Tiger installation doesn't start after restart
I'm trying to install Tiger using the dvd and after i double click the icon, it asks me to restart.. so i click restart and upon restart, nothing happens. All it does is restart my computer. I have all the proper specs necessary and went through the troubleshooting methods to no avail. Any ideas?
Thanks
Three things. Check the DVD and make sure that it's clean as a whistle and doesn't have scratches. Run a lens cleaner on the CD/DVD device. Pop the disk in, launch Disk Utility, and do a checksum on the disk (Images->Checksum).
Similar Messages
-
Installation doesn't start after I enter my password
I click ''Install" then I enter my password as requested. the password dialog box closes and nothing happens. That sort of things happens even with installing new flash player. Help me please!
Welcome to the Apple Support Communities
Try installing in safe mode. First, press the Shift key while your Mac is starting to start into safe mode, and then, open the OS X Mountain Lion installer (on Applications folder) and try to upgrade.
If it doesn't work, I recommend you to burn the Mountain Lion installer onto a DVD or USB drive with Lion Diskmaker > http://liondiskmaker.com Then, after creating it, press the Option (or Alt) key while your Mac is starting, select the OS X Mountain Lion drive and install OS X Mountain Lion -
[SOLVED] Xorg doesn't start after upgrade to 1.17.1
Archlinux i686
Intel Core 2 Duo 6600
01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
After following upgrades:
[2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
[2015-02-26 03:27] [ALPM] transaction started
[2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
[2015-02-26 03:28] [ALPM] transaction completed
[2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
[2015-02-26 03:29] [ALPM] transaction started
[2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
[2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
[2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
[2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
[2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
Xorg doesn't start after reboot and I found following kernel message:
kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
and /var/log/Xorg.0.log looks like this:
[ 5.591]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 5.591] X Protocol Version 11, Revision 0
[ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
[ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
[ 5.591] Build Date: 22 February 2015 12:52:47PM
[ 5.591]
[ 5.592] Current version of pixman: 0.32.6
[ 5.592] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
[ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.598] (==) ServerLayout "ServerLayout0"
[ 5.598] (==) No screen section available. Using defaults.
[ 5.598] (**) |-->Screen "Default Screen Section" (0)
[ 5.598] (**) | |-->Monitor "<default monitor>"
[ 5.599] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.599] (**) | |-->Device "Device0"
[ 5.599] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.599] (**) Option "BlankTime" "0"
[ 5.599] (**) Option "StandbyTime" "0"
[ 5.599] (**) Option "SuspendTime" "0"
[ 5.599] (**) Option "OffTime" "0"
[ 5.599] (==) Automatically adding devices
[ 5.599] (==) Automatically enabling devices
[ 5.599] (==) Automatically adding GPU devices
[ 5.608] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.608] (**) Extension "Composite" is disabled
[ 5.608] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.608] (II) Loader magic: 0x829e700
[ 5.608] (II) Module ABI versions:
[ 5.608] X.Org ANSI C Emulation: 0.4
[ 5.608] X.Org Video Driver: 19.0
[ 5.608] X.Org XInput driver : 21.0
[ 5.608] X.Org Server Extension : 9.0
[ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
[ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.613] (II) LoadModule: "glx"
[ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.632] (II) Module glx: vendor="X.Org Foundation"
[ 5.632] compiled for 1.17.1, module version = 1.0.0
[ 5.632] ABI class: X.Org Server Extension, version 9.0
[ 5.632] (==) AIGLX enabled
[ 5.632] (==) Matched nouveau as autoconfigured driver 0
[ 5.632] (==) Matched nv as autoconfigured driver 1
[ 5.632] (==) Matched nouveau as autoconfigured driver 2
[ 5.632] (==) Matched nv as autoconfigured driver 3
[ 5.632] (==) Matched modesetting as autoconfigured driver 4
[ 5.632] (==) Matched fbdev as autoconfigured driver 5
[ 5.632] (==) Matched vesa as autoconfigured driver 6
[ 5.632] (==) Assigned the driver to the xf86ConfigLayout
[ 5.632] (II) LoadModule: "nouveau"
[ 5.632] (WW) Warning, couldn't open module nouveau
[ 5.632] (II) UnloadModule: "nouveau"
[ 5.632] (II) Unloading nouveau
[ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.633] (II) LoadModule: "nv"
[ 5.633] (WW) Warning, couldn't open module nv
[ 5.633] (II) UnloadModule: "nv"
[ 5.633] (II) Unloading nv
[ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.633] (II) LoadModule: "modesetting"
[ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.634] compiled for 1.17.1, module version = 1.17.1
[ 5.634] Module class: X.Org Video Driver
[ 5.634] ABI class: X.Org Video Driver, version 19.0
[ 5.634] (II) LoadModule: "fbdev"
[ 5.634] (WW) Warning, couldn't open module fbdev
[ 5.634] (II) UnloadModule: "fbdev"
[ 5.634] (II) Unloading fbdev
[ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.634] (II) LoadModule: "vesa"
[ 5.634] (WW) Warning, couldn't open module vesa
[ 5.634] (II) UnloadModule: "vesa"
[ 5.634] (II) Unloading vesa
[ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.634] (++) using VT number 7
[ 5.635] (II) modeset(0): using drv /dev/dri/card0
[ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.636] (==) modeset(0): RGB weight 888
[ 5.636] (==) modeset(0): Default visual is TrueColor
[ 5.636] (II) Loading sub module "glamoregl"
[ 5.636] (II) LoadModule: "glamoregl"
[ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.647] compiled for 1.17.1, module version = 1.0.0
[ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
[ 5.772] (II) glamor: EGL version 1.4 (DRI2):
[ 5.786] (II) modeset(0): glamor initialized
[ 5.786] (II) Loading sub module "dri2"
[ 5.786] (II) LoadModule: "dri2"
[ 5.786] (II) Module "dri2" already built-in
[ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
[ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
[ 5.950] (II) modeset(0): Output TV-0 has no monitor section
[ 6.006] (II) modeset(0): EDID for output DVI-0
[ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
[ 6.006] (II) modeset(0): Year: 2011 Week: 8
[ 6.006] (II) modeset(0): EDID Version: 1.3
[ 6.006] (II) modeset(0): Digital Display Input
[ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 6.006] (II) modeset(0): Gamma: 2.20
[ 6.006] (II) modeset(0): DPMS capabilities: Off
[ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 6.006] (II) modeset(0): First detailed timing is preferred mode
[ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 6.006] (II) modeset(0): Supported established timings:
[ 6.006] (II) modeset(0): 720x400@70Hz
[ 6.006] (II) modeset(0): 640x480@60Hz
[ 6.006] (II) modeset(0): 640x480@67Hz
[ 6.006] (II) modeset(0): 640x480@72Hz
[ 6.006] (II) modeset(0): 640x480@75Hz
[ 6.006] (II) modeset(0): 800x600@56Hz
[ 6.006] (II) modeset(0): 800x600@60Hz
[ 6.006] (II) modeset(0): 800x600@72Hz
[ 6.006] (II) modeset(0): 800x600@75Hz
[ 6.006] (II) modeset(0): 832x624@75Hz
[ 6.006] (II) modeset(0): 1024x768@60Hz
[ 6.006] (II) modeset(0): 1024x768@70Hz
[ 6.006] (II) modeset(0): 1024x768@75Hz
[ 6.006] (II) modeset(0): 1280x1024@75Hz
[ 6.006] (II) modeset(0): 1152x864@75Hz
[ 6.006] (II) modeset(0): Manufacturer's mask: 0
[ 6.006] (II) modeset(0): Supported standard timings:
[ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
[ 6.007] (II) modeset(0): Monitor name: SMBX2331
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.007] (II) modeset(0): EDID (in hex):
[ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
[ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
[ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
[ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
[ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
[ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
[ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
[ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
[ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
[ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
[ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
[ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
[ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
[ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
[ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
[ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
[ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6.063] (II) modeset(0): EDID for output DVI-1
[ 6.116] (II) modeset(0): EDID for output TV-0
[ 6.116] (II) modeset(0): Output DVI-0 connected
[ 6.116] (II) modeset(0): Output DVI-1 disconnected
[ 6.116] (II) modeset(0): Output TV-0 disconnected
[ 6.116] (II) modeset(0): Using exact sizes for initial modes
[ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.116] (==) modeset(0): DPI set to (96, 96)
[ 6.116] (II) Loading sub module "fb"
[ 6.116] (II) LoadModule: "fb"
[ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.118] (II) Module fb: vendor="X.Org Foundation"
[ 6.118] compiled for 1.17.1, module version = 1.0.0
[ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.118] (==) Depth 24 pixmap format is 32 bpp
[ 6.462] (==) modeset(0): Backing store disabled
[ 6.462] (==) modeset(0): Silken mouse enabled
[ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.535] (==) modeset(0): DPMS enabled
[ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
[ 6.535] (II) modeset(0): [DRI2] Setup complete
[ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
[ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
[ 6.535] (--) RandR disabled
[ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.552] (II) AIGLX: Loaded and initialized nouveau
[ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
[ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.741] (II) LoadModule: "evdev"
[ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.744] (II) Module evdev: vendor="X.Org Foundation"
[ 6.744] compiled for 1.16.2, module version = 2.9.1
[ 6.744] Module class: X.Org XInput Driver
[ 6.744] ABI class: X.Org XInput driver, version 21.0
[ 6.744] (II) Using input driver 'evdev' for 'Power Button'
[ 6.744] (**) Power Button: always reports core events
[ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.744] (--) evdev: Power Button: Found keys
[ 6.744] (II) evdev: Power Button: Configuring as keyboard
[ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.744] (**) Option "xkb_rules" "evdev"
[ 6.744] (**) Option "xkb_model" "pc104"
[ 6.744] (**) Option "xkb_layout" "us"
[ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.780] (II) Using input driver 'evdev' for 'Power Button'
[ 6.780] (**) Power Button: always reports core events
[ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.780] (--) evdev: Power Button: Found keys
[ 6.780] (II) evdev: Power Button: Configuring as keyboard
[ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.780] (**) Option "xkb_rules" "evdev"
[ 6.780] (**) Option "xkb_model" "pc104"
[ 6.780] (**) Option "xkb_layout" "us"
[ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 6.781] (II) No input driver specified, ignoring this device.
[ 6.781] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
[ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 6.785] (II) No input driver specified, ignoring this device.
[ 6.785] (II) This device may have been added with another device file.
[ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.785] (**) Option "xkb_rules" "evdev"
[ 6.785] (**) Option "xkb_model" "pc104"
[ 6.785] (**) Option "xkb_layout" "us"
[ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.803] (EE)
[ 6.803] (EE) Backtrace:
[ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
[ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
[ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
[ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
[ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
[ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
[ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
[ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
[ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
[ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
[ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
[ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
[ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
[ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
[ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
[ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
[ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
[ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
[ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
[ 6.814] (EE)
[ 6.814] (EE) Segmentation fault at address 0x0
[ 6.814] (EE)
Fatal server error:
[ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 6.814] (EE)
[ 6.814] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6.814] (EE)
[ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6.817] (EE) Server terminated with error (1). Closing log file.
Note the segfault in modesetting_drv.so!
Any help?
I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
Is it possible that any old config files can cause this?
EDIT:
I tried kernel parameter "nouveau.modeset=0" but it didn't help.
Last edited by cro (2015-02-26 16:33:19)Ok, I guess I solved it by reinstalling xf86-video-nouveau.
Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
And why does that lead to mysterious error messages and segfault??
I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1. -
FF doesn't start after update to version 27.0.1
FF doesn't start after update to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.
-
The browser doesn't start after turning off and turning on the computer
The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!
Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you -
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US -
IMac - Display doesn´t work after restart
My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.
-
DBConsole Service doesn't start after Install OAS F&R-Services Win 10g
Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AMHi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks. -
Teamviewer doesn't start after resume from hibernation
Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
I issued command "teamviewer --daemon start" but no success.Quote from: BOSSKILLER on 07-July-08, 00:03:29
That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
Regards. -
My macbook air doesn't start after being for 2 months off? What can i do?
Plug it in and leave it on the charger for about 5 minutes then try to turn it on. If that doesnt work, contact apple and have it sent out for repair or take it to your local apple store. they will probably cover it for free if no physical damage has been done.
-
SAP system doesn't automatically start after restart (but manual start ok)
Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinnhi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun -
Mac OS X 10.4.8 doesn't start after upgrade to 10.4.10
Hi everybody!
I've upgraded my Mac OS X 10.4.8 to 10.4.10 and after restart it doesn't start anymore I also have BootCamp installed and Windows boots now even if I choose to start Mac OS. I've tried boot it in safe and verbose mode but computer boots Windows instead (
How could I run Mac OS? Maybe it's possible to return to the "before update" state?
Thanks in advance!To return to the before state you need to boot from your Tiger installer disk. Run Disk Utilities and Repair Disk. Then choose to do an Archive & Install.
-
Mountain Lion Setup doesn't start after reboot
I have a curious problem:
I wanted to upgrade my MBP to ML, but it doesn't work. I start the installation script, accept the licence agreement and choose the SSD as the installation target. The installation script prepares the installation (Install OS X data folder is created in the root directory) and want to restart the MBP to execute the installation.
But the restart doesn't start the upgrade, it starts the login screen and after that I'm back on my old 10.7.4-based desktop without any installation. What's getting wrong here? How can I force starting the prepared installation after reboot?
My SSD is encrypted with FileVault 2, maybe this is a relevant information.
How can I upgrade my MBP? Please help!Unfortunately this is not the reason.
It doesnt't make any difference if FIleVault is activated or not. I decrypted the complete disk, but the problem still remains.
Any ideas? I can't believe that ML ist not installable on a six-month-old MBP :-( -
Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN
Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
I had already restore the system.
So, I use my laptop to work, and it has only 4 days of use.
I need help! Thanks!Hi,
Run through the following procedure.
Boot the computer normally and log-in.
At the black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( including spaces ) and hit enter.
Dism /Online /Cleanup-Image /RestoreHealth
This will take a while to complete, but when it’s finished, restart the notebook.
If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( there's a space between sfc and the / ) and hit enter.
Sfc /scannow
When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
Restart the notebook again.
Any change?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
VMWare doesn't start after kernel update
Hello,
I've just updated my kernel to 3.10.0-997-generic. After that VMWare Player doesn't start anymore.
I've tried to run patches and different solutions I found in google, but it didn't worked yet.
This is the log of my last attempt.
Thanks in advance
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Log for VMware Workstation pid=14806 version=9.0.2 build=build-1031769 option=Release
2013-06-14T21:42:29.306-03:00| vthread-3| I120: The process is 64-bit.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host is Linux 3.10.0-997-generic Ubuntu 12.10
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-14T21:42:29.306-03:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-14806.log
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Created new pathsHash.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-14T21:42:29.320-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.320-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.322-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.322-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.324-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.324-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.326-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.326-03:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-14T21:42:29.328-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Obtaining info using the running kernel.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Setting header path for 3.10.0-997-generic to "/lib/modules/3.10.0-997-generic/build/include".
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Update kernel header path to /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.524-03:00| vthread-3| I120: Found compiler at "/usr/bin/gcc"
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.526-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Using user supplied compiler "/usr/bin/gcc".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: No matching PBM set was found for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.538-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.539-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.545-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Using temp dir "/tmp".
2013-06-14T21:42:29.547-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.548-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.548-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.550-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.550-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.552-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Setting destination path for vmnet to "/lib/modules/3.10.0-997-generic/misc/vmnet.ko".
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Successfully extracted the vmnet source.
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmnet-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:31.977-03:00| vthread-3| W110: Failed to build vmnet. Failed to execute the build command.
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Setting destination path for vmblock to "/lib/modules/3.10.0-997-generic/misc/vmblock.ko".
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Extracting the vmblock source from "/usr/lib/vmware/modules/source/vmblock.tar".
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Successfully extracted the vmblock source.
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmblock-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:33.429-03:00| vthread-3| W110: Failed to build vmblock. Failed to execute the build command.
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Setting destination path for vmci to "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Extracting the vmci source from "/usr/lib/vmware/modules/source/vmci.tar".
2013-06-14T21:42:33.445-03:00| vthread-3| I120: Successfully extracted the vmci source.
2013-06-14T21:42:33.446-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmci-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Successfully built vmci. Module is currently at "/tmp/modconfig-YkpUyf/vmci.o".
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Found the vmci symvers file at "/tmp/modconfig-YkpUyf/vmci-only/Module.symvers".
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Installing vmci from /tmp/modconfig-YkpUyf/vmci.o to /lib/modules/3.10.0-997-generic/misc/vmci.ko.
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Registering file "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:36.234-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2013-06-14T21:42:36.234-03:00| vthread-3| I120: Registering file "/usr/lib/vmware/symvers/vmci-3.10.0-997-generic".
2013-06-14T21:42:36.686-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.Before
create file "/usr/lib/vmware/settings"
after
create file "/root/.vmware/config"
after
create file "/root/.vmware/preferences"
And after
Install the build-essential package:
sudo apt-get install build-essential
VMware Workstation 11.1.0 and Player (Pro) 7.1.0 support kernels up to 3.18. You can apply a patch:
curl http://pastie.org/pastes/9934018/download -o /tmp/vmnet-3.19.patch
cd /usr/lib/vmware/modules/source
tar -xf vmnet.tar
patch -p0 -i /tmp/vmnet-3.19.patch
tar -cf vmnet.tar vmnet-only
rm -r *-only
vmware-modconfig --console --install-all
I tried, worked
Maybe you are looking for
-
I restarted my iphone after it wouldnt stop restarting every 5 seconds so i plugged it into i tunes backed it up and restored it but when i did my phone had no data and that back up i made is gone... is there anyway i can get this back please eveythi
-
How do I get picture messaging to work?
when I try to send a picture along with any text message I send out the text goes through just fine but when the picture goes out it says not delivered wheat could be the problem/issue?
-
Hyperion Reporting 7.21 - E-mail / SMPT Configuration
Good afternoon, I need to update my SMTP configuration to point to our new Exchange server as my Scheduler within HR no longer sends e-mails. I have updated our hr_global.properties file to reflect the new server and recycled the services. I can also
-
Flex datagrid data on datachange
Hi all, I am using an extended datagrid which takes its height on the basis of measured height of items. Item renderer for datagrid is a canvas. Which holds one more canvas(header for item renderer) and a text area. The problem I am facing is with th
-
PCAnywhere connection over T1 between two 1720 routers with 12.3(15a)IOS not working. Same two PC's locally are woring. I am just setting up these two routers for a new T1 connection and testing it in house over a T1 crossover cable. I am able to pin