TIlting problems. Please advice.

Hi i just got my iPhone 6 hours ago.
Everything was fine until i started to play games which uses tilt (e.g NFSU, DoodleJump).
For NFSU, my car turns left with my iPhone horizontal.
For Doodle, the character just jumps to the left crazily.
Basically, I have to tilt my iPhone to the right about 45 degrees just to offset.
Anybody can advice me what is happening and what i can do?

The law here in Portugal is that thet have 30 days to repair the device, if they pass 30 days they have to give a new device or the money, this is for all electronics here.
Well but anyway i was contacted today and my iPhone was ready!!! They replaced it with a new one. This is perfect! Loving it! Thank you!
Bought case Speck Candyshell in white cool one! Very pleased!
Message was edited by: nunomeneses

Similar Messages

HT3743 Iphone 4 unlocked by at&t i did a restore from itunes and get an error message "your request cannot be processed please try again after sometime" I tried for a week now but same problem, please advice

I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
Please kindly help me if i need to do someting to be able to activate and unlock my iphone4

Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing. I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt. Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had a phone since 25th december.

Oracle 10g agent installation problem -- please advice. Thanks.

I am trying to push an agent from a 32-bit CentOS 4.5 machine (where I successfully installed EM Grid Control with Database & that's working fine) to a 2-node Oracle 10g Clusterware/RAC, each machine has 64-bit CentOS 4.5. The questions I have are:
1. Is this mixture of 32-bit/64-bit possible?
2. When I am performing agent install, everything seemed to work (with manual root.sh execution provision) but at the end it's giving a message
"Failure Preinstall Script Not Executed, Install Is Failed. Run root.sh Is Not Executed, PostInstall Script Is Not Executed. Collection Logs Is Success."
And I don't see any agent* directory anywhere in any of the intended RAC Cluster nodes -- also, no error message log!
Clusterware/RAC versin: 10.2.0.3
EM Grid Control: 10.2.0.1
I have no clue what are the meaning of these!
Can somebody please tell me how to fix it (no upgrade suggestion please)?
Thanks in advance.

Hi,
I noticed that you'd like to install OEM Agent for 32bit on 64-bit machine.
Please look at the link below.
http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html#101x
Because OEM Agent on different platform are released separately.
eg.
For x86linux is Linux_Grid_Control_agent_download_10_2_0_2_0.zip
For Linux x86-64 is Linux_x86_64_Grid_Control_agent_download_10_2_0_2_0.zip
So could you please install OEM agent version for linx x86-64 ?
but I can not find OEM agent 10.2.0.1 version on link above. Do you have this version for 64-bit ?
Regards
Jason

Good coverage but the speed go down!!! Please Advice.

Hi all, i have a 4402 controller with 17 ap on line, i am using this system to give wireless service to several machine in a manufacturing plant, if i go to the terminal the coverage is very good but the speed on the card go down until only get 1 MB of speed. I am wondering if this is problem of overlapping, saturatio IT's a big problem., please advice.
Thanks in advance.

What are the datarates set to in the controller?
What are the power / channel settings set to?
If you are getting 1 Mbps speeds then you are most likely allowing them. Otherwise, you would be seeing holes in your coverage.
If you only allowed 11Mbps, then any spot where you are getting a 1Mbps datarate would theoretically, not work.
However, you advertise good coverage.
Now all this combined with the above mentioned noisy environment...
What were the parameters / results of the site survey?

HT201415 After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?

After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

HT201401 I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone, please advice what is the problem? Thanks

I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks

Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
Thanks

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

Sounds like a hardware issue. Bring the phone to Apple for evaluation.

Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Please advice how to resolve this problem. Thanks Best regards iPad 2, iOS 6.0.1

Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Can anyone please advice how to resolve this problem. Thanks
Best regards
iPad 2, iOS 6.0.1

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it

Please advice my problem on MusicPlayer

Hi.
I have created a MusicPlayer using AIR. The fuctionality is
like media player or real player. It working fine on everything.
But Problem is after install the .air application in my system it
is working very very slow and if we see the process for CPU in Task
manager it is showing like 94, 96 as the processing order.
Can i make my music player running fast. How can I overcome
this problem.
anyone please advice.
Thank you
Raj

Go to Finder>Applications and try opening the Mail app from there.
Next after you try open the Console app that is in Finder>Applications>Utilities and look for suspect log entries at that time and post them here

My iPhone 4 getting off automatically while battery 60% or more and turn on when i plug in please advice it is battery problem or hardware i use this mobile for 2 years and 3 month.

My iPhone 4 getting off automatically while battery 60% or more and turn on when i plug in please advice it is battery problem or hardware i use this mobile for 2 years and 3 month.
Thanking you.

1. you may have to take it in to Apple and get an out of warranty iphone for $199.
2. you can get your information from a backup of your phone. you do have a backup of your phone right either in iTunes or icloud. If you don't then your answer will be no.

Free characteristics Functioanlity is not working please advice

HI
I got an problem in the report with the multiprovider ZCOPA_M01
If I open the report for this multiprovider and there are 2 default characteristics displayed in the query and after removing the drill down for those two characteristics and Now IF I go to Free characteristics and do an drill down on one of the characteristic (for example: Geographical Type)and place an filter on the Geographical Region (Geographical region is also an free characteristic) now I find no values in the set filter screen.
But when I again remove the drill down on Geographical type and do an drill down on geographical region and set an filter on geographical region then you can see all the values...(In filter screen)
Can any one please advice me for the same. How to get values in the filter screen for this report with the Multiprovider ZCOPA_M01
Thanks in advance and will be rewarded with good points...

Hi,
Go to the definition of a Master Data Object. In its Attributes tab, there is a column of navigation on/off. There you can either swith on or off the attribute as a navigational attribute. After converting into navigational attribute, you can see the type column is changes to "NAV" from "DIS".
Hope this helps.
Regards,
Yogesh.
Edited by: Yogesh Kulkarni on May 27, 2008 4:14 PM

Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
(i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
thank you in advance
macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

Please advice, I have the HP dv8200 17 inch wide screen . the LCD monitor need to be change ?

Please advice ,, I find the LCD but the problem is there are 3 serial number and they all looks the same but the cables make them separate as single backlight and two backlight. I have all the information (s/n) ..
is there anyway to find which one is compatible without opening the laptop?
thank you

Hi,
Please check part # and cables layout from the following manual:
http://h10032.www1.hp.com/ctg/Manual/c00701888.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT3702 I tried to purchase an application with my credit but was told that payment is temporarily unavailable. Please advice.

I tried to purchase an application in App store, but after entering my credit card info, I was told that payment is temporarily unavailable. Please advice.

You need to go to ... iTunes support.
http://www.apple.com/emea/support/itunes/contact.html
Incidentally, there have been problems these last few days, particularly with Mountain Lion.

Tilt problem

i've read mostly all of the tilt problem topics and they all have the opposite problem that i have...
my new itouch 4 all of a sudden tilts w/o warning...
what i mean is.. when the itouch itself is stationed as portrait...
the screen just goes landscape...
gahhhh~~!!!
when its supposed to be portrait the itouch just goes to landscape RIGHT AWAY...
when i go online, turn on music (i cant get out of all the album covers...), facebook (i dont like to look at it landscape...), facetime (this is extremly annoying...), camera, messenger, games(like sky burger...).....almost everything that has the option of being used portrait or landscape ....
just automatically goes landscape...
i could just lock the lock the portrait orientation and make the landscape go away.... but...
isint there another way????
i think there's something wrong with the... thing in the inside...
please help me
thanks~! ^^

Welcome to Discussions, LaHee526
Your new iPod should be giving you pleasure, not problems, and Apple wants you to be pleased.
Return it to the retailer and have him make it right under warranty.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Workflow not comleted please advice

Hi Gurus,
We have created WF for sales order. when the sales order quantity is above a perticular quantity that sales order line item is blocked for dlivery and WF is triggered. MRP controller gets the mail to take a decision on this. he has to decide whether this quantity is to be taken from stock or convert the sales order to MTO.
We had one issue in production due to which the WF is not completed. The MRP controller has taken the decision but it is not reflected in sales order.
CAN WE AGAIN TRIGGER THIS WF OR CAN WE COMPLETE THE BROKEN WF?
Please advice
Thanks
S J
Moderator Message: Duplicate post locked
Edited by: kishan P on Oct 12, 2010 11:54 AM

Hi ,
Please hceck the below points
1. check the workflow log where it has been struck up some where and try to find the various ways to solve that problem
But please discuss with the corresponding person before doing any action in production
2. If the last workitem is dialog workitem and struck from long time then complete that step manually by using SWIA tcode (after the client approval)
3. If the last workitem is inprocess(Background workitem) then select the worktiem and
GOTO -> Technical workitem dispaly
EDIT-> CHANGE
check the options which is suitable for u
(Execute , complete manually , etc )
4. If the workflow is in error status then try to restart the workflow after error
Edited by: vijayareddy on Oct 13, 2010 1:48 PM

TIlting problems. Please advice.

Similar Messages

Maybe you are looking for