Tiger Compatability with Final Cut Express

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

I installed FCE on my Macbook and my iMac but when they are open at the same time and I'm connected to the internet the last one to open says I have to quit because of a"Protection Error".
Is there a way around this so I can work on two projects at the same time???
Pete

Similar Messages

Canon HV20 Compatibility with Final Cut Express

I cannot get the latest version of Final Cut Express to work with my new Canon HV20 video camera. I can get the video into iMovie 08, but nothing I try can get Final Cut Express to recognize the camera. I cannot import the imovie file either. It gives me an error. I can drag the video from the Hard Disk to Final Cut Express to import it, but that is cumbersome.

Start here:
http://www.fcpbook.com/Video10.html
Then come back and do this:
Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in FCE, and finally what version of the software, of the OS, and of QT are you using?

Sony HDR-SR12 compatibility with Final Cut Express

I'am having few drop frames when transfering in FCE. Somebody knows what the settings for tranfering in HD-FH 1080i.
Thanks

Wrong forum...try here:
http://discussions.apple.com/forum.jspa?forumID=936
Shane

Compatibility issues with Final Cut Express and Final Cut Pro

I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.

{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

Can Motion be used with Final Cut Express?

I am needing to add a little more advanced graphics and I am wondering if I bought Motion, would it be able to work with final cut express HD or would I have to upgrade to the final cut studio pro suite?
Any suggestions or advice would be greatly appreciated.
Thanks!

Hi(Bonjour)!
Be careful with used copy, Motion 1 and 2 were sold as single product in the past, not from a editing suite like Final Cut Studio 2 or 3. There was an upgrade from Apple: Final Cut Studio 5.1 that gave the intel support for those applications included in studo bundle. So, used earlier version of Motion may be not usable on your intel mac without the FCS 5.1 upgrade.
The graphic processor card compatibility must be checked too.
I would go with a used copy of Adobe After effects, may be 6.5 or 7.
Michel Boissonneault

How do I import an AVI file for use with FInal Cut Express

How do I import or use an AVI file with Final Cut Express?
Thank you. Do I need to convert my AVI file and what is the
easiest way to do that? Thank you.

You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

How to insert a logo with final cut express 4?

How to insert a logo with final cut express 4? like this
http://www.milano.nl/sbs6_2005.jpg

I'm not certain, but I think, if there's not a background color saved as part of the original file, you'll retain the transparency. Give it a try.
What application are you using to create the original file?

Language Choice with Final Cut Express ...

Hello,
Like many things Mac-wise (Leopard etc), does Final Cut Express give a language option during the instal?
I am in France and would like to have the programme running in English - but those at the Apple store are unsure. I bought Leopard from them and they didn't know whether it was available in English. It turned out that there is a language option ... is that the case with Final Cut Express?
Thanks for your time and help ...

You have the choice of English, French, German and Japanese.
I can't remember whether you get the option to choose the language during installation, but you definitely do afterwards.
You control click the FCE icon and select "Get Info".
Then open the Language menu.
Message was edited by: Ian R. Brown

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

Picture in Picture with final cut express

I am really frustrated. How do a create a PiP (Picture in a Picture) with Final Cut Express This is so simple to do in adobe premier elements. You simple place one object over the other in the time line and drag with the cursor to resize. I searched in the manual, but I could not find any answers. I am relatively new user o FCE, so excuse me if I am asking a silly question!!!

That's the correct way David.
I originally thought you meant you were putting your cursor physically over the clip in the timeline and trying to drag it there, instead of in the Canvas !
Piero has made a free PIP filter that you might like to experiment with :-
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/QuarterPIP.html
Message was edited by: Ian R. Brown

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

What camcorder works best with Final Cut Express?

What camcorder works best with Final Cut Express?

Anything that's DV, HDV, or AVCHD and shhots in a format supported by the application.

Can I use IMovie HD 6.4 with Final Cut Express?

Can I use IMovie HD 6.4 with Final Cut Express?

Hi
Yes and no.
You can't get an editable material over from one to the other.
eg a misspelled word in iMovie project can't be corrected in FCE/P any version.
I use iMovie combined with FCE/P in just one case when there are to many drop outs
on the raw material eg recorded in LP-mode (90min on a 60min tape)
Then iMovie can import in a more forgiving way.
BUT
When this material is moved over to FCE/P the audio parts needs to be rendered
not just one time but whenever any change is done. A very nearv-wrecking and tedious
procedure.
Summary. Joint project should use same platform. In my cases me and friend has
each one full version of FCE4 and an external hard disk that contain the movie
project.
This we exchange with each other to do each the parts that we are on best to do.
Yours Bengt W

Does the DCR-SR62 30GB Sony Handycam work with Final Cut Express hd 3.5?

Hi,
I am a new mac user and I want to get a good camera that will work with Final Cut Express hd, I am currently looking at the DCR-SR62 30GB and the HDR-UX1 dvd both by sony and I would like to know if these to cameras or one of them will work with Final Cut Express Hd. Thanks.

Niether one of these cams are the best choice for FCE. FC can not directly work with either DVD or HD (as in Hard drive) camcorders. You will have to convert and/or rip the output of either camera, giving you an extra work step and perhaps diminishing the quality of your footage
FCE is designed to work with DV/HDV material ... from a tape, throught a Firewire connection
There is software like MPEG Streamclip which will allow you to convert those cam's output to work with FC but if you haven't bought them yet, I would hold off and look at a good quality tape based cam

Tiger Compatability with Final Cut Express

Similar Messages

Maybe you are looking for