Tile and view the whole image
Does anyone know of a script or way to do the following: window/arrange/tile all open docs and then set the zoom to view the whole image area on all?
Thanks for any help.
This thread explains how to do something similar using an action.
http://forums.adobe.com/thread/698931
MTSTUNER
Similar Messages
-
How do i adjust the contents on one layer at a time and not the whole image - photoshop cs6
hi
i am creating a photo thing in photoshop cs6 and i have a mountain behind a layer that is visible and in total i have about 6 layers and when i try to change something on layer 6 (so somehting like the saturation and hue) it changes whats on layer 5, at the same time, so how do i make it so i just adjust the contents on layer 6?
thanks
mrredrunner100
ps thought this might help
https://drive.google.com/file/d/0B1KO1zQcxYLWazZNRDh1Q3ZaMmc/edit?usp=sharinghello.....
while on the adjustment layer the properties panel will show a button that looks like so:
if you select it the adjustment will only be applied on the layer below and the adjustment layer will look like so.
hope that helps. -
I'm editing a wedding that I shot for a family member, But when I play it the top of the image is cropped off in the veiwing window but it shows the whole image in the project strip. When I make a DVD with it transfer the whole image or will it be the chopped off image and how do I make sure it is the whole image ?
What version of iMovie are you using?
For 9.09..
If the image is not 720p, you might have to crop it to have freehand control over which bit gets cut off.
How to crop it...
In the project window hover your cursor over a section of the clip in the bottom right corner as seen below:
Click on the cog and open up Cropping,Ken Burns and Rotation.
Click on Crop and drag and set to where you want it to be cropped, then click Done. (Because mine isn't 720p, iMovie automatically makes it so I cannot include the black border. If you do not mind this click Allow Black.)
Glad if this helped! Please rate up. -
I purchased an episode of greys anatomy and it will not play it. It just plays a 30 sec part. So how do I view the whole episode
Hello CharityTerry1
Try deleting the episode from your library and then download it again from your iTunes in the Cloud purchase. If that does not work, the report the issue to the iTunes Store.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G. -
How to load images in List from Xml and view the image and resize the image & save in Flex?
Hi Friends,
I am new to flex i am doing application for image resizing rotating and save the resize image.
I want to load the images from xml file to listcontrol and show that images as a icon in the listview,then i want to drag that image to panel that time it should show it original size of the Image.then it allows user to resize ,crop,rotate the image.then i want to save the resize image,when i save the resize image it should replace the original image in the xmllist.
I am looking for some useful suggession ,if you dont mind want to see some snippet code.
It will help me to understand the concept.
Cheers,
B.VenkatesanNot in Crystal Reports Basic for Visual Studio 2008. You'll have to upgrade to CR 2008 (12.x). Then use kbase [1320507|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] as a guide on how to do this.
Ludek -
Faces, Viewing The Full Image
When I'm in Faces and I'm looking at a the row of unnamed faces along the bottom, I would like to be able to open up the image.
Is that possible?
Double clicking the image doesn't seem to do anything.
Right clicking only brings up Not a Face.There are tiles on the Toolstrip which allow you to switch between "Photos" view (the entire Image) and "Faces" view (the Face snapshot {that's what Aperture calls it} cropped automatically from the Image). These do not show when you are in "All Faces" view. You must double-click a Face snapshot and enter "Faces" view in order to enable this functionality. Clicking the "All Faces" tile at the top left of the Browser will return you to "All Faces" view.
More here.
(Added)
When there are two or more snapshots in the Un-named Faces filmstrip which I want to examine, I flag them and then go to Flagged view.
Message was edited by: Kirby Krieger -
Why can't I see the whole image?
I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit versions of the software. I even have the same problem when I create a new image from scratch. It doesn't matter whether I reboot the system either.
I am using Windows Vista, on a two year old machine, but it does have a powerful processor, and 4GB of RAM. I've checked the system resources, and the CPU is only 25% occupied with 2GB or RAM to spare... so what gives?You need an updated display driver.
Go to the web site of the maker of your video card (not Microsoft), and locate their current release for your hardware and OS. Download and install, and it will almost certainly solve this issue.
-Noel -
How can I change one section of the document to a landscape orientation and not the whole document?
Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry -
How do you move a single album, and not the whole library, in iPhoto to an external hard drive?
File -> Export to a folder and copy it over.
That will give you a folder with the images. There is no way to move an album outside of iPhoto. You would need to have a library containing it.
Regards
TD -
I just want to make my header taller so I can see the whole image in the persona I downloaded from firefox personas.
They should be nearly identical - Internet recovery has a few less features and takes far longer to start up. I think you only get Internet recovery on certain macs and even then only if the recovery partition isn't working. Once in recovery mode you should be able to repair the hard drive and permissions using disk utility.
Once you have repaired the disk you should be able to choose an install OS X option where it downloads a fresh copy space permitting and it tries to keep files in place.
I think N during startup gets you network boot and D on gets you the hardware test. Shift during startup should try to safe boot if there is some sort of conflict keeping it from starting normally. -
To view the whole SC I have to search it in advance search, where I am gett
To view the whole SC I have to search it in advance search, where I am getting no authorization message.can anyone advice what will be the roles for this and steps.
Hi,
Have you assigned the standard role /SAPSRM/EMPLOYEE to the user? If you are using EHP1 then you need to add the role /SAPSRM/EMPLOYEE_EHP1 and also try adding the role /SAPSRM/EMPLOYEE_ESS
Regards,
Jason -
How to view the employee image in Selfservice?
Hi firends,
I'm trying to view the employee image in Selfservice.
The idea is the following:
- When we enter in Preferences Menu --> Person Search Menu
- Then Customize for HR User --> Level : Responsability
(we choose a responsibility associed to Preferences) and then, inside the "advanced properties" for the columns we can associate an URL to the column we want...
- The idea is to associate an image (photo) to the employee number.. so we could use an url link to the blob column stored in fnd_lobs if the employee image would be stored as an attached document for the employee... or... a link to show the image column (lon raw) in per_images table... (I think this would be more difficult)
What I don't know ... how to do is how to show the image.. (how to build the url through the customization of the fnd_gfm.get procedure....
Another doubt in relation with that is..
When we show the image stored as an attachment in fndattch form, the internet explorer opens with the url
http://my_domain:8000/pls/my_project/fndgfm/fnd_gfm.get/42387354799/423868/fnd_gfm.jpg
the last number: 423868 is the file_id in fnd_lobs but... how about the other? how is it generated? Have this some relation with the problem to show with download_blob....?
Any ideas
Thanks,
Jose.the "Employee Directory" shows you the photos by default. Should not be that hard to add an url via personalizations that points to that directory.
good luck. -
When I select Brush, changing the exposure changes the whole image exposure
When I select Brush, changing the exposure supposed to change only the selected part exposure.
In my LR-5 it changes the whole image exposure. What am I doing wrong?More than likely you have all the adjustment tool's sliders hidden, and you've thus moved the exposure slider from the Basic panel just below, which of course is a global adjustment. Check the dark arrow that I've highlighted in this screenshot, it's likely pointed left (everything hidden), so click on it and it will point down and all the adjustment brush sliders will be revealed.
-
How to open and validate the tif images via java?
Is it possible to open and validating the photoshop images via java. Kindly advise me.
Thanks for looking into this.
Maria PrabudassI have recently looked at athe code for Image Processor.
To avoid bailing on errors it uses two techniques.
1) It turns off all PS error reporting in addition to just turning off dialogs with: app.displayDialogs = DialogModes.NO; (it restores the original settings when exiting)
2) It uses the Javascript construct Try.....Catch around the basic body of the code so "any" error will not abort the script but just jump to the "Catch" code.
Hope that is useful -
How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.
I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!
Maybe you are looking for
-
i hit the clear setting and content on my phone and now my phone is stuck on the apple sign and wont turn on or off
-
Error creating ICP Reports in non-HFM format
Hi, I've got HFM 11.1.2.1.103 installed on a 32-bit Windows Server 2003 R2. ICP reports in HFM-fromat open just fine but ICP reports in non-HFM fromat (pdf, xls) open with the following error (although they used to open fine too): An unknown error ha
-
Naming Exception in looking up JMS queue
I use my code to send message to queue (DeliveryService/inbound) configured in an weblogic app server in a Dev. Environment. But when I use the same code but ofcourse different URL, username, password etc. to send to another queue with same JNDI (Del
-
Thumbnail from middle of video being added upon export
FCP 7 OS: 10.7.5 I've been using the same settings on FCP for years. no updates to either my OS or FCP. no settings changes. but now when I export the video (using Squeeze-again, same settings as before) - an image from the middle of the video is
-
Can we migrate reports from one environment to the other? If so, how? Thanks