Tile Sliding Web App
Essentially this is the watered down version of a mock up for a web app.
I want to be able to slide the coloms and rows seperatly in almost a rubiks cube fashion.
Would this be possible to build in edge animate?
You can do it using JavaScript and jQuery within Animate. There's a lot of fancy data structures work you would need to do to store and shift each square, but once you have that all sorted, it's fairly trivial to actually move the squares. I know this is a very vague answer, but it's a very code-centric solution. Hope that points you in the right direction.
-Elaine
Similar Messages
-
Invalid element 'servlet' in content of 'web-app', expected elements [.....
I'm receiving the following error when I build a web app.
Invalid element 'servlet' in content of 'web-app', expected elements [.....
I have been trying to configure cactus struts testing as described here:
http://jakarta.apache.org/cactus/integration/howto_config.html.
I've a feeling it's a problem with my web.xml file (perhaps the order I have defined the elements) can anyone help?
My web.xml is as follows
<web-app>
<description>web.xml file for Scorecards Application</description>
<filter>
<filter-name>FilterRedirector</filter-name>
<filter-class>org.apache.cactus.server.FilterTestRedirector</filter-class>
</filter>
<filter-mapping>
<filter-name>FilterRedirector</filter-name>
<url-pattern>/FilterRedirector</url-pattern>
</filter-mapping>
<servlet>
<servlet-name>ServletRedirector</servlet-name>
<servlet-class>org.apache.cactus.server.ServletTestRedirector</servlet-class>
</servlet>
<servlet>
<servlet-name>JspRedirector</servlet-name>
<jsp-file>/jspRedirector.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>ServletRedirector</servlet-name>
<url-pattern>/ServletRedirector</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JspRedirector</servlet-name>
<url-pattern>/JspRedirector</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<taglib>
<taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
</taglib>
<resource-ref>
<description>SCR Production Data Connection</description>
<res-ref-name>jdbc/SCRproductionDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
------------------------------------------------------------------------------I don't think you are allowed to mix the servlet mapping entries in among the servlet entries. You should do all the servlet entries and then all the servlet mapping entries.
-
Access web app - Check if form is in edit mode
I want to hide some fields when a form is in edit mode but I can't figure out how to check that. I tried
That is not working. Is there another way to check the "state" of a form.
Thanks, MikeHi Mike,
Unfortunately, there is no existing method that I'm aware of to know if a view in an Access 2013 web app is currently in Edit mode or view mode. I can sympathize with you on this one since I’ve had many occasions in my apps where I wanted to use something
like this for various scenarios. I will pass along your feedback to the product team. You can set various properties on controls using macros, however, you cannot read control property values on views in Access 2013 web app views. The one exception is reading
values of data entry controls.
About the closest you can come to achieving you end goal would be to do a whole lot of extra work to control basic editing and save operations on that view. For example, you could create a new custom Action Bar button on your view with the same icon as the
existing Edit Action Bar button. Slide that one into the position you want in the Action Bar. For the On Click event of this custom one, you put the view into Edit mode, and then show the controls that you want (which are hidden by default I presume in the
On Load event of the view).
If you want to experiment with this technique, I would suggest trying it out on a copy of the view. There are a couple of caveats to this approach that I should point out. First, don’t delete the existing built in Edit and Save Action Bar buttons (or any
of the built in ones for that matter). Once deleted, you can never get them back. I am always in the habit of sliding ones I don’t want to the far right and then hiding them in the On Load event of the view. That way if I ever have a need in the future to
bring it back, the button(s) is still there for my use and all I have to do is remove the macro that is hiding it.
The second caveat is that once you put your view into Edit mode using your own custom Action Bar edit button and then click the save button to save the record changes, your hidden controls that you wanted to display on initial load will still show for the
next record. That may not be the behavior you want. In that case you would need to also create your own custom save Action Bar button too. In that On Click event, you would use the Save Record macro action and you would re-hide the controls that you want hidden
again for the next record since Access will automatically pop you back into view mode with the save operation. You’ll have to experiment with this if you want to try it. You might need to hide the controls before doing the Save Record action.
Hope that helps,
Jeff Conrad - Access Junkie - MVP Alumnus
Senior Content Developer - Modern Assistance and Support Experience - Microsoft Corporation
Author - Microsoft Access 2013 Inside Out
Author - Microsoft Access 2010 Inside Out
Co-author - Microsoft Office Access 2007 Inside Out
Access 2007/2010/2013 Info: http://www.AccessJunkie.com
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/en-us/legal/Copyright/Default.aspx -
Can not Deploy struts web app on WLS 8
Hi
We are trying to migrate the struts web app from WLS 6 into WLS 8, but keep getting
exception: org.apache.commons.digester.Digester startElement
When I use blank struts-config.xml, the web app can be deployed without exception.
but when I use the struts-config.xml we are supposed to use ( had been deployed
on WLS6 and WLS7 for production), I get the exception.
Please can anybody help? Thanks
Chun
Nov 3, 2003 10:00:35 AM org.apache.commons.digester.Digester startElement
SEVERE: Begin event threw exception
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(Property
Utils.java:1789)
at org.apache.commons.beanutils.PropertyUtils.setNestedProperty(Property
Utils.java:1684)
at org.apache.commons.beanutils.PropertyUtils.setProperty(PropertyUtils.
java:1713)
at org.apache.commons.beanutils.BeanUtils.setProperty(BeanUtils.java:101
9)
at org.apache.commons.beanutils.BeanUtils.populate(BeanUtils.java:808)
at org.apache.commons.digester.SetPropertiesRule.begin(SetPropertiesRule
.java:259)
at org.apache.commons.digester.Rule.begin(Rule.java:200)
at org.apache.commons.digester.Digester.startElement(Digester.java:1273)
at weblogic.apache.xerces.parsers.AbstractSAXParser.startElement(Abstrac
tSAXParser.java:459)
at weblogic.apache.xerces.impl.xs.XMLSchemaValidator.startElement(XMLSch
emaValidator.java:591)
at weblogic.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XML
NamespaceBinder.java:877)
at weblogic.apache.xerces.impl.XMLNamespaceBinder.startElement(XMLNamesp
aceBinder.java:569)
at weblogic.apache.xerces.impl.dtd.XMLDTDValidator.startElement(XMLDTDVa
lidator.java:727)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartE
lement(XMLDocumentFragmentScannerImpl.java:759)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentCo
ntentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocume
nt(XMLDocumentFragmentScannerImpl.java:329)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguratio
n.java:525)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguratio
n.java:581)
at weblogic.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXPar
ser.java:1175)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:138)
at org.apache.commons.digester.Digester.parse(Digester.java:1548)
at org.apache.struts.action.ActionServlet.parseModuleConfigFile(ActionSe
rvlet.java:1006)
at org.apache.struts.action.ActionServlet.initModuleConfig(ActionServlet
.java:955)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:470)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServlHere is the struts-config.xml. I only add
<form-bean name="batchQueryForm"
type="web.struts.batch.forms.BatchQueryForm"/>
into the blank struts-config.xml, then I get the exception
org.apache.commons.digester.Digester startElement
SEVERE: Begin event threw exception
Here is the struts-config.xml:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC
"-//Apache Software Foundation//DTD Struts Configuration 1.1//EN"
"http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<form-beans>
<!-- added for test -->
<form-bean name="batchQueryForm"
type="web.struts.batch.forms.BatchQueryForm"/>
<!-- test ends -->
</form-beans>
<global-forwards>
<forward
name="welcome"
path="/Welcome.do"/>
</global-forwards>
<action-mappings>
<action
path="/Welcome"
type="org.apache.struts.actions.ForwardAction"
parameter="/pages/Welcome.jsp"/>
</action-mappings>
<controller
processorClass="org.apache.struts.tiles.TilesRequestProcessor"/>
<message-resources parameter="resources.application"/>
<!-- comment following if struts1.0.x -->
<plug-in className="org.apache.struts.tiles.TilesPlugin" >
<set-property property="definitions-config"
value="/WEB-INF/tiles-defs.xml" />
<set-property property="moduleAware" value="true" />
<set-property property="definitions-parser-validate" value="true" />
</plug-in>
<!-- end comment if struts1.0.x -->
<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property
property="pathnames"
value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
"Deepak Vohra" <[email protected]> wrote:
>
Could you post your struts-config.xml file.
thanks,
Deepak
"Chun" <[email protected]> wrote:
Hi
We are trying to migrate the struts web app from WLS 6 into WLS 8, but
keep getting
exception: org.apache.commons.digester.Digester startElement
When I use blank struts-config.xml, the web app can be deployed without
exception.
but when I use the struts-config.xml we are supposed to use ( had been
deployed
on WLS6 and WLS7 for production), I get the exception.
Please can anybody help? Thanks
Chun
Nov 3, 2003 10:00:35 AM org.apache.commons.digester.Digester startElement
SEVERE: Begin event threw exception
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(Property
Utils.java:1789)
at org.apache.commons.beanutils.PropertyUtils.setNestedProperty(Property
Utils.java:1684)
at org.apache.commons.beanutils.PropertyUtils.setProperty(PropertyUtils.
java:1713)
at org.apache.commons.beanutils.BeanUtils.setProperty(BeanUtils.java:101
9)
at org.apache.commons.beanutils.BeanUtils.populate(BeanUtils.java:808)
at org.apache.commons.digester.SetPropertiesRule.begin(SetPropertiesRule
.java:259)
at org.apache.commons.digester.Rule.begin(Rule.java:200)
at org.apache.commons.digester.Digester.startElement(Digester.java:1273)
at weblogic.apache.xerces.parsers.AbstractSAXParser.startElement(Abstrac
tSAXParser.java:459)
at weblogic.apache.xerces.impl.xs.XMLSchemaValidator.startElement(XMLSch
emaValidator.java:591)
at weblogic.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XML
NamespaceBinder.java:877)
at weblogic.apache.xerces.impl.XMLNamespaceBinder.startElement(XMLNamesp
aceBinder.java:569)
at weblogic.apache.xerces.impl.dtd.XMLDTDValidator.startElement(XMLDTDVa
lidator.java:727)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartE
lement(XMLDocumentFragmentScannerImpl.java:759)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentCo
ntentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocume
nt(XMLDocumentFragmentScannerImpl.java:329)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguratio
n.java:525)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguratio
n.java:581)
at weblogic.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXPar
ser.java:1175)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:138)
at org.apache.commons.digester.Digester.parse(Digester.java:1548)
at org.apache.struts.action.ActionServlet.parseModuleConfigFile(ActionSe
rvlet.java:1006)
at org.apache.struts.action.ActionServlet.initModuleConfig(ActionServlet
.java:955)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:470)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(Servl -
Can't use {tag_itemid} in web app detail layouts
Hey gang,
I was trying to help someone implement a rating star system for their web app items and they wanted the ratings widget also to appear in the detail layout but for the widget to work they needed each item to have a unique id. It works fine for them in the list layout but the {tag_itemid} does not render in the detail layout. This is a third-party star ratings widget/service so they store the rating data on another server and each time they show the ratings widget it needs to be tied to a unique id. I suggested adding a "uniqueid" field to their web app but they intimated that having the client add/update a new uniqueid for each item (of which they have thousands) would be unmanageable.
I think this is a bug. Is there a reason we can't use {tag_itemid} in the web app detail layout?brilliant!
what is the usual timeline for a sprint Mario lol?
Defintely agree with Liam in that most of the tags/module tags for both the list and detail layouts should be universal as there are some situations where you need to use the tags dynamically to create outputs that need to be shown in both...
for example
I'm using a polldaddy rating system for a webapp currently and to get it to show up on each listing item separately requires a unique ID so using {tag_itemid} made perfect sense as it wouldnt break any polldaddy coding... however I cannot call the same rating system into the detail page (where it would logically be repeated) because I cannot replicate the same ID with no {tag_itemid} availble.
Asecond example is:
Since we had managed to put a readers upload gallery into a nice compact layout in the list layout using litebox and the ?Action=thumbnail feature the client really wanted to keep the photo gallery commenting system simple aslo (not to many steps) so ideally we would have liked to only ustilise the list-template and put the comment feedback tag in a sliding div (to show & hide it) so that readers could stay on one list page... but once again this wasnt possible becuase the {module_ratingfeedback} was not available in the list view (forcing us to make them click through to the detail page).
FYI: heres a sample link to what we had to put together in the end for the above - still slightly in development
http://www.nzhunter.co.nz/test-gallery
Anyway I think you get the idea - more flexibility and universal usage options for tags/module calls would be great.
Look forward to the updates at some point. -
Help, My web app has stopped working.
Hey guys, I got my N95 thru orange and i've had it for nearly two weeks now. The phone is great and until now I've had no trouble.
I've been using the inbuilt web app to access Orange world (Oranges mobile site, football, tv, etc etc) and all of a sudden it's stopped working.
I have contacted Orange and they have sent me a configuration message with the wap settings and they have also talked me through setting them up manually but it still hasn't worked. I also didn't think it was the settings that were at fault in the first place but they still talk you through it all anyway.
What happens is when I click onto the web app, the menu disappears as though the phone is about to launch into the web app itself and then straight away it returns to the phone menu. It doesn't even attempt to connect to any service at all. Just straight back to the menu.
I think maybe the app itself might be missing.
Can anyone help me out
Thanks
Davidif u have been using it ok up til now then it cant be settings problems, have u tried switching off the handset and removing the battery for a while if not then its a trip to a nokia service centre or u can set the handset back to factory settings yourself on the standby screen type *#7370# enter the lock code (default 12345) then fone will re start back to factory settings, be warned, back everything up if u can because u will loose everything!
Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95 -
Using Office Web Apps Server with SharePoint Foundation 2013
I want to know whether I can configure Office Web Apps server to edit Excel documents on a SharePoint Foundation 2013 site.
I came across a TechNet article that states that "When used together with SharePoint Server 2013, Office Web Apps Server provides updated versions of Word Web App, Excel Web App, PowerPoint Web App, and OneNote Web App".
However, later in the same article, it states "If your organization licenses Office 2013 through a Volume Licensing program, you can enable Office Web Apps editing for SharePoint 2013 on-premises" (without mentioning Foundation or Server).Hi Lemesnil,
The Office Web App server should support the Edit licenses for SharePoin Foundation 2013, Office Web App is free to
download, you can also try installing and configuring in a test environment, see more from the below article applied to SharePoint Foundation 2013.
http://support.microsoft.com/kb/2886404/en-us
http://blogs.technet.com/b/speschka/archive/2012/12/31/enabling-licensing-and-editing-for-office-web-apps-in-sharepoint-2013.aspx
Anohter useful article aobut how to license Office Web App server, you can take a look.
http://blogs.technet.com/b/volume-licensing/archive/2013/05/22/how-to-license-office-web-apps-server.aspx
Thanks
Daniel Yang
TechNet Community Support -
Hi,
I am using WebLogic 8.1 platform. I am trying to create a very basic secure web
app.
I created an App and created a web project. In it, I deleted the controller, etc
and just have index. jsp. All the index.jsp does is: <%= request.getRemoteUser()
%>
In web.xml I have
<security-constraint>
<web-resource-collection>
<web-resource-name>Success</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>*</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>default</realm-name>
</login-config>
<security-role>
<role-name>*</role-name>
</security-role>
In weblogic.xml I have
<security-role-assignment>
<role-name>dealers</role-name>
<principal-name>dealer1</principal-name>
</security-role-assignment>
When I run the app, it just renders the JSP and does not challenge me to login.
Can you please help what is that I am doing wrong here?
Thanks,
John"john hryn" <[email protected]> wrote in message
news:3fce2551$[email protected]..
>
Hi,
I am using WebLogic 8.1 platform. I am trying to create a very basicsecure web
app.
I created an App and created a web project. In it, I deleted thecontroller, etc
and just have index. jsp. All the index.jsp does is: <%=request.getRemoteUser()
%>
In web.xml I have
<security-constraint>
<web-resource-collection>
<web-resource-name>Success</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>*</role-name>I think you should have dealers instead of *
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>default</realm-name>
</login-config>
<security-role>
<role-name>*</role-name>And here too.
</security-role>
In weblogic.xml I have
<security-role-assignment>
<role-name>dealers</role-name>
<principal-name>dealer1</principal-name>
</security-role-assignment> -
Office Web Apps is not working
Hi,
We have tried to deploy Office Web Apps Server but, after a number of tests, we haven't been able to view PowerPoint presentations. We tested "everything" but it didn't work.
Finally, to simplify and focus the problem, we just deployed Office Web Apps Server "on its own", that is: just Internal URL, HTTP, Open From URL Enabled and sharing docs from a shared folder in the same server. So we have:
\\wacserver\share\<Docs> (Excel, Word and PowerPoint)
http://wacserver
They work both "/hosting/discovery" and "/op/generate.aspx".
If we try to view Excel doc, it works. If we try to view Word or PowerPoint, id doesn't work.
For PowerPoint, it appears the PowerPoint Web Apps frame (FILE, START SLIDE SHOW, SLIDE - OF -, NOTES...) and, in the center, an animation
"PowerPoint Web App .....". After a couple of minutes, it stops with "Either you've lost network connectivity or our server is to busy to handle your request".
What we have seen from different sources:
FIDDLER
======
/op/view.aspx?... Response 200
/p/PowerPointFrame.aspx?... Response 200
/p/imagehandler.ashx?... Response 202
13 petitions to /p/ppt/view.svc/jsonAnonymous/GetPresentation Response 200
PROCESS MONITOR
==============
There were some folders and registry keys Network Service was trying to access with ACCESS DENIED response. We gave it permissions and they disappeared.
SYSTEM is trying to access some registry keys (SpellingWcfprovider.exe => HKU\S-1-5-18, ImagingService.exe => HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options, and 2 or 3 more). It gets an ACCESS DENIED
but SYSTEM, we have checked, has "Full control" permissions in those keys or folders.
These errors appear by Office Web Server running itself, although we are not making a PowrPoint file request.
ULS
===
Several times, it tries to find the PowerPoint presentation in the caché, doesn't find it, manage to get it but, when trying to put it in the cache, it receives a disk space error:
Determined file name [PowerPoint.pptx] from [\\wacserver\share\PowerPoint.pptx]
AFileFetcher: Starting Unc download at [\\wacserver\share\PowerPoint.pptx]
Begining UNC Download for [\\wacserver\share\PowerPoint.pptx]
Reading next block of bytes for [\\wacserver\share\PowerPoint.pptx]
End reading block of bytes for [\\wacserver\share\PowerPoint.pptx]
Reading next block of bytes for [\\wacserver\share\PowerPoint.pptx]
End reading block of bytes for [\\wacserver\share\PowerPoint.pptx]
AFileFetcher: Done downloading file. [\\wacserver\share\PowerPoint.pptx]
Downloaded file from final URL [\\wacserver\share\PowerPoint.pptx] with SHA256 [Y/whX0EzCZJQdHym/OPrMdrNVg0h8SwrC0TehaKIQdU=]
AFileFetcher: Will cache web file info to memory cache. [\\wacserver\share\PowerPoint.pptx]
Starting WriteStreamToDiskCache
Creating channel to DiskCache: http://wacserver:809/diskcache/DiskCache.svc
MachineTransfer [SourceMachine:wacserver, SourceMachineVersion:15.0.4543.1000, TargetMachine:wacserver, TargetMachineVersion:15.0.4551.1011, Method:DiskCacheService.PutCacheData]
PutCacheData: [167F6AC792AE9B53BEA7CD135A35C18F0710CF5916C49DD5804C9E29CF9149CA55D1C8D1AD526B45B91801E1502B2BCD, d1c8d155-52ad-456b-b918-01e1502b2bcd, 50758, wacserver]
PutCacheData: Writing to C:\ProgramData\Microsoft\OfficeWebApps\Working\d\1CA\167F6AC792AE9B53BEA7CD135A35C18F0710CF5916C49DD5804C9E29CF9149CA55D1C8D1AD526B45B91801E1502B2BCD
Not enough disk space to write. Sleeping once.
Not enough disk space to write. Giving up.
PutCacheData Response: [False]
The cache folder has enough disk size and PowerPoint.pptx file is just 30 KB.
It repeats this flow 3 times (as for the first HTTP requests).
During the 2 minutes test (until it fails) there are 14 traces like:
Failed to create process object for pid 7780 with exception System.ArgumentException: Process with an Id of 7780 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId) at Microsoft.Office.Web.Common.RequestPipe.ProcessManager.TryGetProcessObject(Int32
pid).
We have tried a number of things but none has worked. The farm has just one server and it says ist's unhealthy. We have Windows Server 2008 R2 SP1. We have read some ways to fix the health, like HTTP Activation feature, but it only works
for Windows Server 2012 as fas as we know.
Has anybody experienced something like this or have a posible solution? Office Web Apps Server should be so easy to deploy but we have spent a lot of time with this.
Thank you very much. Your help will be very appreciated.
Kind regards.Hi John,
According to your description, my understanding is that you cannot view the PowerPoint files in Office Web Apps in SharePoint.
Was there any error when you view the PowerPoint files in Office Web Apps?
You can troubleshoot the error following the link below:
http://technet.microsoft.com/en-us/library/ff431687.aspx#tshoot
I also recommend to re-configure SharePoint to use the Office Web Apps Server to see if the issue still occurs.
http://technet.microsoft.com/en-us/library/ff431687.aspx#ConfigureMain
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
How can I use more than one Data Provider in my web Apps
I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.Hi,
You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data... -
Possible to have two login configs in same web app?
Sorry for not having tried this first, my server and webapp are in a state
of flux at this moment, but I wanted to see what the consensus is out there,
not just whether I can or cannot make something work quickly.
If I have two types of things that might be called in my Web App (WAR) in
different ways (eg, browser accessing via HTTP by users that want to login
via pretty forms, and SOAP clients that may access functionality through the
same servlets (but with alternate Servlet Path Info after the servlet name
in the URL)), is there ANY way I can have multiple login configs, each tied
to a different security constraint within that web app?
In other words, with a servlet of /frazzleblitz and security constraints
like:
<security-constraint>
<web-resource-collection>
<web-resource-name>Foo</web-resource-name>
<url-pattern>/frazzleblitz/doFooBar</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>FoobarBrowserUsers</role-name>
</auth-constraint>
</security-constraint>
and the SOAP constraint (for all users of incoming SOAP requests):
<security-constraint>
<web-resource-collection>
<web-resource-name>Foo</web-resource-name>
<url-pattern>/frazzleblitz/doFooBar</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>FoobarBrowserUsers</role-name>
</auth-constraint>
</security-constraint>
where my frazzleblitz controller knows whether the incoming request is
browser vs SOAP based by the path info after the servlet name
Can I associate the first security constraint with a FORM based login
config, and the second security constraint with a BASIC AUTH login config
since I could in theory require SOAP clients to send in credentials in a
HTTP BasicAuth header, but I can't expect a SOAP client to be HTTP
Redirected to a login form and then to enter the right credentials into a
user type form and then be redirected back to an app...
Seems to me the J2EE Security spec is really lacking in the area of
programmatic authentication (allowing my SOAP code to get credentials out of
the request envelope and call an API to login myself). Yeah, WebLogic has
the ServletAuthentication weak() API, but these apps need to be J2EE
compliant and work across J2EE servers... Anybody know of any improvements
coming in the J2EE security space to address such functionality needs?
Thanks in advance
MikeSorry, hit send accidentally before finishing the second security
constraint - I've fixed it up below to reflect what I meant...
"Mike" <[email protected]> wrote in message
news:[email protected]...
Sorry for not having tried this first, my server and webapp are in a state
of flux at this moment, but I wanted to see what the consensus is outthere,
not just whether I can or cannot make something work quickly.
If I have two types of things that might be called in my Web App (WAR) in
different ways (eg, browser accessing via HTTP by users that want to login
via pretty forms, and SOAP clients that may access functionality throughthe
same servlets (but with alternate Servlet Path Info after the servlet name
in the URL)), is there ANY way I can have multiple login configs, eachtied
to a different security constraint within that web app?
In other words, with a servlet of /frazzleblitz and security constraints
like:
<security-constraint>
<web-resource-collection>
<web-resource-name>Foo</web-resource-name>
<url-pattern>/frazzleblitz/doFooBar</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>FoobarBrowserUsers</role-name>
</auth-constraint>
</security-constraint>
and the SOAP constraint (for all users of incoming SOAP requests):
<security-constraint>
<web-resource-collection>
<web-resource-name>Bar</web-resource-name>
<url-pattern>/frazzleblitz/doSOAPRequest</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>SOAPUsers</role-name>
</auth-constraint>
</security-constraint>
where my frazzleblitz controller knows whether the incoming request is
browser vs SOAP based by the path info after the servlet name
Can I associate the first security constraint with a FORM based login
config, and the second security constraint with a BASIC AUTH login config
since I could in theory require SOAP clients to send in credentials in a
HTTP BasicAuth header, but I can't expect a SOAP client to be HTTP
Redirected to a login form and then to enter the right credentials into a
user type form and then be redirected back to an app...
Seems to me the J2EE Security spec is really lacking in the area of
programmatic authentication (allowing my SOAP code to get credentials outof
the request envelope and call an API to login myself). Yeah, WebLogic has
the ServletAuthentication weak() API, but these apps need to be J2EE
compliant and work across J2EE servers... Anybody know of anyimprovements
coming in the J2EE security space to address such functionality needs?
Thanks in advance
Mike -
Error while creating farm for Office web apps
Hello.
I have error while creating office web apps fars.
when I enter this code to powershell : New-OfficeWebAppsFarm -InternalURL "http://servername" -AllowHttp -EditingEnabled
It says this:
New-OfficeWebAppsFarm : The term 'New-OfficeWebAppsFarm' is not recognized as the name of a cmdlet, function, script
file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct
and try again.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalURL "http://office" -AllowHttp -EditingEnabled
+ ~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (New-OfficeWebAppsFarm:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
so what's the problem?That is an error I would expect with the account running the cmdlet not having local administrator rights to the server.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, AnuragHI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Error auto-deploying a Web App (.WAR file)
Hello,
Weblogic 6.1 throws a FileNotFoundException about 10% of the time for me when
auto-deploying a Web app. Has anyone else run into this? I searched the newsgroups
but didn't come up with anything, so I thought I'd start here.
My build/deploy cycle is managed by an Ant build file that creates a WAR file
of my web application and then drops it into $WL_HOME/config/mydomain/applications.
Occasionally when I do this, I get the error shown below. Originally I was building
the WAR file right in the ../applications directory, so I thought that might be
an issue. So, I started building the WAR file in a staging directory and copying
it into ../applications. No luck. Next, I tried deleting the original WAR file
from ../applications, and THEN copying the new one over from the staging directory.
Still fails occasionally.
Let's see. This is Weblogic 6.1 on Win2K. The only other thing is that my dev/build/staging
environment is on a network share, and it's from there that I'm copying the WAR
file to my local machine (where WL is running).
If someone has seen and/or knows what is up with this, great. If not, it's not
a show-stopper.
Thanks!
Cheers,
David
========================================================
<Apr 8, 2002 9:05:00 AM PDT> <Error> <Management> <IOException opening application
mydomain:Name=private-banking,Type=Application, loading from path .\config\mydomain\applications\private-banking.war
java.io.FileNotFoundException: error in opening zip file
at weblogic.management.mbeans.custom.Application.findType(Application.java:1833)
at weblogic.management.mbeans.custom.Application.adminLoad(Application.java:444)
at weblogic.management.mbeans.custom.Application.load(Application.java:387)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy8.load(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:840)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(ApplicationManager.java:1050)Michael,
This is a problem with 6.1 SP2 also -- a very annoying error. Without auto deploy
working properly, developers are spending alot of time waiting for WebLogic to restart.
HELP!!! we need this fixed.
I see the EXACT same stack trace (ERROR).
Tom Markel
Sr. Java Engineer
Michael Young <[email protected]> wrote:
Hi.
This may be a known issue that was addressed in sp2. If you are not already
at that sp level I suggest you upgrade.
Regards,
Michael
David Ventimiglia wrote:
Hello,
Weblogic 6.1 throws a FileNotFoundException about 10% of the time forme when
auto-deploying a Web app. Has anyone else run into this? I searchedthe newsgroups
but didn't come up with anything, so I thought I'd start here.
My build/deploy cycle is managed by an Ant build file that creates a WARfile
of my web application and then drops it into $WL_HOME/config/mydomain/applications.
Occasionally when I do this, I get the error shown below. OriginallyI was building
the WAR file right in the ../applications directory, so I thought thatmight be
an issue. So, I started building the WAR file in a staging directoryand copying
it into ../applications. No luck. Next, I tried deleting the originalWAR file
from ../applications, and THEN copying the new one over from the stagingdirectory.
Still fails occasionally.
Let's see. This is Weblogic 6.1 on Win2K. The only other thing is thatmy dev/build/staging
environment is on a network share, and it's from there that I'm copyingthe WAR
file to my local machine (where WL is running).
If someone has seen and/or knows what is up with this, great. If not,it's not
a show-stopper.
Thanks!
Cheers,
David
========================================================
<Apr 8, 2002 9:05:00 AM PDT> <Error> <Management> <IOException openingapplication
mydomain:Name=private-banking,Type=Application, loading from path .\config\mydomain\applications\private-banking.war
java.io.FileNotFoundException: error in opening zip file
at weblogic.management.mbeans.custom.Application.findType(Application.java:1833)
at weblogic.management.mbeans.custom.Application.adminLoad(Application.java:444)
at weblogic.management.mbeans.custom.Application.load(Application.java:387)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy8.load(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:840)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(ApplicationManager.java:1050)--
Michael Young
Developer Relations Engineer
BEA Support -
Exchange Office Web Apps Preview Does not work in OWA (web)
I have setup Exchange 2013, Lync 2013, SharePoint 2013, IIS as a Reverse Proxy Server, an Office Web Apps Server, etc, etc. Everything is setup to use SSl (https) and everything works great EXCEPT... Office Web Apps... and ONLY via Exchange and OWA (exchange
browser-based access).
I can login via the intranet or Internet for everything (SharePoint, Outlook, and Lync) and Office Web apps functionality works flawlessly for all... except for Exchange and OWA.
If I login in to a web-based Exchange seeion, everything works right and I can see the various attachments.
For all other scenarios, Office Web Apps works (SharePoint, Outlook, Lync, etc), but in owa (web version of Outlook) I see that Office Web Apps is triggered (I see the Office Web Apps text and the dots that indicate something is loading)... However, it just
crashes and eventually times out (see image):
If I look in the error logs for the Web Apps Server I see this:
Essentially, it looks like that owa uses a distinctly different path to load the attachments into the Web Apps Server such that the file is not found!
What is happening? Why does Exchange OWA (web version of Outlook) somehow use a different path that fails to locate attachments in Office Web Apps, but Lync, Outlook, and SharePoint (both in Intranet and Internet) work perfectly?
This is VERY frustrating. Can anyone help?
Please?
Clearly, the reverse proxy is working, the certificates are working, OAuth is working, etc. It seems there must be some variable/path that is only defined in Exchange for OWA that uses a different path for Office Web App attachments and that path is WRONG!
Please, help!
ThanksHi,
Thanks for sharing. It’s glad to hear the good news.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Maybe you are looking for
-
How to Open & Close the periods in Asset Accounting for Depreciation.
Dear All, How to to How to Open & Close the periods in Asset Accounting for Depreciation ? Please let me know If there is any T.Code or procedure for it. Your help is highly appreciated. Thanks & Regards, Pankaj.
-
Replace Navigationbar with UISegmentedControl
Hi friends, I am using navigation based application, in this i want to replace Navigationbar with UISegmentedControl i tried using below code -(void) viewDidLoad { NSArray *buttonNames = [NSArray arrayWithObjects:[UIImage imageNamed:@"email.png"],[UI
-
If I break my phone, how do I get a new one?
I tend to be a bit clumsy with my phone and drop them pretty often. I'm currently get rid of my Nokia E71 because the camera function no longer works. That being said, my buddy has a spare 3G Iphone that he could give to me. Lets say I break that one
-
Console errors re: free agent drive
I converted from Windows to Mac for my home computer and have been very happy. I noticed however that the computer has been slower recently. I did research on the internet and did things like repair disk permissions, zap PRAM, etc. Still is slow. I r
-
Does the SI_ID for 'User Folders' and 'Users' remains same in CMC?
Does the SI_ID for 'User Folders' and 'Users' remains same across the environments. For my CMS it is coming as 18 and 19 respectively. String siName = "User Folders"; // Users IInfoObjects rpts = iStore.query("SELECT SI_ID FROM CI_INFOOBJECTS, CI_SYS