Tiger and Epson Stylus Photo 870

I just upgraded to 10.4.11 from 10.3.9. My Epson Stylus Photo 870 (USB connected) was working fine under Panther. However, now with Tiger, I can't get it to print. It still works fine in Classic mode. Had the same problem with Tiger and my HP 1200 but, after reinstalling the HP software from the CD, that works fine now in Tiger. Tried reinstalling the Epson software also, but it still won't print in Tiger. What am I missing?

Thanks to all the advice I found in earlier posts. I downloaded and installed the Gimp drivers and everything works correctly now.

Similar Messages

Problems printing using iPhoto and Epson Stylus Photo R2400

I'm using OS 10.5.6 and iPhoto 8.0.2(402) to print pictures on my Epson Stylus Photo R2400.
I have other printers set up on this computer and they all print everything just fine regardless of the program I am using.
Using the Epson Stylus, I'm able to print from any other program than iPhoto.
When I try to print pictures from iPhoto, I get the error message...
can't open ` /private/var/spool/cups/tmp/4a18c65407c9b (the numbers at the end changes each time I try to print.
When I go in to check the folders out to see what might be causing the problem, the permissions on the folder cups and tmp have the following rights set up. system = Read & Write, _lp = No Access, everyone = No Access.
I've been able to set the everyone setting to equal Read & Write access, but I can't get the _lp access to change. When I reboot the computer, the everyone setting goes back to No Access.
Any ideas for how I can get this to work?
Thanks,
Bill

Welcome to the Apple Discussions. I don't have a tried and true fix for that but I would start with dumping the printer driver via the System/Print pane and then reinstall it. Go to the Epson site to download the latest driver for that particular model in case there's a newer one released.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Anyone else having difficulty with Adobe Photoshop CC and Epson Stylus Photo R3000?

Everytime I try to print an image from Photoshop CC to my Epson Stylus Photo R3000, it can't seem to find the printer. I have no problem printing the same image from Lightroom 5 or Preview on Mac. The printer shows in the Photoshop Print Dialogue box but after I click Print the print queue just says searching for printer and can't find it. I can print a test page from the printer Utility and anything else I try, just not Photoshop CC. I'm running OSX 10.9 Mavericks. Thanks.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

Using iMac, Aperture 3, and & Epson Stylus Photo R1800 printer: How come my prints look like trash?

I have calibrated my iMac Intel Core i3 and printing through Aperture 3 with an Epson Stylus Photo R1800 is not producing great results. Cyan is dominating along with blue lines through the grass in the picture. I figure the lines are a result of clogged head...but the fact the prints are not close to the image on the screen is alarming. HELP!!!

SFSteinie,
There is an Aperture forum, I'd recommend reposting there and perhaps another R I 1800 users has some insight you may not know about.

Mavericks AND Epson Stylus Photo R280-driver?

I just removed one EPSON Stylus Photo R280 and plugged in another one of the same model. Can't find the printer when I send something to print, so I deleted the printer from my printer list and then added it back. It wants to go to the Apple server and get the software, which it says is available. When I hit add, it looks and says software is not available. The old printer was runnning printing fine, so obviously there is a driver. How do I get it to recognize it?

What if you try deleting the /Library/Printer/EPSON and the/Library/Caches/Epson/ folders and then reinstalling the updates?

IPhoto 6 and Epson Stylus Photo 2200 Printer

The photos that I print from iPhoto 6 to my Epson 2200 printer are all coming out way too green. What settings do I need to use in the print dialog -- and color management? -- to get decent results? I can print beautifully from Photoshop CS2 to the 2200. I just can't figure out what settings to use in iPhoto. Thanks in advance for your help with this question. _sidpink
G5 Tower Mac OS X (10.4.6)

Kingstone's reply was helpful even though a little discouraging. But it made me realize that the problem probably lies with the choice of which software is doing the color management. The Epson 2200 printer driver provides some "advanced" settings in the print window, and I had been specifying "No color adjustment," because that's the setting recommended when printing from Photoshop. I had simply been trying the same setting when printing from iPhoto. But I went back and printed a photo from iPhoto using the "Color Controls" setting (without changing any of the variables), and the print came out perfectly! So I've answered the question to my satisfaction thanks to Kingstone's reply -- and I don't have to go out and invest in Photoshop Elements.
G5 Tower Mac OS X (10.4.6)

Lightroom 2 and Epson Stylus Photo 1280

Using the latest Epson drivers, I am unable to access the color management settings in the Print Dialog Box now that I've updated to LR2. The latest version of Gutenprint (5.2.0 beta3) intermittently displays the Printer Features which mimic the Epson driver color settings, but are too complex even when they do display.
Adobe states it's Epson's issue and old drivers. Epson has no suggestion other than talking to Adobe.
This is running on a Intel MacBook Pro under OS X 10.5.4
Does anyone have any suggestions beside getting a newer printer?
Thanks

Here are two threads that may address your issue and possible workarounds.
http://www.adobeforums.com/webx/.59b6204d/4
http://www.adobeforums.com/webx/.59b601c4/0

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

Airport Extreme and Epson Stylus Photo R260

I continue to get a communication error and am unable to print to my R260 through the Airport Extreme hub. Running the latest drivers from Epson, and version 5.3.2 firmware on the Airport Extreme. Airport Extreme show the R260 in its Printer Settings, and the printer shows up in all application print dialogue boxes.
I noticed that Version 5.3.2 (which automatically downloaded and installed on my Airport Extreme), is not rated for Mac OSX 10.4.9. Could that be my problem? If so, is there any way to downgrade the firmware on the Airport Extreme?
Thanks,
Daniel

I found all the old firmware through the apple downloads page. Yes, you can go back to 5.3.1

The part "scanner" of my all in one printer epson stylus photo PX 720 WD is not on duty and no driver ready to use some informations about drivers epson and mavericks ?

some news for drivers os x mavericks and epson stylus photo px720wd ?
the part "printer" is ok
the part "scanner" is of duty because no driver found
thanks

Try using the pre installed Image Capture app in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

WIFI scan Epson Stylus Photo PX710W does not work under OS X 10.9 (Mavericks) and

Since yesterday (27/10) i have installed OS X 10.9 (Mavericks) on my iMac. Now there is a problem with my Epson Stylus Photo PX710W. I cannot scan via WIFI. It seems that the problem is with the scan.app version 3.7.1. I can oly scan via USB and cable, but that's not why I bought a WIFI printer/scanner for.
Is there anybody who can offer me a solution for my problem?

WE HAVE GOT HIM.
MAVERICKS driver for for wireless scan with EPSON STYLUS PHOTO PX710W.
Available on http://www.epson.nl/nl/nl/viewcon/corporatesite/support
Choose 1 - All in one printers
Choose 2 - EPSON STYLUS PHOTO PX710W
Choose 3 - Mac OS X - Power PC
Confirm selection
CHOOSE Direvers and software
CHOOSE the file EPSON Scan (3.761) - 24,07 MBps - 21-22-2013
Download and install AND BE HAPPY, IT'S WORKING AS BEFORE.

HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon? I tried "Software Update" and says "no update available"

How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon? I tried "Software Update" and says "no update available". I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

Well, this seemed to work.. can't believe it! After a year of messing with this!
from Stevejones5
"I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library. (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

Photoshop CS3 with Epson Stylus Photo 1400 and Mac Leopard

I have Adobe Photoshop CS3 and an Epson Stylus PHOTO 1400 printer and Mac OS X 10.5.4.
When I print a photo it comes out with excessive ink which smears very easily and has lines in it. It only does it in Photoshop. When I print from any other program it comes out fine. I've seen reviews online where people have printed from Macs and photoshop onto the printer and it worked. I've already contacted Epson, but they said to contact Adobe. Does anybody have any advice?

Forget Epson's useless tech support.
What you describe is typical of improper printer profile or usage of non-Epson paper, especially paper with gloss. Have you profiled the printer/paper and are you using Epson paper (or other paper and profiles specifically recommended here for Epson photo-quality printers) properly selected?
Like Ramón I am on 10.4.11, not 10.5.x, but I doubt if your described problem is due to the OS version.

Tiger and Epson Stylus Photo 870

Similar Messages

Maybe you are looking for