Tiger's external HDD not showing up in leopard

Hi, I just got myself a new MacBook Pro and it has Leopard on it. I also have my mac mini running tiger. The mac mini has an external harddrive which I need to access from the laptop.
I can see all normal mounted drives from leopard, but the external hard drive will not show up. I desperately need files off it and I have no idea how to solve this.
Thanks
-Rob

Okay -- some kind of progress.
If i share the external hdd using sharepoints i can access it through smb://{compname}/hdd
yet it refuses to show up automatically under the shared folder in leopard's finder.
I have a feeling its something minute and silly -- but I just can't figure it out, any help would be appreciated

Similar Messages

  • External HDD not showing up in finder through airport extreme

    I have a 2011 Airport Extreme that I'm attatching an external HDD via USB that's been formatted with a Mac OS Extended (Journaled) partition.
    I can see my drive in the AirPort Utility under Disks > Disks, I've enabled File Sharing, but I can't see it in the finder.
    Any Ideas?
    Thanks!

    The USB port on the AirPort Exreme is under powered. For that reason, you almost always have to use a powered USB hub with an attached hard drive....even if the hard drive has its own power supply.
    Be sure to restart your entire network after you install the powered USB hub so that the disk will be recognized.

  • External HDDs not showing up on Mac mini

    Hi there,
    I have an old Mac mini with several external HDs: one Drobo drive and three other drives of various sizes. All are connected to the computer via USB: two directly, and two plugged into the other drives.
    Recently, a couple of the drives stopped appearing on the desktop. They are turned on, and I haven't changed anything on the system, but the drives in question don't show up.
    Any suggestions?
    Thanks!

    Hi Tor Lundgren-
    Is it always the same two drives that stop responding?
    Are you able to connect all of them directly to the Mac via a USB hub just to see if you can narrow things down?
    This document may also be helpful: USB Device Troubleshooting
    Luck-
    -DP

  • External Hdd not detected

    Hi guys,
    I've got this issue where my Macbook Air cannot detect my external hdd (not showing up on disk utility), where as my Mac Mini can. I assume it's a software issue. Both are running OSX Mavericks (Latest edition) and there is nothing wrong with my USB port in the Air (detects my mouse, flash drive etc.).
    The hdds' LED no longer flashes when plugged in the Air but functions fine when plugged in the Mac Mini.
    Is there any manual reset command (through Terminal) or setting in the Macbook Air without having to factory reset?
    Thanks in advance for your help!

    If the hard drive is bus powered (it doesn't have an independent power supply) the MBA may not be supplying enough power to the drive. This isn't an uncommon problem. I have a cheap external at work with this problem which I solved by plugging it into a powered USB hub instead of directly into the computer. Had that not worked I'd have tried finding an external power supply for the drive - or junking the enclosure.

  • USB External drive not showing in Finder, or on Desktop

    I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
    The first one shows everywhere, on the desktop, in finder and in Disk Utility.
    The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
    Any suggestions.

    Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

  • LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    Hi ASMX,
    Welcome to the HP forum!
    Your HP Probook is a commercial product.  I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial Forum/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    In the mean time here is a link to your homepage.HP ProBook 6560b Notebook PC Support
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • [SOLVED] External HDD not mounting at boot

    So, I've got this USB external HDD which won't mount at boot time. I set it in /etc/fstab using its UUID and it works immediately after boot if I do
    sudo mount -a
    I had it before on a different machine, running Arch too, and never had this problem. How can I see what's going on at boot time? I usualy just start the computer remotely (wake on lan).
    Last edited by RaisedFist (2010-10-21 11:22:46)

    Couldn't it be caused by the external HDD not being ready yet when the system boot? Nowadays I rarely encounter these issues, but some years ago even certain internally connected drive would need a delay to get ready for boot. If so settings in BIOS has to be adjusted.
    Just a quick guess.

  • New HDD not showing in disk utility

    Help please!
    i can up on a broken G5 i have replaced the HDD. now i am trying to install tiger. but the new internal HDD is not showing up in disk utility.
    i plugged my passport in and it popped right up.
    some one please let me know what you think.

    Well, having a had hard drive connected may cause a grey screen (if the system cannot successfully perform a check of connected devices). Not sure about the fan.
    If you have not done so yet, be sure to try resetting PRAM
    http://support.apple.com/kb/HT1379
    If that does not help, you can also try resetting the SMU (power management).
    http://support.apple.com/kb/HT1767
    Follow the procedure precisely.
    It is also possible that the old drive was not bad and your iMac has some other problem. Did you ever test the previous drive on another Mac (or connected externally) to confirm it was faulty? That +other problem+ may be what you are experiencing now.
    Also, I asked this previously but, are you able to start up the iMac using the optical drive, with a Mac OS X installation disc in there?

  • External HDD not recognized by Retina MacBook Pro

    I recently bought this external HDD (http://www.amazon.com/Seagate-Backup-Desktop-External-STCA1000100/dp/B00829THK0/ ref=dp_ob_title_ce) to backup with my new retina macbook pro. It uses usb 3.0 and if I am not mistaken, the usb ports on the new macbook pro are usb 3.0.
    I plug the hard drive into the wall and then into my computer. It spins and there is a light on, so I know it is powered on. Nothing shows up in finder and nothing shows up in disk utility. The box says it is compatible with macs and it works with other Macs that are not my own.
    Has anyoher else had this problem? Do all usb 3.0 periphrals work with the new macbook, or only Apple's?
    Please help

    I had some luck with these terminal commands. The drive mounted and showed the right speed in System Profiler. I recommend copying and pasting the commands into the terminal if you're not comfortable there.
    sudo mv /System/Library/Extensions/PXHCD.kext /System/Library/Extensions/PXHCD.kext.not
    sudo touch /System/Library/Extensions
    Reboot the system after running these commands.
    I had migrated from my previous machine and had this problem. I restored it, and it worked fine. I put everything back on and started isolating. This extension seems to be from when I had installed LaCie drivers on the old machine.

  • External HDD not recognized after unsafe removal

    Dear,
    Yesterday i bought my first macbook pro. Before i bought that macbook i saved all my data from my windows laptop on my external USB HDD.
    Today i connected the external hdd trough USB. the macbook recognized it immediatly but i accidentally removed the usb cable from the disk, so it dissappered.
    Now when i connect the usb drive my macbook freezes for a period. After the freeze i don't see the drive.
    If i remove the usb cable during the free the macbook comes back alive.
    Since i am a newbie on mac i need your help !
    cheers

    Welcome to Mac-land.
    This wouldn't happen to be a WD external drive, would it?
    Is there some utility on your Windows laptop that you can use to repair the external drive? Something equivalent to Disk Utility on a Mac? I'm not a Windows guy so I don't know.
    If the data is still on your Windows laptop, then maybe your Windows machine can erase the drive enough for you to get it to mount on your Mac.
    Another option might be to see if your Mac will boot into recovery mode (restart and hold down ⌘R until you see the Apple logo), and then maybe Disk Utility (you'll find it when you boot into Recovery Mode) would be able to see the external drive and either repair it or reformat (erase) it.
    Occasionally Techtool Pro 7 will be able to repair something that Disk Utility can't. Techtool is a good thing to have; it's the only third party maintenance/repair utility that you need. Techtool installs a repair partition (the eDrive) on your internal hard drive, similar to the recovery partition that is already there with Mavericks. So you might be able to boot into the eDrive and then see the external drive and either repair it or format (erase) it so it will show up under normal boot conditions on your Mac.
    It seems less likely, but perhaps your external drive has chosen this time to die. If you can't get it to mount/erase/repair with either machine then that's probably what's going on.
    Less likely than that, but still possible, is that the problem is with the external is in the enclosure itself, and not in the drive within, so if you can't get it to work any other way, it's worth a shot to remove the drive and put it in a different enclosure and see if it will work.

  • External HDD not recognized after Finder Crash?

    Hi guys. I was loading a file in photoshop from my external hard drive. It was a big file 1.5gb. After 10 minutes of waiting i decided to force quit Photoshop as it was frozen at the loading bar. Soon after the finder stopped working too, so i restarted my mac.
    Now everthing work fine but my external hdd its not recognised anymore. It works, as i can see the light on, but doesn't show anywhere on my mac.
    I have tried on a pc as well and the same result.
    How can I get my files back or make the hdd working again?
    Any help would be much appreciated
    Cris

    hey loner, actually its shown on About This Mac -> More Info -> System Report-> usb
    sorry i didn't see it properly before. What does that mean? have i got a chance to recover it?
    here is the screen shot

  • External HDD not recognized

    I have a 1tb external hdd that i can't seem to find, on my desktop, in finder, in disk utilities or even the system profiler. it's got my 20gb itunes library and about 150 gigs worth of movies on it so i'd like to try to get it working again, without reformatting it if it's possible. It doesn't show up on either my ibook or my mac mini and it won't show up on my friend's windows laptop either, although when i did put the usb into the windows computer something popped up that said it was installing drivers and that it could be used. when i went to look for it it was nowhere to be found. the hdd is a smart drive and has a 100gb windows formatted partition, and a 800 gb mac partition and i don't use either for timemachine. it's been working fine since i got it, not even a hiccup and there have been no odd loud or unusual noises recently. and when i plug it into any computer it starts to spin up as it normally does. i've tried the usual check wires, turn off/on, restart all computers, nada. what is really distressing is the fact that the system profiler doesn't even recognize it so even if i wanted to i couldn't reformat it.
    i would appreciate any insight. thanks.
    Message was edited by: CortB

    sorry just edited the original message, no i cannot see it in system profiler, on either mac, and i can't see it in device manager on the windows.

  • Fire Wire HDD not showing in Desktop

    Hi, I am using a maxtor 300GB Firewire HDD, Suddenly it is not showing in my Desk Top, but it is showing in Disk Utility. I am not able to use the disk. I already have valuble data in it. I am only able to eject it from disk utility.
    I also want some info on access options on external Hdd like read/write/ no accesses. and locking it.
    Power BOOK G4   Mac OS X (10.4.8)   G5

    1. Try the instructions in this FAQ.
    2. The read and write options control what accounts are able to read and write a specific file or folder; a disk must allow all accounts to read it if it will appear on the desktop of any non-root account. If you want to stop people from accessing the drive, change the permissions on it so that only your account can write to it, and that only your account has any access to the folders inside. Anyone with an administrator password to the computer or physical access to the drive can defeat file permissions used to secure data on it; in this situation, you should use the Disk Utility in the /Applications/Utilities/ folder to create encrypted disk images and store them on the drive.
    (19683)

  • External Drives not showing up in finder

    I have two external hard drives that will not show up in my finder as if it is not activated in my Sidebar or Desktop (even though it is). They don't even show up in my Macintosh HD directory. My other external drives work fine and show up everywhere they are supposed to. This is happening on both my computer and another Intel 8-core, so I am assuming it has something to do with the external drives. They do, however, operate as expected when accessed through the network and when using spotlight.

    Sounds like the Invisible bit got set on those drives. Take a look at the article I wrote on the problem as it first appeared in Tiger:
    http://www.pinkmutant.com/articles/invisible.html
    There is a new wrinkle to this old bug in Leopard, where the invisible bit is sometimes immediately being reset back to invisible. So far there is no solution to that. See this discussion:
    http://discussions.apple.com/message.jspa?messageID=5751668
    If you are lucky the reset described in the first article will work for you.
    Francine
    Francine
    Schwieder

  • External HDD Not Appearing

    Hi All,
    I'm trying to connect a Windows HDD to my Mac via a USB - SATA cable as the windows laptop has died. The disk has booted fine but does not show up in finder or Disk Utility. Any ideas why its not appearing? Could it be the adapter I'm using as it is from another external HDD I own.

    Possibly. Do you have another cable you can test with?

Maybe you are looking for

  • Period is locked for new data [Message 131-107]

    Hi all, One of my client was faced this problem "Period is locked for new data [Message 131-107]" when they do Period-End-Closing for Year 2008 in SAP Business One 2007A Patch 42. Can anyone help me? Thank you. Best regards, danny

  • Question for Outgoing Payment Drafts Report

    HI:       Experts.I use a non-superuser to login SBO, I couldn't choose user for payment drafts report, but I could choose user for Document Drafts.  How counld I choose a user for Payment drafts report as a non-superuser? Regards

  • Flex 2 configuration for Struts application

    Hello everyone, Good afternoon. I have some questions regarding the Flex 2 and Struts. I use struts for long time already but just touch the Flex 2 since last week. As I know, we can use Flex 2 to build our front end and Struts for the Control and th

  • 1043 error when trying to use dynamic events on RT system

    Hello, I am trying to define some dynamic events as specified it the LabView help for RT targets. But when trying to run the vi I get the 1043 error. What am I doing wrong? Thank you, Przemek Attachments: RT test.vi ‏17 KB

  • What is interface name of Sun fire X4100?

    Dear all, I installed Solaris 10 on x64 AMD (Sun fire X4100). I want to config TCP/IP but I do not know interface name to create file /etc/hostname.interface_name. How can I find interface name of Sun fire X4100? Thanks.