Tiger working with FCP 4.5 or HD?

Hi Everyone,
I was experencing a problem with my Mac G5 10.3.9 and FCP HD that filled the HD with a file that filled the secondary HD up leaving only 2 gig to remain. This problem happened when capturing a small video clip to both secondary and primary drives. I tried everything including erasing both drives and doing clean installs. I still had the same problem and in a last ditch effort installed the Tiger OS on the computer. Now FCP HD will not see the JVC BR-DV3000 deck I have used hundreds of times. Anyone have any ideas??? Thank you!
G5, Dual 2gig Mac OS X (10.4.8) MAC G5, 1.5 Ram

why not simply log and batch capture the files? Does that work?
The lack of visibility of the deck can probably be traced to the need to reinstall QT.
Often in upgrading the OS, QT or FCP for some odd reason QT will get knocked slightly off kilter. The usual solution it to force a full reinstall of QT.
This is how:
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
Good luck.
x

Similar Messages

  • Apple Pro Res 4444, does it work with FCP 6?

    Does ProRes 4444 work with FCP 6? I don't think so but wanted to check before I had the film lab telecine my film. I'm stuck with FCP 6. Might have to go with ProRes 422 (HQ) ?

    Jon Chappell wrote:
    Are you 100% sure that you can write to ProRes 4444 files in QT 7.6.2? I would have thought you'd need FCS3 for that.
    See, I knew the editing gods would humble me.
    I just re-tested this on a separate FCS 2 partition and it turns out my memory was failing. While you can read and import the new ProRes codecs, you can cannot render out to them in the FCP 6 + QT 7.6.2 universe. So yeah, getting all ProRes4444 files would be a hassle on an FCP 6 setup.
    Ugh, sorry for the bad steer.

  • Does Magic Bullet Looks works with FCP X?

    Hi guys, does magic bullet looks or mojo work with FCP X?

    http://www.redgiantsoftware.com/blog/2011/06/24/final-cut-pro-x-and-red-giant/

  • Working with fcp 6.0.6 I can't see the clip in the viewer until I start or play. Used to show fine.

    Working with fcp 6.0.6 I can't see the clip in the viewer until I start or play. Used to show fine.

    This is the FCPX forum.
    Sounds like the viewer is in wireframe mode or is alpha display mode. If this isn't the case you need to go to the Final Cut Studio forum and give more details.

  • How well does Qmaster via Compressor work with FCP 7?

    How well does Qmaster via Compressor work with FCP 7?

    It works wonderfully as long as you are running (at least) OSX 10.5.6 + QT 7.6 on a serious intel mac.
    x

  • Focusrite Saffire interface not working with FCP 4?

    I can't seem to get my focusrite saffire audio interface to work properly with FCP? It works fine with all other apps (itunes, QT, Logic etc) and all the other Studio apps (Motion, DVD Pro and Soundtrack Pro) - but in Final Cut the sound is 'distorted' and 'jumpy'? All focusrite and FCP software is upto date.
    Has anybody else had this sort of problem? Is anybody happily using the saffire with fcp? (I can't seem to find any on the search!)
    it seems strange that it wont work with fcp but work with the other apps of the package? I can't see any sort of settings in fcp to solve this issue? Any help?!

    I am actually only using it to play back audio 'syncd' with picture straight off camera or importing clips from quicktime/DVD's etc. in FCP - it is this that I can't hear correctly? (all the clips are fine by the way played in other aps etc)
    Yes, editing is done in Soundtrack Pro or Logic Pro (used to have pro-tools mbox - but decided to ditch it and go down the Logic route with another interface!) - but I expect to be able to hear basic audio with picture in FCP?
    Sample rates are matched?...

  • How do HD-SDI work with FCP?

    Hi,
    Do anyone mind to explain that how do HD-SDI work with FCP?

    Hi
    You'll need an HD-SDI I/O card, such as a Blackmagic Decklink or Aja Kona, which has those connectors. The software they include will allow FCP to use the SDI ports for capture or monitoring, and add sequence presets for different video formats.
    Check the product pages at Aja or Blackmagic for more information, and these forums for various opinions on either card. I've been using a Kona LHe for 23.98 capture from an HDCAM deck, and monitoring the same sequence to a Sony CRT at 29.97. Works very well.
    Matt

  • Configure Macbook Pro with one hard drive to work with FCP

    I would like to do some video editing while on the road. I have a new Macbook Pro with Final Cut installed. I know that the capture scratch should not be on the same hard drive as the application. How do I set up the computer to work with FCP when I have only one hard drive. I do have external hard drives to use when editing at home but I would like to edit while traveling in the car or on a plane.

    If you don't have an external drive attached, FCP will default to the system drive. The CAPTURE SCRATCH folder will be located in the DOCUMENTS>FCP DOCUMENTS folder. You CAN edit on the system drive, but performance might suffer and you might get dropped frames. DV, OFFLINE RT are fine, HDV and other formats might give you headaches. I have edited DV and OFFLINE RT HD on my laptop's hard drive on a plane without much problem.
    Get a bus powered hard drive like the G-Raid Mini. This way you only need one power source.
    Shane

  • How to get lg BE14NU40 blue ray burner to work with fcp or compressor

    how to get LG BE14NU40 Blue Ray Burner to work with FCP X or Compressor??

    Hello Ron,
    First up, you don't have to use Compressor to burn a Bluray Disc.
    FCP X can do this with it's own built-in software. Compressor of course can do the job.
    In my experience some burners work and some don't.
    I use an the older version of this burner:
    http://eshop.macsales.com/item/Other+World+Computing/MR3F8BDSD16/
    It works fine with Mac.
    Al

  • HT1338 I am working with FCP

    I am working with FCP Version 7 in Mac OS X Version 10.6.8  On Wednesday evening all my project was saved and everything was ok but on Thursday morning I opened the same project but in canvas it appears green. MPEG-2 Video, Linear PCM, Timecode was my video format that I have been editing, whereas the different format aside  "MPEG-2 Video, Linear PCM, Timecode" works in FCP. Please help me.

    Yea, it sounds like the backlight is going, or the inverter.  If you let it sit in BIOS for awhile will it happen there too?
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • 2.8GHz Quad-Core Intel core i7     WILL IT WORK WITH FCP?

    I am planning on purchasing the new IMAC 2.8GHz Quad-Core Intel core i7 27" screen for work with FCP. The requirements to install FCP state in relevent part:
    ATI or NVIDIA graphics processor (integrated Intel Graphics processors not supported).
    Does this mean that the 2.8GHz Quad-Core Intel core i7 27" screen will NOT OPERATE FCP. I know that the Quad-Core Intel i7 is an upgrade for the system should I stay with the basic NVIDIA graphics processor?

    I understand there is a difference between the "graphics cards" and the Processor and Memory?
    Graphics Cards:
    27-inch model with dual-core processor, one of the following:
    ATI Radeon HD 4670 graphics processor with 256MB of GDDR3 memory
    ATI Radeon HD 4850 graphics processor with 512MB of GDDR3 memory
    27-inch model with quad-core processor:
    ATI Radeon HD 4850 graphics processor with 512MB of GDDR3 memory
    I am going to purchase the quad-core processor which will come with the ATI Radeon HD 4850 processor with 512MB of GDDR3 memory
    The Processor and memory according to Apple Specs are as follows:
    27-inch models only, one of the following:
    2.66GHz quad-core Intel Core i5 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.2GHz
    2.8GHz quad-core Intel Core i7 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.46GHz; Hyper-Threading for up to eight virtual cores
    I would like to purchase the 2.8GHz quad-core Intel core i7 processor
    This is where my concern is when FCP says (integrated Intel graphics processors not supported)!

  • A list of plugins that work with FCP

    I have been looking around to buy some new effects and transitions for FCP, but most are not compatible, which is mind boggling because I see Programs like SOny Vegas being supported and not final cut pro.
    http://www.prodad.de/gb/adoragenewdetails.html
    I see there are not many plugins that work with FCP, does anyone have a list of plugins that work with final cut pro?

    Interesting - they list my free plugins, but not my commercial plugins...
    Patrick
    standard disclaimer: I may receive some form of financial compensation for the link above

  • DIVX Converter/Codec not working with FCP and OS 10.7?

    For years, I've used the DIVX Converter/Codec to output video files from Final Cut Pro 7.0.3 via the Export/Use Quicktime Conversion/Divx as a .divx file. But today, after I upgraded my OS from 10.6 to 10.7 and installed the latest version of DIVX Pro, the normal output functions pop the screen showing that the output processing has started, but it then hangs with "0%" showing in that screen. Is DIVX no longer compatible with FCP in 10.7? Or, is there some additional setting change needed somewhere to make it work as usual. Oddly, DIVX has no email contact information on its site's "Support" section and nothing in their forums appears to address this. Any suggestions or info appreciated.

    You ask this question at FCP forum this is FCP X forum https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Will Motion 5 work with FCP 7?

    Since I am not interested in downgrading to iMovie Pro, will the new Motion work ( templates, etc. showing up) with FCP 7?

    Check out the Motion 5 section here: https://discussions.apple.com/community/professional_applications/motion_5
    Alan

  • Does Lion work with FCP 6?

    Hello,
    I want to purchase a Mac Book Pro 13 or 15 " computer; however, I have FCP 6.  Will Lion, the new OS system, work with it?
    Any feed back will be welcome.
    Thanks

    nope...
    http://support.apple.com/kb/HT4769

Maybe you are looking for

  • Can I use my time capsule for back up only and not as a router?

    I have been trying to set up my time capsule as a router but have not been successful, the dsl I am using is not responding. Can I just use my time capsule as a back up device and not as a router? if so how can I do this?

  • SSRS DataSet Filters

    I have a dataset for a report - by default the report shows "all" by using "NULL" as the value in the procedure. Snippet from SPROC Where.... ISNULL(r.USER, 'Unknown') = @USER OR @USER IS NULL) In the RowGroups where I would like to have my report on

  • IPhoto doesn't show thumbnails of videos.

    When I connect my Sony Handycam HDD, iPhoto opens and a series of video clips are shown in the Device.  However these frames are blank and have no image so I can't see which video is which for selective importing.  Photos taken on the Handicap appear

  • How to check Java Version while showing applet in browser?

    Hello All, We have an application which has client and server mechanism. Our application can be accessed by any internet browser on any machine of the network but there is only one server in the network. One of the functionality in the application is

  • OM Infotype enhancement  HRTnnnn table enhancement

    Hi Gurus, I got a requirement to add a few fields in OM infotype. In PPCI, I can add this to HRP table, but I need to add this in HRTnnnn Table. How can I enhance HRT table. Can I use append structure from  SE11  (I ave to update 7402/03 infotypes).