Time axis for FM GRAPH_GANTT

Hi friends,
where can I affect the contents of the time axis for the FM GRAPH_GANTT ?
Thank You for Your helps in advance !
Regards Peter

Hi Peter,
that's not possible.
Instead of using this very old function module please use the chart engine. See also my reply Two Dimentional graph in ABAP.
The chart engine provides a set of different chart types, e.g. a GANTT.
The content of the time axis can be changed within the customizing XML. See also note 1065389 that describes different time formats.
Regards, Kai

Similar Messages

Error: Inappropriate data for continuous time axis while displaying in Time-series Line in OBIEE

I wanted to use time series line in my analysis but I couldn't get What kind of data is required for this graph? It shows inappropriate data for continuous time axis. I had total amountmin vertical axis and time(year) in horizontal axis.

Check this if not helpful then follow 2 links at bottom
OBIEE - Time Series Conversion Functions : AGO and TODATE | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)
~ http://cool-bi.com

How to set date format dd.MM.yy for chart time axis

Is it possible to set default date format dd.MM.yy instead of MM/dd/yy in Flex charts without using label function ?
In this case we do not know beforehand the length of the time span; it can be minutes, days or weeks.
Setting locales in compiler options or locale settings for application seems not having any effect.

For example
- mx:Barchar
- if time span is 4 minutes; time axis format is HH:mm and shows 10:00, 10:01, 10:02, 10:03 ; *this correct*
- if time span is 5 days; time labels are automatically in MM/dd/yy format; question is how to change this automation
to format dd.MM.yy
- how to do this *without* dateformatter and *without* coding "if time span is is longer than day nyt less than week then use dd.MM.yy format" ?

Vertically sync time position for two or more 2D axis systems?

In DIAdem: VIEW,
Is it possible to vertically sync the time position for two or more 2D axis system charts placed above each other?
I have displayed several channels on one 2D chart, and one channel of particular interest on a separate chart above, which was very easy to do. It would be really useful to sync the time position on both charts, such that scrolling one chart also scrolls the second chart, or zooming one chart also zooms the second chart to the same area, which seems like a fairly basic thing to want to do, but I haven't found a way to do it yet.
Any help greatly appreciated!
Solved!
Go to Solution.

Hi Brad,
Yes, I have been using that method, which works fine up to a point.
But, say you have several curves displayed on the bottom chart, with the Y-Axis set to "n Y-axes", then the start of the x-axis will be further across to the right than the top chart which has only one curve displayed.
It is possible to add an empty area to the left of the top chart, to push the start of the x-axis across into alignment (see attached), but every time you add or remove a curve on the bottom chart, or the scale changes enough to add a digit, the start of the x-axis moves and the top chart needs aligning again.
I'm really after a method to lock both ends of both x-axes to the same vertical screen position, so everything stays aligned automatically?
Attachments:
chart - full.JPG ‏152 KB
chart - detail.JPG ‏145 KB

How do I graph multiple bit values on one time axis?

I want to graph multiple bit values, all of which will change back and forth from 0 to 1, on the same time axis, but I don't want any visual overlap between the different bit value traces. Now I could do this by graphing bit one as either 0 or 1, bit 2 as 2 or 3, bit 3 as 4 or 5, etc., but I would really rather have multiple Y axes showing 0 to 1, stacked vertically on the same time (X) axis.
You could visualize this as multiple pens on a strip chart continuously recording different values. Each pen has its own vertical area in which it writes, but all pens could be writing data from the same numerical range.
Hmmm... I think my description might be roughly as clear as mud, but if anyone out there can figure out what I am asking and has potential solutions, please let me know.
Thanks!

Thanks. I will look at that VI, but I think I have already seen it. My problem is that I have CAN data coming in for an hour or so, but the time interval between receiving specific CAN arbitration IDs varies, so I want to plot the X axis against specific, varying time values, not a standard dT. I'm not sure I can do this on a digital graph, but I haven't given up hope yet.
BTW, I am receiving 8-byte CAN packages. Some of the bytes represent actual values, but I need to break others up into individual bit values to see error and status flag settings. Once I break the bytes into bits, I convert from analog values to digital values.

Want a constant time axis in waveform chart

hello,
my time axis in waveform chart is changing .how can i keep it constant say 1-100 .the whole point of this is to make waveform chart luk like a CRO.please need help.
thanks in advace
naveen.rabelli

I don't think what you're asking for is possible, due to the nature of the chart - it accepts Y values and inserts the X value automatically. Offhand, I can think of 3 solutions -
The bad one - constantly change the offset by moving it backwords. You will probably have flickering.
The workaround one - Paste a text box over the first number saying 1 and another over the second number saying 100.
The probably most correct one - Use a XY graph. Just have a 1D array of 100 elements and append it to a second 1D array with 1..100. Wire the 2D array into the graph terminal.
Try to take over the world!

Time axis is empty

Hi! I've always been using TM without any problem, but now I can't find a solution to this strange behavior. Some days ago I tried to enter TM to see my backups, but I noticed that no backup was available, or more precisely the axis contained only "Now". No older backup. Browsing the content showed various folders, but nothing could be opened (it kept saying the item was deleted). Anyway, I erased the partition and started again from the beginning my backups. 30GBs were transferred to the disk, folders were in the partition, but still entering TM showed a time axis with only "Now". No backup is available. Tried again the same, but still, after many backups, I can only see "Now" and all the windows beside the one in front are black. No way to have any backup even if data are transferred to the disk. Any idea what could be wrong?
Thanks!
EDIT: Very sorry, I noticed I posted in the forum for MacOSX 10.5, but I have 10.6.2.
Message was edited by: Luc4

Luc4 wrote:
OK, I can see some files which have been backed up, for example I have one from my directory Documents. I went there, and entered TM, but no backup is shown, only "Now".
Good - now we know where to look!
We've already covered whether you're starting from something like an empty desktop, or a Finder window pointed to something else that's empty or wasn't backed-up. But be sure you start from somewhere that shows those Documents.
If still no help, try exiting from TM, then immediately going back exactly as before. This happens occasionally, but your problem seems more consistent.
If that doesn't help, try the things in #E4 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
It seems the first backup, which is 40GBs in the disk, is reported to be 0bytes in TimeTracker.
Yes, Time Tracker works by comparing the backup you select with the previous one, so the very first one can't be shown.

Actual Time bar for the activity duration in Gantt Chart

Hi all,
The Actual time bar for the elapsed activity duration in Gantt chart is not appearing. The same is true for all the activities i.e. activities which are not yet confirmed and activities which are partially confirmed.
Is there any customizing for the same? ( I am getting the bar in IDES, but not in DEV/QAS/PRD )
Any Help in this regards will be highly appreciated
Warm regards,
Srinivas Potluri

Hai Srinivas
Got the solution.
1)For this first check in the project profile of the Hierarchry graphic -
Time scheduling profile - check the colour patterns which been assigned.
2)open the project - Cj20N - go to planning board - bar chart - under settings - Planning board assistant - Gantt chart - check the dates display for Project definition , WBS , Acitivity - try to change the colour and check.
while changing can see - basic date of the acitivity. based on the confirmation can see the bar confirmed activity with respect to basic date. the bar confirmation will show withrespect to duration.
3) If the bar chart need in daily /hourly - can check in CNE5 . click on the graphics -bar chart - which u will get the bar chart - in this choose the Time Axis - where can select the monthly /weekly/daily /hourly format .
Award points if clear and got the solution.
Regards
PP

Is there a way to change the time of a saved data to be as the same as the time-axis of the waveform graph?

Hi,
I've a problem while saving the waveform to a spreadsheet.
The problem that I'm facing is that I'm not able to save/change the time-axis of the waveform graph into the excel spreadsheet.
The attachments below are what I've programmed on.
1st file that would be asked to save is the results of the waveform.
2nd file, supposing to be the time-axis
3rd file, is the multiplication of results of CH 1 and CH 2.
Would be glad if someone can enlighten me with a solution which is suitable for LabView version 8.2 and Tektronix DPO 72004.
Thanks. ((((:
Attachments:
Modification of 2 CH waveforms (Multiply and Sum).vi ‏63 KB
Modification of 2 CH waveforms (Multiply and Sum) Front Panel.JPG ‏220 KB
Modification of 2 CH waveforms (Multiply and Sum) BD.JPG ‏92 KB

I've saved it as text file which could be read if I open it with excel spreadsheet.
My aim is to get the time-axis (x-axis) in the file rather than to get the date and time in the file.
The attachment is the waveform results that I've obtained.
Attachments:
waveform vaule.txt ‏433 KB

Size marker and time axis scatter graph

1.Can we increase default size of marker in scatter graph?
2.Also, for the time axis can we format the date to be able to show (mm/dd/yyyy) for all the values on axis rather than just the first one ?

Hello,
I still didn't find a solution.
I can show the data in the bar graph or in line graph, but not in scatter graph. In the scatter graph, there could be set for x and y axis just number values.
But is it really not possible to create the graph with time x-axis and number(or string) y-axis?
Has our customer so special requirement? Or is there no answer because it's so easy?
In the previous post, I've forgotten to write that my version is 11.1.2.1.0.
Regards,
Qjeta

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

Can I use my time capsule for a hard drive only?

I have a brand new Time Capsule.
Instead of backing up all of the time, can I just use the Time Capsule for my music and photos?

Music and Photos would be fine.. but not itunes and iphoto.. the libraries are far more complex and if you load it onto the TC you will have no backups.. the TC is a backup device which has no method of backing itself up.

END ROUTINE to calculate time differnce for two corresponding dates

Hi All,
I have to write an END ROUTINE in which I have 2 DATE FIELDS (e.g. DATE_1, DATE_2) and corresponding TIME fields (e.g. TIME_1, TIME_2).
I have to calculate difference between the TIME fields for the two dates and populate a TIME_DIFF field.
Can someone pls help me by posting sample code as i am new to BI.
Thanks in ADVANCE!!!

End Routine:
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine and Expert Routine
Thanks..
Shambhu

Can I hook up a windows computer to my airport time capsule for internet access?

We have hooked up our time capsule for the first time today. It works wonderful on our apple products BUT can I connect a windows based computer to it for internet access?

Yes. Both Ethernet and 802.11 are cross-platform.
(109122)

My recirculating pump in sub vi simulation link doesnt work in the second iteration .It opens for maybe half a second whereas i gave the time delay for 5 secs..plz help very urgent

Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi ‏223 KB

Rami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn

Time axis for FM GRAPH_GANTT

Similar Messages

Maybe you are looking for