Tiger freezes when screensaver runs or any time during the work

Hello everyone!
After I've connected LaCie external hard-drive, Tiger freezes every time screensaver runs. Sometimes it happens at any point during the work without any reason. I can move the mouse (when screensaver is on, though, after I moved the mouse the screen would go blank). LaCie works great and I don't think the problem is in it.
Also, right before this started I'd installed the Mac OS X 10.4.6 update. May be that is the reason. I don't know. I did what is in http://discussions.apple.com/thread.jspa?threadID=487116
In particular, I re-installed Mac OS X 10.4.6 combo update - it won't work. I've done permissions repairment, disk repairment, etc. Disk didn't require any repairments.
I tried disconnecting LaCie it won't help as well. What else might be done before I re-install Mac OS X itself (which I really don't want to do).
Regards,
Sergei
eMac PPC G4 1.75 GHz 768 MB   Mac OS X (10.4.6)  

Since you've restarted and hard reset, the next step is to restore it.  Make sure you have it backed up via iTunes and then setup as new.

Similar Messages

  • IPOD freezes when I run

    Everytime I run my IPOD freezes up. I can reset it but only while standing still. It runs fine after being reset until I start running again. I have tried with and without hold on but it doesn't seem to matter. I have already had to have my IPOD reformatted by Apple once. Does anyone have any ideas on what to do to prevent this. Supposedly the IPOD was fine for running.

    My iPod freezes when I run too. Since the original iPod I was usuing lasted 18 months, even in Iraq, I decided that it was normal wear and tear so I purchased a new iPod. However, this new iPod didn't even make it a 1/2 mile before it froze. I reset it twice and it froze again each time. This is really disappointing and I cannot beleive that Apple does not do anything about this. I can't even get a support tech to talk to me. I have contact the state's attorney general's office to see if there are any other complaints. They stated that a class action lawsuit can be a poosibility if enough people join together.
    I was very happy with the iPod and even solicted other users but this to me is unacceptable. Apple should advertise that the iPod can not handle a simple task as running. They obviously know about this problem but refuse to acknowledge it b/c of the potential to lose so much business as everyone using an MP3 player to run with.

  • On my 4 yer old imac when I run aps/programs or on the net with my Itunes runnig everything runs super slow, turn off itunes all runs fast again, any ideas

    On my 4 year old imac, when I run aps/programs or on the web "with my Itunes runnig" everything runs super slow, when I turn off itunes all runs fast again.  Note I have upated all software.  Any ideas out their.  Thanks William

    2gb of RAM is not a lot for keeping too many apps and the OS running comfortably. Have you tried running with as few apps open as possible at any one time - preferably just the one you are currently using, to see if this improves performance?
    Also, you could launch Activity Monitor in the Utilities folder and it'll give you an idea of what is going on memory-wise.

  • Acrobat X freezes when I run a JavaScript Action after about 200 files.

    Acrobat X freezes when I run a JavaScript Action after about 200 files, batches with less than 200 files work well.  I can watch the Acrobat.exe process in the resource monitor and when the Threads reach about 2000 and the Working Memory reaches 500mb, Acrobat freezes.  The JavaScript creates 2 redaction areas, applies the redaction, then saves the file to another location.  I've tested it on both Windows Server 2008 and Win7 32bit. I'm running Acrobat X Pro fully update to 10.1.10.

    It is possible to have the Redaction tool search for a text string across multiple PDFs without using the "Action" wizard or batch processing. You will have to learn the exact steps to properly set the properties for each string of text. You can also review the items marked for redaction and either accept, remove or adjust as needed each one.
    There are 3rd party tools that can also redact PDFs and they existed long before this feature was added to Acrobat. Appligent Document Solutions Redax..
    Appligent even has a server based product for large amount of files or using watched folders.

  • When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    I solved my own problem. Found spotlight in Lion 7 doesn't seem to like third party external drives and gets hung up and unmounts the drives. Had to go into the spotlight preferences and choose all my external drives to not be searched by spotlight.
      Temporary fix but would love to see apple address this issue in the next version of Lion.

  • Regarding R/3 down time during the INIT Run

    Hi All,
    Please let me know the methods to reduce to R/3 Down time during the INIT Run.
    What happends if the tables( Setup / Update) are not locked in R/3 during the INIT Run.
    Your help would be appreciated.
    Thanks,
    Vijay

    Hi,
    To conclude..
    In Direct delta:
    note that no documents can be posted during delta initialization procedure from the start of the recompilation run in R/3 (setup tables filling job) until all records have been successfully updated in BW: every document posted in the meantime is irrecoverably lost.
    In Queued delta:
    The document postings (relevant for the involved application) can be opened again as soon as the execution of the recompilation run (or runs, if several and running in parallel) ends, that is when setup tables are filled, and a delta init request is posted in BW, because the system is able to collect new document data during the delta init uploading too (with a deeply felt recommendation: remember to avoid update collective run before all delta init requests have been successfully updated in your BW!).
    don’t forget that, regardless of the update method selected, it’s ALWAYS necessary to stop any document postings (for the relevant application) during setup tables recompilation run !
    Hope its clear.
    reward if helpful.
    shylaja.

  • Error when I run report RSCMST to test the content server.

    when I run report "RSCMST" to test the my content server.    I get the error:
    header        HTTP/1.1 401 Authorization Required
                  date: Fri, 05 Dec 2008 20:20:45 GMT
                  server: Apache/1.3.41 (Unix) SAPCS/640
                  x-servertime: 20:20:45
                  x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
                  t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
                  x-serverdate: 2008-12-05
                  x-pversion: 0046
                  x-errordescription: URI signature has expired
                  x-serverid: server="content01.ivo.com.cn";serverPort="1090"
                  x-servertype: SAP HTTP Content Server
                  content-length: 752
                  connection: close
                  content-type: text/plain
                  ~remote_addr:
                  ~uri_scheme_expanded: NONE
    want                 201
    bad           401
    time              17.974
    It seems that the "bad 401" means a http error.    I do not know how to configure it ?
    my content server uses the maxdb,  and http is apache, they are all running on redhat linux ese 5
    who can give me some advices?  thanks

    Victor,
            Looks like a web server authentication issue. I suggest you raise this issue in a basis/ web application server forum,
    Sojan

  • My mac air is re-starting several times during the day, anyone have any idea what I can do to fixed it

    My mac air is re-starting several times during the day, anyone have any idea what I can do to fixed it?

    I was having this problem while still using Mavericks -- it started after a Mavericks update last spring.  During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected.  Its gotten a little better, but still happens to at least one of my devices every day.  Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected.  It's just sloppy, poorly written software for technology that isn't working the way it should.  If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected.  With those turned off on all devices, TC stayed connected to everything for over a month.  The day I turned Continuity back on, all the problems started again.  It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

  • My HD has been replaced and when backing up from my time machine the transferred got interrupted

    My HD has been replaced and when backing up from my time machine the transferred got interrupted. When Mac book booted only half the data. So I erased the hard drive to start again although I now can't restore from my time machine  as its saying not enough space on HD to restore. Please help coz I'm freaking out!

    I seriously doubt that you can do that. I've never heard of anyone doing something like this. I also strongly suspect that that windows software didn't preserve all the resource fork, ownership and hard links correctly.
    You are left with manual migration of your data back to your computer. this isn't as hard as you make it sound. You just need to copy you own stuff back. also use the following [post|http://discussions.apple.com/message.jspa?messageID=6185507] to migrate important parts of you user library, Mail, iphoto etc. You will have to reinstall your applications by hand.

  • My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

    My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

    Maybe:
    iOS: Troubleshooting Messages

  • Is it possible to hide the yellow box that appears when you scroll over any object in the form?

    Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

    Hi,
    Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
    Try clearing that.
    Bruce

  • FaceTime freezes when same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

    FaceTime freezes when I call my son's iPad. Calling his iPhone in the same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

    Thanks Mario, but I tried everything there before posting my question. I may not have been clear in my question since I accidently recorded the whole question as the title and tried to edit. In brief: I have no trouble connecting with my daughter's iPad or my son's iPhone. However, his iPad is sending much higher resolution pictures and we disconnect after about a minute.  Oddly, he can hear and see me while my screen first freezes, then goes black and gives me a message of "reconnecting" until it quits trying and shows the buttons to end or redial. The picture quality difference is what is leading me to believe it is bandwidth related. However, I get anywhere from 5 to 10 MB download speeds; usually closer to 10. Last summer, I had 4 granddaughters on their iPads, a grandson on his gaming device and me on cell phone or pc, all using the bandwidth at once with no complaints. If there is a way to lower his outgoing resolution, I think that would help.

  • The events of the last month have suddenly disappeared.  I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Possible to retrieve ???v

    The events of the last month, with the photographs have suddenly disappeared from the iPhoto Library.  I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Is it possible to retrieve ???

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

    My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

    Rasco1 it sounds like your managed network needs to be configured to allow you to download successfully.  You can find more details in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • When i run my program, i get the following Error:

    " Error 7 occoured at Open File+.vipen File.
    Possible reasons:
    Labview: File not Found .
    or
    NI-488: Non-existent board.
    Please Help?

    In my experience it usually happens when one of my sub VIs is trying to open
    a file and can't find it. (We don't use the NI-488 boards, so for us, the
    error is due to a problem opening a file. If you are using GPIB boards, the
    problem might be due to a missing GPIB board.)
    Hope this helps.
    Jim
    matrix wrote in message
    news:[email protected]..
    > When i run my program, i get the following Error:
    > " Error 7 occoured at Open File+.vipen File.
    > Possible reasons:
    > Labview: File not Found .
    > or
    > NI-488: Non-existent board.
    > Please Help?
    >
    >

Maybe you are looking for

  • Safari keeps unexpectadly shutting down

    Hi, I'm a completely new mac user; I just bought this Macbook Pro 2 hours ago and I couldn't be happier! What an amazing machine!!!! Safari keeps shutting down randomly on me though..anyone know why that is?

  • Looking for Source Codes

    hi everyone! I am looking for source codes with the following characteristics: - significant data processing (like fft or image processing algorithms) - use of just a few classes and/or packages (it must not use awt or swing) - code is not so big (20

  • Page open in a new tab but i do not want a new tab and I made the selection in tools

    I have a new tab opening when I have unselected open new tab in a new window. I do not want a new tab

  • How can i combine the JTabbedPane with JSplitPane?

    there is an example in Notepad++,where when 2 or more tabs are open,we can right-click the tab and choose the "go to another view" command.it's so good that we can check 2 files in two views. so i wanna know how to implement this function in java?and

  • Sales order specific GL accounts

    Hi Friends, I would like to have separate revenue (ERL) GL accounts (VKOA) for each sales order. Reason behind this is, I am treating each sales order as one project (PS). My client wants to have separate GL's for each project. Can anyone suggest me