Tier-2 Storage Sanity Check

Also posted on xsanity...
Hello All,
Just wanna check myself here.
We currently have the following setup that we wanna add some tier-2 storage to. On an ongoing basis, there is large amounts of data that will most likely get archived and deleted in the coming months. It doesn't need to be sitting on new, fast drives:
XSAN 2.1.1
Promise head-unit with expansion chasis (16+tb usable space)
QLogic 5600
I also have an old xServe RAID filled with 250gb drives and an xServe RAID filled with 500gb drives. I don't want to add this to the existing volume. I'd like to present a new volume so my users can use this as a temporary holding tank for large amounts of data that doesn't get accessed very often (or ever) and will be archived then deleted on a regular basis.
My plan is:
Storage pool #1 (250gb chasis): left side metadata with some spares; right side 6-disk raid 5 lun with a spare.
Storage pool #2 (500gb chasis): both sides 6-disk raid 5 with a spare (data striped).
Questions:
1. Is it a problem that my 500gb RAID chasis only has 2 luns (and not 4)? I'm guessing that the 4-lun/storage pool recommendation is for speed which I'm not terribly concerned about.
2. I have a QLogic 5200 that doesn't have the 10gbit ports licensed. I'd like to plug the RAIDs into the 5200 and then connect that to 2 available ports on my 5600 where the clients live. Can this be done? Is there anything special I need to know.
Thanks in advance for any help.
Best,
Greg

Greg,
This is how I would recommend doing this:
1. You are going to create a completely separate volume.
a). The metadata LUN for this volume will be host on the left side of the 250GB RAID. This will be a single RAID 1 LUN.
b). The right side of the 250GB RAID will not host a SAN LUN but will be a RAID 5- 6-Drive LUN that is directly attached or zoned to one of your servers. This will be an HFS+ volume and could be used for home directories, or other AFP-based shared storage.
c). You will create two 6-Drive RAID-5 LUNs on the 500GB RAID.
d). You will create a new volume for file services made up of your two new LUNs from the 500GB RAID and the metadata LUN from the 250 GB RAID.
As for the QLogics, yes you can connect the two units via SFP ports.
Good Luck,
Bob

Similar Messages

GET_FILE Error: java.lang.reflect.InvocationTargetException when moving content from tier1 to tier 2 storage

Purpose: to migrate all the ACTIVE records from tier1 storage to tier 2 storage.
A have applied MLR 11 patch i.e Patch 20624268: WEBCENTER CONTENT BUNDLE PATCH 11.1.1.8.11
My Configurations
Tier 1 intradoc.cfg configuration
VaultDir=/u01/app/oracle/oracle/product/11.1.8/fmw/user_projects/domains/wcc_domain/ucm/cs/vault/
WeblayoutDir=/u01/app/oracle/oracle/product/11.1.8/fmw/user_projects/domains/wcc_domain/ucm/cs/weblayout/
I then changed the above parameters from TIer 1 to Tier2 as follows
VaultDir=/u01/tier1_storage/vault
WeblayoutDir=/u01/tier1_storage/weblayout
Then rebooted the machine. Now when i try to search for all the older records which were stored on Tier 1 above using GET_FILE
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://www.oracle.com/UCM">
<ns1:GenericRequest webKey="cs">
<ns1:Service IdcService="GET_FILE">
<ns1:Document>
<ns1:Field name="dDocName">OWCDEV_004521</ns1:Field>
<ns1:Field name="RevisionSelectionMethod">Latest</ns1:Field>
</ns1:Document>
</ns1:Service>
</ns1:GenericRequest>
</soap:Body>
</soap:Envelope>
I Get following error
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<ns2:GenericResponse webKey="cs" xmlns:ns2="http://www.oracle.com/UCM">
<ns2:Service IdcService="GET_FILE">
<ns2:Document>
<ns2:Field name="error">Error: java.lang.reflect.InvocationTargetException</ns2:Field>
</ns2:Document>
</ns2:Service>
</ns2:GenericResponse>
</env:Body>
</env:Envelope>
Problem
The biggest problem is that i am not able to search older records which are stored in tier1 storage using GET_FILE, But if i check in new records to Tier2 i am able to use GET_FILE to search them. I must be able to search both Tier1 and Tier 2 Storage content files using GET_FILE. To reproduce the error, change the vault and weblayout path from intradoc.cfg,reboot then try to use GET_FILE to search for records on the previous path, then the you will get the above error. I tried to create partition and storage rules but i am not successfull. I am not so sure exactly what to change here. Please advice

Hi 2611729
For searching content items service is GET_SEARCH_RESULTS and for downloading the file its GET_FILE
I dont think changing the configuration value will serve the prupose over here. You need to move the contents from one location to other and going by the explanation you have provided that movement has not happened. Every content item has a metadata called xStorageRule which mentions the location where file is stored. In your case, though you've changed the configuration setting the metadata value is still of tier1 for older content items.
You have changed the default value and thats the reason contents are getting stored in tier2 storage now and you are able to access them via search. Since for older items xStorageRule holds older value which is different that current one you are not able to search.
However, i belive you're trying to move the contents from tier1 to tier2 storage since contents in tier1 storage have crossed X days and might not be accessed frequently by users.
Below mentioned option might work.
Retain your configuration setting for valut and weblayout as earlier.
1. Create a new storage rule Tier2Rule pointing to tier2
2. Archive your contents using Archiver applet.
3. Import the contents from created archive using applet and during import change the metadata xStorageRule to new storage rule Tier2Rule. This moves all your content onto tier2.
4. Checkin new documents and it gets stored in tier1 location. I assume default storage rule will point to tier1.
5. While searching using seach forms use the metadata StorageRule and it will provide dropdown of list (like tier1rule, tier2rule and so on). Select and perform the search.
For download using GET_FILE, i'm not sure whether by passing xStorageRule it will work or not. You'll have to try it out by small POC or customize the GET_FILE as required.
I've not tried this approach earlier but by system-wise understanding it should work.
Also, please refer UCM Backup strategy this discussion thread and others in the forum. Take a look at SAM-QFS which does this job transparently or any other solution in-line to that.

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

Bailout: failed spill-split-recycle sanity check

hi all
i hope someone can help me!
we have an enterprise portals productive installation on aix5.3
it is based on netweaver 7.0
i have just installed a java dialog instance on a windows 2003 server 64 bit which is happily talking to the central instance on aix BUT after changing the java parameters (sapnote 723909) for this new instance, the local windows dev_server0 file now complains with the following error:
JHVM_BuildArgumentList: main method arguments of node server0
210       com.sap.engine.core.configuration.impl.addons.PropertyName::init (154 bytes)
211 !    com.sap.engine.core.configuration.impl.cache.CachedConfiguration::prepareRead (167 bytes)
212       java.util.AbstractCollection::toArray (68 bytes)
213       com.sap.engine.lib.xml.dom.DOMDocHandler1::onCustomEvent (130 bytes)
214       com.sap.engine.lib.xml.dom.DOMDocHandler1::charData (73 bytes)
Bailout: failed spill-split-recycle sanity check
211   COMPILE FAILED
(there are many lines but i have just included one occurrence)
i just wondered if anyone could tell me which java parameter could have caused this?
i appreciate i could take out each parameter one by one and stop/start the instance to see when it stops complaining (and i will do this if no-one can help me)
many thanks
kirsty

ok,
i guess it was obvious really.....
the flag: -XX:+PrintCompilation (which excludes certain classes from compiling in order to prevent possible server VM crashes) is recommended in note 723909 to help avoid crashes caused by certain classes.
the thing is this flag seems to cause the class to fail a sanity check in order to stop it compiling which then writes out to the server log causing me unnecessary anguish.
if the flag is there to prevent classes compiling it should do it cleanly and quietly so im not sure now whether i want it or not!!!
anyway, apologies for anyone's time i wasted
kirsty

Xnee-2.00 Installation - /lib/cpp fails sanity check

When I first tried running the configure file to start the installation process for this application, I ran into error after error and found solutions to them by installing packages off the SunOS cd's or from the sunfreeware site. But I cant find a solution to this problem.
the output when running the configure script is as follows for the problem:
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
the config.log file is very long and full of compile errors...many are repeats and around the part where its failing the only problem i can see is a "conftest.c" line 14: Cant find include file assert.h....
what are the packages i need for cpp to function, i have gcc-3.3.2 installed, are there others?? is there something else i'm going to run into later?? any help will be greatly appreciated

Have you try to use pkg-get
to get the binary from Sun?
If you really need to compile it by yourself, get studio first to make it easier. It will install developer package library in the box and help to resolve your dependence problem.

Need info on BW system sanity check

Hi ,
I am new to this Area,
can any one tell me what is the BMW system sanity check?
when we need to do this check?
on what BW system we need to do this?
Is there any pre defined steps we need to follow on sanity check?
Is there any check list available for sanity check?
Points will be assigned for your feed back.

Hi Lakshmi,
Go to transaction code RSRV and see the test available there.
Also read documentation available for each test , it is self explainatory.
hope it helps
Regards
Vikash

Storage section check indicator -- ID & Pick point

Dear Gurus ,
1. I have defined new storage type with NO storage section check. then maintained material with storage type indicaor.with storage type search strategy only.
in this case the system does not suggest the bin or even storage type.
But if i maintain the storage section indicator & section search strategy then the system proposing Bin while creating TO.
Then what is the use of deactivating the storage section check while defining the storage type??
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
Is it mean that the perticular material from storage type can be only picked or putaway from the
storage type that is assighned ID or pick point?
If yes in which scenario it will be utilised or how it works?

What are the other influencing factors you have set for your storage type search? For example stock status, WPC? Activity - E or A or 2-step?
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
See here for ID point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f846b74afa11d182b90000e829fbfe/frameset.htm
and here for Pick Point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm

Db sanity check

Hi All,
I would like to develop sanity check script for our product Oracle Db.
It should be put on crontab, worked periodically.
How can I retrieve simple pl/sql query(for example how many connections and user..) elapsed time?. Is it possible to achieve this goal by using UNIX scripts(perl, bash etc..) and specific pl/sql statement or have I write to application with java or C?

Bash and Sql can be used for that, but you should clarify a bit more what you want to do. Here a small example :
$ cat users.sql
col username for a20
select sid, serial#, username, to_char(logon_time,'dd/mm/yyyy hh24:mi:ss') logon_time,
        to_number(sysdate - logon_time)*1440 elapsed_minutes
from v$session
where username is not null
order by username, logon_time
exit
$ sqlplus -s / as sysdba @users
       SID    SERIAL# USERNAME             LOGON_TIME          ELAPSED_MINUTES
       144         38 SCOTT                02/04/2006 15:18:10      21.6666667
       142         14 SCOTT                02/04/2006 15:28:41           11.15
       143        105 SYS                  02/04/2006 15:39:50               0
       159        113 TEST                 02/04/2006 15:18:43      21.1166667
$

Glibc 2.19 & find: sanity check of the fnmatch() library function fail

Since yesterdays update to glibc 2.19, find doesn't like searches by name. The update threw a hole lot of segmentations faults
[2014-02-12 15:06] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-12 15:06] [PACMAN] synchronizing package lists
[2014-02-12 15:07] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-12 15:07] [PACMAN] starting full system upgrade
[2014-02-12 15:08] [PACMAN] upgraded apr-util (1.5.3-1 -> 1.5.3-2)
[2014-02-12 15:08] [PACMAN] upgraded linux-api-headers (3.12.4-1 -> 3.13.2-1)
[2014-02-12 15:08] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generating locales...
[2014-02-12 15:08] [ALPM-SCRIPTLET] de_DE.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] en_US.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generation complete.
[2014-02-12 15:08] [PACMAN] upgraded glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded binutils (2.24-1 -> 2.24-2)
[2014-02-12 15:08] [PACMAN] upgraded gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded gcc (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded shared-mime-info (1.2-1 -> 1.2-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_Zt9oRn/.INSTALL: line 1: 10554 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdelibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-mobipocket (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-core (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kactivities (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kde-base-artwork (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded oxygen-icons (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_lNExqJ/.INSTALL: line 1: 10562 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-runtime (4.12.1-3 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-lib (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-widgets (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-dolphin (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-konsole (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-plasma (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_jc0NOD/.INSTALL: line 1: 10571 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdepim-runtime (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_9emqkf/.INSTALL: line 10: 10582 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-workspace (4.11.6-1 -> 4.11.6-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_HVYliW/.INSTALL: line 1: 10587 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkipi (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_JMyH2D/.INSTALL: line 1: 10591 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-gwenview (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_BOmkIm/.INSTALL: line 1: 10595 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-kcolorchooser (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_V9lYA5/.INSTALL: line 1: 10598 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-ksnapshot (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded libkexiv2 (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_NKbRqP/.INSTALL: line 1: 10602 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-okular (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_1CccYz/.INSTALL: line 1: 10606 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkdcraw (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-thumbnailers (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_PRYdSk/.INSTALL: line 1: 10609 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-kmix (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdepimlibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdeutils-ark (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded libsasl (2.1.26-6 -> 2.1.26-7)
[2014-02-12 15:08] [PACMAN] upgraded mpd (0.18.7-1 -> 0.18.8-1)
[2014-02-12 15:08] [PACMAN] upgraded nginx (1.4.4-2 -> 1.4.5-1)
[2014-02-12 15:08] [PACMAN] upgraded openjpeg (1.5.1-1 -> 1.5.1-2)
[2014-02-12 15:08] [PACMAN] upgraded pam (1.1.8-2 -> 1.1.8-3)
[2014-02-12 15:08] [PACMAN] upgraded python2-numpy (1.8.0-1 -> 1.8.0-2)
[2014-02-12 15:08] [PACMAN] upgraded redland (1:1.0.17-1 -> 1:1.0.17-2)
[2014-02-12 15:08] [PACMAN] upgraded s-nail (14.5.2-3 -> 14.5.2-4)
[2014-02-12 15:08] [PACMAN] upgraded sudo (1.8.9.p4-1 -> 1.8.9.p5-1)
[2014-02-12 15:08] [PACMAN] upgraded systemd (208-10 -> 208-11)
[2014-02-12 15:08] [PACMAN] upgraded systemd-sysvcompat (208-10 -> 208-11)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_7YRIvT/.INSTALL: line 10: 10659 Segmentation fault (core dumped) mkfontdir usr/share/fonts/local
[2014-02-12 15:08] [PACMAN] upgraded terminus-font (4.38-3 -> 4.38-4)
[2014-02-12 15:08] [PACMAN] upgraded vim-systemd (20130410-1 -> 20140209-1)
[2014-02-12 15:08] [PACMAN] upgraded whois (5.1.0-1 -> 5.1.1-1)
[2014-02-12 15:08] [PACMAN] upgraded xdg-utils (1.1.0.git20140109-1 -> 1.1.0.git20140207-1)
[2014-02-12 15:08] [PACMAN] upgraded xf86-video-intel (2.99.909-2 -> 2.99.910-1)
After that nearly all applications segfaulted but somehow it everything works again. Except for find (which I only recognized after mkinitcpio destroyed my initramfs......):
# find -name \*.pkg.tar.xz
find: sanity check of the fnmatch() library function failed.
Regex, type and all other operators work as expected:
# find -regex '.*\.pkg\.tar\.xz'
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
# find -type d
# pacman -Q findutils glibc
findutils 4.4.2-5
glibc 2.19-1
First is suspected it to be a locale issue, but everything seems to be fine:
# diff -u0 {,/}etc/locale.gen
--- etc/locale.gen 2014-02-07 23:56:45.000000000 +0100
+++ /etc/locale.gen 2014-02-12 19:43:03.037279970 +0100
@@ -124 +124 @@
-#de_DE.UTF-8 UTF-8
+de_DE.UTF-8 UTF-8
@@ -161 +161 @@
-#en_US.UTF-8 UTF-8
+en_US.UTF-8 UTF-8
# locale-gen
Generating locales...
de_DE.UTF-8
en_US.UTF-8
Generation complete.
Downgrading to glibc 2.18-12 solved the problem for now...
# pacman -U --noprogressbar --noconfirm *
loading packages...
warning: downgrading package binutils (2.24-2 => 2.24-1)
warning: downgrading package gcc (4.8.2-8 => 4.8.2-7)
warning: downgrading package gcc-libs (4.8.2-8 => 4.8.2-7)
warning: downgrading package glibc (2.19-1 => 2.18-12)
resolving dependencies...
looking for inter-conflicts...
Packages (4): binutils-2.24-1 gcc-4.8.2-7 gcc-libs-4.8.2-7 glibc-2.18-12
Total Installed Size: 134.89 MiB
Net Upgrade Size: -0.42 MiB
:: Proceed with installation? [Y/n]
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
downgrading glibc...
warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
downgrading binutils...
downgrading gcc-libs...
downgrading gcc...
# find -name \*.pkg.tar.xz
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
According to the findutils manual one should file a bug report for this message, but I don't think they expect glibc to be the buggy implementation of fnmatch that looks enough like the GNU version to fool configure, but which doesn't work properly.
Does anybody experience similar problems? Does anybody have suggestions how to solve this?
Last edited by auti (2014-02-13 22:14:12)

I've regenerated the locales multiple times but only the upgrade to findutils 4.5.12 worked.
glibc 2.19-2 works with the current findutils.
But if a corrupt locale archive file caused this, why didn't findutils 4.5.12 complained about this?
Anyhow: It works, I'm happy; thanks for your effort, Allan!

Sanity check - migrating library to new mac

I'm migrating to a new machine and will use the opportunity to do a fresh install of Aperture. I'd be grateful for a reminder / sanity check on how to migrate my data / settings after the install:
All I need to do (after Aperture is installed, updated and checked) is replace the default library file with my Aperture library from my previous machine and start Aperture ?
My library includes both local and referenced (to a network drive) masters. Am I likely to need to re-establish connection with all of the referenced masters ?
What about keywords and other preferences ? Can someone remind me where these live and what needs to be moved ?
Many thanks.
Paul

macpaul11 wrote:
I'm migrating to a new machine and will use the opportunity to do a fresh install of Aperture.
Yes, it is important to do a fresh install of all apps rather than "migrate" apps. Repair Permissions immediately before and immediately after each installation.
All I need to do (after Aperture is installed, updated and checked) is replace the default library file with my Aperture library from my previous machine and start Aperture ?
Correct.
My library includes both local and referenced (to a network drive) masters. Am I likely to need to re-establish connection with all of the referenced masters ?
No, Aperture should handle that.
What about keywords and other preferences ? Can someone remind me where these live and what needs to be moved ?
Again, Aperture should handle that.
Good luck!
-Allen Wicks

Hot to configure sanity-checks ?

Hi All
I went through the support files and found such kind of log messages during peak hours as below,
2010-07-11 11:55:47 | INFO | CPU #000 | Started filtering packets of type 'TCP Non-SYN' received on interface # 0. Reason: Started filtering due to attack detection
2010-07-11 12:00:35 | INFO | CPU #000 | Started filtering packets of type 'TCP No-SYN + RST' received on interface # 0. Reason: Started filtering due to attack detection
2010-07-11 13:07:25 | INFO | CPU #000 | Stopped filtering packets of type 'TCP No-SYN + RST' received on interface # 0. Reason: Stopped filtering for an administrative pause
Basically those logs mean that SCE detect attacks and then in order to protect itself, it put those attack traffic in filter, one hour later, SCE remove the flows from filter and check again, if attack persist, SCE put attack traffic in filter again.
Could we decrease the time for filtering traffic ? like 10 minutes ?

Hello,
I believe this is what you're looking for:
SCE8000#>configure
SCE8000(config)#>interface LineCard 0
SCE8000(config if)#>sanity-checks attack-filter times filtering-cycle max-attack-time
SCE8000#>show interface LineCard 0 sanity-checks attack-filter times
Filtering cycle: 3600 seconds.
Max attack time: 86400 seconds.
Hope that helps,
Best regards.

MPLS Sanity-check

Hi,
I need someone to do a sanity check on a MPLS design.
I doing some consulting in a expanding metronet, in Sweden.
I've got the need to run ethernet over ATM, so I'm thinking EoMPLS. So my query, is it possible to run EoMPLS over the following
configuration. If so, can I also runs q-in-q (if I reconfigure the MTU size on both sides).
1Q-TRUNK - 7200VXR - ATM-SWITCH (NON-MPLS) - ATM-SWITCH (NON-MPLS) - 7200VXR - 1Q-TRUNK
Thanks
Best regards
Daniel

It is certainly possible to run MPLS (frame mode) on the interface/subinterface between the two 7200s, which will allow you to run EoMPLS. You should also be able to configure q-in-q in this configuration.
Hope this helps,

Rebuilding RAID set - need sanity check

I'm in the process of rebuilding a G5 used as a server that was built by a predecessor. It boots off two 250GB drives that are RAIDed. I don't have the password, so I attempted to change it using a Tiger install disk. Somehow booting off the DVD has destroyed the RAID set. I'm booting off a FW drive we use for diagnostics, and the drives show up in DiskUtility, but no RAID set up. if I do a 'sudo diskutil checkRAID' it says there's no RAID set to check.
If I list the drives they show up fine. Output (edited) is:
/dev/disk2
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk2
1: Applepartitionmap 31.5 KB disk2s1
2: AppleDriverOpenFirmware 512.0 KB disk2s2
3: AppleBootRAID 233.8 GB disk2s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: AppleDriverOpenFirmware 512.0 KB disk4s2
3: AppleBootRAID 233.8 GB disk4s3
So the sanity check is this: If I run a repair mirror (sudo diskutil repairMirror disk2 disk4) will it wipe both drives or just rebuild the existing RAID setup?

oh and that message keeps popping up, even when I log out of the website. If I choose "cancel" everything now continues as it should.

OES2SP3 to OES11SP1 Sanity Check

I have an OES2SP3 (SLES10SP4) server that I want to move to OES11SP1 (SLES11SP2). The tree is stable, but I am having some issues with the OES2SP3 server that I don't want to spend the time troubleshooting. My Master replica and all services is on a NW65 server and I have the luxury of being able to wipe the OES2 server. The OES2 server only does some file backups via scripts to an internal RAID and holds a RW replica. Looking for a sanity check on my process...
1. copy scripts from server to backup
2. remove eDir from server using nds-uninstall
(the OES doc says that ndsconfig rm is not supported in OES2SP3)
3. wait for replica ring to be stable - monitor via dsrepair on NW65 server
4. remove any references to the OES2 server via ConsoleOne
5. wait for replica ring to be stable - monitor via dsrepair on NW65 server
6. fresh install of SLES11SP2 and OES11SP1 (eDir only) onto server
7. add other OES11 services to server
TIA
-L

Originally Posted by LarryResch
I have an OES2SP3 (SLES10SP4) server that I want to move to OES11SP1 (SLES11SP2). The tree is stable, but I am having some issues with the OES2SP3 server that I don't want to spend the time troubleshooting. My Master replica and all services is on a NW65 server and I have the luxury of being able to wipe the OES2 server. The OES2 server only does some file backups via scripts to an internal RAID and holds a RW replica. Looking for a sanity check on my process...
1. copy scripts from server to backup
2. remove eDir from server using nds-uninstall
(the OES doc says that ndsconfig rm is not supported in OES2SP3)
3. wait for replica ring to be stable - monitor via dsrepair on NW65 server
4. remove any references to the OES2 server via ConsoleOne
5. wait for replica ring to be stable - monitor via dsrepair on NW65 server
6. fresh install of SLES11SP2 and OES11SP1 (eDir only) onto server
7. add other OES11 services to server
TIA
-L
Hi Larry,
If this is a regular fileserver (not housing iFolder and such special services)... your steps seem to cover the bases.
As an extra preparation step, if the OES server has it's own eDir replica, I'd remove it at least an hour or so before moving on to removing the OES server from the tree. Also running a quick eDir health check after having done so and before moving on to remove the server is a good routine.
Out of curiosity, do you have a link to the docs specifying 'ndsconfig rm' is unsupported? Have not run into issues with it but also had not seen that reference in the docs (not that I read them daily :P ).
If you have NSS volumes, you can relink them to the new server using the update NDS option within nssmu. Do note that you will also have to relink object properties to the volumes (like the user home directories).
Your tree CA configuration is also still valid (and not housed on the OES2 server)?
Cheers,
Willem

P6N Diamond & SLI controller sanity check

what i would like is a sanity check please from community before RMA is done, i've already contacted both MSI and supplier and have RMA status enabled but before shipping would like to do an opinion from more professional/ experienced people here please
MSI reports that SLI controller is bad and to RMA... so ya i probably will but just want doctor 2nd opinions
thanks in advance!
testing past few days and having major problems with SLI.
mainboard: P6N Diamond MS-7320 v1.0 BIOS 1.2
processor: Intel Core2 Duo E6850
graphics cards: SLI NX8500GT TD256EH (x2) PCIx16 (both in white slots )
memory: Corsair CM2x 1024-66400C4 (800mhz, dual channel) (total 2GB)
drives: WD1600AA (?) SATAII 3.0GB (raid 0, hardware dipswitched)
power: rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91 (voltages per bios in spec)
I have performed several tests including:
memtest86+ : 25 iterations on memory over 8 hour period = PASS
ntune stability test : nx8500GT (card #1) in pcix16slot#1 = PASS
ntune stability test : nx8500GT (card #1) in pcix16slot#2 = PASS
ntune stability test : nx8500GT (card #2) in pcix16slot#1 = PASS
ntune stability test : nx8500GT (card #2) in pcix16slot#2 = PASS
ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode on)
ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode off)
ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode on)
ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode off)
no overclocking
CPU temperatures ~22 celcius
SYSTEM temperatures ~38 celcius
GPU1&2 temp idle ~63 to 66 celcius
GPU1&2 temp stress ~72 celcius
all hardware tests ok, no power surges, power supply is adequate and in specs.
only problems occuring when both cards are in system and operate in either SLI or non-SLI mode.
all microsoft latest security updates applied
following hotfixes applied:
KB940105
KB936710
KB930833
KB932471
KB945149 (latest per request)

Quote from: BOSSKILLER on 07-December-07, 04:33:29
What kind of problems you have?
Have you tested in XP?
PSU details.
Latest drivers from Nvidia installed?
Power cables to both VGA's connected?
SLI Bridge connected?
Hi,
Answers best I can below:
Q: Have you tested in XP?
No, sorry.. I only have Vista x64 platform to use and test (license only )
Q: PSU details.
posted above, but here you go...
Rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91 (voltages per bios in spec)
Q: Latest drivers from Nvidia installed?
Yes (data from dxdiag for you)
Driver Version: 7.15.0011.6375 (English)
DDI Version: 9Ex
Driver Attributes: Final Retail
Driver Date/Size: 10/4/2007 17:14:00, 4993024 bytes
WHQL Logo'd: Yes
Q: Power cables to both VGA's connected? & SLI Bridge connected?
Interesting point With this particular setup, these MSI NX8500GT TD256EH cards do not have SLI bridge and do not require power plugged into video card. SLI option has onboard bridge controller and is recognized by nvidia drivers and nTune control panel (i am actually able to enable SLI this way w/o a bridge) yes, I had to rub my eyes too a few time while researching this configuration.
Mainboard supports ATX 24pin powerconnector (ATX1) and a ATX 12V (JPW1) 8 pin connector. The power supply supports these types of connections to mainboard. I will need to reboot after this post and do a visual inspection of reported BIOS voltages for you though and will do so.

Tier-2 Storage Sanity Check

Similar Messages

Maybe you are looking for