Tiger OS X10.4.2 Installation Problem, nothing on posts have worked

I am using an iBook G4, with a 1.33GHz PowerPC G4 processor, with 256 MB memory. I am currently running Panther OS X 10.3.9 and looking to install Tiger 10.4.2. When I restart the computer and hold c with the Tiger disc in, I continually get the "This cannot be installed on this computer" message. I have tried using the disk utility to verify the disc permissions of the installation disc and I recieve the package error message. After this, I checked to see if my BaseSystem.pkg was in my Receipts folder, and it was. I did not get an option to verify the disk as this button was unclickable, I could only click verify disc permissions. I have also verified the disc permissions and repaired disc on my hard drive. There is not firmware updates needed for my computer.
I have checked all over this forum and have tried everything I have seen suggested. Thanks for any further suggestions!
iBook   Mac OS X (10.3.9)  

What color is the Tiger installer disk? If it is grey, does the label say is it for your iBook or for some other Mac model? Only a black, retail Tiger disk or a grey one for your specific model will reliably install Tiger on your iBook.
To repair your hard drive, or to verify it in 10.3.x, you must start up from another drive that has Disk Utility on it -- you cannot repair the drive you start up from.
If your Tiger disk qualifies as above, you can restart from it by holding down the "c" key during restart, then select Disk Utility from the "Utilities" menu of the Installer (do not run the installer). This should allow you to repair the hard drive.

Similar Messages

  • Tiger Installation Problems, Monitor Doesn't Have Picture

    *Originally Posted in Tiger Support Discussions but no response.*
    Hi every1,
    I'm having problems as well trying to install Tiger on my power mac G3. I did the software exchange thing where I got CD's in place of the DVD. During installation,I restart the computer w/ the CD in drive, the computer starts but my monitor doesn't come on.
    I've been looking through the discussions and no 1 is having the same problem i'm having. I downloaded the firmware but when I go 2 install it, A message says the firmware is the latest and doesn't need 2 be upgraded. Could it be a problem w/my Viewsonic LCD VE701b Monitor. Do I need 2 upgrade the video card or is there some other problem?
    Power Mac G3 350mhz
    1gb Ram (PNY Technologies)
    Tempo ATA 133 PCI Card
    Western Digital80gb hard drive, 4 partitions
    currently using Mac OS 9.2.2 on main HD (8gb, 6.40gbs remaining)
    Partition I want 2 install Tiger is 23.30gb
    Any info will be helpful.
    Thanks every1,
    Andrea
    Pt. 2
    Hey every1,
    I see U are stumped as well but anyway, I've been doing research and here's what I did.
    1. I reset the PRAM, Nothing.
    2. I reset the PMU, Still Nothing.
    3. Emailed Tech Support at ViewSonic, (Awaiting a response).
    Anybody have any other suggestions? Could it be corrupt CD?
    Thanks,
    Andrea

    Take a look at this thread for useful stuff about the Oxford chipset:
    http://forums.macosxhints.com/archive/index.php/t-55470.html
    Your computer cannot give you USB2, and USB1 is very very slow, useless for tasks like backing up that involve transfers of large chunks of data. With what is built in on a B&W, your only choice is FW.
    The Oxford chipset is not the only one that works, but we know it does and those enclosures give you both stability and the ability to boot from the external drive.
    p.s. I responded to this earlier this morning. Are posts getting lost?

  • Solution for PS CS3 installation problem on Vista does not work.

    I encountered the much discussed 2739 error when trying to install PS CS3 on Vista Ultimate. I followed the proposed solution. But instead of a dialog box I received the message: not recognized. I have the latest update of Java installed and I have IE as my default browser.
    What now? Return CS3?

    I did and got a friendly guy who apparently had never heard of the 2739 error. I was hoping to get some support here. In another thread I read something about holding the installation window until installation starts. I can try it, but I doubt I am quick enough before the error window opens.

  • My Iphone 4s just went blank today.  I have tried charging, rebooting, restoring, and now recovering.  Nothing seems to have worked  While trying to recover, my Itunes says "waiting for Iphone"  My screen shows the Apple logo and a status bar.  It's 2 hrs

    Help!!!  Been close to 3 hrs now

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • OAS 8.0.4.20a installation problem

    Discussion Groups
    JDeveloper
    OAS 4.0.8 installation problem
    profile | register | preferences | faq | search
    next newest topic | next oldest topic
    Author Topic: OAS 4.0.8 installation problem
    mchow911
    unregistered posted December 17, 1999 05:58 PM
    I tried to install OAS 4.0.8.2 on a WinNT4 server with SP5 and got no luck. This is my home PC with Enternet card.But did not conectted with other PC. Installation seems OK. When I try to start OAS, The error message I got is
    " starting wrb service 2"
    PANIC: YS::ERROR::BADFRAME in oassrv at line 66 of m:\128ro0521\ows\srchome\ys\s
    rc\ys\yse.c
    pls help urgent

    hi
    right now i am working in oas4
    please contact me with grater detail.
    __ prasad
    null

  • Solution to common Windows 7 Xfi Elite Pro installation problem

    Solution to common Windows 7 Xfi Elite Pro installation problems Hello,? I have just solved what I understand to be a common problem when upgrading a machine with an Xfi Elite Pro from XP to 64 bit Windows 7. Apparently the console control software for the "older" PCI Soundblaster cards for Win7 isn't done yet. If you've installed Win 7, updated the product identification module and run the new driver that you can find easily on Creative's support site and you still have no sound, try going to the Control Panel in windows. Switch the display to the "small icons" option and select "sounds".
    Choose the "playback" tab. You should find a list of possible sound output devices that exist on your machine. You need to highlight the Xfi on that list and then click the "Set as default" button at the bottom of the screen. That should do it for you.
    It did it for me.

    C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • Installation problems upgrading to Tiger

    i just recently bought the Tiger update and was so eager to try it out. But... I couldn't even try and install it `cos the installation CD keeps getting itself ejected. It just sorta makes this continous noise inside there and then ejects it. Happens everytime. I rechecked the requirements thinking I went somewhere wrong with that. I dismissed the firewire bit prior to buying the Tiger pack, thinking it was no big deal.. cos I don't have it in my PowerBook G4. Could that be the reason?
    Pls advice
    PowerBook G4 (1GHz/867MHz)   Mac OS X (10.2.x)  
      Mac OS X (10.2.x)  

    Hi nysh,
    first of all: WELCOME TO THE DISCUSSIONS!
    Your PowerBook does have built-in firewire and is fully compatible with Tiger: PowerBook G4 (1GHz/867MHz) - Technical Specifications
    Make sure you have the retail full install DVD (black), then follow this procedure: 10.4 Tiger Upgrade: Decision tree+Checklist
    If this answered your question please consider granting some stars: Why reward points?

  • 10.4.3 Post Installation Problem

    I have upgraded to 10.4.3 on my G4 Titanium laptop, from the installation disc, and the installation seemed to go fine. However, the hard drive icon does not appear on the desktop and nothing happens when I click finder in the dock. Although, clicking the other doc icons opens their respective apps with no problems (except for dashboard which opens but doesn't seem to connect to the internet). What's going on here? Any thoughts?

    Do the following:
    Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.0.6 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Then re-apply the 10.4.3 Combo Updater. Assuming your system wasn't corrupted badly this may get you back to normal.

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • [Solved] Installation problem on HP-UX

    Hi there,
    I try to install Oracle Database 10g Release 2 on an HP-UX system.
    You'll find below the result of uname -a if it can help.
    HP-UX c3750 B.11.11 U9000/785 2015203204 unlimited-user licenseWhen I run "runInstaller" in a terminal, here is what is being displayed.
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be B.11.23 or B.11.11.    Actual B.11.11
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-03-22_12-13-41PM. Please wait ...$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.Then, I got a new window appearing asking me where to install Oracle DB and if I want to create a database.
    Of course, I leave the default choice for the installation directory (the oracle $HOME is correctly setup and selected)
    Then, when I press "Next", the window closes and here is what I have in the terminal. ps : The same thing is happening if I decide to create a database or not.
    java.io.FileNotFoundException: /tmp/OraInstall2012-03-22_12-13-41PM/oui/instImages/images.properties (No such file or directory)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(FileInputStream.java:106)
            at java.io.FileInputStream.<init>(FileInputStream.java:66)
            at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.loadProperties(OiifmSplashScreen.java:444)
            at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<clinit>(OiifmSplashScreen.java:93)
            at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:259)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
            at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
            at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1957)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2185)
    Exception java.lang.ExceptionInInitializerError occurred..
    java.lang.ExceptionInInitializerError
            at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:259)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
            at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
            at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1957)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2185)
    Caused by: java.lang.NumberFormatException: null
            at java.lang.Integer.parseInt(Integer.java:436)
            at java.lang.Integer.<init>(Integer.java:609)
            at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<clinit>(OiifmSplashScreen.java:103)
            ... 7 more
    Exception in thread "main" java.lang.NoClassDefFoundError
            at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:259)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
            at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
            at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
            at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1957)
            at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2185)And that's it, nothing more is happening :(.
    After searching on the internet, some messages said it might be because the dowload is corrupted, so they suggested to download it again. I have done so but the same problem appears again.
    Have you got any idea what is going wrong there.
    Thank you VERY much in advance and sorry for my bad English (this is not my native language).
    Edited by: 916761 on 23 mars 2012 03:36

    Hi;
    You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account.
    This site is oracle site for tech. documents for can rise SR etc.. for more details please check Re: Installing Oracle Database 10.2.0.4
    you need to customer support identifier which is called CSI for can login metalink(https://support.oracle.com/CSP/ui/flash.html)
    If you dont have metalink account there is no legal way to see this doc
    Pretty simple process:
    1) You purchase a perpetual or term license from Oracle;
    2) At the beginning of the period, during the valid term you purchase
    Support for the period (1 year);
    3) Oracle sends you the CSI.
    Easy to do at http://store.oracle.com armed with a credit card.
    Sorry, I'm sure you'll think I'm stupidNo I dont think mate :)
    Regard
    Helios

  • PPStream installation problem on Windows 7

    I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
    I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

    很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
    very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

  • Installation problem sap 4.7

    hi all,
    i got installation problem while installing sap 4.7 on my pc
    the error is ,
    INFO 2008-03-21 00:03:16
    Processing of host operation t_HostInfo_SHARED succeeded.
    INFO 2008-03-21 00:03:25
    The 'saploc' share exists at directory 'F:\usr\sap'. Choosing drive F: as SAP System drive.
    INFO 2008-03-21 00:04:51
    Copying file E:/DUMP/db3/ker/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
    INFO 2008-03-21 00:04:51
    Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
    INFO 2008-03-21 00:06:02
    Copying file E:/DUMP/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
    INFO 2008-03-21 00:06:02
    Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
    INFO 2008-03-21 00:06:02
    Copying file system node E:\DUMP\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
    INFO 2008-03-21 00:06:02
    Processing of all file system node operations of table tORA_filecopy succeeded.
    INFO 2008-03-21 00:06:02
    Copying file E:/DUMP/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
    INFO 2008-03-21 00:06:02
    Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
    INFO 2008-03-21 00:06:02
    Copying file system node E:\DUMP\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
    INFO 2008-03-21 00:06:02
    Processing of all file system node operations of table tORA_filecopy succeeded.
    INFO 2008-03-21 00:06:05
    Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:06:05
    Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
    INFO 2008-03-21 00:06:05
    Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:06:10
    Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:06:10
    Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
    INFO 2008-03-21 00:06:10
    Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:06:13
    Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:06:13
    Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
    INFO 2008-03-21 00:06:13
    Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
    INFO 2008-03-21 00:07:05
    Package table created
    PHASE 2008-03-21 00:07:11
    SAP R/3 Enterprise 4.70 for Oracle
    PHASE 2008-03-21 00:07:11
    SAP Web Application Server
    PHASE 2008-03-21 00:07:11
    Request common parameters of SAP System
    PHASE 2008-03-21 00:07:11
    Create operating system accounts
    INFO 2008-03-21 00:07:12
    Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
    INFO 2008-03-21 00:07:12
    Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
    INFO 2008-03-21 00:07:12
    Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
    INFO 2008-03-21 00:07:12
    Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
    INFO 2008-03-21 00:07:12
    Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
    INFO 2008-03-21 00:07:12
    Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
    INFO 2008-03-21 00:07:12
    Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.2.XML.
    INFO 2008-03-21 00:07:12
    Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.2.XML.
    INFO 2008-03-21 00:07:12
    Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.3.XML.
    INFO 2008-03-21 00:07:12
    Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.3.XML.
    INFO 2008-03-21 00:07:12
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1002 ACCOUNTNAME=sap-r3\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
    INFO 2008-03-21 00:07:12
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1003 ACCOUNTNAME=sap-r3\SAP_ERP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
    INFO 2008-03-21 00:07:12
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1004 ACCOUNTNAME=sap-r3\SAP_ERP_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
    INFO 2008-03-21 00:07:12
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1005 ACCOUNTNAME=ORA_ERP_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
    INFO 2008-03-21 00:07:12
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1006 ACCOUNTNAME=ORA_ERP_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
    INFO 2008-03-21 00:07:12
    Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
    INFO 2008-03-21 00:07:15
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1007 ACCOUNTNAME=sap-r3\erpadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=sap-r3\SAP_ERP_GlobalAdmin,sap-r3\Users,Administrators,ORA_ERP_DBA,ORA_ERP_OPER,sap-r3\SAP_LocalAdmin,sap-r3\SAP_ERP_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
    INFO 2008-03-21 00:07:15
    Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1008 ACCOUNTNAME=sap-r3\SAPServiceERP ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=sap-r3\SAP_ERP_GlobalAdmin,Administrators,ORA_ERP_DBA,ORA_ERP_OPER,sap-r3\SAP_LocalAdmin,sap-r3\SAP_ERP_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
    INFO 2008-03-21 00:07:15
    Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    PHASE 2008-03-21 00:07:16
    Request operating system user information
    INFO 2008-03-21 00:07:30
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:30
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:31
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:31
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:32
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:32
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:33
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:33
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-03-21 00:07:34
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2008-03-21 00:07:34
    Adapt filesystem
    PHASE 2008-03-21 00:07:34
    Prepare check/adapt SAP instance filesystem
    INFO 2008-03-21 00:07:34
    File system node F:\usr\sap exists.
    INFO 2008-03-21 00:07:34
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap/ERP exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap/tmp exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/tmp exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/EPS exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/EPS/in exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/EPS/out exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/EPS/log exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/bin exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/buffer exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/cofiles exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/data exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/etc exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/log exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    File system node F:\usr\sap\trans/sapnames exists already. Nothing to do.
    INFO 2008-03-21 00:07:35
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-03-21 00:07:36
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-03-21 00:07:36
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    PHASE 2008-03-21 00:07:37
    Extract archives
    INFO 2008-03-21 00:07:37
    Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
    PHASE 2008-03-21 00:07:37
    Extract SAP System kernel archives
    WARNING 2008-03-21 00:07:39
    PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
    INFO 2008-03-21 00:07:39
    Creating file C:\SAPinst ORACLE KERNEL\SAPMMC.SAR.log.
    INFO 2008-03-21 00:07:39
    SAPCAR -xvgf E:/DUMP/db3/ker/NT/I386/MMC/SAPMMC.SAR, -R C:\SAPinst ORACLE KERNEL succeeded. (See output in './SAPMMC.SAR.log'.)
    INFO 2008-03-21 00:07:39
    While copying node C:\SAPinst ORACLE KERNEL/sapmmc.dll to C:\WINNT\system32/sapmmc.dll: source is not newer than the target. Nothing to do.
    INFO 2008-03-21 00:07:39
    While copying node C:\SAPinst ORACLE KERNEL/sapmmcada.dll to C:\WINNT\system32/sapmmcada.dll: source is not newer than the target. Nothing to do.
    INFO 2008-03-21 00:07:39
    While copying node C:\SAPinst ORACLE KERNEL/sapmmcdb6.dll to C:\WINNT\system32/sapmmcdb6.dll: source is not newer than the target. Nothing to do.
    INFO 2008-03-21 00:07:39
    While copying node C:\SAPinst ORACLE KERNEL/sapmmcinf.dll to C:\WINNT\system32/sapmmcinf.dll: source is not newer than the target. Nothing to do.
    INFO 2008-03-21 00:07:39
    While copying node C:\SAPinst ORACLE KERNEL/sapmmcms.dll to C:\WINNT\system32/sapmmcms.dll: source is not newer than the target. Nothing to do.
    INFO 2008-03-21 00:07:39
    Processing of all file system node operations of table t_SAPComponent_Archives_Copy_SHARED succeeded.
    WARNING 2008-03-21 00:07:40
    PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
    INFO 2008-03-21 00:07:40
    Creating file C:\SAPinst ORACLE KERNEL\DBATOOLS.SAR.log.
    INFO 2008-03-21 00:07:40
    SAPCAR -xvgf E:/DUMP/db3/ker/NT\I386\DBATOOLS.SAR, -R F:\usr\sap\ERP\SYS\exe\run succeeded. (See output in './DBATOOLS.SAR.log'.)
    INFO 2008-03-21 00:07:41
    Evaluating all 'tNT_RegistryEntries' table rows succeeded.
    INFO 2008-03-21 00:07:41
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2008-03-21 00:07:41
    Create service ports
    PHASE 2008-03-21 00:07:41
    Generate instance profiles
    PHASE 2008-03-21 00:07:42
    Versionize default profile, instance profile and start profile
    INFO 2008-03-21 00:07:42
    Processing of all file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED succeeded.
    INFO 2008-03-21 00:07:42
    Processing of adapt operation t_SAPComponent_Profiles_SHARED succeeded.
    INFO 2008-03-21 00:07:43
    'F:\oracle\ora81/bin/lsnrctl stop' returned with '0'.
    INFO 2008-03-21 00:07:43
    Moving file F:/oracle/ora81/network/admin/listener.ora to: F:\oracle\ora81/network/admin/listener.ora.bak.
    INFO 2008-03-21 00:07:43
    Creating file F:\oracle\ora81\network\admin\listener.ora.
    INFO 2008-03-21 00:07:44
    Moving file F:/oracle/ora81/network/admin/sqlnet.ora to: F:\oracle\ora81/network/admin/sqlnet.ora.bak.
    INFO 2008-03-21 00:07:44
    Creating file F:\oracle\ora81\network\admin\sqlnet.ora.
    INFO 2008-03-21 00:07:44
    Moving file F:/oracle/ora81/network/admin/tnsnames.ora to: F:\oracle\ora81/network/admin/tnsnames.ora.bak.
    INFO 2008-03-21 00:07:44
    Creating file F:\oracle\ora81\network\admin\tnsnames.ora.
    INFO 2008-03-21 00:07:45
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-03-21 00:07:45
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\saptrace.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/saptrace with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\saptrace\background.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/saptrace/background with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\saptrace\usertrace.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/saptrace/usertrace with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapreorg.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapreorg with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\saparch.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/saparch with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\oraarch.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/oraarch with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapcheck.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapcheck with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapbackup.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapbackup with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\origlogA.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP\origlogA with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\mirrlogA.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP\mirrlogA with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\origlogB.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP\origlogB with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\mirrlogB.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP\mirrlogB with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\cntrl.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1/cntrl with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\saparch\cntrl.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/saparch/cntrl with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\origlogA\cntrl.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP\origlogA\/cntrl with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-03-21 00:07:46
    File system node F:\oracle\ERP/sapdata1 exists already. Nothing to do.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata5.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata5 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\erp_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1\erp_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\erp_2.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1\erp_2 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\erp_3.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1\erp_3 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2\erp_4.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2\erp_4 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2\erp_5.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2\erp_5 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2\erp_6.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2\erp_6 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3\erp_7.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3\erp_7 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3\erp_8.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3\erp_8 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3\erp_9.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3\erp_9 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4\erp_10.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4\erp_10 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4\erp_11.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4\erp_11 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4\erp_12.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4\erp_12 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata5\erp_13.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata5\erp_13 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata5\erp_14.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata5\erp_14 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6\erp_15.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6\erp_15 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6\erp_16.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6\erp_16 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\erp620_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1\erp620_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2\erp620_2.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2\erp620_2 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3\erp620_3.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3\erp620_3 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4\erp620_4.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4\erp620_4 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata4\erp620_5.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata4\erp620_5 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata5\erp620_6.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata5\erp620_6 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata5\erp620_7.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata5\erp620_7 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6\erp620_8.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6\erp620_8 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6\erp620_9.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6\erp620_9 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata6\erpusr_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata6\erpusr_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata2\roll_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata2\roll_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata3\temp_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata3\temp_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Creating directory F:\oracle\ERP\sapdata1\system_1.
    INFO 2008-03-21 00:07:46
    Creating file system node F:\oracle\ERP/sapdata1\system_1 with type DIRECTORY succeeded.
    INFO 2008-03-21 00:07:46
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-03-21 00:07:46
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-03-21 00:07:47
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-03-21 00:07:47
    Creating file F:\oracle\ora81\database\initERP.ora.
    INFO 2008-03-21 00:07:48
    Creating file F:\oracle\ora81\database\initERP.sap.
    INFO 2008-03-21 00:07:49
    Copying file E:/DUMP/db3/ker/NT/COMMON/INSTALL/INITSID.DBA to: F:\oracle\ora81/database/initERP.dba.
    INFO 2008-03-21 00:07:49
    Creating file F:\oracle\ora81\database\initERP.dba.
    INFO 2008-03-21 00:07:50
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:07:50
    Moving file F:/oracle/ora81/database/initERP.ora to: orig_init_ora_tmp.txt.
    INFO 2008-03-21 00:07:50
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: F:\oracle\ora81\database\initERP.ora.
    INFO 2008-03-21 00:07:50
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2008-03-21 00:07:51
    Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
    INFO 2008-03-21 00:07:55
    See 'F:\oracle\ora81/bin/oradim -new -sid ERP -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
    INFO 2008-03-21 00:07:55
    'F:\oracle\ora81/bin/oradim -new -sid ERP -STARTMODE auto' returned with '0'.
    INFO 2008-03-21 00:07:56
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:29
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:31
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:49
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:08:51
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:33
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:35
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:41
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:43
    Moving file F:/oracle/ora81/database/initERP.ora to: orig_init_ora_tmp.txt.
    INFO 2008-03-21 00:09:43
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: F:\oracle\ora81\database\initERP.ora.
    INFO 2008-03-21 00:09:43
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2008-03-21 00:09:43
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:09:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:10:24
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:10:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:11:04
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:11:06
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:11:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:11:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:12:24
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:12:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:13:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:13:07
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:13:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:13:48
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:14:27
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:14:30
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:15:09
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:15:11
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:15:52
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:15:55
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:16:36
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:16:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:17:20
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:17:23
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:18:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:18:08
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:18:51
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:18:54
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:19:37
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:19:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:20:25
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:20:27
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:21:14
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:21:16
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:22:04
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:22:07
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:22:55
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:22:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:23:48
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:23:50
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:24:41
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:24:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:25:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:25:42
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:26:36
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:26:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:27:35
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:27:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:28:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:28:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:29:45
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:31:12
    Task files created
    INFO 2008-03-21 00:31:12
    Command files created
    INFO 2008-03-21 00:31:12
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:31:12
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:31:13
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 02:52:21
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 03:00:31
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 03:28:34
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 05:50:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:18:39
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL2.log
    INFO 2008-03-21 06:18:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:18:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:19:40
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPCLUST.log
    ERROR 2008-03-21 06:19:40
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPPOOL.log
    INFO 2008-03-21 06:19:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:19:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLEXC.log
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSRC.log
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDOCU.log
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSPROT.log
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPUSER.log
    INFO 2008-03-21 06:21:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:21:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:22:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLOAD.log
    ERROR 2008-03-21 06:22:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAP0000.log
    INFO 2008-03-21 06:23:03
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:23:03
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
    ERROR 2008-03-21 06:23:07
    FJS-00012 Error when executing script.
    INFO 2008-03-21 00:31:12
    Task files created
    INFO 2008-03-21 00:31:12
    Command files created
    INFO 2008-03-21 00:31:12
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:31:12
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 00:31:13
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 02:52:21
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 03:00:31
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 03:28:34
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 05:50:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:18:39
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL2.log
    INFO 2008-03-21 06:18:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:18:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:19:40
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPCLUST.log
    ERROR 2008-03-21 06:19:40
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPPOOL.log
    INFO 2008-03-21 06:19:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:19:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLEXC.log
    ERROR 2008-03-21 06:20:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSRC.log
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:20:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDOCU.log
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSPROT.log
    ERROR 2008-03-21 06:21:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPUSER.log
    INFO 2008-03-21 06:21:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2008-03-21 06:21:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:22:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLOAD.log
    ERROR 2008-03-21 06:22:57
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAP0000.log
    INFO 2008-03-21 06:23:03
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    ERROR 2008-03-21 06:23:03
    MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
    ERROR 2008-03-21 06:23:07
    FJS-00012 Error when executing script.
    any body can give the solution please
    thanks
    sareen

    Sareen,
    Seems you are having problem with the Export CD you are using for Installation.Change the Export CD,if possible try to download it from Service Market Place of SAP.
    K.Kiran.

  • Satellite L750 - drivers installation problem

    Hello good people of the internet,
    I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
    When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
    I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
    I actually have problem with more things.
    My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
    So I tried to reinstall the driver but the problem I described above appeared.
    The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
    And the last one, for about a month there are problems with the sound on my notebook.
    First cracking of sound and then it stops working completely and I have to restart the computer.
    Again, I tried to reinstall the sound drivers.
    There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
    Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
    Thank you

    Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
    >My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
    Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
    If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
    To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
    If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
    >The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
    The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

  • X100e win xp pro usb installation problem

    Hello to all, i am new here and sorry for not not introducing myself properly bu this is urgent situation.
    Few days ago i bought Lenovo x100e Netbook
    Product ID: 35086AG
    Athlon MV40(1.6GHz), 1GB RAM, 160GB 5400rpm HD, 11.6in 1366x768 LCD, ATI Radeon HD2200, 802.11bgn wireless, WWAN upgradeable, Bluetooth, 1Gb Ethernet, UltraNav, 3c Li-Ion, WinXP Home 32
    here is link from lenovo driver download site for this netbook:
    http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=35086AG
    Netbook came with preinstalled Win. XP Home edition and i was going to install Win. XP Professional.
    So i created bootable USB stick Win. XP Pro. installation (cause this netbook dont have internal cd drive) and booted on startup and started installation.
    Installation was going smooth -> i choosed C partition, formated it and after formatting next message shows up:
    "The following value in the .SIF file used by Setup is
    corrupted or missing:
    Value 0 on the line in section [SourceDiskFiles]
    with key "SSA.exe."
    Setup cannot continue. To quit Setup, press F3."
    So as you can see...i can't go on with installation and problem is the disk is already formatted and i have nothing on it, no OS no nothing.
    Please help cause i need laptop soon.
    Solved!
    Go to Solution.

    I solved problem,
    As i could not find vanilla, i found standard Win. XP Pro. with SP3, and using nLite added ATI AMD RAID AHCI driver to it and using multiboot 10 put that on USB stick. It booted with no problems and installed
    Thank you for pointing me in right direction.

Maybe you are looking for

  • How can I change the order of iCal calendars listed ON MY MAC?

    After upgrading to Lion the order of calendars listed on the left in iCal changed from my previous choice. I cannot modify the order by dragging a calendar to a different position in the list. I shall appreciate any suggestion to be able to have the

  • How to synchronise my MacBook Air to my Imac

    Hello When I go to my office, I take my MacBook Air When I come back home, what i have done on my MacBook Air is not on my IMac at home. How to synchronise both, so that I can find the emails I have been wroten, the files I have done etc...

  • Output device not listed.

    What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed

  • Adding editable region tags moves my content in non-editable regions

    I have a template based on a template (the first with my navigation, and the second is based on the first with a sidebar added). When I add an editable region to the second template, it moves my sidebar down to leave a gap between the nav bar and the

  • Access key for the Object  !!!

    Hi, In the ABAP Trial version 7.0, while I am trying to create a sample database table 'MYTABLE'  through SE11 it is prompting to register object of R3TR and asking for access key.. From where I can get the access key for this trial version7.0? How c