TIFF & JPEG renders of RAW files appear different when viewed in Bridge

I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
http://www.sendspace.com/file/t0lhko
I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
I will happily provide any other information on request. Thanks!
Photoshop System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 3511 MHz
Built-in memory: 16382 MB
Free memory: 13415 MB
Memory available to Photoshop: 14766 MB
Memory used by Photoshop: 71 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 460/PCIe/SSE2
Display: 1
Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 460
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 460
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
  E:\, 770.4G, 644.1G free
  K:\, 931.5G, 482.3G free
  L:\, 1.82T, 854.4G free
  H:\, 1.75T, 505.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0  
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0  
   boost_signals.dll   DVA Product   6.0.0  
   boost_system.dll   DVA Product   6.0.0  
   boost_threads.dll   DVA Product   6.0.0  
   cg.dll   NVIDIA Cg Runtime   3.0.00007  
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0  
   dvacore.dll   DVA Product   6.0.0  
   dvamarshal.dll   DVA Product   6.0.0  
   dvamediatypes.dll   DVA Product   6.0.0  
   dvaplayer.dll   DVA Product   6.0.0  
   dvatransport.dll   DVA Product   6.0.0  
   dvaunittesting.dll   DVA Product   6.0.0  
   dynamiclink.dll   DVA Product   6.0.0  
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
   LogSession.dll   LogSession   2.1.2.1640  
   mediacoreif.dll   DVA Product   6.0.0  
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   pdfsettings.dll   Adobe PDFSettings   1.04  
   Photoshop.dll   Adobe Photoshop CS6   CS6  
   Plugin.dll   Adobe Photoshop CS6   CS6  
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
   PSArt.dll   Adobe Photoshop CS6   CS6  
   PSViews.dll   Adobe Photoshop CS6   CS6  
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
   TfFontMgr.dll   FontMgr   9.3.0.113  
   TfKernel.dll   Kernel   9.3.0.113  
   TFKGEOM.dll   Kernel Geom   9.3.0.113  
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113  
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.1
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Similar Messages

  • Why do my RAW files appear different between programs?

    I have rendered a series of three RAW images as an HDR file in Photoshop CC, saved as a 16-bit TIFF file, and imported it into Lightroom. The image appears different between the two programs. The Lightroom image appears to have some editing done already and is not nearly as flat as the image in Photoshop. I have made sure my Adobe software is up to date concerning both programs and the camera raw information that can be updated via Adobe.

    The iPad stores the raw photo data, but displays an iPad optimized version of the original image in its place.
    This image is usually an optimized JPEG image, so the quality will not be the same as the raw image file.

  • Images Appear Different When Viewed in Photoshop CS4 vs. LR 2.7

    Hello, I hope someone on this forum can help.
    I have a series of high quality images that are catalogued using Lightroom 2.7.  Many were edited using Photoshop while others were edited in the "Develop" module of Lightroom.  All of the images look exceptional in both Lightroom and Brdige.  However, when I open some of the images in PS, either directly from Bridge or by using the "Edit in" command from Lightroom, they appear washed out and dull -- very different and much worse.  I always use the setting, "Edit a Copy with Lightroom Adjustments."  The problem pertains to all images regardless of file format (JPEG, DNG, NEF, etc.) and regardless of whether they are opened from LR, Bridge or directly from the image using the "Open with" command in Windows.
    This happens on two completely different set of monitors.  At work I have a Dell 2208 WFPt UltraSharp monitor, and at home a dual monitor setup with an Asus VE278Q and an LG flat screen (all are flat screen, high quality monitors).  I have a Lenovo X201s with 8gb of RAM and a high-speed i7 processor running Windows 7, 64-bit.  All of my Adobe products are up-to-date.  Windows Color Management shows all displays as "Generic PnP Monitor - Intel HD Graphics," and the Advanced mode of Intel's HD Graphics correctly identifies each monitor being used.  The problem is identical regardless of which monitor is being used and it does not seem to make any difference as to which color profile is associated with the monitor (I have two profiles added -- Adobe RGB (1998) (the default) and sRGB IEC61966-2.1).
    Specifically, if I double-click on a particular TIF image in Bridge (where the preview looks great), it then triggers Camera Raw 5.7 - TIF, where again the image looks terrific.  The settings applied by Camera Raw are "ProPhotoRGB; 16 bit; 3607 by 2420 (8.7MP); 300 ppi" (although changing these settings makes no difference whatever when the image is subsequently opened in Photoshop).  When the image is opened in Photoshop it looks terrible -- dull and washed out.  I encounter the exact same problem when using my dual monitor setup at home, so I don't think monitor calibrations are the cause.
    Strangely, I don't think this problem existed a couple of months ago.  I've been busy on a project and haven't used Photoshop since the end of this past July (of 2011).  As I recall, this problem did not exist then, so I'm wondering if a setting in Photoshop inadvertently got altered since then.
    I have the following key settings in Photoshop's "Color Settings":
    Working Spaces: RGB -- ProPhoto RGB
    Color Management Policies -- Preserve Embedded Profiles
    Conversion Options -- Adobe (ACE)
    I have the following key settings in Lightroom's "Preferences / External Editing":
    Edit in Adobe Photoshop CS4
    File Format -- PSD; Color Space ProPhoto RGB, 16-bits, 300 dpi
    File Format -- TIFF; Color Space ProPhoto RGB, 16-bits, 300 dpi
    I have tried and tried to figure this out, to no avail.  Any help would be greatly appreciated!
    Bob Woods
    St. Paul, Minnesota

    Thanks, I think you're right.
    Any suggestions for a cheap and easy way to calibrate my monitors?

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • I ran MacKeeper and demo'd my wife's iPhoto archive bigtime: RAW files appear corrupted and lotsa pix w/no thumbnails or "!" marks instead. Help!

    I ran MacKeeper and demo'd my wife's iPhoto archive bigtime: RAW files appear corrupted and lotsa pix w/no thumbnails or "!" marks instead. Help!

    Should I take it that recco'd means 'recommended'? Still have no idea what demo'd means in the context you use. I've often seem it as an abbreviation for 'demonstrate' but that makes no sense. The problem with idiosyncratic abbreviations is that other people don't understand them.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Nikon D4s files appear as generic icons in Bridge 6

    Our Nikon D4s raw files appear as generic icons when viewed in Bridge 6. I have downloaded Camera Raw version 8.7.1, which lists the Nikon D4s as supported
    . I also have the latest Nikon Transfer software. I read one message recommending to purge the cache, but no luck. I also restarted after the downloaded software, and re-downloaded the raw files from the memory card. Any ideas?

    Hi Yammer.
    First thanks a lot for taking your time to help me. I am really happy about it!
    I will try to answer:
    1)
    I meant by having the Camera Raw.8bi placed in BOTH "C:\Programmer\Adobe\Adobe Bridge CS5\Plug-Ins" and in C:\Programmer\Fælles filer\Adobe Plug-Ins\CS5\File Formats" the ACR will be found in two versions - or rather in two places (I know the former shouldn't be, but it solved my preview problem).
    2)
    YES - I do have tried twice starting the Adobe Bridge holding down the Ctrl-key and ticking the two (the third was greyed out but ticked anyway) and with no help.
    3)
    I have tried to do the *.8bi search you suggested, and this gives me the following dump - absolutely with a few more entries than yours. Some are like doubled.
    Do you think I can just delete these?
    Kind regards, Jan

  • Raw file thumbnail and preview problem in Bridge

    When downloading raw files from my new Nikon D3, Bridge generates thumbnails that are a fixed size and the preview panel only shows a thumbnail as opposed to enlarging the image to fit the preview panel. Thumbnails and Preview still work fine with jpegs. My versions of CS3, Bridge and Version Cue are up to date, I believe.
    Thanks...

    Three things:
    • You need to make sure you have updated to Photoshop 10.0.1, Bridge 2.1.1.9 and Camera Raw (ACR) 4.6.
    • You need to purge the cache for the offending folders through the Tools menu in Bridge.
    • You need the Bridge forum:
    http://forums.adobe.com/community/bridge/bridge_macintosh?view=discussions&start=0#
    Please post there if you need further Bridge help.
    Raw files from the D300 are not supported by the old, obsolete version of ACR that gets installed by default by CS3.  What you're seeing now is the embedded JPEG preview only, not the converted raw.   That's why you have to upgrade to ACR 4.6

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    hi there,
    try booting into safe mode, by pressing the Shift button once you hear the startup sound.
    Hope this helps,
    Chris

  • Color Cast Only On Mac Generated jpg files When Viewed In Bridge Cs3 Preview

    Hi,
    ( Issue With Cs3 Bridge Viewing Jpgs - Getting Colour Cast on the Mac Generated Jpgs Files Only When Viewed In Bridge Cs3 On PC )
    Using  CS3 creative suite Mac & PC and viewing all files on the PC.
    We have  psd files when viewing in bridge they are  ok and save jpgs via PS3 both on the Mac & PC off the same PSD file that we started with.
    But when viewing these jpg files in bridge we get a red cast only when viewing from the Mac generated files from the same PSD we started with.
    When we open the jpg files up in Photoshop all of them are ok we no issues only when viewing in bridge we get the red cast.
    All PSD files have the same information content:
    Bit depth
    Colour space
    Pixel size
    Why are we getting this happening.
    Thnx

    Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
    Thanks again,
    Kieren
    EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
    Many thanks!
    Thumbnail view w/o Auto:

  • TableView LINEEDIT works differently when viewed through Portal

    I have a simple table with a few columns of data that I display and allow the user to change a row using the selectionMode = "lineedit".  The columns are all controlled using htmlb tableViewColumns.
    When I test my application from the WebAs the table looks fine.  If a user selects a row they can see the entire amount of text that appears in a column they want to change
    However, when the BSP comes up in our SAP portal and the user selects a row only the first 20 (or so) characters can be seen and the user must use the arrows keys to get to the part of the text they wish to change.  Is this a setting somewhere?

    For the <htmlb:inputField> look at attributes maxlength, size and width.
    <b>width:</b> Determines the text width for the input field. We recommend that you use the size attribute instead of width.
    <b>size:</b> Determines the size of the input field.
    <b>maxLength:</b> Maximum length of the user input.
    I must admit that this documentation is not tell me enough. Will ask on Monday about this.
    As for your remark "works differently when viewed through Portal": You keep in mind that once a BSP application is running with the portal, all stylesheets (*.CSS) files are loaded from the portal server, and not the webAS.
    Now it could happen that you are running an EP and an older (or incompatible) patch level than your BSP stylesheets are at the moment. For EP6, starting from what I remember at SP11, there is planned a technique to install the latest stylesheets from service market place. You ask about this via OSS, queue EP-PIN-?-STY (something like this).

  • Stationary credated in Mail does not appear properly when viewed in Outlook, is there aroundthis?

    Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.

    No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.

  • After processing in CS6 saved jpegs are washed out in when viewing in bridge - Why?

    after processing in CS6 saved jpegs are washed out in when viewing in bridge - Why?

    I have been trying to figure out if I made any accidental changes in Photoshop. So far I haven't found anything. That might simply mean that I don't know all of the places to look. I have called Adobe and been on the support websites and haven't gotten a clear answer. I save as a JPEG with an embedded color file sRGB. Any suggestions on where else to look for accidental changes?
    Everyone seems to agree that iPhoto doesn't work well with Adobe and should be avoided in the workflow. Truly, I had no idea! I just like the simplicity. The Mac store never mentioned problems between the two but did offer to help me purchase Aperture. I will use Bridge from now on to view the images and manage folders.
    Thanks for your message!

  • My images in my welcome page are different when viewed on the internet!

    My images in my welcome template are different when viewed on the internet! After a while they don't change anymore. Isn't this so basic....?

    Please provide your url so someone can see what you are talking about.

  • After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer.  I receive "FIle Save As - Not Responding"

    After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer.  I receive "FIle Save As - Not Responding"

    I think you may be correct.  It is coincidental with my upgrade to Adobe Reader 11.0.10.
    I have installed IE 11 (11.0.9600.17690)
    It may be an Adobe Reader problem in that the "tools/file save as" dialog is completely empty. No local directories are displayed for saving to.   When I try to Close(X) the "File Save As" box it pops up a message box on top that says "Adobe Reader is not Responding"  It locks up all of my IE windows, not just the one with the PDF doc.
    I need to go go Task Manager and stop the IE task.  All my browser windows are then closed.
    That is the only way to recover from the "Adobe Reader is Not Responding" message.

Maybe you are looking for

  • Error while executing servlet through a HyperLink.

    Hi When i am trying to execute a servlet through the HyperLink using this statement where CallStatusDetailsAssign is my servlet.then i am getting this error : The Following is the Alert Message. 1. Microsoft InterNet Explorer http://localhost:8080/ex

  • New firmware for nokia N85

    Hello. I would like if you were lazy people from Nokia have made a new firmware for Nokia N85. It is a shame that for some older models released new firmware. But even so it is only a few cell models of Nokia's touch-type screen. Shame on Nokia. Wake

  • How do I get my iMac AirPort to only lock onto my wirless router and not others?

    Everytime I power up my iMac I have to use the AirPort drop down menu to select my Wi-Fi network from a long list. Is there a way to set my Air Port Preferences so that it always only picks up my Wi-Fi signal automatically? Saving me the time form al

  • Dual 27" iMacs - one as a monitor?

    This may sound like a stupid question, but I want to be sure before I go buying a cable. I am in a unique situation...I just got clearance to work from home at my job (as a graphic designer), and I bought a 27" iMac Core i5. Well, work also got new 2

  • I can't open settings on my MacBook Pro 2013

    I can't open settings.