Tif files sent to myself and a few other people arrived in my email as files to open and arrived at a friends email box open already???Why

jpegs always arrive unopened but open with no degradation of quality whereas the tif file opening with picture viewer are degraded and almost unusable.

This sounds like you do have a corrupted Inbox file.
First of all create a backup of your profile folder.
http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring
Then try to repair Inbox.
Right-click Inbox - Properties - Repair Folder

Similar Messages

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

Hi please help me I'm useles with these thing. I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

I'm sorry we cannot help you.
You have Jailbroken your device. Apple does not support Jailbreaking and as such having done so has voided your warranty and forfeited any support from Apple and by extension these forums. We are not allowed to discuss Jailbroken devices in any way by the Terms of Service of the forum.
You will have to find help elsewhere. Ask the person that installed Cydia to restore the phone.

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I had this same problem. Tried everything the internet said including a full restore. Which was terrible. Nothing worked until.....go to general...reset....reset all settings.
You had to go back in and reset anything you customized afterwards, however it does not allow the store to load. Thanks!

Few countries bank Account Number is mandatory and for few others it is not

For few countries bank Account Number is mandatory and for few others it is not mandatory in the Payment Transaction Tab in Bank Details of Customer.
My question is that why will anyone not fill bank account number when he has given Bank Key and other details.
Is it related to Payment by other methods , other by Cash.

Hi Ranjeet,
You should ask this question to the person who has information about bank details but not process them.
Yes bank account is related with payment transactions. If you want you can make this field mandatory in customizing;
SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Define Account Groups with Screen Layout (Customers) or Define Screen Layout per Company Code (Customers) or Define Screen Layout per Activity (Customers)
You can also set message F2813 (Enter an account holder) as error in customizing;
SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Change Message Control for Customer Master Data

[svn:fx-trunk] 9892: Panel skin changes per XD spec, and a few other Panel Skin bugs.

Revision: 9892
Author:   [email protected]
Date:     2009-09-01 16:06:51 -0700 (Tue, 01 Sep 2009)
Log Message:
Panel skin changes per XD spec, and a few other Panel Skin bugs. Default Panel size changed to match spec. Panel titles are now single-line and show ellipsis.
QE Notes: Panel-related bitmap compares will need upgrading
Panel_Properties_title5
Panel_Properties_DfrdInst_none
Panel_Properties_DfrdInst_auto
Doc Notes: None
Bugs: SDK-21680, SDK-21671, SDK-21666, SDK-19962, SDK-19959
Reviewer: Ryan
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/managers/Panel
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21680
    http://bugs.adobe.com/jira/browse/SDK-21671
    http://bugs.adobe.com/jira/browse/SDK-21666
    http://bugs.adobe.com/jira/browse/SDK-19962
    http://bugs.adobe.com/jira/browse/SDK-19959
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ApplicationSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/defaults.css
    flex/sdk/trunk/frameworks/projects/wireframe/src/WireframeClasses.as
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/PanelSkin.mxml
Added Paths:
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/ApplicationSkin.mx ml

New forum: http://forums.adobe.com/community/flash_builder

Exchange 2007 wont send to AOL and a few other domains

Have tried everything. We switched from Time Warner Cable, to AT&T firber optic, and now we cant send email to AOL, and a few other domains. rDNS is setup correctly, and still no go. Any help would be good.

Hi,
How about the internal communication?
Agree with both MAS and Rich, detailed errors will be helpful for the further troubleshooting.
Please use mxtoolbox to check blacklist.
Please check the Send Connector settings.
Thanks
Mavis Huang
TechNet Community Support

HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
<Edited by Host>

What other solutions have you tried?
This may help you:
https://discussions.apple.com/docs/DOC-3353
Ciao.

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

[SOLVED] kdeinit4 crashing on startup (and a few other new installat..

I have just switched from openSuSE to ArchLinux, and needless to say, am a bit disappointed as to why I didn't make the switch before. ArchLinux is just pure awesome and everything seems to be working fine after a mile of manual readings and tweaking around configuration files. There are just a few issues I'm facing:
1. kdeinit4 crashes on startup: I get a KCrash dialog which says that it has crashed. The title says 'The KDE Daemon has crashed'. This is the backtrace I was able to generate from that: http://pastebin.com/L7C9iwPY
2. KDE does not store any session data: I don't like those pesky launchers on my plasma panel (the one with the taskbar and all), so I removed them. But after the reboot, they reappear. I have to remove them every session. With yakuake, I have to change the height and width of the console at every reboot, as it just switched back to the default values at every session start. Some settings do seem to persist though, for example, I have my plasma panel set at the top screen edge. This stays the same for every reboot. I have a feeling this problem has something to do with the KDE daemon crashing.
3. Nepomuk keeps on crashing: I keep on getting this notification error on startup: http://imgur.com/PyGpQ
Other than this, everything seems to work with my laptop.
Information about my laptop
Model: Dell Studio 1555
KDE version: KDE 4.7.00 (from repository)
Output of `uname -a`: Linux meanmachine 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64 Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz GenuineIntel GNU/Linux
Last edited by rohanprabhu (2011-09-04 10:25:43)

Also, for now to solve the problem, I am making kdeinit not play any notification sounds. Since phonon-vlc is crashing KDE applications (from a look around the web, it is not only kdeinit that is crashing due to the phonon-vlc bug), this must be when it tries to play some media, which obviously is the startup notifications.
Go to System Settings > Application and System Notifications > Player Settings and select 'No Audio Output'. Works for me.
Or one can just switch to phonon-gstreamer, but in that case banshee and rhythmbox crash for no reason while trying to play media.
Now KDE is storing session data [was a huge problem since I could not use custom power management profiles.. pretty difficult with a laptop], but Nepomuk is still crashing. Not really buying the whole semantic desktop thing.. so just going to live with it till an update resolves it

My App Store App, Preview App and a few others won't open!

Recently, my App Store App, the Preview App, Calendar App, Pages & Numbers Apps, to name a few just wont open and run. Even the Mail App, albeit opens, but wont run properly.
Ive remember seeing someone with the same problem, but im unable to findthe link again for how it was resolved.
Ultimately i could reinstall Snow Leopard again from my current copy of Mavericks (As i believe is the problem), however it would mean a complete fresh copy. If i did this, is it straight forward to copy all my info on Time machine back over onto the new system? Or more importantly, will Time Machine overwright & copy the corrupt copies that currently reside on my Mac?
Any advice or options to this problem would be greatly appreciated.
Thx

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

My iPad2 is frozen at slide to unlock and every few minutes te apple appears on the middle for a while and then back on freeze to the slide to unlock screen. Please I need your help please

My iPad2 is frozen at slide to unlock screen, every few minutes the apple appears in the middle of the screen and couple of minutes later it will go back on freeze to the slide to unlock screen . I have tried all tricks even the restoration through iTunes which I was never able to complete because of the apple screen; iTunes thinks I am resetting my iPad and the restoration get aborted.
Please help, I can't even turn it off.

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Is icloud suitable for a business that would want to upload many big files and share with other people?

I work in a media porduction company and am researching cloud storage and find alot of them look good on the surface but there are plently of addional costs for how much cloud storage i want.
How much storage space can you get with Icloud?
Costs?
Can i upload from external hardrives?
Can it be assessable anywhere?
Can i share files with clients?

iCloud does not offer any of these facilities: it is for syncing personal email, caledars, contacts and photos taken on any one device to the other devices. There is no general file storage in the manner of Dropbox or the late lamented iDisk.
Probably you have already examined the available options but this page may offer some information:
http://www.wilmut.webspace.virginmedia.com/notes/missing/inicloud3.html#share

High Memory Usage and a few other problems

I install Oracle DB 11g R1 into a Window 2003 Server virtual machine (VirtualBox) running on Ubuntu Linux. I did just a "plain jane" install accepting most, if not all, the defaults. When I start the service though, the Mem Usage shoots to @ 400 megs and there are several java.exe's that are also running each with anywhere between 80 and 130 megs. Plus, its seems that they never seem to 'settle'; Oracle.exe and one of the java.exe's are always taking up basically 100% of the processor.
This is just CRUSHING my poor little machine.
Any way to throttle these guys back? I can reinstall if needed. Its not like I've done much with it yet.
Thanks!

Your 400M seems quite lightweight - probably based on a VM allocation of 1GB. You are starving the poor thing. You possibly missed this section in the Install manual before you did the install (http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/reqs.htm#i1011417)
The database instance itself wants between 500M and 750M for the SGA for a minimum 'properly functioning' system.
Any user connections will want roughly 30-50M / connection, although that can vary wildly.
Enterprise Manager (DB Console), being Java (JEE) based, will gobble as much as you give it, and then some.
If you want to cut back, turn off the EM DB Console. If you do not want features, you could always perform a separate CUSTOM dbca creation without Java in the database and there are several other features that you could toss. 11g could probably limp along with as little as 350M. (You seem to be in the limping-along arena.)
And yes, the internals to Oracle Database do dictate fairly significant memory, CPU and disk (esp bandwidth) utilization. Your poor machine is being crushed because you have mismatched it to the load.

Tif files sent to myself and a few other people arrived in my email as files to open and arrived at a friends email box open already???Why

Similar Messages

Maybe you are looking for