Tile printing, please help!

I'm trying to print an image and am using Illustrator for it's tile print tool. I'm using A3 13x19 paper, tried to use as much out of 4 sheets as possible, but had some of the image chopped and looking for a way to print just the missing parts in 2 sections, hopefully only using 1 sheet of paper and then cutting it out.
So, I've printed (really expensive) 4 sheets, but have that middle part cropped out. Can I isolate that part, print in the same scale so I end up with 4 large prints, and 2 small strips in between? Thanks for any suggestions!

It looks like the full width of the image will fit in the height of the paper. Rotate the paper in the Media section (above Options, where you have Tiling turned on) and turn off Tiling. Drag the image in the preview window until it’s positioned as you want it.
Next time, use an overlap value higher than 0. Your image will not print on four sheets positioned as you have shown it, but it may fit on four, or even three, sheets rotated.

Similar Messages

My Photosmart Printer is not printing, Please Help.

I need help, my printer, acts like it's going to print, it goes through the processes as it sounds like it's going to Print, but the paper comes out blank, and I just put new ink in it. Can someone be so kind to please help.
Thanks

Hi MsLew,
Is the C7280 able to make a perfect copy of a document if you lay something on the glass of the printer and select color copy?
If so, reset the printing system (don't pay attention to the OS listed in the document) on the Mac and then install this HP driver package for Mac: HP Printer Drivers v3.0 for OS X. Restart the Mac, add the printer back into System Preferences.
Try printing at this time and let me know what happens.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Check printing ,Please help : Urgent!!!!!!!

One of the user printed wrong information on a check.She wants to void that check and reprint a new one.The information also came on next check,But the information of second check is not the check lot ,I mean in the system,where as first check information is in the check lot.Which T. codes do we use and how do i deal with second check..Do i need to do anything in FCHI(make changes to next available check number).Please help me as she needs it immediately.
First check : 1469
second check: 1470
1470 information is not in the system.
I will assign you points.
Thanks

hi first check in FCHI - as to what your range is. post your range here. Then go to FCh1 and view the check info. maybe you have the test out put checked so the first check is voiding automatically. Aslo check in FCHN
Points will be appreciated
Regards,
Zaid

Printing, please help!

I am still having so much trouble printing to my HP Photosmart B209a printer. I have tried everything, and nothing is working. Whenever I print the colors do not match up at all. I am using a Mac OSx and again printing to HP Photosmart B209a.
Please help!

I have tried that .. and still no luck! The colors still look significantly different.

Canon IP7250 - Color won't print - Please help

I have a Canon IP7250, two day ago, my printer showed me error C000. I resolved this error, but now my printer won't printing in colour. Black working properly. I tried many times to cleaning a toner in mainteace. When I go to "print head alignment" then shows error 2500. ? In nozzle check black colour is excellent but no other colors on paper.
Please, help me.
Thanks.

Again, the username/password, would either be your logon username/password or your "root" username/password if you have enabled it.
Another option would be to update your CUPS software. Multi-functional printers are usually "tricky" to get full-featured drivers for. It's possible that a newer version for this particular printer may exist with an update.
Still another option (and possibly a better one) would be to download and install the latest Gutenprint printer drivers. These were formally known as Gimp-Print drivers. (ref: http://gimp-print.sourceforge.net/MacOSX.php3)

I cannot get my iphone 4 to print yo my brand new photosmart 6510 printer please help

please help me get it to print. I've tried to search for the printer serveral time and it can't find it. All of my other computer on working wirelessly
Thanks

The steps given above would be the correct way to utlize Air Print.
AirPrint makes printing your email, photos, web pages, and other documents easy with no software to download, no drivers to install, and no cables to connect. Simply hit 'print' and continue surfing the web without a single interruption.
A quick workaround, for your issue would be to download HP ePrint Home & Biz app from the app store which will help with finding printer on network and give you diffrent print options.
Print from virtually anywhere with HP ePrint Home & Biz: print wirelessly to supported HP printers on a local Wi-Fi/other network; print to any registered HP ePrint-enabled printer in the world.
1. On your mobile device, install and register with iTunes if you have not done so already.
2. Open the Apps Store .
3. In the Apps Store Search feature, type HP ePrint Home & Biz , and then tap Search .
4. If prompted, provide your iTunes account information, and then tap OK .
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....

I can't connect OS X Yosemite 10.10.2 version with Canon LBP2900 Printer, Please help how to connect...

Hi.... Apple Support Communities...
I used Apple MacBook Air 2014 (13 inch) series with OS X Yosemite 10.10.2 version...
And I have a printer of Canon LBP2900...
My problem is that, I can't connect my Canon LBP2900 printer with my new OS X Yosemite 10.10.2 version.
My previous OS X Mavericks is working well with my Canon LBP2900 printer...
But when I upgrade it to OS X Yosemite 10.10.2 version, my printer is not working...
Anybody please help me how can i connect OS X Yosemite 10.10.2 version with my Canon LBP2900 printer....
Thanking you.... Your suggestion in this regards is highly appriciate...

Your first step would be to upgrade to Snow Leopard (10.6). To do that, you would need to purchase the Snow Leopard DVD. Following that you could determine how much further you could upgrade.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Kernel Panic When Printing -- Please Help

I used to have the Kernel Panic problem all the time because I stupidly did not keep my computer on a hard surface. Once I started leaving it directly on my desk, the kernel panic subsided.
Now it's back. Every time I try to print something, a few pages print, followed by Kernel Panic (my screen darkens with symbol of the power button and error message tells me to restart my computer). I have 23.1 GB left on my hard drive (out of 120). I don't think this is the problem but I figured I'd mention it anyways.
Last time this happened, I had all other applications closed. The only thing open was the printing que and kernel panic still happened.
Please, please help me. I just started school and I really need to be able to print things and not have my computer shut off every time. Thanks so much!
My printer is an HP Photosmart C6380 all-in-one.

Thank you so much for your help! I appreciate it more than you know! Here's actually my most recent three kernel panic attacks (with the most recent at the very bottom). If you could diagnose what's going on with my computer, that would be so amazing! Any advice you have... my apple care recently expired so I am feeling a little hopeless :(!
Thank you!!!
Sat Aug 15 16:38:37 2009
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00dd1000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x049a659c, ECX: 0x041850d8, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x2528be48, ESI: 0x049a659c, EDI: 0x00000001
EFL: 0x00010046, EIP: 0x0013389a, CS: 0x00000008, DS: 0x25280010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2528bc68 : 0x128d0d (0x3cc65c 0x2528bc8c 0x131f95 0x0)
0x2528bca8 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x2528bdb8 : 0x19b3a4 (0x2528bdc8 0x8ae9bc 0xe 0x3a50048)
0x2528be48 : 0x134ed0 (0x49a659c 0x0 0x2528be68 0x428e21c)
0x2528be68 : 0x14045f (0x49a659c 0x0 0x2528be8c 0x202)
0x2528be88 : 0x1385c9 (0x428e218 0x45fab8 0x0 0x0)
0x2528bed8 : 0x13879c (0x428e210 0x0 0x0 0x138d6b)
0x2528bf08 : 0x195f2e (0x2528bf44 0x0 0x0 0x0)
0x2528bfc8 : 0x19b81e (0x40ff080 0x0 0x206 0x40ff080) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfff94a8
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Mon Aug 24 11:46:25 2009
panic(cpu 0 caller 0x00194E0C): pmap_enter: null pv_list!
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25023838 : 0x128d0d (0x3cc65c 0x2502385c 0x131f95 0x0)
0x25023878 : 0x194e0c (0x3cfcbc 0x3fe0000 0x0 0x16deb34)
0x25023918 : 0x160c66 (0x4b3700 0x3fe0000 0x0 0x160c2)
0x25023a68 : 0x1a471c (0x1435ed8 0x3fe0000 0x0 0x1)
0x25023b78 : 0x19b3a4 (0x25023b88 0x48cfc3c 0xe 0x190048)
0x25023d08 : 0x18320d (0x48cfc3c 0x25023d58 0x8000 0x0)
0x25023d78 : 0x156009 (0x48cfc3c 0x5265bc0 0x8000 0x3000001)
0x25023db8 : 0x12b4ee (0x5265ba0 0x59456a4 0x0 0x0)
0x25023df8 : 0x124b17 (0x5265b00 0x0 0x2c 0x25023edc)
0x25023f08 : 0x195f2e (0x25023f44 0x0 0x0 0x0)
0x25023fc8 : 0x19b81e (0x5bf9658 0x0 0x19e0b5 0x5bf9658) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffb298
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Tue Aug 25 09:13:35 2009
panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x0000000c, CR3: 0x00df6000, CR4: 0x000006e0
EAX: 0x251e3b78, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x01716e98
CR2: 0x0000000c, EBP: 0x251e3bc8, ESI: 0x00000000, EDI: 0x042e1ef4
EFL: 0x00010282, EIP: 0x00163e4a, CS: 0x00000008, DS: 0x251e0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x251e39e8 : 0x128d0d (0x3cc65c 0x251e3a0c 0x131f95 0x0)
0x251e3a28 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
0x251e3b38 : 0x19b3a4 (0x251e3b48 0x42e1ef4 0xe 0x140048)
0x251e3bc8 : 0x16eeb2 (0x412c000 0x42e1ef4 0x200d000 0x0)
0x251e3d08 : 0x18320d (0x412c000 0x251e3d58 0x8000 0x0)
0x251e3d78 : 0x156009 (0x412c000 0x4644cc0 0x8000 0x3000001)
0x251e3db8 : 0x12b4ee (0x4644ca0 0x45eeea4 0x0 0x0)
0x251e3df8 : 0x124b17 (0x4644c00 0x0 0x2c 0x251e3edc)
0x251e3f08 : 0x195f2e (0x251e3f44 0x0 0x0 0x0)
0x251e3fc8 : 0x19b81e (0x413dc9c 0x0 0x19e0b5 0x41c3718) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffb448
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386

I'm trying to print a multiple page document from my ipad using an Airprint printer. Only the first page is printing, Please help?

I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.

What version of iOS are you using? Some people were having this problem before, and it was fixed when they updated to iOS 5.

Trouble with the printer PLEASE HELP!!!!

Hi,
I was wondering if anyone could help me. I work at an elementary school and I was recently trying to set up one of our iMac computers with a new printer. The printer is a HP LaserJet 1320. I installed all of the drivers from the disk into the computer and it told me that I had to set up the printer in the "Desktop Printer Utilities" file. When I went to do that I found that there was no such file in the system. I was wondering if there was a way of getting the printer to work. And if so I need detailed instructions so that I can set up the printer properly for the teacher. PLEASE HELP
Thank you very much!

Hi, wacko179 -
Welcome to Apple's Discussions.
I believe they are referring to Desktop Printer Utility, which is a program, not a file. It is one of the standard OS 9 utility programs installed by default. Try doing a search on your hard drive for it - note that the spelling of its name is a bit different than the one you gave.
If it is indeed missing, you can use the utility TomeViewer to extract (expand) any files you want from an Installation Tome on an OS 9.x Install CD or download disk image, without running the installer.
How to use TomeViewer
The item Desktop Printer Utility can be found in the Installation Tome located here on an OS 9.0.x Install CD - (CD) >> Software Installers >> System Software >> Mac OS 9 >> Installation Tome.
Note that this requires the use of an original OS 9 disk named Software Install, or a retail OS 9.0 or 9.0.4 Install CD.

Problems printing - please help!

Hi,
I have an Epson R800 that I am using with Aperture 1.1. My printouts don't match the colors on my LCD screen. I am using the proper ICC profiles (for premium glossy photo epson paper). I have two questions:
1. Is there any way to print out the same image multiple times on a contact sheet with different gamma settings?
2. when I select the Print settings, it keeps defaulting to the
"standard paper setting" (instead of premium glossy, which i keep having to reselect). I have several presets, but it keeps defaulting to the STANDARD setting. It also defaults to the color controls setting under COLOR MANAGE (I keep turning that off)....please help.
one more quick question, I paid a lot of money for this program, where do I actually get tech support from? I would like a phone number with a live operator....:-D

Now try fiddling with the saturation and other settings. Sometimes it is virtually impossible to have the print look exactly like what is on the monitor, so you have to fiddle the various settings until you get the print you want. So much depends on the calibration of the monitor, and the lighting in the room, and the kind of paper you use, and many other factors. The acid test is the print. You have to fiddle until you get the print you want.
If your colors are too light, you could start by tweaking the exposure, or the saturation. You may have to have a too rich image on the screen in order to produce the right image in the print.
Recently, I needed an 11x14 of a superb 8x10 print, and I had to have the 11x14 done by a specialty lab, because the Epson R800 won't go to 11x14. So I took in the print and the image file, and my friend was able to produce an 11x14 precisely like my 8x10 print. He had to do quite a bit of fiddling to accomplish it. It was by no means simply a matter of matching my print on screen. He had to work to get his system to produce precisely the colors and exposure, etc. etc. that I had in my print.
You may want to go through a major calibration effort in order to bring your screen image closer to your print.

Stopped printer please help

I did some printing and stopped the printer as it was printing.Now I can't get it to start again. I've reset the printer after trying everything i could think of but it still won't work. Help me please I'm at my wit's end! Teresa

Hi Teresa
Normally you would start the printer again by pressing the start jobs button in the print centre - the same button that you pressed to stop the jobs.
However, I have found on many occasions that this just doesn't work (still haven't found a reason why) - but this alternative generally does.
In the print centre. highlight you printer and then press the delete printer button. Now you have no printer. Close the print centre.
Open it again and do an Add Printer. Hopefully your epson will appear in the window. se3lected it andf do add and ho[pefully you problem will be gone.
Let us know if it works for you.

Problem with client side printing, please help its urgent

hi ,
am using struts and jasper reports on my project, now i was having problem that whenever i try to print the report , the printer dialogue box was appearing on server machine, i want it on client end, how to solve this problem, please any one know help me, it was urgent,
my code was like this
JasperCompileManager.compileReportToFile("c:/report/test.jrxml","c:/report/test.jasper");
JasperPrint jasperPrint = JasperFillManager.fillReport("c:/report/test.jasper"),parameters,con);
List l=jasperPrint.getPages();
if(l.size() != 0){
jasperPrint.setOrientation(JasperReport.ORIENTATION_PORTRAIT);
jasperPrint.setPageHeight(877);
jasperPrint.setPageWidth(963);
JasperPrintManager.printPages(jasperPrint,0,l.size()-1,true);
}thanks in advance,

Double post.

Problem in printer please help

I am using HP k209a, When I started my printer with or without connected to PC, all the lights (power light, warning light, plain A4, Ph.. ... plain A4, Photo A4, Photo 10x15 lights) are glowing (not blinking) and nothing happens

Hi @BrijRahul,
Welcome to the HP Forums!
I understand that all the lights are glowing on your HP Deskjet Ink Advantage k209a. I am sorry to hear this, but happy to help you with this issue!
I would recommend this guide, The HP Printer Won't Turn On or Respond When the Power Button is Pressed, as it deals with the fact that your printer is not responding once it is turned on.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Having problems with my HP C4280 photosmart printer Please help

For the last few days my C4280 has been acting weird,I go to print something very basic and it starts to print then stops then starts again then stops keeps doing this until its done with what I am trying to print. I have unplugged it and have uninstalled and reinstalled has not helped at all. What is wrong with my printer?:

Also it does this when I am just making a copy . Also like I said when printing something say my work schedule things like that it starts to print then pauses then prints the pauses til its done printing a simple paper. Its like its waiting for something thats all I can think of to ask for help. Do I need to just go buy a new printer???

Tile printing, please help!

Similar Messages

Maybe you are looking for