.Tiff files show as RAW files

I have an Olympus C-770 Ultra Zoom and have just shot some .Tiff files and loaded them into my 5th G. iPod via the Apple camera connector. They have shown up as RAW files for some unknown reason so I can't view them on the iPod. What is going on and what is the solution?

Thank you for replying. That is right, I am quite suspicious of memory - my laptop is full to the brim and I suspect that this may affect available memory and cause some problems in LR. Unfortunately, I don't know enough about computers to be certain.
The card reader - quite simple: the card reader is the same, whether I save the files to the internal or external drives. I put the SD card in it, then copy the files and paste them where I want them. When done, I then open the LR and synchronize the folder. When I copy and paste files to the internal drive, the images look fine in LR; when I copy and paste them into the external drive, 80% of them come up visually corrupted in LR. Since the same card reader is used in both cases, and the files are OK when saved internally, I am assuming it is not the card reader.
So, basically, when I became aware of the problem, I tried copying and saving the same file both internally and externally from the card reader, in order to verify what was going on. That is how the same file (more than one, actually) ended up on three different drives.
Right now, my instinct is to copy everything to an external drive and clear some space on the internal one. I am very apprehensive though - what if something is causing file corruption on the external drives - in that case I will be corrupting everything when I migrate the files. Hence my previous question - are the files actually corrupted, or do they simply appear corrupted in LR because of memory issues? As I said, I don't know enough about this to be certain and do not know what to do.

Similar Messages

  • Is it possible to show Nikons raw files (.nef) in the organizer as thumbnails?

    Hello
    Is it possible to show Nikons raw files (.nef) in the organizer as thumbnails?
    Best regards Dieter

    Yes it is possible, depending on your camera and version of PSE

  • Hello I installed ps cs6 using creative cloud and bridge doesnt show my raw files

    hello I installed ps cs6 using creative cloud and bridge doesnt show my raw files. what should I do

    What camera are your raw files from?
    Have you updated the software to the latest release?
    Why are you using Photoshop CS6 instead of CC (2014)?
    -Noel

  • Can i with a script force bridge cs5 to show only raw files?

    Hi
    i know there is the filter feature
    but i have every time to set to show me the raw files
    can a script show only raw files ? like *.cr2
    in short i work only with raw files
    i would like to have a solution to display only raw files
    to load with bridge and have bridge ready to show only raw files
    set it on the filter feature is boring ,seeing i use it a lot and every time i run bridge i have to set the filter every time
    thanks

    It appears that with the Sort function set to Flie Type you can bring up just the raw
    files as a group.  With the Filter it appears that it always opens up in the default mode to arrange by file name.
    You could get a script to change it to file type, but that does not save any effort over just clicking on it in the Filter section.  Whether or not you can get a script to change the defalult I would ask in the Bridge scripting forum.  http://forums.adobe.com/community/bridge/bridge_scripting

  • Flat file Destination VS Raw file Destination ??

    Team ,
    Can some help me understand few differences and similarities  between Flat File Destination and Raw File Destination ? Thanks in advance .
    Rajkumar Yelugu

    Hi,
    Please check these differences :-
    Flat File Destination: The Flat File Destination component writes data out to a text file in one of the standard flat-file formats: delimited, fixed width, fixed width with row delimiter.
    Raw File Destination: The Raw File Destination is all about raw speed. It is an entirely native format and can be exported and imported more rapidly than any other connection type, in part because the data doesn’t need to pass through a connection
    manager.
    durgesh sharma

  • I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

    I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

    Than LR should have brought in the RAW files as well. ACR is the RAW
    processing engine used by LR under the covers so anything not supported by
    ACR would not be supported by Lightroom.
    Are you shooting RAW plus JPEG? By default, Lightroom will stack then
    unless you tell it not to. Check to see if there is a small badge on the
    preview that looks like two sheets of paper with a number. That is how
    Lightroom indicates a stack. You can unstack them by clicking on the badge.
    There is also a menu item to stack/unstack photos. Otherwise, I would have
    to research but not sure why Lightroom would ignore the RAW photos but
    still import the JPEGS.

  • Treat JPEG files next to raw files as seperate files still imports and displays them as seperate images

    Hi, I am taking RAW + JPEG files on a Nikon D810. The RAW files are saving to a CF (primary slot) and JPEGs to an Eye-Fi card (secondry slot). When I am importing into Lightroom 5 directly from the camera, even though I have 'Treat JPEG files next to raw files as seperate files' UNchecked in preferences, it still imports and displays them as seperate images. I am trying to import the JPEG as a sidecar file only to the RAW file as I have read about but this is not happening, any ideas why? Thanks

    Well in Lightroom they are apart from each other before the actual import, all the JPGs list first then all the NEF files next. The same actual photo as the NEF or as the JPEG both have the same file name apart from the .JPG or .NEF so that is not the problem. The NEFs go to the CF card and the JPGs go to the EyeFi SD card, I think you are onto the issue but I'm not sure what I need to do to fix it. I guess I need to change a setting on the D810 itself. There really doesn't seem to be any other settings apart from the RAW + JPEG vs only one or the other and allocating which card is primary for the RAWs and which card is secondry for the JPEGs. I really need the JPEGs to go to the EyeFi SD (secondary) for live iPad image viewing and not to the same primary card (CF) as the NEFs (RAWs) go. This does seem to be a typical setup so I would think it has been encountered before.
    Thanks for your help any other advise is appreciated.

  • TIFF & JPEG renders of RAW files appear different when viewed in Bridge

    I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
    I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
    I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
    http://www.sendspace.com/file/t0lhko
    I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
    I will happily provide any other information on request. Thanks!
    Photoshop System Info:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
    Physical processor count: 6
    Processor speed: 3511 MHz
    Built-in memory: 16382 MB
    Free memory: 13415 MB
    Memory available to Photoshop: 14766 MB
    Memory used by Photoshop: 71 %
    Image tile size: 132K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 460/PCIe/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 460
    OpenCL Unavailable
    Driver Version: 8.17.13.142
    Driver Date: 20120515000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1200 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 460
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      E:\, 770.4G, 644.1G free
      K:\, 931.5G, 482.3G free
      L:\, 1.82T, 854.4G free
      H:\, 1.75T, 505.2G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.1
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
    Thanks again,
    Kieren
    EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
    Many thanks!
    Thumbnail view w/o Auto:

  • Help! iPad 2 showing NEF/RAW files as 'local disk' ?!

    Hi all. I really hope someone can help as this is doing my nut in!
    I've always used the camera connection kit with my iPad 2 and Nikon D700 before with no problems. I can transfer the RAW/NEF files from my camera to my iPad 2, and then when I get home I can simply copy the RAW files to my PC by connecting the iPad via USB, browsing for the NEF files and copying.
    I've just returned from holiday and tried to do the same, but my NEF/RAW files from this trip are showing up as 'local disk' as shown here:
    They are definitely the RAW files, as when I right click on their properties they are about 13-14 MB in size which is about right. The properties box shows the file types as 'Local Disk'. If I try to copy the file on to my PC (Windows 7 Home Premium), it says there is an unexpected error (0x00000000) that keeps me from copying the file.
    I can't rename the file to .nef or anything.
    Previous RAW files from other holidays that are stored on the iPad2 still show as NEF/RAW and I can copy them to my PC with no probs. It's just this recent transfer from Camera to iPad has buggered all the files.
    If anyone knows of a remedy to somehow rescue these RAW files or let my PC be able to read/copy them I'd be much appreciative.
    Many thanks for your help in advance, and for reading.

    1.) Which of the two is the visible one in Library mode? can one set the preference?
    Raw only. The jpeg is sort of like sidecar. Cannot set a preference. The only setting you can change is to view them separately.
    2.) Which is edited?
    Raw only.
    ... and at the same time I feel I need to be able to compare them.
    Lightroom's Canon-specific DNG profiles are developed to match Canon's picture styles (or whatever they are called). So, if you use, say, the Faithful Picture style in Camera, Lightroom's "Camera Faithful" profile will render your raws very close to DPP, if not identical. That's for default settings. However when you start adjusting, Lightroom's and DPP's processing may differ.
    You may not even need those Jpegs for comparison, after all.

  • Incorrect TIFF tags added to raw files

    I have observed this on a CR2 raw file updated by Bridge on Mac. I don't know if the same error occurs on Windows as well.
    The tags XMP and Photoshop have the type UNDEFINED, but they are supposed to be of BYTE type.

    Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
    Thanks again,
    Kieren
    EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
    Many thanks!
    Thumbnail view w/o Auto:

  • Treat JPEG files next to RAW files as separate photos? or How do you not download JPG's

    Environment:
    LR 1.1
    PC: Windows XP SP2, Dual Core 6600, 4GB RAM
    Camera: Konica-Minolta 7D shooting RAW and JPG (CF card has 3 files for each frame, RAW, JPE, THM)
    Although I Imported my RAW files with no problem, I discovered that the Import also copied the CF card's JPGs to the same folder as my RAW files on the hard drive. So I set out to figure out how to import RAW into LR without also downloading JPGs to my hard drive. I have not succeeded at that and have added a, Delete of the JPGs from my HD before synching Metadata step, to my workflow, but I DID find some truly weird behavior.
    The File menu dropdown offers two ways to Import from the card.
    1) Import Photos from device which goes directly to the Import dialog where I have preview ON.
    2) Import photos from disk . . .which goes to a file display of the CF card for file selections before going to the Import dialog. (Required if you want JPG only)
    Also, if I click on the Import button to the left of the tool bar I am given a dialog box to choose:
    1) M\(Camera or Card Reader) or
    2) Choose Files..
    These correspond to the same options that the File menu offers.
    My results:
    If you want to Import only RAW files use the Device option.
    If you want to Import only JPG where you have RAW on your CF card use the Disk option and only select JPGs(with or without the preference switch set).
    If you want to Import both RAW and JPG use the Disk option with the Preference option ON and select both JPG and RAW files.
    But, I assumed (my error) that I could, using the Disk option, mix and match JPG and RAW selections.
    THEN the strange stuff . . .
    If in the disk option with the preference switch set ON, I selected just RAW or both RAW & JPG files on the CF card in the file selection dialog, the Import dialog always showed BOTH RAW and JPG files in the preview. If then, in the Import dialog for any specific file, I selected a RAW or JPG but not both, selecting RAW Imported a JPG file and selecting JPG Imported a RAW file. No kidding.
    I ran this test three times. I dont consider this a big problem because there is a way to get RAW only, JPG only and both when needed, but someone could look at the code before the next release. (Maybe the shell game goes away in Pirate mode.)
    My biggest disappointment is I could not find a way to Import RAW without copying a second file to the same folder on my hard drive which I will need to delete later. Maybe, next release. (Please)
    For the development team, I offer my thanks for your significant advancement of digital photography.
    For those that get to the bottom of this post, remember Rule 5.
    Bob McAnally

    >Speaking of which, WHY would anyone want to import jpgs alongside raws in Lightroom? I can't see any reason, and they just take up disk space. Am I missing something?
    I'm not as gifted at file editing as many of you are, and often the jpgs I get from Canon or Nikon are much nicer than the raws. Sometimes I am sufficiently pleased with the jpgs that I just toss the raws. Sometimes I want to play, and the jpgs give me a target to shoot for and try to surpass.
    Only when I really blew the exposure, not too common anymore, do I really need the raws to save what should have been a really great shot.
    I understand the arguement for raw files. I just haven't found that they are automatically better than the jpegs without a lot of tinkering.

  • How can I open multiple files as Photoshop Raw files at the same time for Photoshop CS6 extended on a PC?

    I am trying to open 20-25 files at the same time as Photoshop Raw [*.RAW] files.
    The only way I can open multiple files is if i leave the file type as All Formats. When I change it to  Photoshop Raw [*.RAW], the files a deselected.

    Use bridge. Select all the files then press ctrl-r or cmd-r to load the selected files into camera raw.
    If you try this in Photoshop use File>Open As then for file type choose camera raw. (I have not tested open as for opening multiple files)

  • Downloading Excel file shows increase in file size

    Hi,
    I have a XLS file, available in my SharePoint site.
    When i Click on the file, I get the "Open", "Save" and "Save As option". On top of this, I can see the file size which shows as "400kb".
    When I click on save and file is download the file size is shown as 900 kb. How does that happen? How is the file size increasing exponentially? How to resolve this?
    Thanks

    This element is true but not necessarily related to just the versions.  All Office documents will retain the list info from which they're downloaded (such as metadata info) as XML.  You could try clearing this data out as a test and then
    re-comparing the file sizes.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Photo viewers show camera RAW files.

    I accidently opened up a CR2 file in a Windows 8.1 photo viewing program included with it and now I see all my CR2 files in various photo viewing software.
    I don't not want this to happen. It just means viewing duplicate images when scrolling through it. Is there a way I can make Windows not to connect .cr2 files in the Windows Picture Viewer and other programs?

    Hi,
    I made a test according to your description, got the same result. System doesn't allow user uncheck the default file extension. While we can change the default program to open this type file, such as .CR2.
    Note: Our test machine is Windows 8.1 Enterprise X64.
    In addition, the file type of .CR2 is opened with PHOTOS not PHOTO VIEWER by default. What's your situation?
    If you don't want .CR2 file opened by any application, you can delete the regristry as bellow.
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.cr2
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.cr2
    Note: please backup these two regristry before you delete them, in case you want restore them.
    Roger Lu
    TechNet Community Support

  • XMP files for non RAW files **PLEASE!!**

    This is useless if I cannot write the image adjustments that I make out to matching XMP files.
    How can I move files/folders between machines???
    So PLEASE add XMP sidecar file support for non RAW formats.
    OR give us the ability to "export" a folder or files.. like in Aperture.

    Lee Jay,
    Thanks for that info!
    Since I did not see the XMP files I assumed...
    I just did a test and sure enough, the XMP data is written into the JPG file!
    On my mac I copied the file to another name, imported it and the changes were there as well as the ability to modify the changes.
    Further, for the geeks like me, I did a
    "strings file.jpg | more"
    command and was able to see the XMP data.
    Thanks!
    Edit to add: This is even better than Aperture projects and even separate XMP files!

Maybe you are looking for