Tiger OSX Driver for eMagic AMT-8 - AMT no longer seen in AudioMidi

Can anyone here tell me where to find the driver for the AMT-8? It seems "missing" from the Apple and Emagic websites. AudioMidi is still not seeing the interface although "About this Mac" sees it just fine.
Also, no driver for it in the Library like my other interfaces.
All previous links to the driver are no longer valid.
Thanks!
Matt @ Post Pro
[email protected]

That link to the Apple site I've looked at a hundred times. You know, if I look one more time MAYBE it will be there this time. The ONLY one I've seen on there that is close is the Unitor Command software, but that's not quite it. Is it hiding in one of the other 3 folders and I'm just too blind to see it?
If you can email it to me that would be great. Just use the: "[email protected]" address so that I can grab it on the road easier.
Thanks Much!
Matt @ Post Pro

Similar Messages

Need a Tiger compatible driver for my Compaq A3000 printer!

I have the installation disk for my A3000 printer but the drivers are only compatible with Windows. Do anyone know where I can download a Tiger compatible driver? Thanks!

You might be able to print without installing a driver something like GimpPrint may all ready be on your machine. I beleve on the Intel machines there is an button in the Print Setup Utlity that says something like Other Drivers. I don't have an Intel machine so I cain't check. If your machine sees the printer there is a good chance you can print. If not try a third party driver. Look in:
http://www.versiontracker.com

Hi, I'm an eBay seller and save old eBay auction files to my hard drive for future refence. Firefox no longer opens these files correctly (see below).

Hi, I'm an eBay seller and save old eBay auction files to my hard drive for future refence. These files which all use the same name but are saved in a different folder for each eBay auction no longer open correctly -- much of the eBay auction text information shows up for a split second and then disappears -- the area at the top of the saved eBay auction file then collapses -- the original eBay auction photo of the product shows up as well during that split second but disappears when the other auction text disappears. These eBay auction files open correctly when opened using Internet Explorer. In Firefox, Firefox adds some strange information at the end of the file name when it is opened which is not a part of the actual file name itself (i.e. here is the original file name which is the same for whatever ended eBay auction I open: eBayISAPI.dll.htm -- here is the altered file name after Firefox opens it: eBayISAPI.dll_files/eBayISAPI_data/eBayISAPI_002.htm#ht_658wt_1349 -- yes, it is that long -- the last part is slightly different for each separate auction file that I open). None of this happened until recently. The files open this way whether using Firefox 4.0, Firefox 3.6.16, Firefox Safe Mode 3.6.16, and Firefox Safe Mode 4.0.

Here is what I did:
1) In Firefox 4.0, I opened the Bookmarks on the Menu Bar at the top of the screen. I clicked on the Import and Backup menu. I then exported all my bookmarks to the PC's desktop using the default file name BOOKMARKS.HTML.
2) In Firefox, I opened the Add-ons menu under Tools on the Menu Bar. I clicked on the Prnt Scrn key on the top right of the PC's keyboard in order to obtain a screen shot of all the Firefox add-ons. I then opened Microsoft Word and pasted the screen shot using the Control V command (Ctrl V). I then saved the Microsoft Word file on the PC's desktop for future reference.
3) I then opened the Control Panel in the Start menu (accessed from the little Windows world globe on the bottom left of the screen -- the operating system is Windows 7).
4) In the Control Panel, I opened Uninstall A Program in the Programs section.
5) I uninstalled Firefox 4.0 clicking on the box "Remove my Firefox personal data and customizations" in order to remove whatever bug in my Firefox customizations was causing the two errors above (this is the MOST IMPORTANT PART of this whole process which is why I saved all my bookmarks as an HTML file and saved a screen shot of all the Firefox add-ons).
6) I then reinstalled my old Firefox 3.6.16 version obtained from the following link: http://www.mozilla.com/en-US/firefox/all-older.html (I am not yet in favor of using Firefox 4.0 -- you suppose you can reinstall Firefox 4.0 on your system if you want).
7) After Firefox 3.6.16 was reinstalled, I had to import all my old bookmarks. Under Bookmarks on the Firefox Menu Bar at the top of the screen, I clicked on Organize Bookmarks. I then clicked on the Import and Backup menu and then the Import HTML command in order the BOOKMARKS.HTML file saved on the PC's desktop.
8) I then re-added all my favorite Firefox add-ons by clicking on Add-ons under the Firefox Tools menu and then clicking on the Get Add-ons command. I then searched for all the old add-ons I wanted to re-add to Firefox using the Microsoft Word document on the PC's desktop saved with the screen shot of all the old Firefox add-ons on my system by I uninstalled Firefox 4.0.
9) I then opened one of the old eBay auction page files saved on my hard drive under the eBay default file name "eBayISAPI.dll.htm". The file opened perfectly with NO missing sections and no missing original eBay auction listing photo! the file looked exactly like it did as if I was logged into eBay and looking at the original ended auction.
10) I then opened Hotmail in Firefox and received NO "update your browser" message! I was able to open all my old emails and write and send new emails (with all my Contacts being automatically detected when I went to type in the email address of the person I was sending the new email to)!
In summary, you need to uninstall Firefox 4.0 being sure to click on the "Remove my Firefox personal data and customizations" box during the uninstall process. Be sure to save/export all your old bookmarks before the uninstall process and make a note of all your old add-ons. Then reinstall whatever version of Firefox you are comfortable with. Apparently, my Firefox customizations had become corrupted at some point; removing the Firefox customizations during the uninstall process allowed any future Firefox version installed on my PC to start over with a clean slate (these corrupted settings would show up in whatever version of Firefox I had installed on my PC so removing them during the uninstall process was the key to solving all my Firefox bugs). I hope my suggestions help to solve your problem and good luck!

OSX Driver for Mitsumi Combo Drive?

I bought a Mitsumi DW-7801TE DVDRW/CDRW and put it into a external USB case. It works for simple things like reading CDs, commercial DVDs and burning CDr's with Toast, but will not recognize blank DVDr's (finder pops up and says the drive is not supported) and will freeze up and crash osx completely on occasion when importing to iTunes. Are there any updates or drivers i could install? thanks.

Alex,
Welcome to the Discussions.
If this behavior is intermittent, I would think it is a hardware problem.
Can you return functionality to the drive by removing the optical drive, then reinserting it while the 'book is running? These media bay devices are hot-swappable.
Or can you return functionality by sleeping the 'book, then waking?
I cannot recall if the 820E needs the "solder-fix" for full functionality. Will the drive boot a CD by pressing the 'c' key? Does the powerbook freeze when waking from sleep? These are two symptoms of an optical drive that is set to slave or cable-select.

Driver for emagic mt4 and emi6/2

hello, can't use my emagic 6/2 nor mt4 anymore on macbookpro with garageband nor logic pro. no drivers to find anymore... emagic.de is gone and in support 'emagic' is even not recognized... anyone got a solution?
tanx, regards, Lucaz

Hello everybody,
I had the same problem, and by hangin around this forum, I read somebody claiming that he had universal binaries into the EmagicA26A62mFirmwareLoader drawer located in his /Library/StartupItems.
Well... a big thanks to him because, effectively, these "Emagic" universal binaries drivers do really exist.
You'll find them on the Apple Logic Studio 8 install disk, into the "Package" directory.
The only little trick is to do the installation manually : extract the drawers by hand and copy them into the system directories, because the installer won't be willing to do its job...
And you'll even get the Preference Panel by the way!
Regards,
Fred
P.S. I'm happy by now

Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?

Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly. Is there a new driver for this ? I had a long chat with Samusng help desk that was totally inconclusive. Trying to re-install the printer I was told that there is no driver currently available. HELP !

You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X

Transferring hard drive files to external hard drive for backup have old tiger osx 10.4

how do I copy and transfer hard drive to external hard drive for backup of everything?

You can clone the entire drive to the external, provided you have more space available on the external drive than the total of your used filespace on the main drive.
Carbon Copy Cloner will perform the clone for you.
Matt

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

HP Laserjet 4 printer driver for mac osx 10.8.5

Anybody know of a mac osx 10.8.5 printer driver for a HP Laserjet 4?

Yeah, looked at this list earlier - they've got v. 19.8 for a Laserjet 4 Plus but mine is a plain Laserjet 4 so I doubt it would work. I used a Gutenprint driver v. 5.2.3 with Leopard that worked OK. Mountain Lion doesn't seem to like it as much...

Driver for HP DesignJet 800ps and OSX 10.8?

We have just purchased an iMac with OSX 10.8.2 and have since found that HP do not have a driver for the HP DesignJet 800ps(24in) plotter.
Further, the available generic driver within the OS does not support A1 or A2 paper size. This sort of defeats the purpose of a large format plotter . . . .
We have tried to install HPs OS10.7 driver as well as copying the driver from an older machine to the systems library on the 10.8 machine but each with no success.
Does anyone have any similar experiences, solutions or suggestions.
Thanks

Thanks for suggesting that, PAHU.
We just upgraded my old G5 to a new Intel and so, of course, I found myself hunting for a solution to the lack of DJ800 support.
My 42" DJ800 not only happily accepted the 42" 500 driver, but the driver even recognized and presented for use all of the custom sheet sizes that came from the old computer when I transferred my account info to the new one!
Hoo-HAH!
(Now, if only you could fix the "no-scroll-bar-arrows" thing...! <gr>)

Need to download Mac driver (OSX Mavericks) for LaserJet P1005

I am visiting a home that has a HP LaserJet P1005. I need to install the driver on my MacBook Pro Retina using OSX (the latest version: Mavericks). The owner of the printer has an install disk for the driver but these new MacBook Pros no longer have an internal optical drive. So I need to download the driver from the internet. The printer is now out of warranty, not that it should matter. The HP site says to get the driver from Apple using Software Update but Apple does not have it. The HP site says if Apple does not have the driver that the older driver on your computer will work - but I don't have that. So I have not been able to find any support post that helps me. I tried calling the 800 number and was on hold waiting for half an hour before I gave up. Please help! I need to print some documents in the next few days before year end. Thanks.
This question was solved.
View Solution.

Hi,
Restart your Mac, then plug the USB and try running Software Update again.
if the same persists install the dollowing package prior adding the printer under Pritners & Scanners:
http://support.apple.com/kb/dl907
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Please help I need driver for HP2540 for Mac OSX 10.5.8

Hi There
I just purchased the HP 2540 deskjet and tried to install drivers but it seems that the CD only supports OSX 10.6 and up??? I cannot get printer to print anything so can anyone send me a link to the correct driver for me for OSX 10.5 or is there just no driver available?
Many Thanks in advance if you can help me!

Sorry, but 10.5 has been officially unsupported by both Apple and HP for over a year, maybe two (I lost track).
You could try to substitute another driver from another HP model, but its a guessing game.
Update your driver set here: http://support.apple.com/downloads/HP_Printer_Driver_1_1_1 Restart your Mac after you install this.
It may be time to move on from 10.5.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

External Drive For Windows And OSX

Hello!
I'm using an external USB/FW drive for back up. It's formatted as "OSX Extended".
1) If I copy the data off this drive, what format would I need to re-format it in, so as to be able to back up from both OSX and Windows?
2) Will I be able to reload the first set of data, once I re-format it in the other format?
Thanx!

I don't recall either of those being mentioned in the OP's question, Niel. Only "backup" which does not necessarily mean Time Machine.
You might mention how much it will cost to buy MacDrive: Standard is $50 and Pro is $70.00.
BTW, I know you can't use FAT for Time Machine nor bootable backups. But FAT is not limited for use as a backup drive using other utilities that haven't the limitations or reliability issues of Time Machine.

HT2801 Can I use a USB external DVD drive for mac pc for a ibook g4 to install tiger

Wondering if I can use a externl disc drive for mac pc for ibook g4

Many PPC Macs won't boot from USB drives in OSX, but many can be made to...
http://hints.macworld.com/article.php?story=20060301112336384
Works with USB1.1 also, but really slow.

Printer Driver for HP Photosmart 7520 for Mac OS X 10.4 Tiger and 10.3 and 10.5

I just purchased a new HP Photosmart 7520 printer. One of my Macs at home is an iMac G5 that is running Mac OS X 10.4 Tiger. It connects to the HP printer via Wi-Fi. HP does not provide drivers for Mac OS 10.4 for the Photosmart 7520 printer. I tried all sorts of old HP drivers and finally found one that worked, so I figured I would post here to help out anyone else who is trying to solve the same problem. The driver download you need is the OS 10.4 driver for the Photosmart C7250 All-In-One printer. Here is the link to the download page:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55650-2 &cc=us&dlc=en&lc=en&os=219&product=3382185&sw_lang=
After downloading and installing the drivers, I ran the HP Printer Setup Utility. It was not able to detect my printer. I had to go to System Preferences on my Mac and add the printer manually in the Print & Fax control panel. The Print & Fax control panel was not able to auto-select the correct driver to use, so I selected "HP" from the "Print Using" drop-down list, and then selected "HP Photosmart D7400 Series" from the "Model" list. That worked for me. Good luck!
According to the driver download page, this driver will work for Mac OS X v10.3.9, v10.4 and v10.5

Thank you very much, I just bought this printer without paying attention to the compatibility of my Imac. Thanks to you, I just install it without too much difficulty. Thank you again.
Merci beaucoup, je viens d'acheter cette imprimante sans faire attention à la compatibilité de mon Imac. Grace à vous, je viens de l'installer sans trop de difficulté. Encore merci.

Tiger OSX Driver for eMagic AMT-8 - AMT no longer seen in AudioMidi

Similar Messages

Maybe you are looking for