Tiger Server: I can´t install on second HD

Hello,
I have a PM G5 with two internal HD, one with leopard client and other one empty.
I can´t install Tiger Server on second HD because tiger server can´t startup on this hd.
Can anybody help me?
thanks.

You may need to reformat the hard drive using the Apple Partition Map (APM) partition format.
PowerPC-based servers can only boot from APM disks (not GPT-based disks as used in Intel machines).
In addition to the partition format, the disk will need to be formatted as HFS+ (Extended), and optionally journaled.

Similar Messages

Satellite A300-15M - Can I install a second HDD?

Hi there.
I own a SatelliteA300-15M. I bought the laptop 2 years ago. I have already 250GB hard drive which came with the laptop. Recently I got my laptop serviced from local shop. I noticed that it has an additional slot for another hard drive. I saw a post that some of the A300/A305 laptops have the space for second hard drive but not the connectors.
If anyone owns A300-15M can they please tell me if i can install a second internal hard drive in my model? Is there a sure way to find if I can really install a second hard drive?

Hello
> but not the connectors.
So the case is claer: If you dont have a second SATA connector, you cant install a second HDD.
Check also the forum regarding such questions. The point is that one notebook series (e. g. Satellite A300) is always equipped with the same case but the hardware is different. So not all models have the same features. ;)

Satellite X200-245 can i install a second HDD

on satellite X200-245 : can i install a second hard drive ?
is it possible ?
There is a place for it but no sata connection on the mother board where can i find this connector

No you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
And No, its not possible to upgrade the mobo with such connector.
The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
Your X200 doesnt support 2 HDD

Can you install a second hard drive on a Touchsmart320-1130 PC?

This question was solved.
View Solution.

Here are the specs for your HP TouchSmart 320-1130a Desktop Computer. No, you can't install a second hard drive in this computer. The HP TouchSmart and All-in-One computers have more in common with laptops than they do with desktops.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can I install a second copy of photoshop elements 2.0 on my partners laptop? and can she use it also?

Can I install a second copy of photoshop elements 2.0 on my partners laptop? and can she use it also?

Wow, Thanks for the answer,
As some software has multiple user limitations, i wanted to check that out, in case your only meant to install on only one computer,
so its okay for my partner to use it to?
And also, is it alright to make money from using photoshop elements 2.0?
Do you recommend any free up dates to elements 2.0?
Thanks

I want to get my kids an iPod touch... can I install a second version of iTunes on my computer to sync with the new iPod?

I want to get my kids an iPod touch... can I install a second version of iTunes on my computer to sync with the new iPod?

There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
How to use multiple iPods, iPads, or iPhones with one computer

How can I install a second version without affecting the first?

How can I install a second version of FF without affecting my original installation?

You can install multiple Firefox versions via a custom install in different installation folders and only use the older Firefox version when you really need it.<br />
Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/
Make sure not to start Firefox after the installation has finished.<br />
Create a new profile exclusively for each Firefox version.<br />
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See also:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Unable to install SSL Certificate - ADMIN4118: Only one server certificate can be installed at a time

Hi,
We are trying to install SSL certificate (Verisign Class 3) on iPlanet Web Server (version 7). However, at the final step we are getting the error "ADMIN4118: Only one server certificate can be installed at a time"
We are following the below steps,
Under "Server Certificates" tab,
     -> Click on "Install" button.
     -> On "Select Configuration" click on "Next" button.
     -> On "Select Tokens and Passwords", select default token as "internal" and click on "Next" button.
     -> On "Enter Certificate Data", select option as "Certficate File" and give path to the certificate file which is having .p7b extension
     -> On "Certificate Details" we are getting warning as "Duplicate Server Details Found" and it's by default using the existing certificate's nickname.
     -> On "Review" page after clicking "Finish" button, an error is displayed saying "ADMIN4118: Only one certificate server can be installed at a time"
There are multiple sub-domains availble and the new certificate we want to install contains one more sub-domain.
So, say currently the subdomains present are,
1.abc.com
2.abc.com
so on...
and now we are trying to install a SSL certificate having one more subdomain say 10.abc.com.
Please let us know if you have solution to this problem.
Thanks,
Rajesh

Hi Rajesh,
That error is most commonly seen when you are trying to install a certificate chain into the Web Server.
The chain should be installed using the "Certificate Authorities" tab per the following steps:
1) Login to the Admin Console.
2) Click Edit Configuration from Common Tasks > Configuration Tasks.
3) Click the Certificates > Certificate Authorities tab from the Configurations page.
4) Click the Install... tab from the Certificate Authorities (CAs) page.
An Install CA Certificate Wizard opens. The wizard guides you through the settings available for installing a Certificate Chain. Select Certificate Chain when prompted for Certificate Type.
You should then see the CA and intermediate certificate(s) listed in the security database.
If you have access to MOS, more details can be found in the MOS KM Note:
   Oracle iPlanet Web Server - 'ADMIN4118: Only one server certificate can be installed at a time' When Installing Certificate Chain (Doc ID 1925025.1)
regards
Tracey

Unable to Boot from Mac OS Tiger Server 10.4.0 Install CD

Hi,
I just picked up a Powermac G3 and am trying to install Tiger Server 10.4.0 from the install CD. The G3 won't boot from the CD (holding the c key at startup) and when I try to install from Open Firmware (using boot cd), I get the following message:
MAC PARTS: Load (noninterposed) not supported load-size0=adler32=1.
I'm assuming the above is bad news!
Other than booting, the CD appears to work fine. Also, the firmware is all up to date. The current version of OS on the G3 is 9.2.2 but unfortunately, I do not have any install disks for this (hence why I want to try and upgrade and install my legitimate server OS on it).
Other than that, all I can say is that it is a 300Mhz G3 Blue and White with what appears to be a 10gb hard drive. Other info from System Profiler is:
Ram: 256mb
Machine ID: 406
Mac OS Rom 9.2.1
I assume that Tiger would be a little bit choosy about some of the older hardware, but nevertheless would be grateful for any assistance as to whether this can be installed on this Powermac.
Thanks for your assistance.
Steve
PowerMac G3, PowerBook G4, 20" Intel iMac Mac OS X (10.4.7)

Did some research and it appears that puting Tiger server on a B&W is a lot more difficult than puting Tiger (workstation?) on a B&W. (i.e. You're not the only one with this problem.) The offered solutions have been to take your hard drive out and install server on it from another machine - which you can't do with the machines you have... unless you swap the drive out of your iMac.... but that's up to you. I wouldn't risk it.
The other option is to spring for a DVD drive that will work in your B&W and boot from the DVD and install that way. You can pick them up for about $50. (I know that's about what your B&W is worth, but that's life...) If you go this route, make sure you get a DVD that Apple has written the drivers for (Pioneer, NEC, etc. ) and built into the OS installer. My personal drive is an NEC ND-3540A. Picked it up at NewEgg.com. That's what I had to do to get Tiger on mine.
B&W 450 Mac OS X (10.4.7) 512 MB RAM - SuperDrive

Can I install a SECOND HARD DRIVE (ssd) on my x220i

For some reason I'm having problems finding the answer to this. I would like to install an ssd, but I would like to keep the existing hard drive for space. Is the a way to install a second hard drive (an ssd) into the x220i?
Thanks for any input!

You can install an SSD drive in the mSATA card slot.
See this: http://forums.storagereview.com/index.php/topic/29946-msata-ssd-update-my-thinkpad-x220i/

Can I install a second card and have both work?

I am a Ham Radio operator. I have a Pavilion HPe desktop running windows 7 64. I would like to install a second sound card that would be used for Ham Radio digital modes and I would leave the onboard sound as default to run normal play back functions. I tried this with a Sound Blaster XFI Extreme PCIe card (SB1040). I got the card to work but it uninstalled the onboard card or the system would not recognize it. Is it possible to have two sound devices and they both work? I did this with an XP system no problem.
Thanks
Dave

based on some quick analysis you can use specific software to determine what you want to use as output. so check the software with the ham radio software to use whatever card is greyed out in the options on windows 7 and use that. What you want to do IS possible. we just need to figure out how to get it done.
so in theory, windows could be onboard, and your ham radio software program could use the dedicated card, you will just need to play with options. see if that helps
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

Satellite P205-S6337 - Can I install another second HDD?

Totally need another HDD for music/other files.
Really don't want to buy a dock such as.. http://www.thinkgeek.com/computing/drives/a7ea/.
Is it possible that I can install a second SATA HD on this notebook?
I'm not too good with working with notebooks really.
Anyone have any instructions on how i would do this?
And how to install another GB of ram?
I have both on my old notebook.

Hi
Did you check your user manual?
Usually the user manual provides already such infos.
Im not quite sure if an second HDD could be possible. Check bottom of the unit.
Some series are equipped with a second HDD bay. You could try to remove the plastic cover which secures such HDD bay and could check if there are some HDD connectors which would make the second HD upgrade possible.
It seems that this notebook was also equipped with 2GB RAM So it could be possible to upgrade the RAM up to 4GB. But in my opinion its really not necessary to have 4GB RAM inside if you are using the Windows 32bit OS.
The point is that your 32bit OS can use max 3.2GB RAM due to the 32bit limitation.
So if you want to upgrade the RAM then I would recommend taking 1x 1GB and 1x 2GB RAM module.
Regards

Can not install a second product using Adobe .msi packages

Hi,
We install our Adobe products using .MSI packages (made with the Adobe CCPLaucher tool)
The first package is installed correctly, but the second always fails...
Does anyone have a solution to install multiple applications using Adobe MSI packages?
Thank you

Hi Ashish,
I found the PDApp.log for the second .MSI package that doesn't work but i don't understood why...
The MSI package works when I install it for the first time but if I try to install it after another one, it doesn't work anymore.
I have the problem with all the MSI Adobe's package, I can only install one but impossible to install another.
Here below the PAApp.log if you can indicate me what's the problem...thank you very much !
Thanks

Can i install a second hard drive for back up/storage

i have 1td already and could exchange my mac mini for the server editions but im told its much more complicated
i just want to have enough drive space, is it possible to get another hard drive and have it in the mac mini for back up / storage
or would i simply be best to get a USB hub with an external drive ?

Yes, you can add a 2nd drive. You can review this iFixit.com page for instructions. You would need to purchase their data doubler kit which would include all the parts you need to add it. All you need to remember is to follow their instructions and TAKE YOUR TIME. There are several little screws and plugs that you have to be careful with. Otherwise, it's a breeze to take the Mini apart and add a 2nd drive.
All the Mac Mini Server has extra is an additional 1TB hard drive and the OS X Server app. If you want OS X Server, you can purchase it on the App Store for $19.99 US.

Can't install the second DVD applications - no set up icon

I have Creative Suites CS4 for Mac. First DVD installed perfectly. But the second DVD only has two folders, Extensions and Payloads, and no set up icon/function. I have contacted technical support and their solution was to send me a whole new set of DVDs, but it's still the same problem. Their other solutions did not work either. Help! How do I install my second set of applications on the Mac without the set-up icon?

I have a MacBook MacOSX 10.5.8 - 2 GB memory.
I put in the first DVD and clicked setup for easy install. The applications that were listed on that DVD (Dreamweaver, Fireworks, Acrobat) installed. When it finished installing, it said Thanks and ejected the disk. But I was still missing InDesign, Photoshop, Illustrator, and Flash. I then put in the second DVD. Nothing happened.
I called technical suppoirt and they were no help both times.
Thanks for any help.

Tiger Server: I can´t install on second HD

Similar Messages

Maybe you are looking for