Time and date doesn't update nor can I set it manually, any help?

I just purchased a apple TV, it is connected via a ethernet, IP address detected however, it won't update the time nor date I can't do it manually any help?

Doesn't any bring up the fact that Apple has so many customers with problems that the refuse to help unless you pay them cash? They update you and screw you over and then offer no useful troubleshooting scenarioius to help their millions of customers. It is because they want millions of our dollars. I hate Apple.

Similar Messages

Downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

Connect your iPhone, iPad, iPod touch, and Mac using Continuity

I'm in the activation process for setting time and date but been stuck in that screen for a while please help

just installed my Apple TV and it's been in the activation screen to set time and date for a while .
not sure what the issue is

It's not properly connected to the network
Make sure location is set correctly
DNS should be on auto (settings - general - network)
If on wifi try Ethernet
Check that router has port 123 open (refer to manual if unsure)

I can't set up time and date / no response or it s...

Hi guys
I hope You will help me.
I purchased nokia 5800 (second hand) for my girlfriend this christmas as a present and everything is fine apart 'time and date settings'.
When you going to 'setting' and try to select 'date and time' there is no reaction, if you trying open by clicking 'options' and than 'open' it appears straight away 'System error' message or if you trying do it from the home screen/desktop by clicking on the clock 'System error' message appears straight away.
It is very confusing and driving me mad as this is christmas gift and she can't set up time and date.
I've tried update software using Nokia Software Updater and nothing
I've restored factory setting and nothing as well.
Please help me
Thank You very much for Your time
Kind regards
Martin
Solved!
Go to Solution.

Hi monpar77
If you are using restore factory settings in "Phone management" due to UDP = User Data Preservation feature of this device that may not be sufficient and you may need to carry out a "hard reset" as detailed elsewhere in the forum.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Inserting current time and date in a form

Feel silly here, but I can't seem to find a way to insert form fields that will display currnet time and date, I see where it can be done for a digital signature, but that's not what I need. This is for a client sign in sheet. I want to know what date and time the form is printed, without having to manually enter that data. Thanks.

Actualy, looking around the web I found another Adobe forum where you answered another person's question about using a check box to populate a text field with the date, which is actually what I really need, as I want to be able to print the form with or without the date and time appearing. Here's the script you posted:
// Mouse up script for check box
{function () {
     // Get a reference to the text field
     var f = getField ("text");
     // Set the value of the text field
     if (event.target.value !== "off") {
          f.value = util.printd("mm/dd/yyy", newDate ());
          } else {
                f.value = " ";
I copied and pasted the code straight into the mouse up event for the check box, and then changed the text box name to the actuall name of the date text field, and the error I get is "too much recursion".

Time and Date (again) over DV

Hi everyone, thanks for the help with my last problem.
As expected though I have anther one with regards to a similar issue of time and date taken from a video camera.
I would like to record footage on DV, either MDV or Digital 8 and transfer it to computer using FireWire, I would like the footage to playback the time and date overlays from the camera (as seen in view finder / LCD) so i can record them to computer.
Is this possible with DV, i have tried enabling all options concerning this feature on my camera, but i still can't see the time and date through FireWire connection to the computer.
Are there any FCP settings or specific camera settings you guys know of?
Thanks for all your help, regards, Jim.

Jim
You can not capture the time/date onscreen via FireWire.
You have 3 options:
1. Buy/install a capture card with analog AV inputs.
2. Make a DV copy by connecting analog AV out/inputs.
3. Buy/connect a external analog>FireWire converter, for example this one:
http://www.canopus.com/products/ADVC55/index.php
In all cases, you have to use the analog output from the DV player/camera to display the time/date info.
Hope this helps.
Marce.

HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

Uninstall and re install for few times and it doesn't work at all!
Are you (currently) getting an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

HT4623 After updated to iOS 7.1.1, my iPad went wrong with time and date. How can I solve this?

I have updated my iPad mini to iOS 7.1.1 recently. After updated, it went wrong with time and date even I tried to restart it or set manual time/date or set auto time/date. How can I solve this problem?

Hello Phirum OL,
Here is an article that will help you adjust the date and time settings on your iPad:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Learn the steps to take if your device has any of the following issues with the date and time.
Incorrect date or time
Wrong time zone being set automatically
Issues related to automatically switching with daylight savings time
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can we display Cube update time and date

Hi All,
can we display Cube refresh time and date for user with out going into the Cube properties. Can we use any substitution variable for that?
Another doubt----
Will there be any systen defined default substitution variable in Essbase or anly user defined variables. IF there what are they and purpose of it?
Regards

After the successful cube building, you can capture the time stamp from the system into a variable and you can set the note on database.
suppose below is the maxl script updatetime.mxl
login $1 identified by $2 on $3 ;
spool on to $4 ;
alter database $5.$6 set note $7 ;
logout ;
spool off ;
exit ;
you can call the script like
essmsh updatetime.mxl <<userid>> <<pwd>> <<server>> <<spoolfile>> <<appname>> <<dbname>> <<updatetime>>

TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

My iPad 2 wifi keeps rebooting , and it doesn't update the battery status . Can anyone help me with this one?

My Ipad 2 keeps rebooting and it doesn't update the battery status anymore.
Here is the error
Incident Identifier: D729F1DF-6960-4847-A6C3-75351A67AE9B
CrashReporter Key:   c7e1a298a42fc9bbb41b4ed79ff29a1655de12a6
Hardware Model:      iPad2,1
Date/Time:       2013-02-16 02:58:06.115 -0800
OS Version:      iOS 6.0 (10A403)
CRC ERR!
I had this problem for quiet sometime now, and I would really appreciate your help. THANKS

I did try restoring the ipad a couple of times and it didn't do the trick. I also tried updating the firmware.
The only thing that worked for a while when the ipad - on it's own - rebooted itself into a black screen with white text and automatically fixed the issue. It worked perfectly for a couple of months but it came back after I forgot to charge the ipad , does anyone know how I can force the ipad into that screen again ?

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Update time and date with server time..?

Hi.. All
every login ,flash get server time from php. how can i update time and date in flash..?

I'm going to only show the month example, the rest is fairly straightforward:
<?php $month = date('n'); ?>
var date:Date = new Date();
trace(date);
date.setMonth($month);
trace(date);

Time and date doesn't update nor can I set it manually, any help?

Similar Messages

Maybe you are looking for