Tifs sometimes open in CameraRaw in Bridge and sometimes in PS

I would like my tif files in Bridge to open the Camera Raw menu. Sometimes when I double-click on a tif it opens in CameraRaw in Bridge and other times tif open PS.
Can anyone help, please?
jon

Rob
There are actually 3 places for those settings. In the PSCS prefs, in Bridge prefs Camera Raw and Bridge prefs itself.
But it is very confusing. Every now and then I have the choice with right mouse button to choose to open them in ACR but after fiddling around with one of the settings it is gone again. I do believe that after a complete refresh with manual delete of Bridge and ACR cache files, bridge plist file and using option key with restart to refresh prefs the setting in Bridge prefs leaves you with the fly out menu choice in Bridge, and also double click in Bridge itself.
Using all three options opens a tiff and jpeg also when using the finder and that is for me no option.

Similar Messages

  • Opening .NEF files in Bridge and converting them to .jpeg files for Photoshop CS3

    I currently have CS3 on one of my computers, and CS2 on my other.  I cannot open my .NEF files into Photoshop, even after I try to convert them through image processor.  It tells me that it cannot be done.  On one of my computers, I cannot even open the images in Bridge.  I know that my programs are outdated.  Do I need to download something to make it all compatible and begin to work?

    Which Nikon camera are the NEF files from?

  • Images won't open in PS from Bridge and Camera Raw.

    I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

    Mullit wrote:
    I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
    This sounds serious.  I would make sure you have a backup on a seperate hd or disk or you photos and other documents.  If the drive fails you may loose everything on the hard drive.
    Check your free space and fragmentation on hd.  You should have about 20% free space.  So if you have a 400 gig drive you should have 80 gig free.

  • Can't open Camera Raw from Bridge CS3

    Need Help with the following issue. Until recently I was able to open & edit camera raw files in Bridge CS3. Tried to update Bridge from Adobe website and all of a sudden the "open in camera raw" option under File is greyed out. Also right-clicking the raw (CR2) file does not allow me to open the file in camera raw and I can't view the files as thumbnails any longer. When I double click the file Photoshop opens and subsequently camera raw. I have really lost the convenience of opening the file in Bridge and I'm afraid my workflow will suffer. Any help would be appreciated. I am running Windows 7. Thanks.

    I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

  • In CS 5 I am able to open all files from Bridge but is PS CC I can only open .tif files

    In CS 5 I am able to open all files from Bridge but in PS CC I can only open .tif files, all other files I get file not found. What is wrong?

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/bridge
    http://forums.adobe.com/community/photoshop

  • How do I open my TIF file into Camera Raw from Bridge?

    Trying to follow a tutorial on editing an HDR image in photoshop. When instructed to open the TIF image into Camera Raw from Bridge, I don't get the option when I right click. What is going on here?

    I was talking about an advanced action, which is not loaded externally but executed on runtime (will be translated to AS). So this will only work if you can pass the value of the variable containing the slide number you want to the SWF. For that you'll need JavaScript and I'm not that acquainted with JS. Have a look at Jim Leichliter's blog:
    http://captivatedev.com/series/captivate-javascript-series/
    In Captivate you create an advanced action to be triggered on entering the first slide, that will jump to the wanted slide number. If you can figure out how to pass the slide number, could help with the advanced action, I know them rather well:
    http://lilybiri.posterous.com/micro-navigation-in-adobe-captivate
    Lilybiri

  • For photography I have CS4, Lightroom 5.3, I use Bridge and sometimes NIK and Topaz Plugins. If I want to update to CC, what is the plan I need? Will all of my Lightroom history data be retained?

    For photography I have CS4, Lightroom 5.3, I use Bridge and sometimes NIK and Topaz Plugins. If I want to update to CC, what is the plan I need? Will all of my Lightroom history data be retained?

    Probably the special photography plan - Creative Cloud pricing and membership plans | Adobe Creative Cloud
    For details on any program, you should ask in the forum for that program
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera R

    I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help > updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera Raw is only version 7.1.  I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW!  Please Help!

    Did you fix your issue?  I am having the same one

  • New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In requir

    I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

    When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link  https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
    Also this is a user forum not a Adobe Customer Services web site.

  • I can't open CS5 in windows 7 it tells me "Programm is locked or you are not legitimated". Bridge and Camera draw are working ok

    I can't open CS5 in Windows 7. It tells me "application is locked or you don't have legitimation". Bridge and Camera Raw are OK.

    Hi,
         thank you for your answer.
         The original Text photoshop showing me is the following:
         Konnte ein Arbeitsvolumen nicht öffnen, weil die Datei gesperrt ist
    oder Sie keine ausreichende Berechtigung haben. Heben Sie den Schutz
    der Datei mit Hilfe des Befehls 'Eigenschaften' im Windows Explorer
    auf.
         Sorry I can tell you this only in German. 
         After Installation the Version 64 Bit couldn't work because of this
    sentence (Windows 7 has 64 Bit Version). The 32 Bit Version worked
    without problems. The next day both versions didn't work because of
    this Informatiom. Bridge and Camera raw workinjg perfect but photoshop
    (CS 5) is blocked.

  • HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no ma

    HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no matter what work I have done, inc cropping they  all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to  yesterday, when this first started.
    I recently changed computer to 64bit from 32bit, not sure if this causing  the problem or not. Any help would be appreciated.

    Robert,
    Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals?  Sorry, I can't quite follow you.
    Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
    Thanks.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

  • Browse in Bridge from Photoshop CC 2014 fails to open Bridge and wants to install new version

    Hey community!  I found a few similar posts, but couldn't find much of a resolution. 
    Last night I was working in PS CC 2014 and all was well.  Used Browse from Bridge in PS.  Everything is working fine all night long.  Get up this morning, return to work, click browse in Bridge, and Creative Cloud desktop client pops up and says something about installing a new version of Bridge and will get rid of my old version.  The first time I just though it was an update, so I said sure, install the new version.  Then, CC wanted to update a few other apps (PS being one of them), so I closed down everything, and let it update everything while I got a cup of coffee.  Came back and it looked like everything was finished updating.  So I went back to work.  Same thing happens again when I click browse in Bridge.  I tried going directly to Bridge's launch icon and THAT at least opened the application.  It was still open to the same folder I had been using the night before.  I double-clicked on the PSD I was supposed to be working on, and then Illustrator pops up and is trying to open the PSD.
    ***Ok, so I fixed the association problem with Illustrator trying to open the PSD.  I uninstalled my older version of PS CC last night after I was done working, which apparently broke the "file associations" in Windows.  I just had to go tell Windows to open PSD files with PS CC 2014 (even though 2014 has been installed since it's release and that's all I've been using)***
    Still can't get around the Browse in Bridge issue.  It is not a real big deal TO ME where I click to open Bridge, but it does seem like a bug that needs fixing.
    Thanks!

    I have the same issue when trying to Browse in Bridge from Photoshop CC 2014. When I click "Browse in Bridge" in Photoshop CC 2014, the Creative Cloud desktop client window opens up and asks "Are you sure you want to install this version of Bridge"?
    Like you, I also thought it was an update so I clicked' "Yes, install this version" option.
    Bridge will launch from the dock icon I have set up, but not from within Photoshop CC 2014.
    Any solutions to this bug anyone?

  • I have a new Sony alpha 77ii.  My PS version is 5.0.  When I open the files in Bridge, they are .ARW files.  How do I convert them to JPEG's so I can view and edit them?

    I have a new  Sony alpha 77ii.  My PS version is 5.0.  When I open the files with Bridge they are .ARW files.  How do I convert them to JPEG's or something I can view and edit?

    You can use Adobe's free DNG converter to convert proprietary raws to the universal DNG raw format. Here are the links:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 9.0
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 9.0
    Converting to JPEG will be an extra step afterwards.
    Benjamin

  • My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

    My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
    The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

    You need to force quit all other (real or fake) instances of the Application Manager.  Instructions differ between Mac or Win.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for