Tile Container issue

Hai Friends,
When the Tile container’s direction property is set to “horizontal” you can see that the children are laid out left to right then top to bottom, like:
[1][2][3]
[4][5][6]
[7]
But if you change the direction property to “vertical” you can see that the children are laid out top to bottom then left to right, like:
[1][4][7]
[2][5]
[3][6]
But I want below ouput..
[1][4]
[2][5]
[3][6]
[7]
How is it Possible..Please Help me..
Thanks in advance,

Hi Ran,
It works fine in the below link
http://jsbin.com/afif/370/edit
Could be some other issue.
The core method get RTL could be obtained by
sap.ui.getCore().getConfiguration().getRTL()
Thansk and Regards, Venkatesh

Similar Messages

Dropping dragged object to specic location of Tile Container

Hi All,
I am facing a problem in drag and drop application. Tehe problem is that when i am dragging the HBox to Tile container it always adding at last or first position but i want to add to specfic location based on existing children of Tile Container i..e when i am dragging the hbox on Tile container i want on which children of Tile container my mouse pointer so that i can get the position of that child and before or after of that particular child.Please use below image for refrence.
In this example if i am dragging the desig field from field objects list and drop it in between the empno and firstname child on result object tile is is getting added at last in tile container. i am unble to get on which children of tile container the desig fiel drop.
Thanks in advance.

Hi All,
I am facing a problem in drag and drop application. Tehe problem is that when i am dragging the HBox to Tile container it always adding at last or first position but i want to add to specfic location based on existing children of Tile Container i..e when i am dragging the hbox on Tile container i want on which children of Tile container my mouse pointer so that i can get the position of that child and before or after of that particular child.Please use below image for refrence.
In this example if i am dragging the desig field from field objects list and drop it in between the empno and firstname child on result object tile is is getting added at last in tile container. i am unble to get on which children of tile container the desig fiel drop.
Thanks in advance.

A repeating plug-in container issue

I am trying to update Roboform and everything seems fine until I get to the Roboform Landing where it lists all of the fixes, and then an error message pops up that says:
Can not load RoboForm add-on
Please restart browser or reinstall RoboForm
TypeError: aId is undefined
resource://app/modules/CustomizableUI.jsm(1104)
It does this when I close Firefox AND when I allow Roboform to close it. What is a plugin container issue and how can I get Roboform updated successfully? Firefox 35.0.1

hi all - I have a similar problem with flash - basically the plugin crashes pretty much every time I am not looking at it directly (playing online games in tabs for example)
I have tried disabling the "memory-safe-away-time-out thingee" in config:about - to no avail. I have also tried disabling all other plugins (not that I actually have many - Java, VLC, quicktime, some windows stuff), have set themes to default, have made sure all plugins are latest version.
currently running the 4.0.b2 Firefox version cause of the plug in crashes in the 3.6.8 version - same problem though.
and where it gets really strange is that a friendly help person on the adobe site suggested I upgrade my firefox to version 3.8 (while I was on the 3.6.8 version) and that would fix it. which I thought was.. interesting as 3.6.8 is the latest version as Firefox upgrade check insisted.
by now i have invested at least 4 days trying to fix this issue and I gotta say... I am tempted to actually try other browsers, though firefox is my default browser since years.

Error when tile container gets called

Hi,
I have the following scenario
1. When user logins landing page, user can able to navigate between tiles
2. To go back to the landing page, when user click on Back button on the header (green colour button), I am getting the following error
Details of the error
On click of the button the following code get called
onBackButtonPress:function(oEvent,oData){
// window.location = util.getServiceUrl(CONSTANTS.APPLOCATION);
var sViewToNavTo = "landingPage";
var bus = sap.ui.getCore().getEventBus();
bus.publish("nav", "to", {
id : sViewToNavTo,
data : {}
The landing page has a tile container which adds the tiles.
Can you help is highly appreciated

I'm not very familiar with Tuxedo unfortunately.
I recommend that you post here:
Could not get TuxedoConnectionFactory, setting up AP's incorrectly?
You could also start with the code here:
Where to Download weblogic.wtc.jatmi Library/Package
And follow the instructions here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13756.pdf

Plugin-container issue. Works in v 3.6 but not in 12.0

So im having a issue here.
I love the 3.6.28 Firefox version as its simple and fastest for my Slow PC.
I though installed the new 12.0 version as FF decided not to support 3.6 anymore and was hugely disappointed with how slow it is.
Anyway my issue:
Ive disabled plugin container in 3.6 due to eating up my RAM.
Settings: http://kb.mozillazine.org/images/Fx366-OOPP.PNG
Installed FF 12.0 and i now suddenly i see 2x plugin container running at the same time. When i disable it again the same way i did in v 3.6 I cant play my favourite game anymore as its all grey when the game launches. Its called Quakelive.com and is runned through the web. So i went back to v 3.6.
Can i work around this somehow? I dont like having the plugin container eating my RAM. And the point it actually did work in the earlier version 3.6 it should work now?
What i want is do disable plugin container and still be able to run flash, java etc just like the way i have in v 3.6.
I hope someone has an idea. Thanks!

I forgot to ask you. What is your Java version? It is possible a old version of Java on your system is being blocked by Firefox because of some security risk.
So if you could could go to:
'''Tools > Add-ons > Plugins'''
And tell me what version of Java you have there. If you have more than one, tell me all of them. Thanks
Don't update your Java before letting me know what version you have first. That way I know for sure what Java version was causing your problem.
To update Java:
<br> http://java.com/en/download/index.jsp
'''Edit:'''
<br> It looks like you have Java 6 update 32, which isn't old. But they also released Java SE 7 Update 4 at the same time. Supposedly Java 7 has more features/improvements. I wonder if the Quake Live people updated their Java to Java 7. Hopefully installing Java 7 works and doesn't cause a new problem.

Firefox crashing---most likely related to the plugin container issue, but also unable to uninstall firefox, there is no prompt that opens when I try to.

Like many others, I've been having issues with firefox since the update. The plugin container seems to crash my browser, or freeze the whole of my computer, and I must restart. I've switched to internet explorer for now.
Moreover, now Firefox doesn't even seem to open now. I doubleclick on the icon, or try to launch the browser in any way, and it looks like it thinks about opening, but nothing ever occurs. I've watched my system processes, and firefox.exe appears for a moment, and then disappears, like its process has ended, but I've done nothing.
Additionally, I can't even seem to uninstall firefox---the uninstall setup doesn't open, and trying to do it from add/remove programs on windows xp doesn't seem to work either.
I also sometimes get an error that says windows can't find a file/path, related to a 'profile' but haven't had that for a day or so---since I can't even open firefox now.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hello sprytely, go for a clean re-install, this means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from the next full installer https://www.mozilla.org/en-US/firefox/all/ and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. 
Thank you.

Flash container issue

I am facing a issue in Flash container. I am having a project which has main container which call different SWFs into it. Now I call this main container file into another container, and their problem starts. Many option doesn't work properly which generally have _root, _parent etc...
If I want to run project (main container SWF and child SWFs) into another container file which place on a website. I want to show whole project from this container file so what I need to do? Please help....
Regards
Suvrat

In your Main SWF, set the _lockroot property to "true". This should make sure that any child SWFs that is loaded into your Main SWF to refer it as the _root or _parent.
http://help.adobe.com/en_US/as2/reference/flashlite/WS5b3ccc516d4fbf351e63e3d118ccf9c47f-7 f6b.html

Firefox crashes: Plugin-Container Issue

After the second-to-last update, I started noticing an increase in browser crashes. The issue is always that the Plugin-Container has stopped working. I understand that the plugin container's function is to prevent such problems, but it does not appear to be working. I have the latest version of Firefox, updates, etc, but that doesn't seem to be helping. Crash reports have been sent to Mozilla, but the problem is ongoing. I use my browser heavily in both standard and incognito mode for business. I've used Firefox for a long time, but if I keep losing information mid-process, I'm going to have to consider other options. If anyone has any experience with the problem or suggestions on a possible solution, that would be greatly appreciated.
Thanks,
Nomenica

Tumblr.com. The way the site is set up, I don't believe it shuts down images, etc, once you've loaded and passed them. It's endless scrolling, so that could potentially be a lot of loaded data.

Windsor Castle Container Issue...

Has anyone observed this bug with Windsor container, This is a example of the problem that i am facing. Class A Implements Interface I, and both A & I are registered with the container as Singleton. During application Load 'class A' is resolved and some
processing is done. During the application log out the container instance is disposed off. when we log in to the same application again and when 'class A' gets resolved we still get the same object that was resolved before the container was disposed. This
was reconfirmed many times by comparing the Hashcode of the object.
This seems to be issue and really do not understand logically how the same object gets returned even after container object is set to null in the dispose method during the log-out procedure.
Look forward to a reasonable logic from other great minds.

Errm.
This is a third party question and whilst you might have a wpf app uses windsor, it's not a wpf question.
As a result you may well find your question disappears into some other forum and you might not get very much help.
I don't really follow the question.
If you close an application and it's gone, dead... It's a gonner.
Nothing of that app is going to be there in memory.
There is no instance of any class to be resolved the next time you start that application up.
It therefore cannot be the same instance of that class.
Unless you have something which remains in memory.
It could well be that the same hashcode is returned when you instantiate something. I dunno.
But I don't see how you can possibly literally have the same object.
Unless you're doing something weird like persisting it.
Even then, it's not literally the same object but it could have the same properties set.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How do i fix a flash "plug-in container" issue (ff indicates most recent version is installed)

Hello. to start with im not really up on the ins and outs of ff, ive used it for a while but not really tinkered with till this problem
Im running Vista (no comments on that please :p) and the latest version of as downloaded from the mozilla website (3.6 something)
my plug-ins are (version number):
2007 MS Office system (12.0.4518.1014),
Bio3D (12.0.0.733) - this comes with ChemDraw i think,
ChemDraw (12.0.0.733),
getPlusPlus for Adobe 16287 (1.6.2.87),
Java Deployment Toolkit (6.0.210.6),
Java(TM) Platform SE 6 U21 (6.0.210.6),
MS Office Live Plug-in for FF (2.0.4024.1),
MS (R) WMP FF plug-in (1.0.0.8),
Mozilla Default Plug-in (1.0.0.15),
Novell iPrint Plug-in (5.3.0.0),
Novell iPrint Scriptable Plug-in 1.0 (5.3.0.0),
Quicktime P-in (7.6.6.0),
Shockwave Flash (10.1.53.64),
Silverlight P-in (4.0.50524.0),
Windows Presentation Foundation (3.5.30729.1).
Ive been on numerous fix-it sites but cant find a solution i understand or can get to work. the problem still occurs in safe mode and with only shockwave flash enabled (this seems to be the issue) and after numerous reinstalls, i have also deleted all i can find of adobe and shockwave then reinstalled to no avail :(
Whats chrome like?
Thank you muchly
== URL of affected sites ==
http://www.youtube.com

hi all - I have a similar problem with flash - basically the plugin crashes pretty much every time I am not looking at it directly (playing online games in tabs for example)
I have tried disabling the "memory-safe-away-time-out thingee" in config:about - to no avail. I have also tried disabling all other plugins (not that I actually have many - Java, VLC, quicktime, some windows stuff), have set themes to default, have made sure all plugins are latest version.
currently running the 4.0.b2 Firefox version cause of the plug in crashes in the 3.6.8 version - same problem though.
and where it gets really strange is that a friendly help person on the adobe site suggested I upgrade my firefox to version 3.8 (while I was on the 3.6.8 version) and that would fix it. which I thought was.. interesting as 3.6.8 is the latest version as Firefox upgrade check insisted.
by now i have invested at least 4 days trying to fix this issue and I gotta say... I am tempted to actually try other browsers, though firefox is my default browser since years.

Container issue

Hey. I posted a question on this before, but couldnt get a reply, problably too much code, so I thought I would try again but try to cut down on things. Basically, I load images from an xml file, and then use this method to add them each to their own container
function urlLoaded(event:Event):void {
     urlLoader.removeEventListener(Event.COMPLETE,urlLoaded);
     xml=XML(event.target.data);
     xmlList=xml.children();
     for (var i:int=0; i<xmlList.length(); i++) {
          var thumb:Thumbnail=new Thumbnail(xmlList[i].url);
          arrayThumb.push(thumb);
          arrayThumb[i].y=150.5;
          arrayThumb[i].x=i*110+280;
          photoContainer.addChild(thumb);
          arrayThumb[i].addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
          arrayThumb[i].addEventListener(MouseEvent.MOUSE_UP, dropIt);
I basically want to reuse all this code from many events, so in order to do this, I need to clear all my containers if they are holding an image. Just for info, photoContainer is a sprite, and added directly to the stage. arrayThumb is an array holding images to be displayed. So, too empty the array, and to remove all the containers, I am trying
function click_handler(event_object:MouseEvent) {
     if(photoContainer.getChildByName("thumb") != null){
          while(arrayThumb.length > 0) {
               arrayThumb.pop();
          loadXML("pics.xml");
     else{
          loadXML("pics.xml");
My thinking behind this was if photoContainer has any children named "thumb", it should remove all photoContainers (didnt know how to do this). It should also remove all elements of array, then it should call loadXML. I think I am on the right tracks on removing all the photoContainers if any exist, but how can I get rid of them?
cheers
Additionally, it never appears to even go into the if statement, even if a photoContainer exist, so think this might be slightly wrong aswell.

As for removing children, try:
function click_handler(event_object:MouseEvent) {
     removeChildren(photoContainer);
     loadXML("pics.xml");
function removeChildren(doc:DisplayObjectContainer):void {
     while (doc.numChildren > 0) {
          doc.removeChildAt(0);

WORKFLOW Container Issue - Empty Lines not Appended to SWW_CONT Table

good day fellow developers..
any one encountered this error?
I have a WF Container declared as multi line...
In my program before i start the workflow i append 3 lines on the table..
line 1 = SPACE
line 2 = 10000
line 3 = 20000
i already check the FM which startS the workflow..
3 lines were appended to table...
but when i validate the container at swi2_freq..
only 2 entries where posted..line 1 was not inserted in the container..
during my investigation..i discovered that the first line of the table was not appended..
in the method CHECK_ALL
it has a code which disregards the value of the element if the first entry of the table is initial...
i have no idea regarding this logic.
can anyone explain to me why this method was added to ECC6?
this method is not available at 4.6c...

good day fellow developers..
any one encountered this error?
I have a WF Container declared as multi line...
In my program before i start the workflow i append 3 lines on the table..
line 1 = SPACE
line 2 = 10000
line 3 = 20000
i already check the FM which startS the workflow..
3 lines were appended to table...
but when i validate the container at swi2_freq..
only 2 entries where posted..line 1 was not inserted in the container..
during my investigation..i discovered that the first line of the table was not appended..
in the method CHECK_ALL
it has a code which disregards the value of the element if the first entry of the table is initial...
i have no idea regarding this logic.
can anyone explain to me why this method was added to ECC6?
this method is not available at 4.6c...

Flex Box container issue

<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Image;
import mx.controls.Alert;
public var img:Image = new Image();
public function GetSize():void{
Alert.show(cont.getChildAt(0).width.toString());
public function LoadImage():void{
img.source= '
http://localhost/compile.php.jpg';
img.width =100.99;
img.height =200.99;
cont.addChild(img);
]]>
</mx:Script>
<mx:Box id= "cont" >
</mx:Box>
<mx:Button x="28" y="325" label="LoadImage"
click="LoadImage()"/>
<mx:Button x="158" y="325" label="GetSize"
click="GetSize()"/>
</mx:Application>
The above application returns image's width and hieght as
100X200.
How do we get the actual dimention (100.99 X 200.99) by using
Box container?

"drnathan82" <[email protected]> wrote in
message
news:go5c7f$6ko$[email protected]..
> <?xml version="1.0" encoding="utf-8"?>
> <mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
> layout="absolute">
> <mx:Script>
> <![CDATA[
> import mx.controls.Image;
> import mx.controls.Alert;
> public var img:Image = new Image();
> public function GetSize():void{
> Alert.show(cont.getChildAt(0).width.toString());
> }
>
> public function LoadImage():void{
> img.source= '
http://localhost/compile.php.jpg';
> img.width =100.99;
> img.height =200.99;
> cont.addChild(img);
> }
> ]]>
> </mx:Script>
> <mx:Box id= "cont" >
> </mx:Box>
> <mx:Button x="28" y="325" label="LoadImage"
click="LoadImage()"/>
> <mx:Button x="158" y="325" label="GetSize"
click="GetSize()"/>
> </mx:Application>
>
> The above application returns image's width and hieght
as 100X200.
> How do we get the actual dimention (100.99 X 200.99) by
using Box
> container?
Are you sure it's not returning the width of your LoadImage
button?

Float container issue

i needed to add a previous and next button outside a container for sub pages - so i created a second container to accomadate the extra space but its not working
heres a twin page - everything lays out properly
http://toddheymandirector.com/REEL/
but when i add the previous next within another container it still throws everything off
http://toddheymandirector.com/ARCHIVE/
any ideas?

CSS for previous and next buttons:
button.prev,
button.next {
     font-size: 100%;
     padding:3px;
     width:8em;
.prev {position:fixed; bottom:125px; left:0}
.next {position:fixed; bottom:125px; right:0}
====================
HTML for previous and next buttons. Change URLs to your own.
<button class="prev" onclick="javascript:window.location.href='http://www.google.com'">⇦ Previous</button>
<button class="next" onclick="javascript:window.location.href='http://example.com'">Next ⇨</button>
Nancy O.

Tab Container Issue - Graph not plotting.

Hi All,
I am currently working on cost model which is split into two tab containers. the first tab contains the graph (Model) while the other tab contains the adjustable variables (Assumptions). The graph is dependent on the adjustable variables in the assumption tab.
The model was working correctly until 8 additional spinners and check boxes were added to the assumptions tab. Now the elements of the graph (lines are bars) do not plot. The graph is based on the variables in the Assumption Tab.
Have anyone encountered this before? I've checked all my forumals, links for both the graph and the spinners. All are mapped correctly.
Many Thanks,
Mike

Hello,
Actually I do know already several working solutions, to avoid this problem. You mentioned some of these.
But here I am purely interested about this behaviour. Is this a bug, or this is a normal behaviour? Like LabView saves system resources, so If we do not see a graph on the front panel, it does not update its values? (i mean the cursor values).
So I would like to see and understand whats going on when someone runs this particular example. (so I do not use this in a real project, this is only to show and examine this behaviour).
Also a bit dirty workaround: I could set the first TAB page via property node, when I run the code, so we always get the required result...
Anyone who could explain how a graph works in this example?
Thanks very much!

Tile Container issue

Similar Messages

Maybe you are looking for