Tiger Installation Discs

I'm not sure if this is considered the proper place to put this thread, but it seemed like the most logical location.
I have a MacBook Pro that I bought nearly a month ago now, and it's been working beautifully. I recently got a program, and in the installation guide, it said to intall X11 to be able to put the software on my computer, saying that it was on the installation discs for OSX Tiger. The issue is, when I took out the OSX installation discs, it turns out that I have tow copies of Disc 2, as opposed to a copy of the first disc and one of the second. Is there any way It'd be possible to be sent a copy of the first installer disc? Thanks in advance for any help.

Alright, that helps, but I searched for a phone number and it didn't turn up any results, and looking through the booklets that came with my laptop didn't grant any enlightenment either. Is there something I'm missing?

Similar Messages

Tiger installation disc won't eject and won't open.

My hard disk crashed on my Powerbook G4. I have the aluminum 17 inch with 1.0 mhz. I had OS X 10,4.7 installed on it. I bought a new hard drive from iFixit.com with more memory. The installation seemed to go OK. I put my Tiger installation disc in and nothing happens. I can turn on the computer but other than the light in the door opener nothing happens. I can't eject the Tiger disc now. I have tried the eject button, starting it up with the mouse key pressed down, starting up with the option key depressed and nothing works. I tried getting into it manually with tweezers and I couldn't grab it. Do I need to install from the original Software install and restore disc? If so, how can I get the Tiger disc out so I can get the original installation disc in. Any help would be greatly appreciated.

Also might try holding down the Option Key during bootup.
Is that a Wired Mouse? Many times a Wireless one wont be seen during boot.

Can I start up my new imac (Snow Leopard) from a Tiger installation disc?

Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc, I've tried starting up with my old Tiger installation disc, but to no avail... At the risk of sounding a little stupid, should Apple have given me a Leopard disc with my purchase?

bgaribay wrote:
Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc,
I've tried starting up with my old Tiger installation disc, but to no avail...
you can not use the tiger disk. you need to use your snow leopard disk. what happened to yours? every new computer comes with one. it's called install disk one and is packaged with every new computer.

Tiger installation disc for Intel Proc

Greetings, does anyone know where I may be able to pick up an installation disc for Tiger that will work on my new intel based mac book pro? I have a family pack of Tiger licenses but it's for the Power PC chipset (all my other macs are the older chips). My new MBP shipped with Leopard and is sluggish at best. I would like to go to a Tiger build on my MBP, but obviously my PPC Tiger won't install. I was going to call Apple tomorrow to inquire about one, but didn't know if anyone else ever ran into this issue and could give me some advice.
Thanks, Scott

You're probably stuck with Leopard, especially it if shipped with it. See http://docs.info.apple.com/article.html?artnum=25784 and http://docs.info.apple.com/article.html?artnum=25497

How can I get tiger installation discs?

Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should try install op system 4 Powerbook G4-dont have discs- can I get them? or other solution? Am using OS 10.4.11- I think I need Tiger? Thanks for any help

Apple no longer has them.
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

"Error: No valid packages (-9997)" Tiger installation disc

When attempting to install tiger on my imac g4, it gets to about 65% on the essentials bar then errors, something like BomFatal error some files are not written properly. My harddrive repairs fine but the Mac OSX disc, when i run permission verification first aid returns "Error: No valid packages (-9997)". The support page was not paticularly helpful in this respect, and the folks here tend to be more helpful anyway.
Thanks in advance.

Here's a post with replies that cover your issue.
Posting in the Airport for Windows forum will not get the help you need. I found this post by accident.
Perhaps, (if this is what you have) the iMac Flat Panel forum would help you more.
DALE

Hi there! could yuo please be so kind and help with a problem which is; my HD disck in my Mac desktop needs to be repaired. after trying to verufy the disc it is asking me to start the computer with another disc which is Mac OS X installation disc and th

hi there!
the disk in my Mac desktop need repairing.
the Disc Utility is asking me to start the computer by running the Mac OS X TIGER installation disc and then repair the disc.
my question is;
by running the disc MAC OS X TIGER in order to repair it do i run the risk of downgrading the actual operating system of Lion to Tiger (which is 5 years old)?
thanking you in anticipation.
Kolindo.

Kolindo wrote:
the computer was bought 5 years ago so i have only one disc which is Tiger.
the lion was bought on line 4 months ago so i have no disc.
so it meas that i will be downgrading 5 years back if go ahead and do it?
No, don't do that. As Dave said, if you're running Lion, use the Recovery HD (partition, actually) that should be on your internal HD already. See Using the Recovery HD for details.

Won't boot from installation disc

I'd like to reinstall Tiger. The installation disc mounts on the desktop and opens. I click on the install icon to restart the computer and boot from the disc and the computer crashes. I have two Tiger installation discs, crashes using either one. I tried it with a Panther installation disc but same thing--crashes. I've tried booting by holding down the C key--crashes. The drive burns successfully and reads successfully. There was no hint of a problem before this.
thoughts anyone
mark

Hi-
If the proper version of the OS software, have you disconnected any third party peripherals, especially USB devices?
Could also try a Single user boot (command + s on startup) , and run fsck to see if there is something amiss on the harddrive.
One other thought, from Safe Mode boot (hold "Shift" on startup), try the OS X install disc.
Yet, one more thought, a simple PRAM reset may be all that's needed.

Use of Tiger cd installation discs with ema \c power PC no dvd

Purchased tiger for emac. Currently using OS X Jaguar. program came with DVD installation disc. Sent for and rec. Tiger CDs with exchange program. problem. . .unble to install with these CDs. Any suggestions?
Thanks

Hi CJQ,
when did you buy the iBook? What sub-version are the Tiger install CDs?
If you bought the iBook in 2005 it shipped with either 10.4.2 or 10.4.4 (Mac OS: Versions, builds included with computers (since 1998)). If the Tiger install CDs are 10.4.0 it is expected bahaviour that you cannot install from them: Don't install older versions of Mac OS than what comes with your computer.
Be aware that you cannot use hardware specific disks that shipped with another computer.

Tiger Installation Problems: Can't install from disc...continuous restarts

Attempting Tiger install on fairly old iMac (six years) ... the DVD player is caput, so I'm attempting to install with external DVD-ROM (Teac). Upon clicking the install icon, I get a message that asks me to restart to continue the process. Problem is once I restarted, nothing happened and I returned to the beginning. When I tried to restart (as instructed) while pressing the C key...nothing happened. When I tried to restart from the Tiger install disc, it wouldn't allow me to restart. I hit the key and get an error tone. None of the troubleshooting tips seem to apply to this situation. Is it the external drive? Is it my machine? Is it the install DVD 10.4.6? I'm out of ideas ...
Message was edited by: dlzier
Message was edited by: dlzier
Message was edited by: dlzier

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Lost installation disc for OS 10.4 (Tiger). Can I get a replacement?

Should I try to replace this disc (how?)...or is it better to purchase Leopard and upgrade. I have old AppleWorks documents and do not know if they will run on Leopard.

Welcome to Apple Discussions!
I can confirm that Appleworks 6.2.9 works reliably with Leopard, but doesn't come with Leopard. Also the Leopard installer disc does not include any portion of iLife except iTunes and does not include any of the games that shipped with your Mac except Chess, and does not include the hardware test that shipped with your Mac. For those reasons, I'd definitely consider asking AppleCare for the original installer discs. Also none of those applications come with Tiger retail either except Chess.
Message was edited by: a brody

Can emac installer discs be used to install OS 9.2.2 on Pismo G3?

I have a full set of original eMac installer discs, and want to use one set to install OS9.2.2 on an Apple Pismo G3.
Can this be done?
I've heard Apple OEM installer discs are "Mac machine specific", and can't be used to install OS software onto other
Apple Macs of a different model. But, I'm not sure if this is true, as there may be conflicting views on this subject.
The OEM eMac discs I have are as follows:
• Two (2) disc OEM set
   eMac OS X 10.4
   AHT version 2.5
   Disc version 1.1
   2Z691-5518-A
• Five (5) disc set:
   eMac OS X and Mac OS 9
   Mac OS version 9.2.2
   CD version 1.0
   691-3981-A
So the question is .... if OS X Tiger 10.4 has already been installed on the Pismo G3 .... can the above installer discs of (5) OS 9.2.2 be used to install OS 9.2.2 on the Pismo G3?
I would assume the Pismo G3 Hard drive would already have to have the OS9 drivers installed, during the OS 10.4 installation (showing an OS 9 "System Folder" on the HD, to be able to receive the OS 9.2.2 installer discs. I also understand that if installable, that the OS 9.2.2 would only open in the "Classic" mode.
Any information as to if the above eMac OS 9.2.2 installer discs can be used to install OS 9.2.2 on the Pismo G3 ... would be appreciated.
OR .... if other OS9.2.2 installer discs would be more appropiate, and if so, what model of Apple installer discs to use on the Pismo G3.

dalstott::
Below is the OS 9.2.2 "System Folder" that I was able to pull off the Number 1 - OEM eMac "Restore Sofware Disc".
It's obviously different than the first "System Folder" that I have, which I also showed above in a previous reply.
Since the above is off the eMac OS 9.2.2 installer disc, this is the one I think would be more appropiate for copy/dragging to the Pismo G3 Hard Drive.
Even though the Applications in the OS 9 Applications Folder are older, and probably not of much interest ... I also have the following "Applications (Mac OS 9)" folder, also taken off the eMac OS 9 installer disc. If I were to copy/drag this "Applications (Mac OS 9)" folder, to the Pismo G3 Hard Drive ... where do you think it should be placed? In the OS 9.2.2 "System Folder" ... or separately on the main Hard Drive, with all the other main folders?
Note: All these installer folders were "Invisable" disc folders, and only "viewable" using FileBuddy in Mountain Lion 10.8.5.

Start up problems, including from installation disc.

Hello everyone in the Apple ether, I need your help!
I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
Kernel version:
Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
panic: We are hanging here...
After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
User Tips: Kernel Panics
==============
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
* If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
=============
How much HD space is left on the iMac?
How much RAM is installed?
==============
Which "model" & "generation" G5 iMac does your mother have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you

Need help in using mac installation disc

hi guys, my out of warranty macbook's hdd has died on me... so i went out to get a replacement 320GB sata drive, everything was working fine, and macbook detected the hdd, i am able to install my mac osx tiger using the recovery disc, but during the last portion of the installation of disc 2, it say there is a error installing this software it always happen at the same spot, when it's trying to install garageband.
is there something wrong with my macbook, or is it because of the installation disc, i'm at a very very lost state without my macbook T_T

Hello,
Since GarageBand requires 4.3 GB of drive space, check available space on the disk.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Carolyn

How do I install apps off of the OS installation disc?

My mother recently got her MacBook fixed at the Apple Store. Her HD crashed and they put a new one in it with a fresh copy of Tiger.
But for some reason, PhotoBooth is missing from her Applications folder now (it was previously there as she loved taking pictures using the built in iSight... as all mothers do)
I assume I should be able to install it from the OS installations discs that came with her MacBook. Is it a simple process to just install the one application or do I have to do a complete restore?

How to Use Pacifist to Replace Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist from VersionTracker or MacUpdate. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder.
In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.
• Click on the "Go" button .....
• Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
20 files were scanned.
20 of 20 files were present on the hard disk.
0 of 20 files had file permissions that did not match those specified in the package.
0 of 20 files had checksums that did not match those specified in the package.
6. Click “close”. Go to step 7.
Extract or Install........
7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9. In the next dialog, click “Extract”.
10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11. Type in your password, click “OK”
• Pacifist will begin to extract files.
12. In steps 8/10ß.... you also have the choice to “cancel”
Notes.....
• Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop
Leave original alone
Update ..... Default selection
Replace .... Replace option should only be used on full install packages

Tiger Installation Discs

Similar Messages

Maybe you are looking for