Time axis is empty

Hi! I've always been using TM without any problem, but now I can't find a solution to this strange behavior. Some days ago I tried to enter TM to see my backups, but I noticed that no backup was available, or more precisely the axis contained only "Now". No older backup. Browsing the content showed various folders, but nothing could be opened (it kept saying the item was deleted). Anyway, I erased the partition and started again from the beginning my backups. 30GBs were transferred to the disk, folders were in the partition, but still entering TM showed a time axis with only "Now". No backup is available. Tried again the same, but still, after many backups, I can only see "Now" and all the windows beside the one in front are black. No way to have any backup even if data are transferred to the disk. Any idea what could be wrong?
Thanks!
EDIT: Very sorry, I noticed I posted in the forum for MacOSX 10.5, but I have 10.6.2.
Message was edited by: Luc4

Luc4 wrote:
OK, I can see some files which have been backed up, for example I have one from my directory Documents. I went there, and entered TM, but no backup is shown, only "Now".
Good - now we know where to look!
We've already covered whether you're starting from something like an empty desktop, or a Finder window pointed to something else that's empty or wasn't backed-up. But be sure you start from somewhere that shows those Documents.
If still no help, try exiting from TM, then immediately going back exactly as before. This happens occasionally, but your problem seems more consistent.
If that doesn't help, try the things in #E4 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
It seems the first backup, which is 40GBs in the disk, is reported to be 0bytes in TimeTracker.
Yes, Time Tracker works by comparing the backup you select with the previous one, so the very first one can't be shown.

Similar Messages

How do I graph multiple bit values on one time axis?

I want to graph multiple bit values, all of which will change back and forth from 0 to 1, on the same time axis, but I don't want any visual overlap between the different bit value traces. Now I could do this by graphing bit one as either 0 or 1, bit 2 as 2 or 3, bit 3 as 4 or 5, etc., but I would really rather have multiple Y axes showing 0 to 1, stacked vertically on the same time (X) axis.
You could visualize this as multiple pens on a strip chart continuously recording different values. Each pen has its own vertical area in which it writes, but all pens could be writing data from the same numerical range.
Hmmm... I think my description might be roughly as clear as mud, but if anyone out there can figure out what I am asking and has potential solutions, please let me know.
Thanks!

Thanks. I will look at that VI, but I think I have already seen it. My problem is that I have CAN data coming in for an hour or so, but the time interval between receiving specific CAN arbitration IDs varies, so I want to plot the X axis against specific, varying time values, not a standard dT. I'm not sure I can do this on a digital graph, but I haven't given up hope yet.
BTW, I am receiving 8-byte CAN packages. Some of the bytes represent actual values, but I need to break others up into individual bit values to see error and status flag settings. Once I break the bytes into bits, I convert from analog values to digital values.

Error: Inappropriate data for continuous time axis while displaying in Time-series Line in OBIEE

I wanted to use time series line in my analysis but I couldn't get What kind of data is required for this graph? It shows inappropriate data for continuous time axis. I had total amountmin vertical axis and time(year) in horizontal axis.

Check this if not helpful then follow 2 links at bottom
OBIEE - Time Series Conversion Functions : AGO and TODATE | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)
~ http://cool-bi.com

How to set date format dd.MM.yy for chart time axis

Is it possible to set default date format dd.MM.yy instead of MM/dd/yy in Flex charts without using label function ?
In this case we do not know beforehand the length of the time span; it can be minutes, days or weeks.
Setting locales in compiler options or locale settings for application seems not having any effect.

For example
- mx:Barchar
- if time span is 4 minutes; time axis format is HH:mm and shows 10:00, 10:01, 10:02, 10:03 ; *this correct*
- if time span is 5 days; time labels are automatically in MM/dd/yy format; question is how to change this automation
to format dd.MM.yy
- how to do this *without* dateformatter and *without* coding "if time span is is longer than day nyt less than week then use dd.MM.yy format" ?

Want a constant time axis in waveform chart

hello,
my time axis in waveform chart is changing .how can i keep it constant say 1-100 .the whole point of this is to make waveform chart luk like a CRO.please need help.
thanks in advace
naveen.rabelli

I don't think what you're asking for is possible, due to the nature of the chart - it accepts Y values and inserts the X value automatically. Offhand, I can think of 3 solutions -
The bad one - constantly change the offset by moving it backwords. You will probably have flickering.
The workaround one - Paste a text box over the first number saying 1 and another over the second number saying 100.
The probably most correct one - Use a XY graph. Just have a 1D array of 100 elements and append it to a second 1D array with 1..100. Wire the 2D array into the graph terminal.
Try to take over the world!

Is there a way to change the time of a saved data to be as the same as the time-axis of the waveform graph?

Hi,
I've a problem while saving the waveform to a spreadsheet.
The problem that I'm facing is that I'm not able to save/change the time-axis of the waveform graph into the excel spreadsheet.
The attachments below are what I've programmed on.
1st file that would be asked to save is the results of the waveform.
2nd file, supposing to be the time-axis
3rd file, is the multiplication of results of CH 1 and CH 2.
Would be glad if someone can enlighten me with a solution which is suitable for LabView version 8.2 and Tektronix DPO 72004.
Thanks. ((((:
Attachments:
Modification of 2 CH waveforms (Multiply and Sum).vi ‏63 KB
Modification of 2 CH waveforms (Multiply and Sum) Front Panel.JPG ‏220 KB
Modification of 2 CH waveforms (Multiply and Sum) BD.JPG ‏92 KB

I've saved it as text file which could be read if I open it with excel spreadsheet.
My aim is to get the time-axis (x-axis) in the file rather than to get the date and time in the file.
The attachment is the waveform results that I've obtained.
Attachments:
waveform vaule.txt ‏433 KB

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

Lets start over...
Please restart the network.. shut down everything..
Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
Does the TC show up in Airport utility? Are you running wireless or ethernet?
If you still have issues.. plug the TC directly into the computer by ethernet.
Do a full factory reset of the TC.. and see if it now shows up.
Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
You take a screen shot of the TC opened in finder.
eg..
My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture.

Size marker and time axis scatter graph

1.Can we increase default size of marker in scatter graph?
2.Also, for the time axis can we format the date to be able to show (mm/dd/yyyy) for all the values on axis rather than just the first one ?

Hello,
I still didn't find a solution.
I can show the data in the bar graph or in line graph, but not in scatter graph. In the scatter graph, there could be set for x and y axis just number values.
But is it really not possible to create the graph with time x-axis and number(or string) y-axis?
Has our customer so special requirement? Or is there no answer because it's so easy?
In the previous post, I've forgotten to write that my version is 11.1.2.1.0.
Regards,
Qjeta

Graph time axis start zero

Hi
I acquire signals from a USB card (N signals), I use de DAQmx Analog input (NchanelsNsamples) ,I dont know how i can start the time axis at zero..
please you can help me
thanks

Hello Alexandra,
If you are using a graph, you have just to double-click on the first value to change it.
If I don't answer your question, please give me more information.
Regards.
Jean-Baptiste C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Téléchargez dès maintenant toutes les présentations techniques !

Time axis for FM GRAPH_GANTT

Hi friends,
where can I affect the contents of the time axis for the FM GRAPH_GANTT ?
Thank You for Your helps in advance !
Regards Peter

Hi Peter,
that's not possible.
Instead of using this very old function module please use the chart engine. See also my reply Two Dimentional graph in ABAP.
The chart engine provides a set of different chart types, e.g. a GANTT.
The content of the time axis can be changed within the customizing XML. See also note 1065389 that describes different time formats.
Regards, Kai

Chart question with, I'm sure, a simple answer (That I can't seem to figure out). Fixed 'time frame' on time axis.

Hello all.
I'm using charts to record data coming from vibration sensors on a bearing testing rig.
The problem I have (or rather the users have) is that the chart seems to only show a minute or so 'window' of data and it moves along through the day that way. Adding a scrollbar on the axis helps, but doesn't give a real 'picture' of a specified time range.
We'd like to have the time range of the chart be about 12 hours. Is there a simple way in properties that you can set the chart to show 'last X amount of time'? Or at least something greater than a minute!
Thanks for bearing with me. There seemed to be several posts sorta similar to this, but none really addressing the exact issue.
Still confused after 8 years.

Hi Ralph,
> I'm really, really confused.
Don't feel alone, this was not obvious to me either.
Here is an example in LV 8.5
You can set the log interval and the number of hours to be displayed.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
chart time.vi ‏20 KB

OSX 10.6.8 to 10.8.2 - Time Machine is empty!

Hi all,
I just updated OSX 10.6.8 to 10.8.2.
To my surprise, Time Machine is now empty. No back up files from previous OS X 10.6.8 appear to have survived the upgrade.
Am I in trouble? Or is there a way of retriving previous backups?
Thanks for your help!
Y

Thanks for this but no, it didn't help.
What worked was following somebody else's advice...disable 'put hard disks to sleep when possible' in the Energy Save System preference. But I'm crossing fingers. I have no idea why it's working now.
It's absurd Mountain Lion is so clumsy in recognising something as crucial as Time Machine's previous back up. Neadlessly stressy. You shouldn't have to fiddle in the hard disc to make this work.
Thanks for everybody's help. Wish me luck.
Y

SignalExpress 2010 - Chart time axis format will not change to floating point or anything else

I just downloaded and installed the new and shiny SignalExpress 2010 to replace the old version. And immediately run into major problems:
The x-axis time format refuses to change to floating point or scientific even if I choose them from chart properties. The format is always absolute, e.g. 12:23:54.743. This makes the usage of the chart and the whole application impossible! Is this a known issue and is it going to be fixed soon? And where can I get the old version of the SignalExpress (2009) so I can install it again?

Here is a screenshot of the problem:

Plotting Data on a fixed time axis from left to right

I am plotting data on a Historical Trend graph from the DSC palette. I receive the data from a plc throughout the course of a production shift. I would like to have the start time of the shift (07:00) on the far left of the x-axis and the end time of the shift on the far right (15:30). I would like to plot the data from left to right as the shift progresses. Is this possible? How do I format?
Many thanks for any input,
Stuart Wilson

Hi Stuart,
All you need to do is place down a waveform chart and then modify the properties slightly in order to achieve this. If you right click and make sure autoscaling is turned off on the x-axis first of all, then go into the properties page and change the x-axis formatting to absolute time then you will be able to plot data with the actual time according to your system clock.
The only problem you have now is that there probably isn't enough room on the chart to plot data for the entire time between 09:00 and 15:30 depending on how often you want to sample. The default number of data points to keep in the chart is 1024. Therefore if you try and change the max and min values to 09:00 and 15:30 then it won't allow you to set that up as it doesn't think you have enough room there. Right click on the chart again and go down to Chart History Length. Increase this number to a large enough number and then you will be able to set the start time to 09:00 and the end time to 15:30 and as long as autoscaling is turned off this will not change.
Hope this helps, please find the attached example which will plot random numbers to a chart once a minute and the chart will plot data between these times.
Best regards,
Peter H.
Applications Engineer.
NIUK.
Attachments:
Large Chart.vi ‏16 KB

ADF DVT's time Axis Date Format

Hi, I've been working with DVT line graph and bar graph.
Was able to display details and apply time selector.
The details that can be displayed in the graph is dynamic, meaning the number of bars or columns that will be displayed in the graph can be smaller or bigger.
I just noticed that the Date Format that appears in the X-Axis is not consistent, sometimes is display the dates as day (01, 02, 03.. etc.) then month under it.
but sometimes the format is "mm/dd/yy". Is there a way to make the date format consistent?
Thanks.

hi experts, any idea please...

Time axis is empty

Similar Messages

Maybe you are looking for