Tiger install failed

I recently installed a new hard drive and tried intalling tiger. But, I think I forgot to choose a volume for start up and now all I get is the gray apple icon and the spinning wheel. What can I do to get back into the installation procedure, if anything?

Somethng's screwy with your post. If you installed Tiger (maybe you tried, but were unsuccessful) you had to select a volume on which to install it. After the installation process completes, the installer automatically selects the volume you install it on as the startup disk so that you have to go through the setup process. Apparently, the installation wasn't successful and you should follow Camelot's suggestion.

Similar Messages

  • After kernal panic, zeroed HD but Fresh Tiger install fails...

    Our little brave 12" PowerBook G4 started to behave a little odd today.
    It all started with iTunes being empty all of a sudden. And when I tried to import the old playlist, iTunes [9.2] crashed. Did this a few times when something started nagging in the back of my head. So:
    1 - I made a backup.
    2 - PRAM startup wich gave me a black Darwin screen with a few lines like this:
    hfs_swap_BTNode: record #1 invalid offset (0x4050).......
    3 - started up in Target modes on my MacBook
    4 - Did a Disk Utility repair which failed [keys out of order]
    5 - DiskWarrior gave me while writing the replacement directory [ error code (2351, -36)] 3 times, the 4th time it went ok and rebuild the disk
    6 - tried starting up and it gave me a black screen again with a bunch of lines and the last line saying:
    waiting for remote debugger connection
    7 - I did another round of PRAM restarts and gave me another black screen with the ultimate line:
    Panic: We are hanging here...
    8 - So I took the Tiger installer disks and ran a Hardware Test. Which it passed succesfully.
    9 - Then I zoroed the HD with the Disk Utility on the installer DVD
    10 - Tried to install a clean install of Tiger but it failed giving me:
    There were problems installing the software
    Any ideas?

    Let me suggest you try:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu. (May be the Installer menu on Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to APM then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Once the formatting has completed quit DU and return to the installer. Complete the installation.
    I would do a thorough cleaning of your Tiger installer disc beforehand.

  • I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

    I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
    After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the  install fails reporting "insufficient memory".
    I assume the installation requires more memory than the OS actually needs to be able to run.
    I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

    Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
    The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
    You need much more RAM than that.
    Leopard system requirements:
    http://support.apple.com/kb/SP517

  • Help with botched Tiger install from failed 10.5 upgrade

    I had Tiger on my Macbook then a mate lent me his OSx 10.5.6 installation disc. Big mistake!
    I loaded this new OS on the Macbook but the iMail wouldn't work.
    I then went back to my Apple-purchased 10.4.8 installation discs and tried to reload OSx 10.4.8, following the on-screen instructions for going back to 10.4 from 10.5.
    Disc 1 of the 10.4.8 loaded fine but was then asked for disc 2 which I loaded. The Install Prog read and loaded from this second disc but the install failed with the error message: "There were errors installing the software, please try again".
    The only option I have is to click CLOSE
    In doing so, the Mac reboots then opens up again on the Install Prog box that asks me insert Mac OSX Install Disc 2.
    I am trapped in this loop and cannot get out!
    How do I fix this and either go to OSX 10.4 or my mates OSX 10.5???!
    HELP!!!

    When I tried to do exactly what you said, I got the error message "Public can't be modified or deleted because it is required by Mac OS X. The only thing I could find in my old Username Public folder was Dropbox and seeing as I never really used this, not having the contents on my rebuilt Macbook isn't really a worry for me.
    I got the same error message when I tried to copy over all the other folders too.
    So I opened each folder in question and copied over the contents of each folder to the contents, i.e. old version to new version (often I had to open sub-folders to copy contents over to sub-folders because I kept getting the "...can't be modified of deleted because it is required by Mac OS X" error message).
    When I'd finished doing this, the folder Oldusername in /Previous Systems.localized/Previous System 1/User still has 4.23GB of stuff in it that I can't copy over but when I looked into the remaining stuff in Old User I found a massive amount of stuff in the Downloads folder which I won't miss.
    I then rebooted and crossed my fingers...
    FANTASTIC - my Desktop data returned and EVERYTHING SEEMS GREAT!!!
    Just to be on the safe side, I ran REPAIR DISK PERMISSIONS on the parent 186.3 GB Toshiba disc on the left hand side of the Disk Utility and then rebooted again.
    THANK YOU SO VERY, VERY MUCH!!! Phew!!!
    So both my Macbook and my iMac are now running the same version of Mac OS X 10.5.8
    However, why is it that the Mail on my Macbook allows me to open Preferences no problem at all but the Mail on my iMac won't let me do this??? This is a real pain as I want to add a new account to my iMac Mail as well as alter some signatures and set up some new rules.
    Any suggestions?
    I'm running Mail version 3.6...

  • Tiger  installation fails-Error Message 'there areerrors while installing'

    Hi there!
    I have just bought a new Tiger 10.4 full version (4 cds) and tried to install CD1 but everytime, i pass the disk verifying of CD 1 , then when it installs on the HD, i get an error message saying 'there were some errors while installing to your hardrive' .... everytime i have to reboot on older version Mac OS 10.2.8
    Any help highly appreciated! Thanks
    Apple G4 IMAC   Mac OS X (10.2.x)   60 gb

    Two things to try before trying to install Tiger. One, boot the machine with the Apple Hardware Test disk and run the extended tests. If any problems pop up, then you'll have to fix those first. Once you get a clean bill of health on the hardware, boot with the Tiger install disk, select your language, and, when the menu bar pops up, select Disk Utility->your HD, and repair the disk. If that works, then try the upgrade again.
    BTW, are you upgrading a 10.2.8 backup or are trying to do a clean install?

  • Family Pack Leopard install fails G4 Dual 1.2Ghz

    All, I purchased the Leopard family pack and have successfully installed it on an Intel Macbook Pro and a G5 2.3Ghz DP machine - flawless, no problems during installation or after.
    However, any attempt to install on a G4 Dual 1.2Ghz + 2Gb of RAM + just bought a Seagate 500Gb Barracuda internal drive (well within the designated technical requirements), I've tried the following.
    1. Booting the G4 off the Leopard install DVD, I get the following error: Failed Install message = "The Installer could not validate the contents of the Essentials Package...".
    I can never get beyond this point. After receiving this error, the internal disk isn't even recognized on the bus - I have to pull the disk out, put it in an external case to reformat it. I've even tried a low level format and also had Seagate replace the disk thinking it was defective.
    2. I then thought it may be an issue with putting the Seagate disk in cable select mode versus master / slave configuration. The Seagate is the only hard drive in the machine. I have tried both cable select and master/slave configuration - both freeze after install, etc. without fail.
    3. Tried installing Leopard on the G4 by connecting it to the G5 in target disk mode. It installed, but routinely just freezes (NEVER had this issue with Tiger on this machine).
    I do see lots of people posting issues with the "The Installer could not validate the contents of the Essentials Package..." error.
    For the record, after successful Leopard install using technique #1 and #3 - I am also unable to run the Migration assistant - it fails every time with a kernel panic. I'm not having any trouble with the Leopard install media on any of the other 2 machines, nor did I have issues running the migration assistant.
    Any ideas are appreciated. thx,

    themdg - you said you put back your 2-512 original RAM cards and tried to install Leopard and the install failed. But my original, factory-installed RAM was third-party RAM which prevented me from installing Leopard, giving the “essentials” error. Only when I purchased RAM from Apple, and used only that RAM to install, could I get it to work correctly.
    Check your original RAM. If it is not the Apple brand, it may not work because of that, even if it was the factory-installed RAM.
    After I installed Leopard with only the Apple RAM, I added back the third-party RAM and I’ve been running Leopard flawlessly since.
    It seems the installation software, which meticulously checks the installer disk for flaws, should also check the RAM to see if the installation will be successful (i.e., check to see if it is going to produce the “essentials” error) and also check to see if you have enough valid RAM to install, before it begins installation, and to let the user know there will be a problem unless the RAM is changed to valid cards.
    I “assumed” I had enough valid RAM when I first tried to install Leopard because I had a G5, but it had only 256 MB of non-Apple brand RAM (minimum of 512 is required). A direct check of that by the installer and letting me know it was a problem would have saved me a lot of trouble checking lots of other potential problems, like a bad installer disk, a third-party drive, etc., before I figured out it was insufficient and incompatible RAM for the installation.
    I read the minimal requirements for installation of Leopard and probably someone will say I should have checked all those before I tried the installation, but I didn’t, as I’m sure many others have not, because we “assume” Apple had tested it and would prevent us from making any mistake like this.
    Previously Apple made their software and hardware to “just work” by providing error messages before we made an error and we have come to rely on that. But they overlooked this problem on this update. It’s the first time I’ve had a problem with an update from Apple.
    I’m still a loyal Apple user, but I’ll check requirements a little closer with future updates.

  • Mac OS X 10.5 Leopard Install Failed

    Trying to upgrade a Power Mac Dual G5 from Mac OS X Tiger to Leopard 10.5. When I try to install the Leopard Disc, I keep getting an "Install Failed" message. This is what is said:
    Install Failed
    Mac OS X could not be installed on your computer
    The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.
    Click restart to restart your computer and try installing again.
    Now, I've used this disc once before for an upgrade on a laptop and worked fine, just started to fail when used on the G5. The disc is not scratched, nor looks damaged. Not sure why it's saying damaged? Any insightful knowledge would be appreciated.
    Thanks!

    The install disks I have are the ones he got with his Mac Mini. Are there different install disks for iMacs? On the disks themselves, it says "for Mac computers."
    Do I have to buy an OS which is specifically for iMac?
    The discs that came with his computer have only the necessary software pieces needed to run his computer--it lacks the drivers that would be needed run your iMac. (In addition, installing the same copy of the OS on two computers would be a violation of the license, even if it worked.)
    You need to buy a retail version of Leopard or Snow Leopard. Since your iMac has an intel processor, you can buy the cheaper Snow Leopard ($29) from the "Store" tab at the top of this page or anywhere that sells Mac software.

  • Tiger install error on disc 2

    Hello ... I am trying to install tiger on a macbook pro and get an error (bomfileerror 5) on the 2nd disc.
    I do not need the xtra software it's trying to install & I would like to just re-start the install however, after I receive the error on disc #2, it tells me to insert #2 & try again which just keeps failing in the exact same way. I have tried resetting PRAM, NVRAM & SMC with no luck as the screen returns to the installer asking for disc #2. Does anyone know how I might interrupt the installer ?? Everything in the apple menu is grayed out. Any help is MOST appreciated !

    *Hi mikm, Welcome* to Apple's Users Help Users Forums.
    So you are currently in Leopard. Do you have a FWHD for Time Machine? How big is it?
    If it were me, I would get a rather large FWHD and then multi partition it. 1= large one for Time Machine. Note that TM is not a bootable clone. 2= Leopard Clone. 3= Tiger Install—now you have both worlds. 4= Tiger Clone. If you don't know about cloning, post back and help should arrive quickly.
    Try a customized Leopard Install where you don't intstall the stuff on Disc 2.
    When I get around to Leopard, that's what I am going to do.
    Good Luck, JP

  • QT 7.3 install fails

    Installing update of QT 7.3 for Tiger on 10.4.11. Current version is QTPro v7. Tried auto install with Software Update and download from Apple/Support/Downloads. Package downloads and opens OK. Tried several times after trash plist, repair permissions and restart. Install fails at about 80% each time.
    First attempt was part of several Software Update updates: 10.4.11, New iTunes, and others. They all installed successfully.
    QTplayer now identifies as 7.3 but does not function. Safari crashes whenever QT required.
    Is there an uninstall I should do first? How do I uninstall and cause 7.3 to make a complete install.
    Any suggestions or solutions welcome.
    -B

    Fixed it myself - Downloaded a fresh copy of OS10.4.11 combo updater and installed that. Then installed a fresh download of the QT7.3 - QT appears to be functioning properly. So the issue may have been an "order of fire" thang, with the Softeware Udater trying to install the QT first, or some hiccup in the multiple update process. I will post back if there is any ongoing problem.
    Note: Restart after OS update was kind of wierd - It did one of those automatic re-restarts in the middle of the one I initiated. Then the hard drive was writing for about 3 minutes after desktop/finder was in view and operative. Same long write sequence after restart from the QT7.3 install.
    -B

  • XPostFacto Tiger Install issues on iMac 350MHz

    Sorry if your not allowed to post this here. :P
    I tried installing Tiger on my iMac with xPostFacto 4. The first 2 attemps failed, and on the 3rd, it rebooted, only to be followed by a kernel problem. I tried again today. I got the Apple logo, followed by this:
    [IMG]http://i40.tinypic.com/200r98h.jpg[/IMG]
    Help? Thanks.

    Tiger may be looking for more RAM. I've heard reports of the install failing with less than 256MB RAM installed.

  • Archive/Erase and Install fail

    I hate to add my own sob story here, but I'm at a loss here.
    I'd had lingering minor problems with my Tiger installation, so I figured that when I got Leopard, I'd wipe my hard drive and start fresh. So I pop in the disc and 24 hours later, I've had no success. At first, I thought my problems might be the result of a bad DVD, so I returned it to the CambridgeSide store today and obtained a replacement, which fails exactly as before.
    I've tried using both "Archive and Install" and "Erase and Install", with several extras or just the base system; it always terminates with a message about how the Installer could not validate the contents of the "Essentials" package. At one point, after a botched Erase and Install I tried an Archive and Install for kicks, and it seemed to get farther along before terminating in another Install Failed, this time telling me that it could not install files to my hard drive.
    I've run Verify Disk in Disk Utility on my hard drive twice, and it hasn't found anything wrong. Anyone have any idea what's going on?

    Larry V. wrote:
    I The Genius I worked with told me it was likely a bug (albeit a major one) in the install program.
    Well there's one Genius whom I can respect.
    I think this is the conclusion many of us are reaching. I wonder if it might be related to the DVD being double-layered? It might simply demand a tad too much from an older or slightly out-of-kilter optical drive.
    I know for a fact that the ultra-thin optical drives in the MBPs have been a headache for Apple.
    Eventually this will all be sorted out. My disks shipped today. I am already an expert in what not to do, but only the doing on my own machines will tell how well I have learned my lessons. I have two MBPs and one G5 to Leopardize. I will have a house full of backups for each before I even start

  • Install Failed - all other apps installed fine

    I am rebuilding my G5. I tried installing iLife 08 and most everything went fine, however iPhoto will not install. The message is "Install Failed The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement."
    OK, so I called Apple and they wouldn't send me a new disc and wanted to charge me the $40 odd dollars to talk with them.
    The disk looks pristine - it's a family pack, and I've only installed on 3 computers, so I know it has worked. Anyone have any ideas what I should do? I've got a huge amount of photos stuck in iphoto backup that I need access to.
    Thanks.

    Airren:
    Try using Pacifist to find, extract and install just iPhoto from the iLife 08 disk. It might succeed where the Apple installer failed.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Macbook Snow Leopard Install Fails

    I have been trying to install Snow Leopard on my cousin's macbook for like 2 weeks. I boot up to the install DVD and run the installation. It goes through the entire process all the way to the end and then I get a message that the installation failed with a restart button under it. I have tried doing disk repair and permission repair with disk utility and then running the installation but it still fails. I am at my wits end, I don't know what else to do. I wanted to do this because my cousin's computer was having issues booting. I couldn't even boot the Leopard 10.5 CD that came with her computer. But when I did the snow leopard dvd it boots up perfectly, it just won't install. She needs a computer and I need to not have to share mine with her because hers is broken. I am the only one in the house with enough know how to fix the computers when the break, so that's why I am fixing her computer. I am about ready to throw her Macbook out the window because I am so frustrated. It is 2 years old and shipped with Mac OSX 10.5 Leopard installed on it. It is newer than mine, which I have had for 3 years. Mine is working perfectly still and it is one of the ones that shipped with Tiger installed. Then I upgraded to Leopard, and then to Snow Leopard. I haven't had a single problem with it. I don't understand why her 2 year old computer is having issues when my 3 year old one is not. Especially when they are both Macbook 13" White laptops and look identical when you don't get a close look at the keys. That is the only difference, her function keys are a bit different than mine, and have the buttons for controlling dvd's on them, like play, pause, and rewind. Mine are just like volume, brightness and stuff like that and just normal function keys. Mine is older, if any of them was going to break it should have been mine, but hers is the one with all the issues. I don't get it! This is her second laptop, her first was a Compaq PC laptop and it got a ton of viruses on it and crashed. I suggested that her parents get her a Macbook because they work better and get far fewer viruses (if any at all) than PC's do and for a wonder, they did. She is always the one with the computer problems. I guess it's because she's a teenager and doesn't always take very good care of her stuff. I just don't know. I do know that I have a huge problem with her laptop and need help!!

    It doesn't. It just starts up to the Macintosh Hard drive and doesn't do anything differently because I am holding the D key during start up.
    For the D key to work one of two criteria must be met:
    1. The HD has a hidden partition on it with the Apple Hardware Test (AHT) on it. Some recent Mac models come from Apple with this HD configuration, most older ones do not. Any drive that has been reformatted will not have the hidden partition.
    2. An original grey system disc with the specific version of AHT for that Mac model must be in the optical drive. The disc itself will be marked to indicate that it has the AHT on it.
    Retail OS installer discs (Leopard, Snow Leopard, whatever) do not have any version of the AHT on them. The AHT is not an application, it is a tiny operating system. Each version is designed only for specific models; they are not interchangeable.

  • Snow Leopard Install Failed on iMac

    I have a late 2006 iMac and cannot get SL to install. Every time I try something different I still get the "Could not install the necessary support files" error. Here is what I have tried:
    - Clean install of SL on erased drive (including a 7-pass erase), fail.
    - Installed Leopard, then upgrade, fail.
    - installed Tiger even, then upgrade, fail.
    - Thought I had bad DVD, returned it to Apple store, new disk but same problems.
    - tried my friend's disk that worked on his MB, failed.
    -Per AppleCare rep I reset my SMC and PRAM, tried clean install, failed.
    - Hard Drive verification cheks out fone.
    - Permissions, fine.
    - Apple Care reps now tell me that they are out of ideas and that I should bring it to the store, but I have found that the store "geniuses" are usually NOT that.
    The only thing I have not tried is booting from an external drive. Have other iMac users with these problems with SL had success this way? I mean I don't like the fact that anytime I want to reinstall my operating software that I will have to go through this circus.
    Any other ideas to try? What has worked for others?
    Help!

    A 2006 24" iMac should be the same as mine and I installed SL on 2 of them with no problems at all. It's really very weird that you should be having this problem even after reformatting the drive.
    Only thing I can think of that might be causing this is hardware problems, most likely the DVD drive is going bad. Or perhaps the motherboard, but I think you would have had many more problems than this if it was the motherboard. You might even have a hard drive going bad, which seems unlikely after doing a 7 pass erase. That will usually isolate any bad blocks.
    As someone said you can do a remote install from another Mac if you have one or can get the use of one. You could also try hooking up an external DVD drive and see if that works. Make sure it's firewire, that works much better, but USB 2 should still work if you have no choice. If a remote or external DVD works then it is most likely the the internal DVD.
    Kevin

  • Component SMS_Contol_manager and SMS_Notification_server install failed on SCCM2012

    we have try to uninstall client and remove the ccm namespace from wmi, and reisntall MP, no luck
    below log from mpmsi.log.lasterror
    === Verbose logging started: 8/27/2014  20:50:23  Build type: SHIP UNICODE 5.00.9600.00  Calling process: H:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
    MSI (c) (9C:58) [20:50:23:592]: Resetting cached policy values
    MSI (c) (9C:58) [20:50:23:592]: Machine policy value 'Debug' is 0
    MSI (c) (9C:58) [20:50:23:592]: ******* RunEngine:
               ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (9C:58) [20:50:23:592]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (9C:58) [20:50:23:592]: Grabbed execution mutex.
    MSI (c) (9C:58) [20:50:23:594]: Cloaking enabled.
    MSI (c) (9C:58) [20:50:23:594]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (9C:58) [20:50:23:594]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (24:FC) [20:50:23:598]: Running installation inside multi-package transaction h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    MSI (s) (24:FC) [20:50:23:598]: Grabbed execution mutex.
    MSI (s) (24:48) [20:50:23:599]: Resetting cached policy values
    MSI (s) (24:48) [20:50:23:599]: Machine policy value 'Debug' is 0
    MSI (s) (24:48) [20:50:23:599]: ******* RunEngine:
               ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (24:48) [20:50:23:599]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (24:48) [20:50:23:603]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (24:48) [20:50:23:605]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (24:48) [20:50:23:606]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (24:48) [20:50:23:607]: File will have security applied from OpCode.
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi' against software restriction policy
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi has a digital signature
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi is permitted to run because the user token authorizes execution (system or service token).
    MSI (s) (24:48) [20:50:23:619]: MSCOREE not loaded loading copy from system32
    MSI (s) (24:48) [20:50:23:621]: End dialog not enabled
    MSI (s) (24:48) [20:50:23:621]: Original package ==> h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    MSI (s) (24:48) [20:50:23:621]: Package we're running from ==> C:\Windows\Installer\6257f6f.msi
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (24:48) [20:50:23:626]: Machine policy value 'TransformsSecure' is 1
    MSI (s) (24:48) [20:50:23:627]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisablePatch' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
    MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (24:48) [20:50:23:627]: Transforms are not secure.
    MSI (s) (24:48) [20:50:23:628]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log'.
    MSI (s) (24:48) [20:50:23:628]: Command Line: CCMINSTALLDIR=h:\Program Files\SMS_CCM CCMSERVERDATAROOT=h:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
    CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=H:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=6556
    MSI (s) (24:48) [20:50:23:628]: Product Code passed to Engine.Initialize:           ''
    MSI (s) (24:48) [20:50:23:628]: Product Code from property table before transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
    MSI (s) (24:48) [20:50:23:628]: Product Code from property table after transforms:  '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
    MSI (s) (24:48) [20:50:23:628]: Product not registered: beginning first-time install
    MSI (s) (24:48) [20:50:23:630]: Machine policy value 'DisableMsi' is 1
    MSI (s) (24:48) [20:50:23:630]: Product {6CED3AB0-05AF-4C81-8DBE-A62661C26F40} is not managed.
    MSI (s) (24:48) [20:50:23:630]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (s) (24:48) [20:50:23:630]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (24:48) [20:50:23:630]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (24:48) [20:50:23:630]: Adding new sources is allowed.
    MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:630]: Package name extracted from package path: 'mp.msi'
    MSI (s) (24:48) [20:50:23:630]: Package to be registered: 'mp.msi'
    MSI (s) (24:48) [20:50:23:631]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (24:48) [20:50:23:631]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (24:48) [20:50:23:631]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (24:48) [20:50:23:631]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (s) (24:48) [20:50:23:631]: Running product '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}' with elevated privileges: Product is assigned.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'h:\Program Files\SMS_CCM'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'h:\Program Files\Microsoft Configuration Manager'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'H:\Program Files\Microsoft Configuration Manager\bin\x64'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '6556'.
    MSI (s) (24:48) [20:50:23:631]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is 'd8d0cefc1249514889002637bb750a41'.
    MSI (s) (24:48) [20:50:23:632]: RESTART MANAGER: Session opened.
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:632]: TRANSFORMS property is now:
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
    MSI (s) (24:48) [20:50:23:633]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
    MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
    MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
    MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
    MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
    MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
    MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
    MSI (s) (24:48) [20:50:23:639]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (24:48) [20:50:23:642]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
    MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (s) (24:48) [20:50:23:645]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (s) (24:48) [20:50:23:648]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\6257f6f.msi'.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi'.
    MSI (s) (24:48) [20:50:23:648]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
    MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (24:48) [20:50:23:648]: Machine policy value 'DisableRollback' is 0
    MSI (s) (24:48) [20:50:23:648]: User policy value 'DisableRollback' is 0
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    === Logging started: 8/27/2014  20:50:23 ===
    MSI (s) (24:48) [20:50:23:649]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (24:48) [20:50:23:649]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (s) (24:48) [20:50:23:649]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (s) (24:48) [20:50:23:649]: Doing action: INSTALL
    Action start 20:50:23: INSTALL.
    MSI (s) (24:48) [20:50:23:650]: Running ExecuteSequence
    MSI (s) (24:48) [20:50:23:650]: Doing action: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933
    MSI (s) (24:48) [20:50:23:650]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
    MSI (s) (24:48) [20:50:23:650]: PROPERTY CHANGE: Adding System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
    MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933
    Action ended 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
    MSI (s) (24:48) [20:50:23:651]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
    MSI (s) (24:48) [20:50:23:651]: PROPERTY CHANGE: Adding SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
    MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3
    Action ended 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
    MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3'
    MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.
    MSI (s) (24:48) [20:50:23:652]: Doing action: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3
    Action ended 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
    MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3'
    MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3.
    MSI (s) (24:48) [20:50:23:653]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
    Action ended 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
    MSI (s) (24:48) [20:50:23:653]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
    MSI (s) (24:48) [20:50:23:653]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
    MSI (s) (24:48) [20:50:23:653]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
    Action ended 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
    MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
    MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
    MSI (s) (24:48) [20:50:23:654]: Doing action: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
    Action ended 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
    MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
    MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
    MSI (s) (24:48) [20:50:23:655]: Doing action: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
    Action ended 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
    MSI (s) (24:48) [20:50:23:655]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
    MSI (s) (24:48) [20:50:23:655]: PROPERTY CHANGE: Adding System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
    MSI (s) (24:48) [20:50:23:655]: Doing action: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2
    Action ended 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
    MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
    MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
    MSI (s) (24:48) [20:50:23:656]: Doing action: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2
    Action ended 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
    MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
    MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
    MSI (s) (24:48) [20:50:23:657]: Doing action: LaunchConditions
    Action ended 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
    Action start 20:50:23: LaunchConditions.
    MSI (s) (24:48) [20:50:23:657]: Skipping action: CcmSwitchToRepairMode (condition is false)
    MSI (s) (24:48) [20:50:23:657]: Doing action: AppSearch
    Action ended 20:50:23: LaunchConditions. Return value 1.
    Action start 20:50:23: AppSearch.
    MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: PROPERTY CHANGE: Modifying CCMINSTALLDIR property. Its current value is 'h:\Program Files\SMS_CCM'. Its new value: 'C:\Windows\CCM\'.
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\CCM\Embedded 3: 2
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Microsoft\CCM\Logging\DebugLogging 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\IIS 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:661]: Skipping action: CcmAbortIfEmbeddedExists (condition is false)
    MSI (s) (24:48) [20:50:23:661]: Doing action: CCPSearch
    Action ended 20:50:23: AppSearch. Return value 1.
    MSI (s) (24:48) [20:50:23:661]: Note: 1: 2205 2:  3: CCPSearch
    MSI (s) (24:48) [20:50:23:661]: Note: 1: 2228 2:  3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
    Action start 20:50:23: CCPSearch.
    MSI (s) (24:48) [20:50:23:661]: Doing action: RMCCPSearch
    Action ended 20:50:23: CCPSearch. Return value 0.
    MSI (s) (24:48) [20:50:23:662]: Note: 1: 2205 2:  3: CCPSearch
    MSI (s) (24:48) [20:50:23:662]: Note: 1: 2228 2:  3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
    Action start 20:50:23: RMCCPSearch.
    MSI (s) (24:48) [20:50:23:662]: Doing action: ValidateProductID
    Action ended 20:50:23: RMCCPSearch. Return value 0.
    Action start 20:50:23: ValidateProductID.
    MSI (s) (24:48) [20:50:23:662]: Skipping action: CcmSetInstallDir32 (condition is false)
    MSI (s) (24:48) [20:50:23:662]: Doing action: CcmSetInstallDir64
    Action ended 20:50:23: ValidateProductID. Return value 1.
    MSI (s) (24:48) [20:50:23:663]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDir64'
    MSI (s) (24:48) [20:50:23:663]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\Windows\CCM'.
    Action start 20:50:23: CcmSetInstallDir64.
    MSI (s) (24:48) [20:50:23:663]: Doing action: CcmSetInstallDirFromCmdLine
    Action ended 20:50:23: CcmSetInstallDir64. Return value 1.
    MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDirFromCmdLine'
    MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Modifying TARGETDIR property. Its current value is 'C:\Windows\CCM'. Its new value: 'C:\Windows\CCM\'.
    Action start 20:50:23: CcmSetInstallDirFromCmdLine.
    MSI (s) (24:48) [20:50:23:664]: Doing action: CcmSetPrimaryFolder
    Action ended 20:50:23: CcmSetInstallDirFromCmdLine. Return value 1.
    MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetPrimaryFolder'
    MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Adding PRIMARYFOLDER property. Its value is 'TARGETDIR'.
    Action start 20:50:23: CcmSetPrimaryFolder.
    MSI (s) (24:48) [20:50:23:665]: Doing action: FindRelatedProducts
    Action ended 20:50:23: CcmSetPrimaryFolder. Return value 1.
    Action start 20:50:23: FindRelatedProducts.
    MSI (s) (24:48) [20:50:23:665]: PROPERTY CHANGE: Adding SMSSP1COLOCDOWNGRADE property. Its value is '{8864FB91-94EE-4F16-A144-0D82A232049D}'.
    MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectUnsupportedUpgrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectDowngrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Skipping action: CcmDetectUnsupportedUpgrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Doing action: SmsDetectColocationDowngrade
    Action ended 20:50:23: FindRelatedProducts. Return value 1.
    MSI (s) (24:48) [20:50:23:666]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SmsDetectColocationDowngrade'
    Action start 20:50:23: SmsDetectColocationDowngrade.
    MSI (s) (24:48) [20:50:23:666]: Product: ConfigMgr Management Point -- A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
    Action ended 20:50:23: INSTALL. Return value 3.
    Property(S): UpgradeCode = {ABD0F60F-1622-4311-8989-106B60D784FF}
    Property(S): TARGETDIR = C:\Windows\CCM\
    Property(S): ALLUSERS = 1
    Property(S): ErrorDialog = ErrorDialog
    Property(S): ProductName = ConfigMgr Management Point
    Property(S): ProductCode = {6CED3AB0-05AF-4C81-8DBE-A62661C26F40}
    Property(S): PackageCode = {5CBAF9F8-A298-49C0-B874-D0F5F0F39DB4}
    Property(S): Manufacturer = Microsoft Corporation
    Property(S): ProductVersion = 5.00.7804.1000
    Property(S): ProductLanguage = 1033
    Property(S): SMSCWSREGKEYNAME = MPCWSPath
    Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
    Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
    Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
    Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
    Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
    Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
    Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
    Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
    Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
    Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
    Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
    Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
    Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
    Property(S): CcmWmiRollback_ActionText = Deletes the existin site policy config and then recompiles MOF to restore old WMI instances.
    Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
    Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
    Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
    Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
    Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
    Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
    Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
    Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
    Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
    Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
    Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
    Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
    Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
    Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
    Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
    Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
    Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
    Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
    Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
    Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
    Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
    Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
    Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
    Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
    Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
    Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
    Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
    Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
    Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
    Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
    Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
    Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
    Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
    Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
    Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
    Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
    Property(S): PRIMARYFOLDER = TARGETDIR
    Property(S): VersionNT64 = 603
    Property(S): CCMINSTALLDIR = C:\Windows\CCM\
    Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
    Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
    Property(S): CCMEXECFILEKEY = [#CcmExec_exe.A6940213_CD40_4753_8BA2_E803376DECC3]
    Property(S): CcmDetectUpgradeOldClient_Message = A previous version of the Configuration Manager Client is installed. Please upgrade the client to Configuration Manager 2012 before attempting to upgrade.
    Property(S): SmsDetectUpgradeOldMP_Message = A previous version of the Configuration Manager Management Point is installed. Please upgrade the management point to Configuration Manager 2012 before attempting to upgrade.
    Property(S): SmsDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Management Point is installed before upgrading Configuration Manager Client.
    Property(S): CcmDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Client is installed before upgrading Configuration Manager Management Point.
    Property(S): CcmAbortIfEmbeddedExists_ActionText = Abort installation if the Configuration Manager Client Embedded version is installed.
    Property(S): CcmRegisterHostingConfigurationInit_ActionText = Gathers configuration for Configuration Manager Client service to be registered on the system.
    Property(S): CcmRegisterHostingConfiguration_ActionText = Register configuration for Configuration Manager Client service.
    Property(S): CcmRegisterHostedApplicationsInit_ActionText = Gathers hosted out-of-proc DCOM applications running inside of Configuration Manager Client to be registered on the system.
    Property(S): CcmRegisterHostedApplications_ActionText = Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRegisterHostedApplicationsRollback_ActionText = Rollback the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRemoveHostedApplicationsInit_ActionText = Prepare to remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRemoveHostedApplications_ActionText = Remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRegisterEndpointsInit_ActionText = Gathers information such as log file name on each endpoint to be registered on the system.
    Property(S): CcmRegisterEndpoint_ActionText = Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI.
    Property(S): CcmRegisterEndpointRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint.
    Property(S): CcmRemoveEndpointsInit_ActionText = Gathers information for each endpoint to be removed from the system.
    Property(S): CcmRemoveEndpoint_ActionText = Removes endpoint gathered in the action CcmRemoveEndpointsInit with WMI.
    Property(S): CcmRegisterSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRegisterSystemTask.
    Property(S): CcmRegisterSystemTask_ActionText = Registers a System Task with WMI.
    Property(S): CcmRegisterSystemTaskRollback_ActionText = Rolls back the changes made by CcmRegisterSystemTask.
    Property(S): CcmRemoveSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRemoveSystemTask.
    Property(S): CcmRemoveSystemTask_ActionText = Deletes a System Task from WMI.
    Property(S): CcmRegisterProduct_ActionText = If product is registered in MSI database, then product is registered with WMI.
    Property(S): CcmRegisterProductRollback_ActionText = Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.
    Property(S): CcmUnregisterProduct_ActionText = Deletes the instance from WMI in ccm namespace using the ProductCode instance in the session.
    Property(S): CcmRegisterComponentsInit_ActionText = Generates the list of components for CcmRegisterComponets action to register.
    Property(S): CcmRegisterComponents_ActionText = Registers components passed in from CcmRegisterComponentsInit
    Property(S): CcmRegisterComponentsRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    Property(S): CcmUnregisterComponentsInit_ActionText = Generates the list of components for CcmUnregisterComponets action to unregister.
    Property(S): CcmUnregisterComponents_ActionText = Unregisters components passed in from the action CcmUnregisterComponentsInit.
    Property(S): CcmSetupLoggingInit_ActionText = Gathers log file information from the LogFile table and passes this information to CcmSetupLogging.
    Property(S): CcmSetupLogging_ActionText = Sets component logging information in WMI.
    Property(S): CcmStopService_ActionText = Stops the ccmexec service.
    Property(S): CcmStopServiceRollback_ActionText = Calls CcmStartService. Starts the ccmexec service.
    Property(S): CcmStartService_ActionText = Starts the ccmexec service.
    Property(S): CcmClearServiceSetupStamp_ActionText = Clear the time stamp for blocking the ccmexec service from starting up during upgrade.
    Property(S): CcmSetServiceConfigInit_ActionText = Gathers ServiceData and then queues actions CcmSetServiceConfig and CcmMigrateMessagingQueues.
    Property(S): CcmSetServiceConfig_ActionText = Sets WMI ServiceRootDir and configures CCMEXEC service.
    Property(S): CcmConfigDCOMInit_ActionText = Processes the CcmDCOMAplication table and  checks to see if the DCOM Component is being updated. If so, passes that information to custom action CcmConfigDCOM.
    Property(S): CcmConfigDCOM_ActionText = Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.
    Property(S): CcmFixupServiceConfigInit_ActionText = Gathers the services or load ordering groups which must be started before ccmexec starts.
    Property(S): CcmFixupServiceConfig_ActionText = Sets the services or load ordering groups which must be started before ccmexec can be started.
    Property(S): CcmRemoveService_ActionText = Removes BITS jobs and deletes the messaging queues.
    Property(S): CcmRemoveLanternDocuments_ActionText = Removing documents from Microsoft Policy Platform that have been submitted by Configuration Manager authority.
    Property(S): CcmSetPortConfigInit_ActionText = This custom action specifies the port the client should use when communicating with the management point and the server locator point.
    Property(S): CcmSetHttpsConfigInit_ActionText = This custom action configures the https port and http state.
    Property(S): CcmPreserveLastStateSerialNum_ActionText = Custom action to preserve last state message serial number.
    Property(S): CcmInitializePolicyInit_ActionText = Gather default policy information.
    Property(S): CcmInitializePolicy_ActionText = Sets and initializes default policy.
    Property(S): CcmMigratePolicySettingsInit_ActionText = Custom action to schedule the deferred execution of CcmMigratePolicySettings custom action.
    Property(S): CcmMigratePolicySettings_ActionText = Compiles Mof file to migrate root\ccm\Policy namespace schema from Pre-V4 Beta2 to V4 and above.
    Property(S): CcmMigratePolicySettingsCommit_ActionText = Just deletes the temporary MOF file.
    Property(S): CcmMigratePolicySettingsRollback_ActionText = Just deletes the temporary MOF file. Actual Rollback is done by the rollback action that rollbacks root\ccm namespace.
    Property(S): ExpandCcmExecFileKey_ActionText = Property action for setting CcmExec file key.
    Property(S): CcmMinAppVersion = 5.00.7000.0000
    Property(S): CcmMaxAppVersion = 5.00.9000.0000
    Property(S): SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\SysWOW64\
    Property(S): System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\system32\
    Property(S): SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\SysWOW64\
    Property(S): System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\system32\
    Property(S): USELEGACYSTATEMESSAGESTORE = 1
    Property(S): CcmValidateCustomWebSite_ActionText = This custom action validates that either the custom website or default website (if a custom website is not specified) can be used.
    Property(S): CcmValidateServerConfig_ActionText = Validates that IIS, BITS and WebDAV is installed and properly configured setup.
    Property(S): CcmLookupIISAnonymousAccountName_ActionText = Looks up the IIS AnonymousUserName and then sets the IISAnonymousUserAccount property to this value.
    Property(S): CcmSetServiceMPConfigInit_ActionText = Gathers Incoming and Outgoing directories and virtual directories for the MP. Queues the action CcmSetServiceMPConfig.
    Property(S): CcmSetServiceMPConfig_ActionText = Sets Incoming and Outgoing directories and virtual directories in WMI.
    Property(S): CcmSetServerDataRoot_ActionText = Property action for setting service data root folder.
    Property(S): CcmSetServerDataRootInstallDir_ActionText = Property action for setting service data folder.
    Property(S): CcmIncomingVDirName = CCM_Incoming
    Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\SysWOW64\
    Property(S): System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\system32\
    Property(S): CCMSERVERDATAROOT = h:\Program Files\Microsoft Configuration Manager
    Property(S): CcmSystemVDirName = CCM_System
    Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
    Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
    Property(S): SMSCACHEDIR = Default
    Property(S): SMSCACHEFLAGS = Default
    Property(S): DISABLESITEOPT = Default
    Property(S): DISABLECACHEOPT = Default
    Property(S): SMSCACHESIZE = 5120
    Property(S): SmsShellNotify_ActionText = Notifies the shell for the file-association icon changes.
    Property(S): CCMINSTALLMSMQ = FALSE
    Property(S): CCMINSTALLMP = 1
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): ARPNOREMOVE = 1
    Property(S): ARPNOMODIFY = 1
    Property(S): CCMENABLELOGGING_Default = FALSE
    Property(S): CCMLOGLEVEL_Default = 1
    Property(S): CCMLOGMAXSIZE_Default = 2000000
    Property(S): CCMLOGMAXHISTORY_Default = 1
    Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4;CCMFWKUPGRADEFROMPREV4;CLIENTFWKUPGRADEFROMCM2007;SMSCWS;CCMSHAREMODE
    Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
    Property(S): CcmDefaultPolicyAuthorityPriority = 10
    Property(S): SmsDetectColocationDowngrade_Message = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Property(S): SmsDetectColocationDowngrade_ActionText = Detect if a newer version of the Configuration Management Client is installed before installing the Configuration Manager Management Point.
    Property(S): SmsDetectDowngrade_ActionText = Check if a newer version of the Configuration Manager Client is already installed.
    Property(S): SmsMpRepairSucceeded_ActionText = Sends a wmi event to indicate MP repair succeeded.
    Property(S): SmsDetectMSXMLRebootRequired_ActionText = Tries to create an instance of SAXXMLReader to determine if a reboot is required.
    Property(S): SmsMpSetDefaultPolicyAuthority_ActionText = Set default policy authority for the Configuration Manager Management Point.
    Property(S): SmsMpSerializedKeyExist_ActionText = Wait for the Configuration Manager Management Point serialized key to exist.
    Property(S): ButtonText_Next = &Next >
    Property(S): ButtonText_Back = < &Back
    Property(S): ButtonText_Cancel = &Cancel
    Property(S): ButtonText_Finish = &Finish
    Property(S): ButtonText_Install = &Install
    Property(S): ButtonText_Close = &Close
    Property(S): ButtonText_OK = &OK
    Property(S): ButtonText_Abort = &Abort
    Property(S): ButtonText_Ignore = &Ignore
    Property(S): ButtonText_No = &No
    Property(S): ButtonText_Yes = &Yes
    Property(S): ButtonText_Retry = &Retry
    Property(S): ButtonText_Exit = &Exit
    Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
    To prevent having to reboot the machine, please close the following applications:
    Property(S): DefaultUIFont = DefaultDlgFont
    Property(S): DialogBox_Title = ConfigMgr Management Point Setup
    Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
    Property(S): InstallDialog_Title = Install
    Property(S): InstallDialog_SubTitle = The product is now ready to install
    Property(S): InstallDialog_Info = Click Next to proceed.
    Property(S): ProgressDialog_Title = Please Wait
    Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
    Property(S): CompleteDialog_Title = Setup Complete
    Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
    Property(S): CompleteDialog_Info = Setup was successful.
    Property(S): UserExitDialog_Title = Setup Aborted
    Property(S): UserExitDialog_SubTitle = Setup was cancelled
    Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
    Property(S): InstallErrorDialog_Title = Setup Aborted
    Property(S): InstallErrorDialog_SubTitle = Setup failed
    Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
    Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
    Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
    Property(S): SMSSP1COLOCDOWNGRADE = {8864FB91-94EE-4F16-A144-0D82A232049D}
    Property(S): MsiLogFileLocation = h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): USESMSPORTS = TRUE
    Property(S): SMSPORTS = 80
    Property(S): USESMSSSLPORTS = TRUE
    Property(S): SMSSSLPORTS = 443
    Property(S): USESMSSSL = TRUE
    Property(S): SMSSSLSTATE = 0
    Property(S): CCMENABLELOGGING = TRUE
    Property(S): CCMLOGLEVEL = 1
    Property(S): CCMLOGMAXSIZE = 1000000
    Property(S): CCMLOGMAXHISTORY = 1
    Property(S): CURRENTDIRECTORY = H:\Program Files\Microsoft Configuration Manager\bin\x64
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 6556
    Property(S): MsiRestartManagerSessionKey = d8d0cefc1249514889002637bb750a41
    Property(S): VersionDatabase = 200
    Property(S): MsiSystemRebootPending = 1
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT = 603
    Property(S): WindowsBuild = 9600
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): MsiNTSuiteDataCenter = 1
    Property(S): WindowsFolder = C:\Windows\
    Property(S): WindowsVolume = C:\
    Property(S): System64Folder = C:\Windows\system32\
    Property(S): SystemFolder = C:\Windows\SysWOW64\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Windows\TEMP\
    Property(S): ProgramFilesFolder = C:\Program Files (x86)\
    Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
    Property(S): ProgramFiles64Folder = C:\Program Files\
    Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
    Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
    Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
    Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
    Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): MsiAMD64 = 6
    Property(S): Msix64 = 6
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 5372
    Property(S): VirtualMemory = 4017
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = SYSTEM
    Property(S): UserSID = S-1-5-18
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = [servername]
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 23
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 20:50:23
    Property(S): Date = 8/27/2014
    Property(S): MsiNetAssemblySupport = 4.0.30319.33440
    Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): Privileged = 1
    Property(S): DATABASE = C:\Windows\Installer\6257f6f.msi
    Property(S): OriginalDatabase = h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    === Logging stopped: 8/27/2014  20:50:23 ===
    MSI (s) (24:48) [20:50:23:717]: Note: 1: 1708
    MSI (s) (24:48) [20:50:23:717]: Product: ConfigMgr Management Point -- Installation operation failed.
    MSI (s) (24:48) [20:50:23:718]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    MSI (s) (24:48) [20:50:23:721]: Deferring clean up of packages/files, if any exist
    MSI (s) (24:48) [20:50:23:721]: MainEngineThread is returning 1603
    MSI (s) (24:FC) [20:50:23:725]: RESTART MANAGER: Session closed.
    MSI (s) (24:FC) [20:50:23:725]: No System Restore sequence number for this installation.
    MSI (s) (24:FC) [20:50:23:726]: User policy value 'DisableRollback' is 0
    MSI (s) (24:FC) [20:50:23:726]: Machine policy value 'DisableRollback' is 0
    MSI (s) (24:FC) [20:50:23:726]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (24:FC) [20:50:23:727]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (9C:58) [20:50:23:728]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (9C:58) [20:50:23:728]: MainEngineThread is returning 1603
    === Verbose logging stopped: 8/27/2014  20:50:23 ===

    A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
    Action ended 20:50:23: INSTALL. Return value 3.
    The installer certainly thinks that you still have a previous ConfigMgr client installed. Perhaps you haven't completely removed it. Use ccmclean.exe from the SMS 2003 tool kit.
    If that fails, why not just rebuild the server - you've said that this is a fresh install. I don't like too much messing at the beginning. This can be difficult enough - you need to start with a clean installation of the product.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

Maybe you are looking for

  • How to mount a sharepoint server from the finder

    Can anyone help me with how to mount a microsoft sharepoint services server from the finder. I need to do this because I want to use the collaboration features in Acrobat 8. In order to create a shared review I need to be able to open the document fr

  • Creating websites in photoshop and export to dreamweaver

    Ok. I NEED HELP!!! I tend to create complex designs in photoshop, and I can never get my images to line up correctly in Dreamweaver. I had sliced each image in photoshop, and saved them as HTML and Images, I open it up in dreamweaver, and none of my

  • Iphoto 9 Faces and Place metadata tags

    Does the metadata from name on the picture from get stored in the file once the recognition is conformed. Does any have an idea what kind of metadata is store and under what category and standard.

  • Converting Ur iPod into A Drive?

    I have a 2GB iPod nano and I have iTunes on a desktop and not on a laptop and I want to transfer Word files or a downloaded program to the laptop and would make a transfer from desktop to my laptop. This would make a iPod favourable solution but is i

  • Call a VI whith the Run-Time Engine in TestStand

    Hi, I'm using TestStand 4.2.1. On the same PC I've installed LabVIEW Run-Time Engine 2009 (9), 2010, ... On another PC I developped a series of VI with LabVIEW 2010. My client want VI in the 2009 version, that's why I use a Run-Time Engine. I placed