Time and Date Issues

Ok every time I turn on my iPod Touch its the wrong date and time! I have no idea whats going on. But ever sense I bought simcity this has been happening!! Then at about noon it changes to the right time and date! Thanks A lot for your help!

F Shippey wrote:
Say WHAT? That's totally ridiculous advice.
it USED to be true. but the ipod touches contain a different type of battery to the older ones, which actually benefit from 'topping up' the charge regularly rather than letting it run down.
Message was edited by: Anna Sandham

Similar Messages

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

TS4526 Found a fix for the time and date issue

ROKU GEN 3

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

Time and Date keeps changing

Every time I connect my ipod touch 2.1.1 the date and time keeps changing. is it a glitch? i also tried restoring my ipod but it didnt help, so please fix this

Thanks. This solves the time and date issue. But I still have a problem when I do the following: Settings>General>Time & Date, then the main screen (with all of the icons) is displayed, I never see the time, date screen, it goes back after about 1 second to main screen The same thing happens when I do the following: Settings>Mail, Contacts, Calendar>I then scroll to the bottom of the page and I get the main page again. I never get to touch on contacts or calendar, only mail. Please help.

Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
I'm guessing Apple thinks only Time Travellers need to ask what year it is...

I am trying to find an app that will track the usage on my iphone with times and dates to see what was accessed on my phone when I was away from it and what if anything was done eg deleted messages viewed facebook etc?

Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
Messages received
Messages deleted
Facebook viewed
Messages viewed
Internet viewed and what?
I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
Thank you!!

No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.

HP Officejet Pro 8600 fax confirmation time and date fields has all zeros

My fax confirmation sheet for the time and date of my HP Officejet Pro 8600 prints all zeros. How do I reset the time and date for this function?

Hello rschne,
Welcome to the HP Forums.
I see that you are having an issue with the date and time being all zeros on the fax confirmation.
Is the time and date set on the front display of the printer?
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Write me back when you have time and I will be happy to assist further.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

TIme and Date keep changoing

I am running the New 21.5 iMac with 10.6.1 and bootcamp with windows 7. My time and date keep changing, going forward 2-3 days and changing from AM to PM. This happens when I boot into Windows 7 or put it to sleep. I tried setting it to use the Apple NTP server and setting it manually, but neither keep it correct. Also, this is another issue, the display drivers do not offer the highest or correct resolution in Windows 7, it only shows a generic VGA display adapter in device manager.
TIA for any help!

Hello d:
Welcome to Apple discussions.
I do not use Windows on my Macs (and have no intention of doing so). Having said that, there is a forum for people who do here:
http://discussions.apple.com/forum.jspa?forumID=687
Barry

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Importing video help! Need Time and date to show up on screen...

SOMEBODY HAS TO HAVE AN ANSWER!
Okay, little background... I just got a new Mac book pro lab top. First time apple user. Difficult to learn, but learned fast. I am working with IMovie HD program, got the hang of it. I have a Cannon ZR50 camcorder, mini DVR tape. Camera has DV,S, USB, AV etc.. port outs. Hooked it up to lab top to import video to lab top to edit footage add sound etc... to later burn to DVD via IDVD program
BTW: I used a DV to Firewire cable to load up footage.
PROBLEM I AM HAVING. is when I'm importing my video to the computer, time and date stamp from my camcorder's screen does not show up on Mac screen. It gets lost when importing. How I view it on my camcorder (SHOWING TIME/DATE INFO ON FOOTAGE TAKEN) is how I would like to view it after importing it to lab top to later edit ad sound tracks etc... If I hook up my camcorder to a VHS or TV, to record on tape of footage taken, Time/Date stamp of footage shows up and records on tape with no problem.
I spoke with a lot of people on this issue. Everyone refers me to someone else. I can't get an answer for something in my eyes is so simple. They all said " Why would you want the time and date stamp to show up on your footage anyway" Well I would like it to be that way. Topic got down to three things that might solve problem. 1. Need better video/editing software. 2. Need Digital Analog capture device. 3. Need new camcorder. I've been working on this problem for a day or so. It's getting rough for help. Any information on this problem would be great. If you need any more info on my issue please do not hesitate to Pm me. Thanks

Hi SIZ4SK:
Welcome to discussions!
You can't do that with iMovie but you can with a bit of help from a third party...
What you really need is this free plugin from TriX Software:
DVFileDateCM
http://www.trixsoftware.com/DVFileDateCM.html
Let me know if this helps or not.
Sue

Time and date on the laptop is not in accordance with the current.

1. Product Name and Number
HP G42-360TX
2. Operating System installed (if applicable)
Windows 7 64-bit
3. Error message (if any)
Time and date on the laptop is not in accordance with the current
4. Any changes made to your system before the issue occurred
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
Time and date on the laptop is not in accordance with the current. I've tried to change it manually, but it will change back to yesterday's date.
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
whether it was the CMOS battery is weak? when I bought the notebook in 2011

Have you tried setting it to synchronize with an internet clock...click the date in the lower right corner...change date and time settings...internet time. Also check the time zone.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

Lumia 620 time and date

why does my 620 keep changing the time and date at random times of the day ?

Hi, vicki1979. Have you tried to perform basic troubleshooting steps like rebooting your phone or making sure that your phone's software is up-to-date?
http://www.nokia.com/global/support/software-update/wp8-software-update/
If the issue remains, you can try to reset the phone. However, we recommend creating a backup file to avoid any data loss:
Settings > About > reset.
Let us know the outcome.

Time and date problems

Since I updated my iTouch to v 2.0, it's been having problems keeping the date and time. It usually reverts to 7 days ago and about 6 hours earlier. I had no problems when using v 1.1.4
Has anyone else had these problems?

In many cases, this occurs when you connect your iPod to the computer when iTunes has an incorrect backup date. I recently experienced this issue as well, and was able to fix it with little difficulty. Here's what I did.
1. Disconnect your iPod from the computer.
2. Make sure that the time and date on your computer is correct.
3a. In iTunes, go to Edit => Preferences => Syncing.
3b. You should see your device listed there, along with that same $#%& incorrect date and time. Select it and press "Remove Backup".
4. Close out of and reopen iTunes.
5. Reconnect your iPod. It will create a new backup to replace the one you just deleted, with the (hopefully) correct date and time, and your iPod's date and time will change to mirror that of your computer's.
I hope that helps!

Nokia E71 time and date problems.

I cant ever set the time and date of my nokia E71. Anytime i access the time and date settings, it just doesn't go through. Please help me out.

Hi Faces1,
Welcome to Nokia discussions board!
In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
Then try to set the time and date again.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Time and Date Issues

Similar Messages

Maybe you are looking for