Time and clip duration not the same ???

I got a clip with 3 correction layer above of same lenght and I toggle from one another and they shows 9;09 in info all excepts video clip which shows 9;10, but on timeline they are same lenght and show in info same In and Out TC. Also, when I go in Time by right-clicking clip, Time indicates 9;09.
As my AE smoke dope or is this known bug?
Which do I trust in ?
The Cs4 on the machine in updated to last patch and has Cineform ProspectHD on it.

There's no bug here. If you go to the end of the clip in AE you'll be at the last frame. Go 1 more frame and you'll be at the end of the clip. This is where the confusion comes. If you were butting together to clips in AE then the first frame of the second clip would start when the preceding clip ends, IOW at the end of the clip.
Dropping a clip in an empty timeline or dragging it into the new composition icon creates a composition exactly the same length as the clip, but the frame number of the last frame is one less than the length of the comp.
Maybe the confusion arises because you're not counting bananas, you are measuring time. 60 bananas are 60 bananas because you started with a banana, but 60 seconds is a minute because you started with no seconds. The last second in a minute is the 59th second. When that second is over the minute is up.
In Premiere, or any other NLE, when you go to the end of a clip you don't see that clips last frame, you go to the first frame of the next clip. This makes sense because you wouldn't want to overlap the clips by 1 frame. When you go to the end of a comp you see the last frame, but the frame number is one less than the length of the composition. This also makes sense because you wouldn't want to the render to have one blank frame at the end of the movie.
I hope this clears things up.

Similar Messages

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing what can i do???

Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing. What can i do???

This may provide the answer:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears

I'm trying to download a purchased app but it keeps telling me my apple ID has been disabled. I've changed my password 3 times and it still says the same thing. what do I do?

I'm trying to download a purchased app but it keeps telling me my apple ID has been disabled. I've changed my password 3 times and it still says the same thing. what do I do?

Contact itunes support.

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Simpli Home Artisan : TV Stand and Coffee Table : Not the same color. HELP

Hello,
I ordered and received the Simpli Home Artisan TV Stand from the BestBuy website. We got it a couple weeks ago, put it together and love it.
We decided to order the matching Simpli Home Artisan Coffee table to go with it. We just picked it up today and it is not the same color at the TV stand.
Both item listed on the BestBuy website say they are "Medium auburn brown" in color, as do the boxes we recieved. However they are not the same color, the TV stand is much darker than the coffee table.
TV Stand: http://www.bestbuy.com/site/simpli-home-artisan-tv-stand-for-most-flat-panel-tvs-up-to-54/1622137.p?...
Coffe Table: http://www.bestbuy.com/site/simpli-home-artisan-collection-coffee-table/1860306.p?id=1219066204317&s...
If you go to the Simpli Home manufacturer website you will see that Artisan collection comes in two different color tones, "Available in Auburn or Tobacco Brown".
Simpli Home Website: http://www.simpli-home.com/#!wood---artisan-coffee-table/cuhk
The TV stand we got is Tobacco Brown, and though the color does not match the pictures on BestBuy.com, we liked it and decided it was okay, but not if the coffee table doesn't match.
I really don't care if I get Tobacco Brown or Medium Auburn, I just want them to match. However since I've already assembled the TV Stand, I would like to return the coffee table and get one that is Tobacco brown.
I posted this to the forum because I know if I call the store they won't have a clue what I am talking about.
Please let me know what I should do, and help me if you can.
Thank you
Solved!
Go to Solution.

Greetings rtb1980,
I can definitely understand why you would choose both of those pieces of furniture as they look wonderful, but of course it would be a chronic annoyance if the furniture didn’t match. Using the email address you registered with the forum, I was able to take a look at your purchase history and the items on our site as well as the manufacturer’s.
As we get all of our information about the products directly from the manufacturer, it would seem that you received the wrong color TV stand, and that you would have received the correct color for the coffee table. As these items are special ordered items, meaning the orders are not fulfilled directly by us, it is difficult to say where the mix up may have occurred with your TV stand, for which I am truly sorry.
That being said, it does not appear that we carry the coffee table in the tobacco brown color you are looking for. Sadly, this means we would be unable to provide you an exchange for the tobacco color, although you should be able to return the coffee table within the Return & Exchange Policy. However, we should be able to provide you with an exchange of your TV stand for the correct color to match the auburn colored coffee table you received; although, I understand that this may not be the ideal resolution, as it may have been the more complicated piece of furniture to put together.
I apologize for any inconvenience this experience may have caused you. If you should have any questions, or need any further assistance, please do not hesitate to reach out to me.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

My iPhone serial number and IMEI is not the same as Apple server

Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco Marzabal

Here we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies

Personal area and EE subgroup of Infotype 01 and 77 are not the same. Help!

Hi All,
Good day.
I read your thread here and I guess we have a common problem. Can I ask for your help?
I run the program RPURACU0 to update the new race and ethnicity data in infotype 77. But why it changed the Personnel Area and Employee Subgroup. Only the race and ethnicity codes should have been changed and not the Personnel Area and Employee Subgroup.
Please help me what causes these discrepancies in data.
Example:
In PA20, enter personnel number 7600634. Personal area = US81 and EE Subgroup = U0. But when displaying infotype 77 the Personal area = US02 and EE Subgroup = U1.
The personal area and EE subgroup of infotype 01 and 77 should be the same. In this example, they are not the same. Please help me to find out what causes this problem.
Please reply asap because this problem should be solved immediately.
Thanks in advance.
Carina

Hi GRM,
Thanks for your reply.
I checked the date from the table and I found out that:
P0001-ENDDA not equal P0077-ENDDA
P0001-BEGDA not equal P0077-BEGDA
Please reply asap.
Thanks,
Carina

Firefox will not fully load and run anymore just out of the blue when I click to run it it just sits and does not respond I have totally uninstalled and reinstalled this many times and it still does the same thing why would it stop working?

When I booted my computer up from cold and click firefox to run it sat there and tryed to load instead it sits there and does the nor responding thing. I have totally uninstalled the program a few times and re installed a new download and the same thing happen. I can not run firefox any longer and i have run it everyday for a very long time. This seems to be the only program with an issue.

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

Getting error messege i tunes was not installed properly. you may not be able to import cd . please reinstall itunes. i have done this several times and i still get the same messege

i have taken itunes completely off my computer and redownloaded it several times and keep getting the same messege and not i am getting a messege that itunes needs a repair and i click yes for the repair and nothing happens,

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi

Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/

HalberdBlue wrote:
Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
jutapa

I lost My Icloud Id and it's not the same as in the Apple Id also I do not Security questions

I have Lost My Icloud and cannot know the Email with Icloud, however I have access to My Apple Id, I want to change my Security Questions and rescue email,I do not know the answers of my Questions I made them Long time Ago.Also I do not have an Apple Devices now,Because I sold it so it's a very hard case I have.

Hi yehiafromnull,
If your iCloud account isn't the same as your Apple ID, you may have multiple Apple IDs set up (all iCloud accounts are associated with an Apple ID). If you are unclear what it may be, you may find the information and steps outlined in the following article helpful:
How to find your Apple ID - Apple Support
If you need additional assistance resetting the password for any of your Apple IDs, then this article may also be of use:
If you forgot your Apple ID password - Apple Support
Regards,
- Brenden

Unrendered Audio - sequence and clip settings are the same

When I drag a clip to the timeline a redline appears on the top of the timeline. I know this means that there is a setting issue between the sequence and the clips. All the settings are the same with the exception of the:
audio format - Clip: 8 bit integer
Seq: 32 Bit Floating
Audio Rate - Clip: 48000 5kh
Seq: 48.0 KH
The clips which is 1 1/2 HR takes 6 minutes to render.
Does anyone know why I need to render this clip?
Macbook Pro Mac OS X (10.4.8)

Here: a foolproof way to ensure clip-sequence settings match up:
http://web.mac.com/steelepro/iWeb/steelecuts.com/fcs%20detective/6FD1D5FD-0C56-4 F06-992C-902D00556549.html
And if you still have the problem, why not convert it to AIFF via QT?

Indesign CC for Mac and PC are not the same?

I have creative cloud on a Mac and a PC. I cannot open the Mac Indesign files on the PC and it's frustrating. The whole point of getting Adobe CC was to be able to work on both platforms. The Mac version of Indesign is showing as 9.2.1 and the PC version is showing as 8.0.2. If you're never going to get the PC version the same, how can I revert the Mac back down to 8.0.2 so the files will be interchangeable?

I just saw where CC is only available for Windows 7 and higher and I am NOT upgrading XP so CS6 is all I can have on the PC. I'm downloading CS6 for the Mac now, so from now on my files should work on both.

Time and clip duration not the same ???

Similar Messages

Maybe you are looking for