Tiered Data question

Actually I have a few questions so if anyone has any answers they would be greatly appreciated. Right now I have a Samsung Rogue featurephone and am charged $10 for 25MB/month which is fine with this phone. I want to get an iphone but would like to wait to see what the next one will offer and either get that one or a discounted iphone4.
So my first question is if I switch to the $30 unlimited plan before July 7th will I be grandfathered in even though I just have a featurephone or do you have to have the unlimited plan AND a smartphone.
Question two: Does anyone know if the business discount on the $30 unlimited plan will be grandfathered in? I read it will be moved to the new $50 plan but did not know if you could keep it if you already had it. (Don't have it yet but will get it if I switch over before the 7th)
And last question. I have the family share plan. My wife is also on the plan but doesn't want to switch over to the $30 unlimited plan from the $10 plan.(She would use very little data so it's not a big deal if she signs up later for the 2GB) If she ever wanted to switch to the $30/2GB plan would it change my data too or would I get to keep the unlimited. Thanks for any responses.
P.S. I know Verizon hasn't come out with anything official but even an educated guess would help.

stoltz316 wrote:
Actually I have a few questions so if anyone has any answers they would be greatly appreciated. Right now I have a Samsung Rogue featurephone and am charged $10 for 25MB/month which is fine with this phone. I want to get an iphone but would like to wait to see what the next one will offer and either get that one or a discounted iphone4.
So my first question is if I switch to the $30 unlimited plan before July 7th will I be grandfathered in even though I just have a featurephone or do you have to have the unlimited plan AND a smartphone.
I cannot imgine that would make a difference. It has never been a requirment that you had to have a smartphone to have the unlimited data but it has been a requirment that you have to have an unlimted data plan to have a smartphone. If you make the switch you should be safe.
Question two: Does anyone know if the business discount on the $30 unlimited plan will be grandfathered in? I read it will be moved to the new $50 plan but did not know if you could keep it if you already had it. (Don't have it yet but will get it if I switch over before the 7th)
The business discount I would think should apply to the $30 plan
And last question. I have the family share plan. My wife is also on the plan but doesn't want to switch over to the $30 unlimited plan from the $10 plan.(She would use very little data so it's not a big deal if she signs up later for the 2GB) If she ever wanted to switch to the $30/2GB plan would it change my data too or would I get to keep the unlimited. Thanks for any responses.
That may depend on who has the primary phone. If it is you then I would think she could switch without effecting you but if her phone is primary it may not work that way. It would be a complete guess on that one though.
P.S. I know Verizon hasn't come out with anything official but even an educated guess would help.

Similar Messages

Unlimited Data Questions...

Hey guys,
I have a few questions regarding ulimited data on my plan. I am on a plan with one other person. We share at total of 400 anytime minutes. We each have our own UNLIMITED data plans at $30 a month. We had both got Droid 1/Milestones when they came out. A year and some went by and i had recieved a Upgrade card in the mail. I used the card to purchase my Droid RAZR on 11/11/11. I was still enrolled in the UNLIMITED data plan at that point. Unlimited data was nixed as a plan on 11/28/11 which didnt effect me then but it does NOW as i am trying to upgrade to a newer phone due to speed and camera clearity. The person i am on the plan with still has their Droid 1/Milestone and ISN'T planning on upgrading ANYTIME soon. I recently recieved a text saying i could upgrade but would lose data. I use anywhere from 4.6-5.8gb of data a month because i do not have WiFi in my place of work, school, or at home.
For my questions:
1.) If i upgrade and renew for 2 years with a new phone i lose my unlimited data, correct?
2.) If the other person on my contract upgrades and then we switch phones she will lose unlimited as well
     but will that effect my phone number plan?
3.) I was told that i would be paying $810 total over 18 months if i upgrade to a higher data gb plan because
     it would jump from $30 a month to $75 a month which is $45 more. $45 times 18 months equals $810.
     Would it be more cost effective to BUY a phone at RETAIL and then activate it?
     3a.) Would Verizon charge for that?
     3b.) Would that remove my grandfather?
     3c.) Was the information i recieved from Verizon correct?

Bawkinator wrote:
Hey guys,
For my questions:
1.) If i upgrade and renew for 2 years with a new phone i lose my unlimited data, correct?
2.) If the other person on my contract upgrades and then we switch phones she will lose unlimited as well
     but will that effect my phone number plan?
3.) I was told that i would be paying $810 total over 18 months if i upgrade to a higher data gb plan because
     it would jump from $30 a month to $75 a month which is $45 more. $45 times 18 months equals $810.
     Would it be more cost effective to BUY a phone at RETAIL and then activate it?
     3a.) Would Verizon charge for that?
     3b.) Would that remove my grandfather?
     3c.) Was the information i recieved from Verizon correct?
1) Yes
2) Each line has their own contract. You can swap upgrades dates. The person who the upgrade originally belonged to will lose their unlimited data.
3) Not sure where the 18 months come in since you can only upgrade once every 24 months. The 5 GB plan is $50 a month( or $20 more ) and the 10 GB plan is $80 a month( or $50 more )
3a) Charge for what? data? More data you use the more it costs. That's how a tiered data plan works.
3b) because Verizon wants to get people off of unlimited data plans. This policy has been in effect for nearly 11 months now.
3c) yes and no.

Unsubsidized Activation and Unlimited Data Question

I'm currently an AT&T customer, and want to move to Verizon before the tiered data begins. I'd like a 4G phone, but the offerings right now are kind of sparce. So I'm thinking of buying a Droid 2 Global at full cost, and upgrading to the bionic whenever it comes out, but I've got a couple questions:
1. If I buy an unsubsidized phone and don't need to enter into a 2-year contract, will the unlimited data plan for month-to-month still be active after July 7?
2. When the Bionic finally comes out, will I be eligible for the subsidized cost? And can I keep the unlimited data for a 2-year contract?
Thanks!

SweetJebus wrote:
I'm currently an AT&T customer, and want to move to Verizon before the tiered data begins. I'd like a 4G phone, but the offerings right now are kind of sparce. So I'm thinking of buying a Droid 2 Global at full cost, and upgrading to the bionic whenever it comes out, but I've got a couple questions:
1. If I buy an unsubsidized phone and don't need to enter into a 2-year contract, will the unlimited data plan for month-to-month still be active after July 7? maybe, they are saying yes, but for ho wlong its not certain
2. When the Bionic finally comes out, will I be eligible for the subsidized cost? And can I keep the unlimited data for a 2-year contract? yes
Thanks!

Incorrect Data Overage Charges on my wife's phone after forced to tiered data

My billing cycle starts on the 1st of the month. I upgraded my wife's phone from a Droid X to an iPhone 4S on 7/2. I was told at that time that she would lose her unlimited data and be placed on a 2gb tiered data plan at the same price. Fine for her since she has never gone near 2gb in several years of smart phone use. I never set up wifi on her old phone since she had unlimited data and it wasn't a concern for me. Once getting switched to the new plan I set up wifi so when she is at work or at home she is automatically connected to wifi for her data usage. Looking at the usage report on verizon's bill for her old phone she used 1071mb for June which was actually a high usage month for her but still nowhere near 2048mb (2gb). Her first month on her new data plan she used 795mb according to the Data Usage Report (which they conveniently don't give a total for) which I exported to Excel and added the column. Then for August's bill the usage report for her phone totals 440mb. On the August bill they show an "Unbilled Usage from Previous Months" bill for $10 on top of the $30 we pay for the 2gb Data Plan
July Data
August Data
I like how they show an exact usage on my phone which is still on an Unlimted Data Plan but her's which is on a Tiered Data Plan they just round up conveniently to the next GB. Even if you add up there Unbilled and Current Usage it only adds up to 2048mb which is the limit. So she did not exceed it!
I called in and complained about the bill and the first CSR was trying to hand me off to a Tech Support saying the charges are accurate.
I told her this is a Billing issue not a Tech issue and I would like to talk to a Supervisor. After several minutes of arguing about the charges with the Supervisor he said he could credit the $10 back to me since he didn't want to continue arguing with me. I told him I will just be in the same boat next month and having to dispute the false charges all over again burning more of my time. I told him I would like to cancel my NFL Mobile on my phone at this time since my bill is so high and we got to talking about football which calmed both of us down. Then I pleaded my case again about the bill which he eventually could see the issue and agreed that there is some sort of billing issue going on.
Just wanted to put this up so that if someone else is in a similar situation that they know this is not ok and others are being billed in-accurately as well.
I have attached the spreadsheets straight from Verizon's site so you can tally them up for yourself as well and see that my wife only used 795mb of her allowed 2048mb (2gb) plan and was being charged overage charges. This is a pretty good gimmick since if you do this to even a couple 100k customers it would add up quickly to millions of dollars...
I am completely fed up with Verizon now after being with them for 15+ years, I was not happy about the non-grandfathering anymore of unlimited data and now being wrongfully billed for data overage charges when she didn't go over her allowed usage.
I am thinking of making a FCC and BBB complaint to see if I can get out of my contract with them.

For someone who spends soo much time on this forum I would expect you to know more about what you are talking about
My wife's wifi radio is always on and her phone DOES automatically connect to our wifi and her work wifi as soon as she is near it. I can videotape it if you need more proof.(don't understand your point anyways as even according to Verizon's usage report she did not come near 2GB of data)
If you read my very first sentence I state that my billing cycle starts on the 1st of the month and the phone was purchased on the 2nd (don't understand your point anyways)
I state in my original post that Verizon rounds up the data on her phone to the nearest GB instead of giving an exact amount used on the bill (so thank you for pointing out the obvious)
Point being, she used 440mb and we were charged data overage charges of $10 and I am sure that this is not an isolated incident.

New tiered data plans suck

I just wanted to vent my feelings about this ridiculous change. I filed a complaint with the FCC as well and urging any VZW users I know to do the same. This has got to stop at some point and I've about taken all the crap I can from big business.
I feel I need to mention that I average way less than 1GB of usage per month. The problems with your "tiered" data are that:
It doesn't cost us any less and there aren't any cheaper options. In fact, it's a price increase in disguise. It's hard to swallow when the price of bandwidth and transport costs continue to decline yet we are shafted with price increases.
If you are going to charge me for 2GB of data then give me my 2GB. If I only use 1GB then roll the other 1GB over. After all, I did pay for that bandwidth. Your 2GB tier over the course of a year is 24GB. If I average just 12GB but went over the 2GB for just one month, I will get hit with an overage charge. I am just not sure how this is fair to me as a consumer and how anyone can even justifty this.
If you want to do away with "unlimited" plans then just charge for what is actually used. But then, of course, I'll only be paying for the data that I use and not donating money for the data I don't use. I don't understand why Verizon thinks it's OK to rip off customers like that.
I used to have nothing but praise for "Big Red". Lately though, I've had nothing good to say. You guys have done away with the New Every 2 loyalty perks, introduced garbage tiered data plans that aren't even competive and various other things. The excuse to justify all of this is something along the lines of "Everyone else is doing it". Assuming that point is valid (I don't believe it is), you should leave well enough alone to keep yourselves distinguished from everyone else. Instead you're lowering yourselves to the same subpar standard as the others.

BigPete wrote:
I just wanted to vent my feelings about this ridiculous change. I filed a complaint with the FCC as well and urging any VZW users I know to do the same. This has got to stop at some point and I've about taken all the crap I can from big business.
I feel I need to mention that I average way less than 1GB of usage per month. The problems with your "tiered" data are that:
It doesn't cost us any less and there aren't any cheaper options. In fact, it's a price increase in disguise. It's hard to swallow when the price of bandwidth and transport costs continue to decline yet we are shafted with price increases.This may be true on a per MB charge, but even if the cost per MB drops, that doesn't mean that the total cost of data is dropping. If the cost per MB drops by 50%, but you then use a 5 times as much data, the total cost of the data has in fact increased 2 and a half times. I'm not saying this is the actual decrease in cost per MB or the actual increase in the amount of data for the average user, but ALL reports for data usage have said they are increasing at the same time that the cost per MB is decreasing. This is just to show that the TOTAL cost of the data isn't necessarily decreasing.
If you are going to charge me for 2GB of data then give me my 2GB. If I only use 1GB then roll the other 1GB over. After all, I did pay for that bandwidth. Your 2GB tier over the course of a year is 24GB. If I average just 12GB but went over the 2GB for just one month, I will get hit with an overage charge. I am just not sure how this is fair to me as a consumer and how anyone can even justifty this.They don't give you roll-over minutes, I doubt they will start giving you roll-over data. Especially when the company that DOES give you roll-over minutes DOES NOT give you roll-over data.
If you want to do away with "unlimited" plans then just charge for what is actually used. But then, of course, I'll only be paying for the data that I use and not donating money for the data I don't use. I don't understand why Verizon thinks it's OK to rip off customers like that.This is exactly what the tiered data plans are doing, they just are doing it in a way similar to the minutes levels. There are 3 levels on data plans. With the minute plans there are 3 levels and an additional level for unlimited.
I used to have nothing but praise for "Big Red". Lately though, I've had nothing good to say. You guys have done away with the New Every 2 loyalty perks, introduced garbage tiered data plans that aren't even competive and various other things. The excuse to justify all of this is something along the lines of "Everyone else is doing it". Assuming that point is valid (I don't believe it is), you should leave well enough alone to keep yourselves distinguished from everyone else. Instead you're lowering yourselves to the same subpar standard as the others.

Has anyone here gotten any notification from VZW that tiered data plans are coming on July 7?

I have heard on the internet, as well as my TV local newscast, but not once have I gotten an email, text, phone call or postcard in the mail that there will be tiered data plans beginning 7/7/11. I am not one to complain about vzw, but I have to say something here; this is to say the least pi** poor customer service. Here we are t minus 6 days and counting, and I haven't heard one peep from VZW. I hate to think that they are trying to catch people off guard with tiered data, but their silence just reinforces that fact.

jimfitzgerald wrote:
There is absolutely no reason for Verizon to notify current customers who are under contract. Anyone who shops for a new contract will know what their options are and what the prices are.
That actually makes a lot of sense!

7.9.6.1 Financial Analytics - JDE - Extract Dates question

Hi all,
Implementation of 7.9.6.1 Financial Analytics + Procurement and Spend Analytics
OLTP: JDE E9
OLAP DB: Oracle 11g
We were trying to adjust the # of prune days for an incremental load, when we discovered the change was having no effect.
Our situation - JDE*
Looking at the parameters in DAC, we found that the incremental condition in the SDEs is:
date >= *$$LAST_EXTRACT_JDEDATE*
In DAC, this parameter expands to:
TO_NUMBER(TO_CHAR(TO_DATE('@DAC_$$TGT_REFRESH_DATE'), 'DDD'))+(TO_NUMBER(TO_CHAR(TO_DATE('@DAC_$$TGT_REFRESH_DATE'), 'YYYY')) -1900) * 1000
If one keeps digging,
+$$TGT_REFRESH_DATE = @DAC_TARGET_REFRESH_TIMESTAMP in custom format, MM/DD/YYYY+
Compared to EBS*
Now, if I look at the *$$LAST_EXTRACT_DATE* parameter (used in EBS SDEs)
It expands to:
+@DAC_SOURCE_PRUNE_REFRESH_TIMESTAMP in custom format, MM/DD/YYYY+
Conclusion and question*
Obviously the Julian date conversion is required in $$LAST_EXTRACT_JDEDATE, but apparently the prune days are being considered in $$LAST_EXTRACT_DATE and not in $$LAST_EXTRACT_JDEDATE.
An obvious fix is to use @DAC_SOURCE_PRUNE_REFRESH_TIMESTAMP in $$LAST_EXTRACT_JDEDATE, but I don't know if that would have any side effects. I'll test it.
I'll raise a SR with Oracle, but wanted to check if you guys had seen this before.
Thanks, regards.-
Alex.-
Edited by: Alejandro Rosales on Feb 22, 2011 5:57 PM

Hi Alejandro,
Maybe this has been updated/correct in 7.9.6.2. Later today I will be in the office and can check in a VM image.
I'll update the thread as soon as soon as I have checked this out.
Regards,
Marco Siliakus

IPhoto 11 Event Date Question

I have a question about iPhoto 11 events. My camera was set to the wrong date for part of an event. I went in and did a batch change of the time and date of the affected photos. However, the date range beneath the title of the event still has the old erroneous date, and the event gets sorted by this date range. Is there a way to go in and change that date range under the title of the event? I go to the event and click on info, and the event shows the correct date range for the pics, but it is not changing the date range under the title. Thanks for any help in advance.

Thank you - I had the same problem and found your helpful answer. However, this is actually a work around to a bug in iPhoto - it's not how the Apple Support pages say it works and common sense says that if you change all the dates in an event it should sort to the right place without being re-created. Can you help me with one more thing - how do I bring this to Apple's attention so that they fix it in a future release?
Thanks again for the help.

Date question in Oracle

hi
how to insert (text) time: 09:44:02 and date:11/09/2007 to date filed in Oracle ?
i have field Tdate (date) and Ttime (date) in oracle
thanks in advance
Edited by: GoldSoft on 16:33 22/08/2011

Gold, I think SB has answered your question. You use to_date to pass the character representation of a date to Oracle and identify what format the date is in using a format mask. To get a date data type out of Oracle and present it any way you want you use the to_char function and a format mask to tell Oracle how to display the date information.
You can find the date format mask characters listed in the SQL Language manual. Just look up to_date or to_char and there should be a reference to the available masks.
HTH -- Mark D Powell --

Date Question

I need to run a query to get certain information from my Oracle table that's over 9 months old. My query doesn't seem to be working properly. Below is my query:
---Getting today's date----
currentDate = new SimpleDateFormat("MM/dd/yyyy").format(new java.util.Date());
-----query to check for drawings that are over 9 months old-------
queryRptchoice = "SELECT Drawing.dwgID, Personnel.prsnlID, Drawing.PMDwgNum, Drawing.dwgSize,";
queryRptchoice += " Drawing.Title, Personnel.fname, Personnel.lname, Checked_Out.modNum,";
queryRptchoice += " Checked_Out.chkoutDate, Checked_Out.Project, Checked_Out.AEFirm, Checked_Out.AEName";
queryRptchoice += " FROM AJM.Drawing, AJM.Personnel, AJM.Checked_Out WHERE Drawing.dwgID = Checked_Out.dwgID";
queryRptchoice += " AND Checked_Out.prsnlID = Personnel.prsnlID AND Drawing.isCheckedOut = 'yes'";
queryRptchoice += " AND Checked_Out.isCheckedOut = 'yes'";
queryRptchoice += " AND chkoutDate <= TO_DATE('" + currentDate + "', 'MM/DD/YYYY')";
queryRptchoice += " AND chkoutDate < ADD_MONTHS(TO_DATE('" + currentDate + "', 'MM/DD/YYYY'), -9)";
Any help would be greatly appreciated.

This is a common question. Go into the JDBC forum and put the words date and oracle in the search forum box. Press search. You have a few options. You can format the date differently or use a preparedstatement.

Variant to Data question

This is a LV6.1 question. For an application I'm debugging, flatten data is
being used on a menu ring control. The menu ring data is unflattened using
Variant to Data. What I get back from the unflatten process is the numeric value
of the menu rings index, which is what I would expect, no problem there.
What I'd like to also get back from the unflatten process, would be the
string array of names for the menu ring that was flattened. Can someone
suggest how I can do this?

The data is only the number of the element chosen (a blue wire) and not any more data about the element. To get the list of strings you should use the Strings[] property node. Then, you can flatten and save that array.
Another option is to pass (or obtain) the reference to the ring to whereever you're using it and then use a property node to extract the data you need.
A third option is to use an enum which keeps the data inside the wire, but that means you will need to have the exact same enum on the other side (which means it probably won't help you). You can do this by making the enum a typedef.
What are you trying to accomplish?
Try to take over the world!

"Simple" date questions

Hi!
Can anyone help me with some questions regarding Date and Calendar(GregorianCalendar)?
How do I find the number of days in a month?
How do I find the number of weeks in a month?
(I'm making a calendar... ;)
In advance, thanks!!
JB

Hi!
Can anyone help me with some questions regarding Date
and Calendar(GregorianCalendar)?
How do I find the number of days in a month?What month? Presumably you mean for any given month and year.
- Construct a date for a given month using '1' for the day of the month.
- Create a calendar
- Use setTime() on the calendar to set it.
- Use getMaximum(Calendar.DAY_OF_MONTH) to get the last day
>
How do I find the number of weeks in a month?
No idea because "week in a month" is an ambigous term...
Full weeks? Does a single day count as a week? Does a week start on sunday, monday, saturday, etc?
If the start day doesn't matter. Then full weeks is "days in month"/7 and partial weeks is ("days in month" + 6)/7

Simple date question

Hi Experts,
I do not know ABAP which explains my straight forward question.
I am coding in BI.
Based on an invoice date, I need to work-out the fiscal year.
If the month of the invoice date is >= 4, then the fiscal year, is the current year.
If the month of the invoice date is jan-march, then the fiscal year, it the current year-1.
Thank you.
PY

data: gs_month(2) type c.
gs_month = gs_invoice_date+4(2).
if gs_month GE 4.
gs_fiscal_year = sy-datum+0(4).
elseif gs_month between '01' and '03'.
gs_fiscal_year = sy-datum+0(4) - 1.
endif.
Greetings,
Blag.

Strange Matrix group by date question

I have the following data:
name
date
value
bob
1/1/2015
5
jane
1/1/2015
7
jim
1/1/2015
9
bob
1/2/2015
2
jane
1/2/2015
5
jim
1/2/2015
5
bob
1/2/2015
4
I am using a matrix with a group by date to produce the following:
1/1/2015
1/2/2015
bob
5
4
jane
7
5
jim
9
5
As you can see it only selected one value for bob on 1/2.
Is is possible to show all of the values while still grouping by date?
I would prefer something like
1/1/2015
1/2/2015
1/2/2015
bob
5
2
4
jane
7
5
jim
9
5

Hi ,
I have created sample report based on your question. Steps are listed below:-
Sample query is modified to get one more Column rowid as shown in below SQL query:-
select *,row_number() over(partition by name,date order by date )rowid from
SELECT 'bob' name, '1/1/2015' date ,5 value
UNION
SELECT 'jane' , '1/1/2015' , 7
UNION
SELECT 'jim' , '1/1/2015' , 9
UNION
SELECT 'bob' , '1/2/2015' , 2
UNION
SELECT 'jane' , '1/2/2015' , 5
UNION
SELECT 'jim' , '1/2/2015' , 5
UNION
SELECT 'bob' , '1/2/2015' , 4
)T
Now Create the matrix report rows --> Name
Columns---> Date
Detail---> Value
After creation of matrix, just go to the Group Properties of Column group and add as shown below
After this setting , run the report, it will give result as shown below:-
RDL Code for reference:-
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="matrix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.21in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!value.Value)</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_date">
<GroupExpressions>
<GroupExpression>=Fields!date.Value</GroupExpression>
<GroupExpression>=Fields!rowid.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!date.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.21in</Size>
<CellContents>
<Textbox Name="date">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!date.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>date</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_name">
<GroupExpressions>
<GroupExpression>=Fields!name.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!name.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1in</Size>
<CellContents>
<Textbox Name="name">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!name.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>name</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<RepeatColumnHeaders>true</RepeatColumnHeaders>
<RepeatRowHeaders>true</RepeatRowHeaders>
<DataSetName>DataSet1</DataSetName>
<Top>0.37in</Top>
<Height>0.42in</Height>
<Width>2in</Width>
<Style />
</Tablix>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Strange Matrix Group by Date</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontSize>14pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>SteelBlue</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<Height>0.37in</Height>
<Width>5in</Width>
<ZIndex>1</ZIndex>
<Style>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Height>1.04in</Height>
<Style />
</Body>
<Width>5in</Width>
<Page>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>b2ebe046-5f1b-45c9-82e7-5baa7ed2460a</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<CommandText> select *,row_number() over(partition by name,date order by date )rowid from
SELECT 'bob' name, '1/1/2015' date ,5 value
UNION
SELECT 'jane' , '1/1/2015' , 7
UNION
SELECT 'jim' , '1/1/2015' , 9
UNION
SELECT 'bob' , '1/2/2015' , 2
UNION
SELECT 'jane' , '1/2/2015' , 5
UNION
SELECT 'jim' , '1/2/2015' , 5
UNION
SELECT 'bob' , '1/2/2015' , 4
)T</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="name">
<DataField>name</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="date">
<DataField>date</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="value">
<DataField>value</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="rowid">
<DataField>rowid</DataField>
<rd:TypeName>System.Int64</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>dfd8f7e8-fcc1-4636-991e-d86824825c30</rd:ReportID>
</Report>
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further.

Duplicate row data question.

Hello:
I am working on displaying data from ms sql server onto a jsp. data contains metrics about number of views for each portal module/application.
The back end SQL query gives me 5 columns -
1.report_date
2.unique users
3.max_users
4.module_name
5.views
I want to display (in the jsp) one set of row for each report date, but my resultset has multiple data for same date, each with different module_name and views. The other column data (2,3) is the same.
I need to break "views" up under the appropriate module_name column and put there "views".
Is there a way i can use hashmap or arraylist to load the resultset and then create one row per report date with various module_name and there views?
Any useful input will be greatly appreciated.
Jharsh

Thanks Mchan, i think my question title is confusing.
I don;t really have duplicate rows, my data has multiple rows but different data under column - module_name,views: for the same "report_date" , and i want to display these in one row for that report_date.
jharsh
This is what i am basically trying to achieve:
report_date max_users max_concur_users module_name views
06/02/2006 10 12 XYZ 6
05/01/2006 13 9 ABC 7
12/23/2005 11 7 EFG 9
12/23/2005 11 7 HIJ 4
I need to diplay this in the jsp in the below format:
report_date max_users max_concur_users XYZ ABC EFG HIJ
06/02/2006 10 12 6 0 0 0
05/01/2006 13 9 0 7 0 0
12/23/2005 11 7 0 0 9 4
Message was edited by:
jharsh

Tiered Data question

Similar Messages

Maybe you are looking for