Tiger Upgrade interfering with final cut

Ok I just upgraded to tiger today from panther and I use final cut express 2 to edit. I then tried to capture something from my camcorder which is a Canon GL2 and my computer doesn't even recognize it anymore. And when I try to capture footage anyway even after clicking continue to the message that there's no External A/V detected, final cut then closes out immediately. I'm pretty frustrated. Anyone have this problem?

A couple of suggestions that might help:-
1. Have your camera plugged in and switched on BEFORE you open FCE.
2. Select View>Video Out>Refresh Video Devices. (I assume you have this option on FCE 2?)
Ian
A few more ideas:-
Trash the Preferences, all 3 of them:-
http://docs.info.apple.com/article.html?artnum=93690
If eventually you get no useful help, consider re-installing FCE after completely uninstalling it as per this article:-
http://docs.info.apple.com/article.html?artnum=93688
Also try plugging and unplugging the FW cable from your Mac.

Similar Messages

After upgrading problem with Final Cut Pro 7

Hi, I upgraded and when I open FCP it takes about 4 to 5 minutes to open. I've trashed all the prefs files but no help. Any thoughts about this or how I can figure out what is going on? Every other app in the suite opens quickly
Thanks for any suggestions
Derek

I just upgraded to FCP 7.0 today and will be upgrading to Snow Leopard later this afternoon, but wanted to check FCP 7 before and after.
My experience was the last project I did came up in less than 60 secs, the video is @ 15 mins long and is Standard Dev. The start of the FCP 7 took less then 30 secs to start.
Regarding your long start up time, as the application is starting, the FCP window shows whats its doing while starting.
Is there any places where it stops for a long time, if so, a reply with what is the last update may help.
Also check you console log, from utilities to see if its reports anything during this time.
Last but not least, are you connected to the internet ? I was in my case, but I have seen in the past with other apple apps that send some data to Apple while starting the application up. If Im not connected to the internet, the startup times can be as long as you state.
Good luck

Is my issue with Final Cut Pro or my Macbook pro?

I'm going to try to be as thorough as possible in explaining my situation because I can't figure this problem out and it's exhausting me. I have an early 2011 macbook pro with the 2.2 ghz processor. I upgraded to 16gb of ram almost a year ago. I've been using Final Cut Pro 7 on this computer for several years now without issue and have made no setting changes that would prompt my problems. A few months ago my battery decided to stop holding a charge and now just registers 0%. Around the same time, while editing a short video my computer began behaving like it was overheating. It would crash, restart, crash and then restart again. After I did a disk and permissions repair it began to work normally again and I haven't had any more crashing issues. Around this period of time I began noticing that when my computer turns on it doesn't register the correct time and date. Given a few moments it corrects itself, but for some strange reason it was doing that every time.
Anyway, around that time I tried to upgrade to Mavericks and experienced an issue during installation because my hard drive was apparently damaged in some way and the installation couldn't be completed. I restored my previous OS and tried to carry on as I was with the damaged hard drive for as long as I could. I was still able to do everything I needed on the computer. I could still edit videos with Final Cut. I could still browse the internet. I could still stream Netflix.
About a month ago Final Cut stopped working. I could open the program, start a new project and import media files, but when I dragged them into the timeline, they just stuttered (audio would play but video would lag and then jump several frames then lag and jump frames). At the time I assumed this was because my hard drive finally gave up, but I was still able to do other functions like browse the internet and stream basketball games with nba league pass (granted they weren't crisp hd - on a side note, netflix was also behaving oddly. when I would browse through my list, it wouldn't stop scrolling when I moved the mouse away.) so I assumed the hard drive was my issue.
I just replaced my hard drive with an ssd (crucial m500) and upgraded to mavericks (10.9.1) and now I am having the same issues. Netflix behaves fine. Basketball games stream fine. My battery is still dead (obviously that wasn't going to change). I get the wrong date and time for a minute, but I'm thinking that's battery related now. But Final Cut still lags to the point where I can't use it. Video clips also won't render. I thought this might be an issue with the Final Cut program so I uninstalled it and reinstalled it, but it still did the same thing. Assuming I hadn't correctly/completely uninstalled it, I downloaded HitFilm 2 (an editing program that had a free download promotion at the time), figuring using a different program, if i could edit video with it, then my issue is with Final Cut and not my computer. Unfortunaely, I'm having the same lagging issues with HitFilm as I was with Final Cut.
I'm at a loss as to what the problem is. Sorry if this was a rambling post, but I wanted to get as much of the background out there as possible, should it provides anyone with a clue as to what is the issue here. Does anyone have any idea what could be at fault here? I'm stumped.

Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.2 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 5 days 3:30:18
Disk Information:
          Crucial_CT480M500SSD1 disk0 : (480.1 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    SSD (disk0s2) /: 479.11 GB (235.88 GB free)
                    Recovery HD (disk0s3) <not mounted>: 784.2 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.bombich.ccc.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          WDQuickView
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          DivXBrowserPlugin: Version: 2.2 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          DivX 3rd-Party support link
          Flash Player 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          WFTPairing:          Version: - SDK 10.4 3rd-Party support link
                    /Applications/Canon Utilities/EOS Utility/WFTPairing.app
          Nisus Thesaurus:          Version: 1.1 - SDK 10.4 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 931.16 GB
                    Total number of backups: 2
                    Oldest backup: 2013-04-15 00:34:39 +0000
                    Last backup: 2014-01-22 03:55:49 +0000
                    Size of backup disk: Excellent
                              Backup size 931.16 GB > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               4%          WindowServer
               3%          EtreCheck
               0%          ps
               0%          aosnotifyd
Top Processes by Memory:
          180 MB          Safari
          164 MB          Finder
          164 MB          com.apple.IconServicesAgent
          115 MB          PluginProcess
          105 MB          com.apple.WebKit.WebContent
Virtual Memory Information:
          11.22 GB          Free RAM
          2.77 GB          Active RAM
          296 MB          Inactive RAM
          1.71 GB          Wired RAM
          782 MB          Page-ins
          0 B          Page-outs

Final Cut Express incompatibility with Final Cut Studio 2

I recently upgraded to FCS 2. I have several projects created with Final Cut Express HD 3.5.1. I can open all projects created with FCE in Final Cut Pro 6.0 without difficulty. The problem occurs when I "round trip" a clip from Final Cut Pro 6.0 to Soundtrack Pro to remove audio problems. When the edited audio file is returned to the Final Cut Pro project, the audio is out of sync. This only happens when the project was created with FCE HD and opened in Final Cut Pro 6.0. If I make a new project starting from scratch in FCP 6.0 , use the same media, and perform a similar "round trip", the problems dissappears. I would hate to recreate all projects in FCP 6.0. Any solutions?

chuckz33 wrote:
Frame Rate to 8000
Frame rate is fixed to 29.97 ot 25 in FCE. What do you plan with 8000 frames/second?
HD1920X1080 is a frame size, what is the CODEC used (like H.264,MPEG2, QT animation, etc)?
Michel Boisssonneault

Is Snow Leopard 10.6 compatible with Final Cut Studio 7?

Is Snow Leopard 10.6 compatible with Final Cut Studio 7?
Currently running 10.5.8 and pondering an upgrade. I have to go from snow leopard to lion, and I'm wondering what i'll applications I'll have to

It is Final Cut Studio 3 or Final Cut Pro 7 and yes it woarks fine in snow or lion

Is Quicktime Pro included with Final Cut Studio?

Wikipedia's article on Quicktime Pro says that a Quicktime Pro license comes with Final Cut Studio. Is that true?
I have OS X 10.5.8 and FCS 2, but I can't even tell if I have Quicktime Pro. I see Quicktime Player in my applications folder (version 7.6.6), but I don't see Quicktime Pro.
Is Wikipedia right that I got a QT Pro license with FCS? If so, how do I activate it?
If not, do I just purchase the upgrade from the Apple Store? How do I install/activate the upgrade it?
Thanks

I'd like to re-open this topic. I'm not sure that I have QT Pro either. I recently upgraded the OS to 10.6.4--which included a new QT Player [10.0 (114)]. None of the pro features are there--or the old preferences (or the QT System Prefs). I don't use QT Pro features much, and it's only been about a month since the upgrade, so I didn't notice until now. I used to have it. Did I miss something?
FCP 6.0.6

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

Need Help, crazy HDV Problem with Final Cut

Hi Guys, first thanks for looking my problem.
I have a new Macbook Pro 2,4Ghz with 4GB RAM and Leopard 10.5.4
So also I have Final Cut Studio 1 updated on 5.1.4.
My problem: As i captured HDV Material i saw in Quicktime, that there are many fragments, more terrible then hdv compression.In Final Cut 5 the same. So i was looking for an other Mac, so i've found an G5 also with Final Cut 5.1.4 and Tiger OS. But there i saw nothing, no fragments, all good(same material).
So i think its a problem with between macbook pro,leopard, hdv and final cut 5.1.4
Can anyone help me, im also able to give you a screenshot with the fragmets. There are very strong to see in the grey colors.
Thanks

http://www.bilder-space.de/show.php?file=Gqur6a5PA7NZW2K.jpg
here is a screen from my problem, thats nomal resulution ... HDV in Final Cut, look at the fragments left and right, thats not normal !
Message was edited by: jenderbender
Message was edited by: jenderbender

What is the best dvd burning program with a nice menu like idvd that works with Final cut pro

What is the best dvd burning program with a nice menu like idvd that works with Final cut pro, I am wanting to burn mainly wedding dvds but also sports and other things we used to use idvd but then upgraded our computers and now we dont have it. idvd was the only thing i could find that worked.
Thanks

There is no real substitute for iDVD.
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

M-AUDIO Fast Track Ultra with Final Cut 7

I have been using an M-Audio Fast Track Ultra device with Final Cut 6 and could listen to Quicktime 5.1 audio files in the timeline in full surround. Since I installed the Studio 3 upgrade with Final Cut 7 (same OSX version), this is not working anymore. I just have stereo output. When I start my backup version of Final Cut 6, it still work fine.
Any clue how to fix this in Final Cut 7 ?

Hi,
The 5.1 audio preset was already selected in the setting and each of the 6 audio tracks is assign to the proper speaker. It was the same set-up in the v6 but it was working which is not the case in the v7. There might be a new setting somewhere.
Thanks for trying.

ATY radeon x1900 not compatible with Final Cut Pro X ???

It looks like my ATY radeon x1900 Graphics card is not compatible with Final Cut Pro X and the new motion and compressor?
I have a Macpro 2 x 3Ghz quad core Intel Xeon with 16gb RAM
Any suggestion to which card I should Purchase?

There are several threads here and abroad that mention the installer will notice and approve the ATI 5770 in older mac pros.
I just now bought a 5770 from Apple's online store for my 2007 Mac Pro 2,1 so I'd have the compatibility if I ever decided to upgrade -- assuming at some point they'll run out of stock and not make any more.
Keep in mind the 5770 has 1 dual link DVI and 2 mini display ports so you might need to pick up necessary adapters depending on your monitors.
Hopefully FCPX will be usable in the near future and an upgrade will be pragmatic.
(I sure hope they don't pull this stunt with the next Logic upgrade.)
I may have a 1900XT for sale soon.

Can Motion be used with Final Cut Express?

I am needing to add a little more advanced graphics and I am wondering if I bought Motion, would it be able to work with final cut express HD or would I have to upgrade to the final cut studio pro suite?
Any suggestions or advice would be greatly appreciated.
Thanks!

Hi(Bonjour)!
Be careful with used copy, Motion 1 and 2 were sold as single product in the past, not from a editing suite like Final Cut Studio 2 or 3. There was an upgrade from Apple: Final Cut Studio 5.1 that gave the intel support for those applications included in studo bundle. So, used earlier version of Motion may be not usable on your intel mac without the FCS 5.1 upgrade.
The graphic processor card compatibility must be checked too.
I would go with a used copy of Adobe After effects, may be 6.5 or 7.
Michel Boissonneault

Does compressor 4 work with final cut pro 7?

does compressor 4 work with final cut pro 7?

Russ H wrote:
WHile I'm not 100% certain (this has come up before and It's not convenient to test), I believe that purchasing Compressor will also allow you add additional codecs to your QT library.
Russ
Yes, Compressor adds several codecs, which can also be used in FCE (decoding and encoding using QuickTime Conversion) and in QuickTime player. Most notably these are MPEG-2 and ProRes. The latter is an editing-friendly Intraframe-Codec useful for preprocessing stuff for importing clips to FCE, particularly if it has a different framerate from the FCE project.
I'm also still using FCE 3.5(*) and the "Export using Compressor" menu option remains grayed out, which is a pity, but the new codecs can still be used. I mostly use it to make stuff for DVDs, using my ancient and cumbersome iDVD.
(*) It really works on Lion, provided you have installed it on a previous Mac OS release and then migrated or upgraded to Lion: the installer is a PowerPC program, but the installed program is Universal and works fine and very stable. If you already have Lion, and no older (Snow) Leopard machine, it's going to be more of a challenge, since the Lion kernel no longer supports PowerPC binaries, so Rosetta won't work.
Bernd

Upgrading från Final Cut Studio 5.1 retail - which upgrade should I buy?

Some year ago I opted for the fulfil upgrade to the cross-platform version.
Now I have the package Final Cut Studio 5.1 retail, with serial numbers. It has DVDSP4, FCP, Motion, LiveType, SoundTrack Pro, etc.
There are two different upgrade packages to Final Cut Studio 2.
One costs 499, the other 699. Which one should I buy?

Yeah, I thought so too. But better safe than sorry and ask here first.
Thank you!

How do I import an AVI file for use with FInal Cut Express

How do I import or use an AVI file with Final Cut Express?
Thank you. Do I need to convert my AVI file and what is the
easiest way to do that? Thank you.

You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

Tiger Upgrade interfering with final cut

Similar Messages

Maybe you are looking for