the facebook to chat with his friends after 11:00pm! I found this a few times!!
    I thought he downloaded some software so as to get around the router settings. However, he denied he did anything. While, with the other laptop, which is used by my daughter, the limited-internet-access-time-interval works fine: between 8am - 11pm only.
    Any ideas? Thanks a lot.

    Unfortuneately the web-based setup page doesn't give me that option. I have an E1200 Router, Firmware V2.0.04 and there is an "Access Policy" menu with the only sub-option of "Parental Control". There isn't an "Access Restrictions" menu with multiple options containing "Internet Access Policy". I verified that V2.0.04 is the latest firmware update, why do I not have this functionality?
    I appreciate the quick response and offer to help.

  • Microsoft Date Picker control unexpectedly stops functioning in Outlook 2010

    We have a long-standing Outlook VBA project that has unexpectedly stopped functioning with the error message "Object library invalid or contains references to object definitions that could not be found".
    We have traced the problem to the 'Microsoft Date/Time Picker' control.  We have successfully unregistered and re-registered both the MSCOMCTL.OCX and MSCOMCT2.OCX files in the C:\Windows\SysWOW64 folder with administrative privileges.  However,
    when using the free NirSoft RegDLLView utility, neither of the Microsoft common control files above shows as registered.  Furthermore, if we try to use the NirSoft RegDLLView utility to register these files, we receive an unknown error
    message, unlike the successful registration using the Windows Regsvr32 utility.
    Can someone please help us understand why the files appear to register properly, but apparently are not actually registered?
    Is there a way to scan these files for corruption or replace them with fresh versions?

    Thank you for the reply, Amy.  Being a novice and forced into this discussion by our malfunctioning Outlook 2010 project, we have a couple other questions, if you don't mind.
    FIRST, both the common control downloads refer to users of Microsoft Visual Basic 6.0, Visual Studio 6.0., or Microsoft Office Developer XP.  We don't own any of these standalone packages, so do we have them installed as a result of
    being Microsoft Office 2010 users?  There is never any mention of Office 2010 in any of the download descriptions or even other office suites.
    SECOND, is one file an older file and the other a newer file?  Neither shows requirements or makes mention of Microsoft Windows 7.0 (64-bit), which we are using.  But the MSCOMCTL.OCX download does list required operating systems
    up to Windows XP.  Which do we need and why don't they refer to newer operating systems?
    THIRD, the downloads also talk about discontinued support for Microsoft Visual Basic 6.0 and that the MSCOMCT2.OCX file is no longer included with Microsoft XP Developer.  What is the significance of all this, these files apparently
    shipped with our version of Microsoft Office 2010.  What replaces these controls if they are out-dated?
    As you can tell, we are advanced enough to dabble in some VBA projects, forms, and macros, but are totally confused by the mixed signals sent by these types of articles.  If we want to continue developing projects how do know what path to
    follow so we don't end up with antiquated controls or other outdated elements?  Or, are these files really even outdated?  Thank you for any enlightenment. 

  • Tree Control Double Click Functionality

    Hi All,
    I'm trying to get a tree control to operate a case structure, and I cannot seem to get the Double Click invoke node to output my tags from the tree.   Anyone know what I may be doing wrong?!
    Thanks,
    Derek
    Solved!
    Go to Solution.
    Attachments:
    TreeControl.vi ‏9 KB

    Identical functionality as an event loop shown for an additional example
    Jeff
    Attachments:
    TreeControl[1] rev 1.vi ‏9 KB

  • Checkbox (only) controls open/close function of collapsible panel

    I have a form with several collapsible panels in it, each
    with a checkbox in the tab area, like so:
    <div id="CollapsiblePanel1" class="CollapsiblePanel">
    <div class="CollapsiblePanelTab" tabindex="0">
    <input type="checkbox" name="checkbox_array[]"
    value="i_need_this" />
    I need this!
    </div>
    <div
    class="CollapsiblePanelContent">Content</div>
    </div>
    My question is this: Is there any way to control the
    open/close function of the collapsible panel using only the
    checkbox located within the tab? Ideally, the panel would still
    change based on hover, focus, etc.
    In advance, let me just say thank you so much for any help
    you might provide with this.
    - Devin

    Yessir, it is possible. I was struggling with something
    similar myself, and got it figured out. You'll need to do this in
    two steps.
    First, you should disable the existing listener, so that when
    you click the tab area nothing happens. You'll need to wade into
    your SpryCollapsiblePanel.js file and comment out a line. Somewhere
    around line 191 you'll find a function called
    "Spry.Widget.CollapsiblePanel.prototype.attachPanelHandlers".
    Within that function, around line 198, you'll find the following
    code:
    quote:
    Spry.Widget.CollapsiblePanel.addEventListener(tab, "click",
    function(e) { return self.onTabClick(); }, false);
    Comment it out by typing a double forward slash (//) at the
    beginning of the line like this:
    quote:
    // Spry.Widget.CollapsiblePanel.addEventListener(tab,
    "click", function(e) { return self.onTabClick(); }, false);
    If you test your code at this point, you'll discover that
    you've broken the collapsible panel functionality. The panel won't
    open. Now you need to set up your checkbox to trigger the
    open/close functions. To do this, you just need to add an onclick
    event to your checkbox like this:
    quote:
    <input type="checkbox" name="checkbox_array[]"
    value="i_need_this"
    onclick="CollapsiblePanel1.onTabClick();" />
    The onTabClick() function simply checks if the panel is
    already open, and calls either the open() or close() function as
    appropriate. If you needed to, you could check whether the checkbox
    is checked or not, then call the open() or close() functions
    directly.
    Please note that in modifying your SpryCollapsiblePanel.js
    file like this, you'll be modifying the behavior of all collapsible
    panels built using that file. If you need standard collapsible
    panels as well, you'll need to add the same onclick event to your
    tab panels manually.

  • Volume control gray not functioning

    Mac Mini master volume control is gray and not functioning.  Currently running OSX 10.7.5, any thoughts on how to reset this function.  CoreAudio Quit/reset did not work.

    Hello CraigFam,
    Resetting your Mac Mini's SMC and NVRAM may help restore functionality to its audio out.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Additionally, if your Mac Mini has optical audio out capability, the information detailed in the article below may be helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers,
    Allen

  • Dynamic Link from Premiere to After Effects causing 'Zoom' controls not to function...

    I'm using Premiere Pro CS5 with a Dynamic link to an After Effects CS5 composition and I'm having some real issues with zoom control (once I'm in AE). When I run the composition 1 or 2 times the zoom function (ctrl +/-) will work, but after a few run through's it doesn't function at all. Even trying to manually change the zoom by clicking won't work. This happens EVERY time I use a dynamic link -- anyone else having this issue? (It also won't allow me to render... but I can see my comp move when I scrub through with the mouse).
    Also, when I create the same composition w/o the dynamic link everything works perfectly... (I just don't want to have to re-render it out... which is why I would like Dynamic Link to work properly).
    Here's what I'm running;
    Windows 7 Pro - 64bit
    Core i7-960
    24GB DDR3
    x2 300GB 10k RPM HD
    ATI 4790 1GB
    Thanks,
    Drew

    Mylenium, Todd,
    Thanks for your suggestions. I've updated all of my 3rd party software drivers, as well as AECS5 and it seemed to work... for an extra 10 minutes. I ended up turning off OpenGL (as directed above) and that has seemed to help as well (although render playback seems to suffer). I will test for another few hours and hopefully it will continue to work.
    I was also able to replicate the problem on my laptop with the same proceedures... perhaps it's the ATI card that's causing the issue... but it doesn't seem to be a one-time event. (Although it's causing my laptop to crash now mid-render).
    Cheers,
    D

  • How to take back the control from RFC function module to calling program

    Hi,
    In our system landscape, more than 200 child systems are connected to Solution manager(SMP). I have copied a RFC enabled function module into all the child systems and calling that FM from Sol Man in sychronous mode.
    Here goes my code in SolMan.
    LOOP AT it_dest INTO wa_dest.
      CALL FUNCTION 'Z_GET_LOGIN_DETAILS' DESTINATION wa_dest-rfcdest
        EXPORTING
          date_fr               = s_date-low
          date_to               = s_date-high
        TABLES
          tab_data              = it_val
        EXCEPTIONS
          communication_failure = 1
          system_failure        = 2
          OTHERS                = 3.
      IF sy-subrc EQ 0.
    *     Updates zuserlogon
          MODIFY zt_logon_det FROM TABLE it_val.
          COMMIT WORK.
          WRITE:/'RFC for Destination', wa_dest-rfcdest, 'succesfully updated.'.
      ELSE.
          WRITE:/'RFC for Destination', wa_dest-rfcdest, ' failed.'.
      ENDIF.
    ENDLOOP.
    Few child systems are very slow & takes more than 20 minutes(Many of the times system hangs) to return the result. But I should not wait for so long. Even if the child system doesn't return any values in 5 minutes I shoud continue with other system ignoring the current one.
    I tried calling the FM in asynchronous mode(STARTING NEW TASK) but no success because only 6 DIA processes possible but as I said I have more than 200 systems connected to SolMan.
    Please help me resolving this problem.
    Thanks,
    Prathap

    If there are only few child systems with bad response time, use asynchronous call using a CALL FUNCTION func STARTING NEW TASK task DESTINATION dest PERFORMING subr or CALLING meth ON END OF TASK. Count asynchronous calls still running/waiting (increment a counter when creating a task (not the one used for task id). In the form/method performed at end of a call decrement the counter. When counter is lower than a limit, 4-5 if 6 processes (*), perform an asynchronous call else perform a synchronous call or wait until the counter falls below the limit.
    Regards,
    Raymond
    (*) Use SPBT_INITIALIZE at start of program to get actual number of free/available processes.

  • How to control iteration of function module in generic extraction to BW

    Hi Experts,
       I am customizing standard Function module RSAX_BIW_GET_DATA_SIMPLE. My problem is, while excecuting datasource in RSA3, my function module is repeating many times.....example if my FM fetches data of 70 records.......FM is repeating 70* n times while executing it in a data source.
    How to contol this loop?
    Can anyone please help me.

    Hi,
    This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server.  There is no way , by which you can process presentation server files in background mode.
    Regards
    Vinod

  • Control-Eject combo function

    I've got this new keyboard which is to me the best keyboard I've ever used.
    However I have to get used to some changes, such as the command key being replaced by the super key. Or volume not working properly. Stuff like that.
    But what I definetly want is the Control-Eject combo key that prompt you with Restart, Sleep, Cancel or Shutdown options. I'm trying to find out HOW can I actually prompt the message, using a command or some kind of keyboard emulation, then use it with Quicksilver (useful piece of software for creating and using macros and much much more).
    The problem I have is I have no idea what triggers this pop-up in the system. Is it a system event? Is it some sort of special "character" that the keyboard sends? Does anyone have any idea about it?
    Note: I heard and verified that this Control-Eject combo doesn't work on any slim aluminium keyboard, only on the older white ones. This lead me to think it's some sort of special command the keyboard sends ...
    Thanks!

    It works OK on my full-width wired flat keyboard, though the eject key isn't in the top right-hand corner but between F12 and F13. However if you have a Windows keyboard it probably doesn't have an eject key, so you are stuck as there doesn't seem to be any other combination to do this.
    You could go to System Preferences>Keybord and Mouse>Keyboard Shortcuts and assign keystrokes to the Apple menu Restart, Sleep and Shut Down items.

Maybe you are looking for