Tile Vertically no longer works after Acrobat 10.1.10 update.

Is anyone else having the same issue?  I open 5-10 PDFs at a time, and then hit Ctrl-Shift-L to Tile them Vertically, and it Tiles them Horizontally instead.  Even choosing it directly from the menu (the slow way) doesn't work.  Tile Horizontally still tiles them horizontally, but that's not helpful to me.

so here is da answer
1. go to finder>(computer name)>macintosh HD>library>preferences
2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
3. restart mac and device which you share intenet to
then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
then, just wait for apple to release da 10.7.4 fixed
please use da steps!

Similar Messages

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • My car dock is no longer working after iOS 4.3.2 update...help!!

    I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

    Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
    Hope this helped

  • IPhone no longer works after iOS 5.0.1 update

    My iPhone 4 no longer recognizes its SIM card after updating from iOS 5.0 to 5.0.1.
    I followed the instructions in the article on the official Apple support site. Removing and reinserting the SIM card did not help, so I used iTunes to reset the iPhone.
    The result is that after switching on, the iPhone tells me that there is no SIM card in the slot (even if there there is) and that I should insert a SIM card with no PIN lock into the slot.
    I do not have a SIM card with no PIN lock.
    My phone company only distributes SIM cards with a PIN lock.
    What can I do now?

    I had this issue too. I did an OTA update.
    I tried turning off my iPhone, removed and reinserted my SIM and turning it on again a few times without success. I also inserted my wife's SIM, it was OK. When I tried with mine again, it was not. I also tried going in and out of Airplane Mode too without success.
    Afte a bit of trial and error, I finally got it to work.
    What I did was:
    1. Turn off WIFI.
    2. Turn off my iPhone.
    3. Removed and reinserted my SIM.
    4. Turned on my iPhone. Almost immediately I saw the  "3G" indicator and after a couple of seconds, my SIM worked!
    5. Turned WIFI back on.
    From my issue, it seems the iOS 5.0.1 update got "confused" with the network setup.
    HIH.
    Andrew

  • Prestage content no longer working after SCCM 2012 R2 CU1 update

    I run SCCM 2012 R2 CU1 on a Windows 2008 R2 server.
    I upgraded to CU1 in June, and today is the first time I've attempted to pre-stage a package since then.  After pre-staging my package and getting the content out to the target DP, I went to properties of the DP, checked the box "Enable this
    distribution point for prestage content", then hit Ok.
    Next I went to distribute the content to the DP, however after going thru the wizard, nothing changes.  There is no pending status, waiting on prestage content, that I had seen in the past when doing this task.  I can go in and run the wizard
    again, and the target DP shows up in the list, like I'd never initiated the push before.
    Normal (non-prestaged) distributions work fine.
    In troubleshooting this, I also noticed that I looking at the site status of the target DP, there are no status message entries for since I upgraded to CU1 (for that matter, none of my DP's have any entries since CU1).  I did see a similar issue like
    this in the forums
    http://social.technet.microsoft.com/Forums/en-US/9491c2b1-37e6-46e3-9bb0-c5d673490d8a/component-status-not-updating-since-upgrade-from-sccm2012-sp1-cu3-to-sccm2012-r2?forum=configmanagergeneral but I don't have a backed up stat.mgr\retry inbox, it's empty.
    I think this is related to why I can no longer prestage content, but I can't seem to find a reason for it.  The fixes for R2 CU2 don't mention my issue here either
    Anyone else seeing this?
    Tony

    Hi,
    Please check SmsAdminUI.log and Smsprov.log after you distribute the content to the DP.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

    Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
    Some other potentially relevant information:
    1- The Boot Camp icon is no longer present in the Windows System Tray.
    2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
    3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
    4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
    I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
    Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

    Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
    Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
    Will keep you posted on any progress I make.
    Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

  • Gmail no longer works after iOS 6.1.3 update

    I just updated my iPad 3 to iOS 6.1.3 and immediately noticed that when I tried to open the mail client, it would launch and shut off.  Turns out that I had to delete all of my gmail accounts and then the mail client worked.  I tried to add the gmail accounts back but now I get the following error:
    The IMAP server "imap.gmail.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field.
    The strange part is that I also updated my iPhone 5 and everything works fine, including gmail!  I check the setting between the two devices and they are the same.
    Apparently, many have reported these types of issues over the past few days.  However, I've yet to see a solution.  Apple hasn't seemed to have responded at all.

    JimHdk,
    Not sure what the issue is...like I said, my iPhone works fine with the 6.1.3 upgrade, the iPad doesn't...only after the updgrade.  Additionally, other's have reported the same issue with gmail.
    https://www.google.com/#hl=en&sclient=psy-ab&q=ios+6.1.3+gmail&oq=ios+6.1.3+gmai l&gs_l=hp.3...626.4887.0.5057.15.15.0.0.0.0.232.1902.4j10j1.15.0...0.0...1c.1.7. psy-ab.O_GfIONYv3U&pbx=1&bav=on.2,or.r_qf.&bvm=bv.44158598,d.dmg&fp=a4b1ae1098b9 eca0&biw=1486&bih=683

  • Wireless printing no longer working after installing HP 2.7 update

    I have been using wireless printing from my Macbook Pro (running Lion OSx 10.7.2) fine until yesterday when it just stopped working out of nowhere. From looking on the forums it appears that this is probably a result of the HP 2.7 update (which I also had the issue of continuously re-appearing in my software update list even after installing it multiple times - though i was able to resolve this courtesy of this forum). I've tried re-installing the printer multiple times and it works fine when connected via USB, it acnowledges that the printer is connected to the same wireless network as my computer bu

    OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
    I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
    Windows Registry Editor Version 5.00
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
    @="iTunes Class"
    "AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
    @=""C:\Program Files\iTunes\iTunes.exe""
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
    @="iTunes.Application.1"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
    @="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
    @="iTunes.Application"

  • Safari no longer works after the 10.5.3 Update.

    I'm apparently having the same problem with Safari that I've noticed many other people on here are having.
    When I try to open Safari after having installed the 10.5.3 Update it goes straight to "Application Not Responding" and I have to force it to quit.
    So I figured a fresh Safari 3.1.1. install would do the trick. However, when I try to install that it tells me "You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer." at the select a destination step.
    I haven't been able to solve my problem through the things I read in any of the other similar threads. Help?

    MacSavage wrote:
    I cannot create a new thread on this forum in Safari, however. It works in Firefox, but in Safari there is no button (link) to create a new thread.
    *Hi M'S', Welcome* to Apple's Users Help Users Forums.
    A bit of a puzzler there. The button to create a new thread is *not in Safari, it's on the forum page.* (Not the Categories page, a bunch of folders, a level too far back.)
    Good Luck, JP

  • FaceTime no longer working after 4.3.4 software update.

    I updated my ipod touch to 4.3.4 and ever since facetime no longer connects with the other person. I click call and it says the persons name and directly underneath it says "FaceTime..." as if it were calling the person, but it clearly is not. Somebody please help!

    You're not alone, we're having exactly the same problem, see this thread over here http://discussions.apple.com/thread.jspa?messageID=13197799. Exchange profiles with certs broken by the iOS 4.2 to 4.3 upgrade.

  • Links no longer work after signing document

    Links no longer work after signing document - I have updated to latest version and run installation repair, is this a problem or is it supposed to do that?

    Hi;
    This question would be best asked in the Acrobat signatures Forums, it is related to using Adobe Acrobat/Reader and does not have anything to do with the online service, Adobe Fill & Sign.  Someone should be able to answer your question here: https://forums.adobe.com/community/acrobat/security_%26_digital_signatures
    Thanks,
    Josh

  • Many Apps are no longer working after webOS 1.4 update! - please help!

    Hi,
    Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
    Here are the ones that just return a blank/white screen after launching so far:
    SplashID
    Daily Devo
    Daily Light (Love)
    Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
    These are just a few of the Apps that I am having problems with and there are probably many others.  I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
    Anyone else experiencing this issue as well with any Apps?
    Thanks in advance for any help that you can provide.

    SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password.  I see no update for it in the App Catalog.
    EDIT: Never mind.  It appears that it only did that on the first launch.  I closed it and restarted it, and now the screen in SplashID is correct.

  • HP OMEN Control Software No Longer Works After Windows 10 Upgrade

    HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

    I just purchased a new 2015 refurbished PC.  It worked great with Windows 8.1.   Upon installing Windows 10, The Omen control did not work as well as the fan.  Really - hardware failure.  Give us a break.  So, I went back to Windows 8.1. Also this year, I purchased an Envy X2.  This PC included a bluetooth keyboard that kept detatching.  Again - REALLY, the keyboard doesn't work.  That's a pretty important part of the PC.  I searched the forum for answers and all I found was the same old line that HP was working on it.  I found meesages over a year old that had this same  problem. So, back it went to Best Buy.  I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO.  Why - because they had to know about this issue alrady for quite a while.  And, they did not fix it.  I really hope they prove me wrong.!! I will give them 1 more week to fix it.  After that, the PC will be returned.  And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360.  To my amazement, I am even considering a MacBook Pro.  Funny thing - the Spectre X360 is supposed to be a great laptop,  But, Microsoft was heavily involved in the design process.  That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess.  TImes like these are opportuniies to win over customers or loose customers to the competiion.  I really want to keep this PC.  It is by your response to this problem that will determine the outcome.

  • I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

    I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

    There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
    When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Maybe you are looking for