Tiff Viewer which disables print, copy and save TIFF file

I am looking TIFF Viewer solution which woul disable any print, save and copy functions for a TIFF file. Thisfunctionality is available for PDF but I need to disable print, copy and save for TIFF files.
Would anyone know a TIFF viewer or solution that supports the following functions:
1)      TIFF viewer where we can turn off any options to print the TIFF file or save it to disk. That would include disabling any options where the user could right click on the TIFF and save the file somewhere else.
2)      It would need to be able to open multi-page TIFFs.
3)      It would be nice if the TIFF viewer could be run on both Mac and Windows platforms.
I need to send files to users for view only, and these should be in TIFF fomat, not converted into a PDF.
Thank you for your help.
Regards,
Sapna

The same answer applies to any kind of file.
You need a Digital Rights Management solution. Very expensive.

Similar Messages

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Disable the Copy and Paste option in keyboard [Textbox control] Windows phone App

In Windows phone 8.1 WRT app, I want to disable the copy and paste option in the keyboard for the textbox control
Please let me know if any possibilities and if you have the code snippets Please share it .

Hi Ruthradevi,
As I know we have no way to disable the copy and paste option in the keyboard.
Why do you want to disable it, can you explain more about your scenario? Let's see if we can make a similar function like you required.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Copy and save pictures from slideshow

I have a dvd slideshow of my wedding pictures and I need to know if I'm able to copy and save each picture within the slideshow using adobe photoshop elements 5.0, can I?

Sorry to disagree but this isn't right.
I copy and paste on my PC and it works just fine to view on anything so if what you're saying is right then it would surely do the same on a PC.
Aslo it IS saving the image in the body of the ad because if I view it on another mac it displays correctly.
I'm not sure what you mean by you upload the pictures at the end. I want to type a bit about the product, then have a picture, then type some more and maybe put some more pics. Like this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180637405596&ssPageName=STR K:MESELX:IT#ht1600wt1141
or this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180635082165&ssPageName=STR K:MESELX:IT#ht1266wt1141
The only difference here is these were created on a PC.
I must add on thing though. When I'm trying to add the pictures, I have them open in "preview" and I crop them by using the instant alpha cutting tool. Then I copy and paste it. I've even tried savingit as a jpeg file and a bmp file and makes no difference.
Thanks
Mark

I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

Your drive is formatted with the NTFS file system. OS X can read but not write to the NTFS file system. There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition. I have not tried them and don't know if they work.
The only file system that OS X and Windows can both write to natively is the FAT32 file system.

Disable the copy and paste

Hi,
can any one tell how to disable the copy and paste functionality of the text items in the forms 11g.
Advance Thanks.

Change the item type from TEXT to DISPLAY. If you want the user to be able to type in the field, it will be difficult to prevent copy/paste. It might be possible with a PJC.

How to create and save a file in flex web application ?

Hi,
I want to create and save a file form flex web application. Is it possible ?
I have done some googling and found that its only possible through file referece, which needs some serverside implementation be called.
Is it not possible with file reference to create and save file directly ?
Can any one suggest how to over come this.
Thanks in advance.

Alex,
code written with the Flex Builder 3 libraries will certainly run in Flash Player 10. However, what you need is not so much the capabilities of FP10 but the library functionalities of the Flex 4 package. And I think that Flex 4 code will only run in FP10 and not 9 (but haven't tested this as at work we have not yet been permitted to upgrade, so there is not a lot of point going for Flex 4!).
Richard

HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps.

How does APEX create and save new files. What extension does it save in?

Hi can someone help me with this question?
How does APEX create and save new files. What extension does it save in?
Cheers!
VJ

It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

HT201250 I accidentally didn't save a document on my desktop--a report. Can I go back with time machine and recover my desktop and save the file?

I accidentally didn't save a document on my desktop--a report. Can I go back with time machine and recover my desktop and save the file?

If you saved it at least once, then time machine should have a copy of the document at the state you last saved it. I'm guessing tha's not the case however or the copy of the file would still be on your Desktop.
If you never saved it a single time, yet closed the window and dismissed the warnings about an unsaved document, then you are out of luck as far as I know.

I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

Here is the download page

Open and Save Excel Files

Hi All,
I need code of How to open and save excel file in local system in Oracle forms.
With Regards,
Chandra Shekhar

Hello Chandra,
Webutil can be used to achieve this functionality.
STEPS TO FOLLOW
================
1. Install and configure Webutil following instructions in the webutil manual
and the readme file.
2. Create a form with a block Eg. DEPT
3. Create a button, and in that button put the following code -
DECLARE
application Client_OLE2.Obj_Type;
workbooks Client_OLE2.Obj_Type;
workbook Client_OLE2.Obj_Type;
worksheets Client_OLE2.Obj_Type;
worksheet Client_OLE2.Obj_Type;
args Client_OLE2.List_Type;
cell ole2.Obj_Type;
j INTEGER;
k INTEGER;
BEGIN
application := Client_OLE2.create_obj('Excel.Application');
workbooks := Client_OLE2.Get_Obj_Property(application, 'Workbooks');
workbook := Client_OLE2.Invoke_Obj(workbooks, 'Add');
worksheets := Client_OLE2.Get_Obj_Property(workbook, 'Worksheets');
worksheet := Client_OLE2.Invoke_Obj(worksheets, 'Add');
go_block('dept');
first_record;
j:=1;
k:=1;
while :system.last_record = 'FALSE'
loop
for k in 1..3 /* DEPT has 3 columns */
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
j:=j+1;
next_record;
end loop;
/* For the last record */
for k in 1..3
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
Client_OLE2.Release_Obj(worksheet);
Client_OLE2.Release_Obj(worksheets);
/* Save the Excel file created */
args := Client_OLE2.Create_Arglist;
Client_OLE2.Add_Arg(args,'d:\test.xls');
Client_OLE2.Invoke(workbook, 'SaveAs', args);
Client_OLE2.Destroy_Arglist(args);
/* release workbook */
Client_OLE2.Release_Obj(workbook);
Client_OLE2.Release_Obj(workbooks);
/* Release application */
Client_OLE2.Invoke(application, 'Quit');
Client_OLE2.Release_Obj(application);
END;
4. Save the form and compile it.
5. Run the form.
6. Execute the query in the block.
7. Click on the button.
8. An excel file will be created in the d:\ directory by the name test.xls.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

Copy and paste a file please help.

i want to copy and paste a file to a different directory.
if i use the .renameTo() it cut and paste the file.
what is the right method?
killuasoft

do you have an example?Yes, several in fact my good man.
You may find them here http://java.sun.com/docs/books/tutorial/essential/io/index.html

How to capture a .gif file from a spectrum analyzer and save the file in PC

I want to capture a .gif file from a spectrum analyzer and save the file in PC, but I've got a problem when read data from the instrument. I'm not sure how to format the string got from the instrument , When I use "%s" or "%t" as the read string format the data got from the instrument is truncated.
my code are as follows, could anyone tell me where i am wrong?
char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%t", resultsArray);
printf("%s", resultsArray);
getchar();
Solved!
Go to Solution.
Attachments:
readResult.docx ‏50 KB

char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%b", resultsArray);

Tiff Viewer which disables print, copy and save TIFF file

Similar Messages

Maybe you are looking for