Tim Dashwood's presentation at FCPUG SuperMeet 2010

Tim Dashwood had a nice introductory presentation at FCPUG SuperMeet, during the NAB 2010. It dealt with low cost entry into the 3D stereoscopy, and his time was cut to only 15 minutes, but it was very efficiently presented, so lot of good information was transferred. A short video taken there can be seen here: http://www.vimeo.com/11013528 or here: http://www.youtube.com/watch?v=0NBfnI0h3Js . Thank you Tim for this and the cool Stereo3D Toolbox plug-in.

Similar Messages

What are the softwares or tools present default in TFS 2010

Hi,
1.What are the softwares or tools present default in TFS 2010?Whether SCVMM is present by default
2.What is the cost of upgrading to TFS 2012 from TFS 2010(VS ultimate version)?
3.In Team Foundation Administration Console,what is the purpose of Lab Management,Build Configuration(Build
Controller),Test Controller.Please guide me.
4.How to create template for automation?What is the need of template creation.
5.Whether I need to install build Controller & Test Controller for the lab Center to work in MTM.

Hi Nazimanasir,
For your questions, check the replies in below items:
1. Tfs is a dependent software, but have prerequisites for installation. And you may check MSDN pages to see the requirements like:
https://msdn.microsoft.com/en-us/library/dd578592(v=vs.100).aspx
If you want to know TFS architecture, you can refer to the
page for more information. And you can get started TFS 2010 from this
page. You have to install SCVMM if you want to use it to manage virtual machines
2. For the license issue, you might contact
http://www.microsoft.com/licensing/contact-us.aspx
directly for the better response, where specialized experts live in. You can also refer to the upgrade guide here:
http://vsarupgradeguide.codeplex.com/
3. With the Lab management, you can build and test in lab environment. Refer to this
page for more information about lab management. The build controller is for TFS build, and test controller is for testing which can be used to run test cases by MTM.
4. I'm not quite clear the template you mean, please elaborate more details. If you're saying build process template, then you can use the build process templates that accompany with the team project. If you mean process template, you can check them in process
template manager. You can also check this
page for more information about customize TFS process template.
5. Once you have setup your TFS machine, then you can configure build controller by following the instruction in this page:
https://msdn.microsoft.com/en-us/library/ee330987.aspx And check this
link for setting up test controller. For MTM related questions, you can also open a new thread in MTM forum for a better response.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

There are file hidden all around in your system.
Go to Phil Stokes' info page, for a gerat uninstall primer.

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

Presenter cannot find publisher 2010 on a PC running Win7?

Help please...Presenter cannot find publisher 2010, which is installed on my PC with WIn7 OS please advise

I can only respond to your original postings about Microsoft Publisher. Did you really mean Office? You threw us for a loop since we have no connection with Publisher!
If you have Microsoft Powerpoint 2010 32-it version installed, then Adobe Presenter 7.07 will install in trial mode. make sure you are using the Presenter Trial from this webpage:
http://www.adobe.com/products/presenter/
If you wanted to install the trial and you ran into this error, it usually means you used an older version of Presenter which did not support Office 2010. It also would occur if you installed MS Office 2010 64-bit version. Microsoft does not recommend end-users use the 64-bit version of Office. They recommend 32 bit Office. Please check that version.

How to I get my ipod connected to wifi for the first time..it's an ipod tough 2010 version, refurbished

how to I get my ipod connected to wifi for the first time..it's an ipod tougch 2010 version, refurbished

Hi,
To connect your iPod to wifi just:
     1. Open settings,
     2. Tap Wi-Fi,
     3. Make sure the Wi-Fi switch is on,
     4. Tap the network you would like to connect to,
     5. If the network has a password then type it in and press join.
For hidden networks(networks that don't broadcast their SSID(name))
     1. Follow 1-3 above,
     2. Tap other,
     3. Type in SSID(name) of the network,
     4. Select the security of the network,
     5. If there is a password type it in,
     6. Press Join.
Some public networks may now show a login screen where you may have to agree to terms and conditions, enter your email etc...

How to Combine Time Aliases into One Time Dim in Presentation Table

Hi,
As per the requirement I have created 7 time aliases and created joins to the fact in physical layer and the same in the BMM as well. I guess I’m correct till this stage.
However I want all the aliases to be combined into one time dim table so that only one time dimension will be available in Presentation layer Can I do it if yes what’s the process, now I’m showing all the time aliases in presentation which I don’t want to.
Please suggest me to solve this.
Thanks,
SMA

HI Arjun,
Please look at Sample Sales rpd "D0 Time" table(BMM layer) it was coming from different physical alias tables based on that how the hierarchy was built
Its not creating any attributes under the dimension so hoe to create the levelsRight click on hierarchy add Parent level and child level then pull the columns from your time dim to hierarchy
thanks,
Saichand.v

Have just loaded Safari 5.1. 4 times. It presents a blank page but will not load anything from the web.

Have just loaded Safari 5.1. 4 times. It presents a blank page but will not load anything from the web. What do I have to do to get it to work. It worked fine until the update was offered.

Funny thing, even this page was loaded and then quickly turned blank for me (I'm writing from Chrome).
Hope they fix it soon!

Is there any way to run a timer on the presentation screen during two consecutive presentations?

I administer exams that require running two consecutive presentations and interact with the person being tested. With each candidate we use two different presentations, so I can't just make only one presentation. Is there a way to have a timer display on the presentation screen through both presentations? Each person only has thirty minutes to get thru both presentations. If one only takes ten minutes, then they have twenty for the final one. I'd like to get away from using egg timers.

take a look at this thread, you can find some useful info about running old and some new games on Booklet there.

Embedding adjustable countdown timer into Keynote Presentation

I want to embed a timer similar to that on the iPhone into a presentation I am making. Please assist me. I am willing to use third party plug-ins etc..if necessary. I need to be able to set the timer! Thanks!

Video is video. You have to use another app to overlay something else. HTML 5, javascript, Flash. Can't be done in AE.

Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button

In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?

Hello,
In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
Thanks,
Shubhi

Alert set through timer job is not working in sharepoint 2010 as expected

Hi,
I create the standard sharepoint alerts through timer job.
in my timer job, i loop through a list and based on the user value in the alert to field i create alert for the users and the condition for the alert are only when new items are created and something changes in the below view.
all the properties are set fine. Email triggered on new items additions and on specific daily or weekly summary.
The view filteration is not working at all:(
But after the timer job ran and set the alert, if i open the alert settings on UI and without changing anything if i click ok , then the view filteration is happening and alerts are working fine.
What is wrong here? is it a bug or anything am missing?
Aruna
try
SPList Configlist = web.Lists.TryGetList("Configuration");
foreach (SPListItem oItem in Configlist.Items)
ProfilePicker = oItem["ProfilePicker"].ToString();
ProfileViewer = oItem["ProfileViewer"].ToString();
string MIS = oItem["MIS"].ToString();
SPList list = web.Lists.TryGetList(ProfileViewer);
SPList ProfileList = web.Lists[ProfilePicker];
foreach (SPListItem oItem in ProfileList.Items)
frequency = oItem["Frequenzy"].ToString();
created = (DateTime)oItem["Created"];
string createdDate = created.ToString();
createdDate = DateTime.Parse(createdDate).ToShortDateString();
DateTime today = DateTime.Today.Date;
string dateonly = today.ToString(); ;
dateonly = DateTime.Parse(dateonly).ToShortDateString();
SPFieldUserValue fieldValue = null;
SPFieldUser UserColumn = (SPFieldUser)oItem.Fields.GetField("Alert_x0020_owner");
fieldValue = UserColumn.GetFieldValue(oItem["Alert_x0020_owner"].ToString()) as SPFieldUserValue;
if (fieldValue != null)
alertowner = fieldValue.User;
alert = alertowner.ToString();
//if (createdDate == dateonly)
SPUser user = web.EnsureUser(alert);
SPAlert newAlert = user.Alerts.Add();
newAlert.AlertType = SPAlertType.List;
newAlert.List = list;
newAlert.DeliveryChannels = SPAlertDeliveryChannels.Email;
newAlert.EventType = SPEventType.Add;
if (frequency == "Daily")
createDailyAlert(newAlert, list, user);
else
createWeeklyAlert(newAlert, list, user);
catch (Exception ex)
// Danfoss.Sharepoint.Logger.DanfossLogger.LogToOperations(ex, "Exception occurred in setting the profile alert", 0, EventSeverity.Error, DanfossExceptionCategory.General);
private static void createDailyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My Daily Profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Daily;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Daily Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Daily Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Daily")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
private static void createWeeklyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My weekly profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Weekly;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Weekly Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Weekly Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Weekly")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
This is my code. alerts are not sending based on the view:(

Hi sathyaav,
I followed the example and made a test in my environment, it works like a charm.
I suggest you check if you have inputed the valid site URL when you create the project solution.
If you deployed succeed in the Central Administrator Site using Visual Studio, then the job named "Simple Job Definition" will appear in the job definition list.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Request time out - zip file processing in sharepoint 2010

Hello All,
I have developed web part that uploads the zip package file and then programmatically zip will extracted and all files will uploaded to picture library.
If zip files are larger then it gets request timed out error..in production server.
Currently in web.config executionTimeout="600". I can not increase it on production server so comfortably...
However, with this same settings functionality works well in QA and dev environment.
How to find the proper justification for this... I do not have access to any of the environment.
Thanks,
Saumil

if it will take long time it's better to do this process asynchronously using Async application Page , also you might need to check the request length as well
check the asynchronous page example
http://msdn.microsoft.com/en-us/magazine/cc163725.aspx
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

Date selection will not print properly when using Microsoft Date and Time Picker Control 6.0 in Excel 2010

I have created a field input worksheet in which the user identifies start and end dates for training sessions, using the Date and Time Picker Active X Control. It works fine on-screen, but when the worksheets are printed, the dates that were selected
using the date picker calendar print out in an unreadable, huge font. The large font also appears in the print preview mode. I've tried modifying various properties in design mode, but nothing that I have tried will correct the problem.
Any ideas?

The DTPicker seems to have some bugs in it when used on a worksheet. I have overcome the above by setting the size properties to the same size as a cell and the Linked cell property to the
cell under the DTPicker. (Even setting the Linked cell had problems with an error message referring to the Check box property to be set to true so I just set it to true and inserted the linked cell and set the checkbox property back to
false.)
Then the VBA code below that Hides the DTPicker after a date is selected and unhides the DTPicker when the linked cell with the date is selected. The code is for 2 DTPickers so you will need to edit to suit your requirements.
Caveat: If the DTPicker is visible then you can't hide it by selecting the same date again. If this occurs then it is a multi step operation. First select another date and the DTPicker will hide, then click on another cell then back on the cell with
the date to unhide the DTPicker and then select the correct date.
Hope it helps and feel free to get back to me with any questions etc.
Private Sub DTPicker1_Change()
    Me.DTPicker1.Visible = False
End Sub
Private Sub DTPicker2_Change()
    Me.DTPicker2.Visible = False
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    Select Case Target.Address
        Case "$E$5"     'This is the linked cell for DTPicker1
            Me.DTPicker1.Visible = True
        Case "$E$13"    'This is the linked cell for DTPicker2
            Me.DTPicker2.Visible = True
    End Select
End Sub
Regards, OssieMac

Time machine backups present on disk but not seen

Hi. I just notice that on my macbookpro time machine is keeping creating the hourly backups, but I cannot see them anymore from the time machine interface.
All backup files seem to be on the disk, but whenever I enter the time machine I can only see the last one, as if I started the time machine for the first time.
Any idea why this is happening? And, more important, any idea on how to fix it?
I'm on a macbook pro with OS X 10.8.5; the time machine files are stored in an external USB disk.
Thank you for your support.

shuusaku wrote:
Hi. I just notice that on my macbookpro time machine is keeping creating the hourly backups, but I cannot see them anymore from the time machine interface.
All backup files seem to be on the disk, but whenever I enter the time machine I can only see the last one, as if I started the time machine for the first time.
Any idea why this is happening? And, more important, any idea on how to fix it?
I'm on a macbook pro with OS X 10.8.5; the time machine files are stored in an external USB disk.
Thank you for your support.
My TM did this after the upgrade to 10.9
When I first set it up, I just clicked to use the same drive I had been using, even though I'd just formatted it.
Apparently that causes the backups not to appear in the app.
So, here's what finally resolved it. I:
1. Opened Time Machine Preferences.
2. Turned Time Machine off.
3. Clicked "Select Disk...".
4. DELETED the TM disk I had previously selected.
5. Reformatted the TM disk once again.
6. Reopened Time Machine Preferences.
7. Reselected the newly formatted disk from the list.
8. Turned Time Machine back on, and let it begin backing up.
When I opened it the next morning, I had seven backups in the app to choose from.

Tim Dashwood's presentation at FCPUG SuperMeet 2010

Similar Messages

Maybe you are looking for